Flashing Question Mark Icon on Start up. DEAD iMAC. HELP

Well, i think i've hit a break wall...
It wont even recognize my internal HDD, it just has a flashing question mark (?) icon when i start the machine.....i've used Tech Tool Pro 4 and the Leopard start up disk, both with no luck, they don't even think a HDD is present at all.
I have pics of what i'm looking at:
http://img695.imageshack.us/img695/9631/26052010014.jpg
http://img9.imageshack.us/img9/3278/26052010021.jpg
http://img684.imageshack.us/img684/6130/26052010019.jpg
http://img217.imageshack.us/img217/3041/26052010018.jpg
http://img535.imageshack.us/img535/4143/26052010016.jpg
its one dead HDD..... any clues on what to do next?
Message was edited by: Matt-Beasley

You must use the original grey system DVD disc that came with your iMac to run the Apple Hardware Test, the one that is marked with instructions for running the test on it. Depending on the version of OS X that shipped with your iMac, this could be either disc 1 or disc 2.
When you restart with this disc in the optical drive & the D key held down, you should not see a question mark icon or the leopard installer. If you do, it means that either you don't have the correct disc inserted, you waited too long to depress the D key, or you are releasing it too soon.
You don't say exactly which Core 2 Duo iMac model you have. If it is a Mid 2007 or later model, use the chart at Apple Hardware Test: iMac (Mid 2007) and later models to identify the AHT version you need. That version number should printed on the grey disc you need to use. You can't use the instructions there to start the test from the hidden HD partition if the HD is dead or damaged but the ones for running the test from the Install DVD should work fine.

Similar Messages

  • TS1440 Flashing question mark when I start the MacBook

    Hello!, I have a MacBook Pro  but there was a flashing question mark when I start the MacBook, it does not go away, I have read the tips on you all site, but I can't find anything, it is for the Mac, not for a MacBook. Can anyone help me please?? Thanks!

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

    Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

    It looks like ocz is aware of the issue and trying to address it via firmware:
    http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
    It's a shame because apple is clearly the party that changed something.

  • Flashing Folder/ Question Mark Icon at start up

    I am new to the Mac world, so I am having some difficulty troubleshooting. I don't know what this means. When I boot up, I get past the first screen and it is just about to go into the login page, then it flashes and goes to the screen discribed in the subject line. What does that mean and how do i fix it??

    Hello there and welcome to the forums.
    That flashing question mark means that Mac OS X is having trouble booting up from the HD from either missing or corrupt system files.
    The steps recommended to fix this problem is detailed here: Link: [http://docs.info.apple.com/article.html?artnum=58042]
    I hope everything turns out fine.

  • Flashing Question Mark Folder on Start-up

    I recently starting having administration issues with my Mac Mini.
    I went to update to OS 10.5.7 and when the administrator box came up asking for my password, my name was missing. After putting in the correct information, was unable to update, but received the message what my clue to password was.
    Anyway, I performed a safe startup, changed the password and tried again. Same issue as before. So I started up from the Start Up Disk, and ran Disk Utilities and verified the disk and repaired any permission issues. When I started up my Mac Mini from the hard drive, I still did not have my administrator password working.
    At this point, the start-up ping is gone.
    I reset the Pram and had the same issue. So, I saved all important files to an external hard drive and tried to do a clean install. I was unable to do the clean install.
    I removed the hard drive from my Mac Mini and installed it into a friends Mac Mini. I had complete control of my computer with no administrator password issues, the ping was there, and I could reload all saved items and still not have any issue no matter how I started up the computer. I then performed a complete erase and reinstall and still had no problems.
    I reinstalled the hard drive into my Mac Mini, and I now have the Flashing Question Mark Folder with gray screen on start-up and no ping. Can't fire wire to start up, can't clone, can't start-up from disk, safe mode, etc..
    Any ideas would be helpful. Most likely I will be going to the Apple Store and seeing what they can do.

    generally, the flashing folder mark means it can not find the startup drive.
    if you hear those kind of noises your hard drive is most likely dead. while this is almost certainly true you can try booting from the install DVD and see if the drive is visible in disk utility. if you can't insert the DVD try this. reboot and hold option at the chime. this should boot you into startup drive manager. there you should be able to insert the DVd and choose it as the startup drive. boot from the DVd and once past the language screen start disk utility from the Utilities menu at the top. see if it detects the internal drive. if it does, try repairing it. if it doesn't the drive is dead.

