Flashing question mark, but not drive's fault!

So I got the flashing question mark the other night....went to internet recovery, and it does not see the drive at all. I can't reinstall lion, and I can't repair the disk. When selecting 'startup' disk from the apple menu, there is no disk to select. This a sata II samsung 840 SSD in an early 2011 macbook pro 17".
I decided not to erase the disk, rather throw it into an enclosure to see if it shows up. Sure enough, it does, and everything is intact. So my question is, what has gone on my macbook that isn't allowing it to see the startup drive?

Thanks. Just saw this on youtube as well. Ebay it is and we shall see.

Similar Messages

My MB pro doesn't recognize any start up discs. I have the flashing question mark, but when I press option/alt, I'm only prompted to start the internet recovery. Afterwards the Mac OS X Utilities pops up, but there's no start up disc?

I have the flashing question mark, but when I press option/alt, I'm only prompted to start the internet recovery. Afterwards the Mac OS X Utilities pops up, but there's no start up disc when I try to reinstall Mac OS x or anything.

Hello, sullivja.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing this issue.
A flashing question mark appears when you start your Mac
http://support.apple.com/kb/ts1440
Cheers,
Jason H.

Flashing Question mark: New hard drive not working Macbook Pro late 2008

After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
Heres the device.
http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
I put the old drive back in and it works fine.
I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
Appreciate your help
Gary

Sorry I think you may be confused.
I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
I replace the macbook pro hard drive with the seagate drive:
http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
Does anyone know what the problem could be as the hard drive is brand new.
Appreciate your help
Thanks, Gary

IMac DV SE 400 chimes, gives flashing question mark. Hard drive bad?

My G3 iMac DV SE 400 will not start up. This is what happens:
1. Startup chime
2. Hard drive starts to spin
3. Hard drive "clicks" once
4. Flashing question mark on screen
I tried resetting the PRAM and disconnecting everything like it says in the manual. I have booted up from CD and used Disk Utility (OS X) and Disk First Aid (OS 9) to find out if the computer "sees" the hard drive. No luck with either one - the drive does not mount. I have also tried System Profiler and the computer does not recognize the presence of any hard drive there either.
Is the hard drive really "dead?" Can it be resurrected - at least to the point where I can retrieve my files, pictures, etc.? I'm confident that the drive is receiving power because it actually starts to spin up (see #2 above). Am I overlooking something easy here? Could it be as simple as replacing the battery? I haven't tried that because the hard drive does "attempt" to start up.
Failing all else, is it possible to retrieve the data using my other Mac even though the hard drive will not boot?
Any help would be appreciated. Thanks.

Well if it spins up you might be able to salvage your data with Data Rescue II (free demo) or Disk Warrior. You could also try Target mode but if disk utility didn't see it then that's probably not going to be any better.
If those two don't see it then your only option is data retrieval via a pro company but that will be very expensive.
Richard

Flashing question mark/will not read disc.

So, I've seen other discussions here and tried to apply them to my own problem, but nothing seems to work so far. If anyone can offer any help, this would be great.
I was updating routine software and it asked if I wanted to restart now. I chose yes and it shut down, restarted to the flashing question mark. I tried restarting by holding down the power and c key many times. I know I need to install Mac OS X Install Disc 1, but my Macbook is not reading the disc. I tried putting in disc 2 as well but it doesn't recognise this one either.
Thanks.

Hi,
Hold the option key on startup. If a boot manager doesn't appear there may be hardware issues.
If a boot manager appears but you can't see a CD icon there may be a problem with your optical drive (or media).
Good Luck!

On power startup my Imac shows a white screen then subsequently a flashing question mark-- will not open

My iMac shows only a white screen and then a flashing question mark on power start up and will no open display

Help here > A flashing question mark appears when you start your Mac

My Mac Apple Pro laptop is getting old - anyway, when I turn it on now, the screen just lights up white - and nothing is happening. A few days ago, I had a screen with a flashing question mark, but now just blank white. what to do/how to fix it?

My Mac pro notebook laptop - when i turn it on, it's just a lit up white screen - and nothing else is happening - it's just frozen. how do i fix it?

You may try the procedures in this support article. I suspect a trip to the Apple genius bar will be the best option. You probably have some hardware issues, such as the display or the GPU and the technicians will be to make to make a definitive determination.
http://support.apple.com/kb/ts2570
Ciao.

Help diagnos. flashing question mark on monitor, cannot boot from CD drive

Any ideas? This is an older G3 tower which was "souped Up" wtih USB and Firewire cards, memory
Mac froze in midst of work last week. Now only get flashing question mark supermimposed on image of a floppy drive.
Tried to re install system (OS9) but cannot get ANY CD to boot from CD drive. I reboot, hold down "C" Key with CD in tray ( and i can hear the CD drive working). But the tray opens and ejects/rejects the CD).
I now suspect the problem is NOT the OS but rather a hardware issue.
Am I correct in this assumption? what else could this be?
I am trying to help an older gentleman who has no backups and has some important documents on the HD.If I can boot up, might be able to retrieve those itesm. (and get a newer Mac!)

Not the answer,Dale (thanks anyway)
I read that article.
I cannot boot from any bootable CD.
Inserted the OS install disk as well as third party bootable CD.
with CD in the CD drive tray, I restarted and held down the C key.
Mac restarted but the CD tray popped open. Would not boot from the CD.
That is why I posted query
not only do we have the flashing question mark but bootable CDs are not booting this Mac. So I can do no diagnostics, no repair, not salvage of files.
I am trying to understand where the problem lies. am guessing Hard Drive failure but why should CD also not work?

