Flashing light in Wrotham supply. And not working wi-fi..

Hello.
Flashing light in Wrotham supply.
And not working wi-fi, or rather does not recognize the access point.
They are not on the list .
But the access point is at hand.
Please send me the answer to email (Personal information removed by Moderator)

Hi @Game_Developer
Welcome to the HP Support Forums!
I understand that you are having trouble with wifi connectivity. What light is flashing on that supply? I assume it is the power supply.
Have you tried your notebook with a different wireless network?
Do other devices connect to your router without any trouble?
I would start with this to make sure the wireless is working properly on the notebook, or appears correctly in device manager.
Resolving Universal WLAN, Wireless, and Wi-Fi Errors
And only after verfying that all is good, would you want to look at the following steps, if you are still having troubles.
Troubleshooting wireless network and Internet (Windows 8)
Also, you can look at the power management for your wireless adapter:
Disable the Power Off option for the adapter:
1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)
2. Expand the Network adapters.
3. Right click on the Ethernet/Wireless Adapter and click Properties.
4. Click the Power Management tab.
5. Remove the check mark beside Allow the computer to turn off this device to save power.
6. Click OK.
7. Test.
Forget the network: (Windows 8)
1. Press Windows Key + C
2. Click Settings.
3. Click Change PC settings.
4. Click Network on the left.
5. Click Manage known networks.
6. Click the network name.
7. Click Forget.
Reset the TCP/IP settings on your PC:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
4. Restart your PC and test.
It may also help to reset the winsock catalogue:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
4. Restart your PC and test.
Reinstall the network adapter drivers:
1. Download the drivers from here but do not run them yet.
2. Go to your start screen/menu and type Device Manager.
3. Expand Network adapters.
4. Right click on the wireless adapter and choose Uninstall.
5. Run the downloaded drivers from step 1.
6. Restart your PC and test.
Test an ethernet connection:
Self explanatory. Test if the issue persists on a wired connection to rule out the wireless adapter hardware so troubleshooting can be directed towards the right areas.
Test another connection:
Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

No light on e print and not working

Hi I have a hp desk jet 3050a which is approx 2 month old. The e print was working but now the light has gone out on the printer and nothing I seem to do gets it working again. I have tried turning it on and off and the same wih the router. Any suggestions please?

If you have Apple Care or your computer is still under warranty, give them a call and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.

My 4s camera flash light wont turn off and camera is not working

my 4s camera flash light wont turn off and camera is not working

Hello there, Shantae2231.
You may just want to try resetting your phone per the instructions in this Knowledge Base article (There is no data loss by performing this step):
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all. Help

I just updated my Apple TV 2 and now it is flashing and not working at all. Help

I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu. Per Winston's suggestion, I logged out of iTunes and then tried to log back in. I am getting a message "the server is not responding- please try again later".
FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
Sounds like the update has overwhelmed the Apple servers.
Dave

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!

There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

In Flex application functionality is working sometimes and not working sometimes..

Hi,
Please help me on this..
In my flex application some functionality is working some times and not working sometimes..
In my project i have 5 sections with 5 separate screens..Each screen is of one diffeent module.
After logining into the application:
I will go to one screen..First time every functionality is working in that screen..
Ex:: I have a screen with datagrid.From that user will select one job name from datagrid click on next button..
Based the job name the user selected i have to display some information in next screen and customer names.customer names is a combo box..
below is the code:::
 public function populateAllOEMCustomers(event:ResultEvent):void
 1) var object_CustomerList:CustomerList = event.result as CustomerList; //Assigining result object values to Object reference variable.
 2) var allOEMCustomersCollection:ArrayCollection = new ArrayCollection(); //Declaration ArrayColliction referance variable.
 3) var i:int=0;
 4) var customerComboLabel:Label = new Label();
 5) for (i = 0;i < object_CustomerList.arryCollCustName.length; i++)
 var strCustName:String = object_CustomerList.arryCollCustName.getItemAt(i).toString();
 var strCustId:String = object_CustomerList.arryCollCustId.getItemAt(i).toString();
 customerComboLabel = new Label(); //Dynamic declaration of label.
 customerComboLabel.name = strCustName; //Assinging the customer name to the Label name field.
 customerComboLabel.text = strCustId; //Assingning the customer id to the Label text field.
 allOEMCustomersCollection.addItem(customerComboLabel); //Adding Lable into the ArrayCollection referace variable.
 //customerComboID.selectedItem = "--";
 OEMCustomersComboID.dataProvider = allOEMCustomersCollection;
 OEMCustomersComboID.selectedItem = -1;
This functionality is working fine when i visit to this screen first time..If you go back to another screen and come back to this same screen and click on next button this time customer names combo box has no customer details..I am getting Nullpointer Exception and it is showing the line number 5( i have given the number for code given above..)
If i change the first line of the code to below code:: every time the above functionality is working fine.Not getting any error msg..
var object_CustomerList:Object= event.result ;
If i type cast it to specific class(CustomerList) ,functionality is not working ..getting null pointer exception..If i type cast it to Object everything is working fine..In my code wherever i have typecasted it to specific class functionality is not working(gettingNullpointerExcepion).
Please help me on this..I am not getting what could be the reason..
I am using::Flex 3,Flash player 10.1
Thanks in advance..
Regards,
Satya