  • Flashing Question Mark Icon

    Hi All,
    My iMac will not start up. I am getting a flashing question mark folder icon.
    What should I try?
    imac G5 20; 1gig RAM; 160HD; airport; bluetooth keyboard & mouse; bose companion 3 speakers   Mac OS X (10.4.8)  

    If you can get hold of TechTool or Disk Warrior thay can run diagnostics - have you checked the status of your SMART at the bottom of the Disk Utility window? It should say Verified, if not, your drive is indeed failing.
    Disk Utility can't 'see' the hard drive so I can't run a repair. Nor can the install programme. It only shows the Tiger Install DVD (and a Network install, in the case of the install). I have tried lots of time booting up with the 'C' key held down, but the same happens. I thought my wireless keyboard might be the problem as a screen comes up to prompt me to replace the batteries in the mouse, but they are fine. I tried again with a wired keyboard, but still no luck. I have replaced the batteries in the keyboard too. I will try again with another keyboard.
    Any thoughts?
    imac G5 20; 1gig RAM; 160HD; airport; bluetooth keyboard & mouse; bose companion 3 speakers   Mac OS X (10.4.8)  

  • Flashing question mark, keeps forgetting start up disc

    The first time I got the flashing question mark I zapped the pram and it worked for a while. Then got stuck on whirling disc when waking up. I shut it down and it forgot the start up disc again. Zapping pram didn't work this time so I resent PMU and it started. I've been trying to back up ibook data before I take it in to see what's up. My hard drive is very noisy and I suspect it's about to go. Is it possible that the whold problem is the hard drive? It's logic board had been replaced some time ago. Screen is bright and when it works everything works well, just noisy hard drive. And, how many times can you zap the pram or reset pmu before real damage is done?
    Thanks folks,
    Connie

    Connie, is this an iBook or an eMac? (You've posted in the iBook G3 Forum.)
    Whichever, as long as it is running OS X 10.2 or better, I would suggest that you try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
    You will see your normal desktop. Once completely started up in Safe Mode, restart normally into OS X (hold down the x key as the startup chime is ending), and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and, if you are running OS X 10.3 or later, note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    Check to make sure that your OS X installation is selected as your startup disk, and see if it is remembered now.
    Maybe a little hard drive maintenance will help things out.

  • Flashing question mark folder at start, broken CD drive, warranty Q's.

    Hello! Thanks for reading.
    Okay, so here's the background: I was just chilling around the house yesterday with my macbook, and it freezes, with no response from the touchpad or keyboard. I figure no problem, and just turn it off and on again. And then thats when I got the flashing question mark folder.
    So I hopped on my family's PC to do some research, hoping to be able to fix it myself. Turns out the best way to fix it is to pop in the disk that came with the computer during start up... which I can't do because my disk drive is broken. I also tried other things, like pressing various keys (ctrl + option + p + r, or something like that)... and that didn't work.
    The disk drive broke when I was at school, and as it was finals week, I had no time to get my computer to a genius bar. Then I moved quite a distance (see below), a process which has taken up most of my summer and made me quite busy to the point it has taken my macbook pretty much dying on me to get it to a genius bar. Gah.
    So I guess I have a lot of questions now.
    My computer is JUST a year old, by give or take a week or two.
    I bought my computer from an authorized U.S. reseller in Japan while I was living there (I live in the US now, which I definitely wasn't expecting a year ago)... and no contact from apple came to buy apple care. Is it possible that because of the circumstance under which I bought my computer, that apple may still cover any repair or replacement fees under the warranty?
    Also, I made an appointment at the local genius bar. Will that be free?
    Also, does anybody have any other suggestions about how to get my computer up and running away from the **** that is the question mark folder?
    Much thanks! I appreciate your time.