Flashing question mark folder OS X 10.6.8. Issue is not the drive itself.

Received flashing question mark folder on a MBP5,5 running 10.6.8. Removed the drive and was able to boot on same machine with the drive plugged in as external USB. Any idea as to what the issue may be? It's not the drive itself. Bad connector? Going to update the drive to mountain lion this weekend to see if that resolves anything.

Actually, it is the drive in some way.
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

Flashing question mark, trying to reinstall Tiger but no volume found to install it too.

I was installing updates to this mid 2004 iBook I bought and upon restart I just got tr flashing question mark folder. I tired booting from the OS disc to install, but it tells me there is no volume to install the software too. WTh? It was just working fine 20 minutes ago. It sounds like the HHD engaged but the computer isnt seeing it. Is the hard drive gone or what?

Hello, it sounds like the hard drive has gone to me, the question mark icon you described would be Mac OS X not finding a volume to boot from. It does suggest a replacement hard drive is required, however I have G4 14" iBook that has a problem with a chip on the logic board. A common problem now with old used iBooks. The chip solder becomes departed from the board and eventually effects the iBook's ability to read the hard drive. I am not suggesting this is your fault here, but it's worth being aware of. I personally would replace the hard drive fist and with all luck it will resolve your problem.
Good Luck

My Late 2013 iMac with Yosemite 10.10.2 randomly shuts down and displays a grey screen with a flashing question mark folder. According to Disk Utility, my drive is OK. What should I do?

I've had this problem for a while and I thought it went away. I've looked at all of the other discussions and tried what they suggest, nothing. I preferably don't want to erase everything on here. Is there a way to fix it without having to do that? I also noticed that other people have the screen when they first boot their computer. Mine are in the middle of a college essay or browsing online. I would really like to fix this issue. I haven't even had my iMac for a year yet. Any suggestions?

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

MacBook Pro 13 2010 running Mountain Lion: will not boot and shows a folder with a flashing question mark. Will not start in 'safe mode' i.e holding shift on start up - nor can I call up any utilities with the OSX shortcuts. Any thoughts?

Following an automatic update, the machine wouldn't boot. Screen came on (shows white) - then either showed a 'No-Entry' Sign and a spinning cog, or a folder with a qusetion mark. I tried to start the machine in different modes ( eg. holding shift after the tone ) but nothing worked. after leaving the machine alone for 1 hour. It worked perfectly again. I did a 'verify disk' check which found no problems. 2 hours later it then froze ( In - Photoshop). Could not force quit, so shut down, and have not been able to boot again since (white lit screen - flashing folder with question mark) . I have also taken the hard drive out and checked the connections which seem fine. Any suggestions? - Is the Hard Drive dead. : other info : It was also running parallels 8, with Windows 7. at the time of the update....

This article may help: A flashing question mark appears when you start your Mac.

Macbook pro flashing question mark folder, won't recognize hard drive

My 2010 macbook pro froze and after restarting I was greeted with a flashing question mark folder. I then restarted again and held down "option" key and went into Mac OS X utilities then into disk utilities. In disk utilities, my only drive options are "superdrive" "disk0" and a subfolder of "disk0" labeled "Mac OS x Base system". My hard drive is no where to be seen. I also tried to install a new hard drive but the same thing happened, the computer could not recognize that there was a hard drive present. What can I do to fix this??

Hi bigdubee,
The exact same thing happened to my 2010 MacBook Pro today. Restarting with the "option" key held down, I get only 2 of the 3 options you listed in disk utilities ("disk0" and a subfolder of "disk0" labeled "Mac OS x Base system".
Did you take your Macbook Pro to the Apple store? And were they able to fix it?

Installed new hard drive and flashing question mark appears

I bought a new hard drive for my macbook pro (mid 2009) because my original harddrive bit the dust... I purchased it off of amazon which states that its specifically for macbooks and the reviews appeared to back it up. I saw a lot of people with great reviews of the same model of macbook that I have so I figured it was the best solution.. I connected the new hard drive but I am getting the dreaded flashing folder/question mark. Is this normal before re-installing the OS x? Heres the problem, I am out of town on business and do not have the original OSx disc on hand. So my question is, is the flashing question mark normal upon installing a new harddrive? and if so, is there away to install the OSx onto the new harddrive without the disc?
my macbook was running mavericks before the harddrive went to poo, however I did try to re-install mavericks before i ultimately realized that I needed to new harddrive. I noticed that rebooting my mac with command+r would give me the option to reinstall mavericks without a disc or anything. the next question I have is, would this still be do-able on the new harddrive? I tried the command+R option on the new harddrive but nothing happens.
Can someone help me out here, I am getting a little desperate as I have gone over a week without my mac and theres so crucial things I need to get done! Luckily I have all my stuff backed up on an external hard drive, I just need to get the mac running again. Thanks for taking time to read!

1. Yes, it is normal. If there's no OS on the drive, there's nothing to take the computer past that point.
2. No, there's no way on that Mac model. You need to use an existing system(see #4).
3. Not on that Mac model; it doesn't have the Internet Recovery system, and there isn't a recovery partition on the new drive.
4. If the backup drive contains a bootable clone of any compatible OS, or a Time Machine backup created from Mac OS X 10.8 or newer, connect it and restart the computer with the Option key held down. If it doesn't contain either, you can't.
(105476)

Flashing question mark, but not drive's fault!

Similar Messages

Maybe you are looking for