Hi Satya,
This sometimes as in your case might not work as the way you have specified the RemoteClass attribute in your AS class. As somtimes there may be a case as before it is mapped to a server side you are returned the data and so that you may not get the data as your Custom class but as normal Object type.
So in order to avoid this you can map the server side class to AS classes in the PreInitialize handler itself as shown below:
Specify the preinitializeHandler in your main application and write the below function.This way also you can map AS classes with the server side. So that you will not have any problem referring your application as AS class types.
You can use the same line for registering all the classes. By using this you can remove all the [RemoteClass] attributes on all AS classes and include it at single place.
preinitialize="onPreinitialize()"
private function onPreinitialize():void
registerClassAlias("com.expeditor.ScriptAdmin.Objects.CustomerList", CustomerList);
Here in the above line of code the string in quotes refer to the namespace of the Server side class and the latter is your AS class. Also dont forget to import the namespace of the corresponding AS class in the file.
Try this and let me know..
Thanks,
Bhasker

My two month old iphone lightning cable is corroded and not working. Any solutions to this apparently common problem on the horizon?

My two month old iPhone lightning cable is suddenly corroded and not working. Any solutions to this apparently common problem on the horizon?

You bought a used iPhone. Amazon is not an authorized supplier of iPhones, nor are any of the 3rd parties that sell iPhones there.
You can make an appointment at the genius bar and have it looked at.
If you are very very lucky, it is still under warranty and it wasn't opened or otherwise tampered with before you bought it. In which case, Apple will replace it under warranty.
If it's not under warranty, they will replace it for $199.
If it has been opened or tampered with, they won't touch it.

Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

1. System Preferences > Flash Player > Advanced > Delete All
     Press the "Delete All" button.
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   The next step is important.
   Click Safari in the menubar and select “Quit Safari”.
   If it doesn’t quit, Force Quit it.
   Press command + option + esc keys together at the same time. Wait.
   When Force Quit window appears, select the application if not already.
   Press Force Quit button at the bottom of the window. Wait.
   Application will quit.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

Minus and - not working in query

Hi all,
I am operating on 10G R/2.
I have thsi query where thi sstatement <pre>(COUNT(W_O) - COUNT(W_I))</pre> TOTAL is returning 0.Why is the minus and '-' not working out in this query?.
<Pre>
SELECT
TRUNC(DT) week_start ,
next_day (TRUNC( DT) - 7, 'Sunday' ) + 6 week_end ,
to_number(to_char(DT,'FMWW'))wk_no ,
'I_'||W_I AS IO ,
COUNT(W_I) TOTAL
FROM TABLE_A
WHERE W_I IS NOT NULL
GROUP BY TRUNC(DT),
next_day (TRUNC( DT) - 7, 'Sunday' ) + 6,
to_number(to_char(DT,'FMWW')),
'I_'||W_I
UNION ALL
SELECT
TRUNC(DT) week_start ,
next_day (TRUNC( DT) - 7, 'Saturday' ) + 6 week_end ,
to_number(to_char(DT,'FMWW'))wk_no ,
'O_'||W_O AS IO,
(COUNT(W_O) - COUNT(W_I)) TOTAL
FROM TABLE_A
WHERE W_O IS NOT NULL
GROUP BY
TRUNC(DT),
to_number(to_char(DT,'FMWW')), 'O_'||W_O
</pre>
Edited by: CrackerJack on Jun 14, 2011 8:06 PM

basic maths
SQL> select count(object_name), count(owner), count(object_name) - count(owner)
2 from all_objects;
COUNT(OBJECT_NAME) COUNT(OWNER) COUNT(OBJECT_NAME)-COUNT(OWNER)
52658 52658 0
1 row selected.if you take away a number from itself you will get zero. I think you may mean SUM() rather than COUNT()

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

Where can i exchange my not working iphone bought in Switzerland (on july 12, 2012.) that just turned off and not working since. In croatian store they don't want to give me replacement phone!!!!

I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support

“the EU is considered one country for warranty purposes“
Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
Some how you need to get your phone back to Switzerland.

I have a problem in this that i want to paas a form in a case that when user pres n then it must go to a form but error arises and not working good and threading is not responding

made in cosmos help please need it
using System;
using Cosmos.Compiler.Builder;
using System.Threading;
using System.Windows.Forms;
namespace IUOS
 class Program
 #region Cosmos Builder logic
 // Most users wont touch this. This will call the Cosmos Build tool
 [STAThread]
 static void Main(string[] args)
 BuildUI.Run();
 #endregion
 // Main entry point of the kernel
 public static void Init()
 var xBoot = new Cosmos.Sys.Boot();
 xBoot.Execute();
 Console.ForegroundColor = ConsoleColor.DarkBlue;
 a:
 Console.WriteLine("------------------------------");
 Console.WriteLine("WELCOME TO THE NEWLY OS MADE BY THE STUDENTS OF IQRA UNIVERSITY!");
 Console.WriteLine("------------------------------");
 Console.WriteLine();
 Console.WriteLine();
 Console.WriteLine();
 Console.WriteLine("\t _____
 Console.WriteLine("\t| | | |
| | |");
 Console.WriteLine("\t| | | |
| | |");
 Console.WriteLine("\t| | | |
| | |");
 Console.WriteLine("\t| | | |
| | |___________");
 Console.WriteLine("\t| | | |
| | |");
 Console.WriteLine("\t| | | |
| | |");
 Console.WriteLine("\t| | | |
| | |");
 Console.WriteLine("\t| | | |
| | |");
 Console.WriteLine("\t| | | |
| | |");
 Console.WriteLine("\t|_____| |____________| |____________| ____________");
 string input;
 Console.WriteLine();
 Console.Write("\nAbout OS : a");
 Console.Write("\nTo Shutdown : s");
 Console.Write("\nTo Reboot : r");
 Console.Write("\nStart Windows Normaly : n");
 Console.WriteLine();
 input = Console.ReadLine();
 if (input == "s" || input == "S"){
 Cosmos.Sys.Deboot.ShutDown();
 else
 if (input == "r" || input == "R"){
 Cosmos.Sys.Deboot.Reboot();
 else
 if (input == "a" || input == "A"){
 Console.ForegroundColor = ConsoleColor.DarkBlue;
 Console.Clear();
 Console.WriteLine("\n\n\n-------------------------------------");
 Console.WriteLine("version: DISPLAYS OS VERSION");
 Console.WriteLine("about: DISPLAYS INFO ABOUT ANGRY OS");
 Console.WriteLine("hello or hi: DISPLAYS A HELLO WORLD");
 Console.WriteLine("MESSAGE THAT WAS USED TO TEST THIS OS!!");
 Console.WriteLine("-----------------------------------");
 Console.Write("You Want to know : ");
 input = Console.ReadLine();
 if (input == "version"){
 Console.WriteLine("--------------------");
 Console.WriteLine("OS VERSION 0.1");
 Console.WriteLine("--------------------");
 else
 if (input == "about"){
 Console.WriteLine("--------------------------------------------");
 Console.WriteLine("OS IS DEVELOPED BY Qazi Jalil-ur-Rahman & Syed Akber Abbas Jafri");
 Console.WriteLine("--------------------------------------------");
 Console.Write("Want to go back to the main window");
 Console.Write("\nYes : ");
 string ans = Console.ReadLine();
 if (ans == "y" || ans == "Y")
 goto a;
 Thread.Sleep(10000);
 else
 if (input == "n" || input == "N")
 Thread.Sleep(5000);
 Console.Clear();
 for (int i = 0; i <= 0; i++){
 Console.Write("\n\n\n\n\t\t\t\t\t ____ ____ ___
 Console.Write("\n\t\t|\t\t | | | |
| | | | | |");
 Console.Write("\n\t\t|\t| | |---- | |
| | | | | |---");
 Console.Write("\n\t\t|____|____| |____ |___ |____ |___| | | |___");
 Thread.Sleep(500);
 Thread.Sleep(5000);
 Console.Clear();
 BootUserInterface();
 Console.ReadLine();
// Form1 fo = new Form1();
 else{
 for (int i = 0; i <= 5; i++){
 Console.Beep();
 Thread.Sleep(1000);
 goto a;
 while (true);
 private static void BootUserInterface() {
 Thread t = new Thread(UserInterfaceThread);
 t.IsBackground = true;
 t.SetApartmentState(ApartmentState.STA);
 t.Start();
 private static void UserInterfaceThread(object arg) {
 Form1 frm = new Form1(); // use your own
 Application.Run(frm);

Hi
Jalil Cracker,
>>when user pres n then it must go to a form but error arises and not working good and threading is not respondin
Could you post the error information? And which line caused this error？
If you want to show Form1, you can use form.show() method
Form1 frm = new Form1();
frm.Show();
In addition, Cosmos is an acronym for C# Open Source Managed Operating System. This is not Microsoft product.If the issue is related to Cosmos, it would be out of our support. Thanks for your understanding. And you need raise an issue at Cosmos site.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT4623 I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution

I was installing the ios 6 on my iphone 3GS and an error occured and since then it's hanged up and not working. Please suggest some solution

the same thing here! each time its suppose to register with my network, it cant. im wondering if its a hardware problem

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0

My ipad 2 died. It is not charging and not working. Help?

My ipad 2 has suddenly died. It is not charging and not working. It is under the one year warranty. Does anybody have experienced such problem?

If you are stuck with the Apple logo then the last section on this page http://support.apple.com/kb/TS3281 suggests putting the iPad into recovery mode http://support.apple.com/kb/HT4097 (which so far I havn't need to do with mine)

Flashing light in Wrotham supply. And not working wi-fi..

Similar Messages

Maybe you are looking for