    You made 2 big mistakes. 1) Apple may or may not contact you about AppleCare (sometimes I've gotten a postcard or email and other times I've not) but it is up to you to buy it before the 1 year mark. 2) whether it was convenient to get the computer repaired at the time or not, you should have contacted Apple to get the issue in the computer. If you didn't, Apple has no reason to believe it happened after the warranty ended.
    You are going to foot the bill for the repairs

  • Flashing question mark folder when start iMac after Time Capsule performed a new back up

    I switched my iMac on after a few days away and I was asked to start a new back up for Time Capsule to enhance the performance of the device (or something along those lines). Clicked the back up now and carried on, having read the process could take a few hours (not surprising because of the amount of data on my computer).
    Left it running overnight and when I came back this morning the computer was off.  Switched it on, saw the apple logo and the progress bar but it didn't move past 25% before I had a message in several languages to turn the computer off (and some script in the top left corner.  From memory I think I saw <panic> in that script but not 100% sure).
    When I switched it back on I had the dreadful flashing question mark so performed steps described in support.apple.com/kb/ts1440 several times and performed a safe Boot.  No results.
    I haven't reinstalled Mac OS X (step 11 in ts1440) as I don't want to erase the hard drive.
    I have plugged the Time Capsule in a MacBook and it seems empty bar 2 very small files so I'm now very worried.  I have some questions:
    1- I'm not a technical person so is this now a case of bringing the iMac and Time Capsule to an Apple shop or call Apple support when they reopen tomorrow Monday?
    2 - Is my data wiped out in the iMac and Time Capsule? If yes is it recoverable - obviously not by me but by an expert?
    3 - what created the problem?  My Lightroom 3 catalog was corrupted 3-4 times over the last few weeks and was surprised that Time Capsule wanted to perform a new back up but everything otherwise was working fine.
    I'm very much looking forward to your help and suggestions.

    You have a couple of options and I also have a suggestion for the future. First is you can try Data Rescue software. You can find it at:
    http://www.prosofteng.com/products/data_rescue.php
    The other is sending the HD out to a professional data recovery service.
    My suggestion though is using a redundant backup system. Many on this forum do just that because a backup (as you have found out) can fail too. What I use is TM and on a separate EHD I created a bootable clone using SuperDuper. You can use SuperDuper or Carbon Copy Cloner for this. I'd recommend reading the following MacWorld articles for backup strategies. I think you'll see a recurring them in them and that is redundancy is wise.
    Backup Plan
    Backup Plan II
    Backup Plan III
    Also it wasn't a virus, you are correct there are none for OS X.
    Good luck on the recovery.

  • Mac Pro wont book, getting folder with flashing question mark icon

    I opened up Disk Utility but it only shows one of my two hard drives. I'm guessing it's toast. But before I go buy a new one, is there any value in going into an apple store and see what they can do?

    I have the same problem with my brand new Mac Pro. from the start, upon bootup, i see a flashing folder with a question mark. I've already sent this Mac back for service. I believe the problem may have something to do with the airport card i had installed. something about the OS trying to find the wireless network...i'm not savy at this, by any means and hope we both resolve this issue. Do you an airport card installed?
    I guess I'll be calling tech support again.
    j

  • Flashing question mark folder on start up, macbook pro. plz help

    Hey folks,
    I know there are threads on this but since I am using my blackberry to write this message I am unable to search the forum.
    Ok. So that's what my macbook pro is doing and its also not letting insert a cd or dvd in the superdrive, seems like it just jammed up. However when I press T on the start up it brings me into a firewire mode? How can I fix my start up issue?
    Secondly I hear the left side of my macbook pro (I think that's where the hard drive is) while the computer starts up I hear it sipping and the noise it makes is like a scratching noise.
    And finaly no idea as to why its over heating?
    Plz help.
    -Joey

    generally, the flashing folder mark means it can not find the startup drive.
    if you hear those kind of noises your hard drive is most likely dead. while this is almost certainly true you can try booting from the install DVD and see if the drive is visible in disk utility. if you can't insert the DVD try this. reboot and hold option at the chime. this should boot you into startup drive manager. there you should be able to insert the DVd and choose it as the startup drive. boot from the DVd and once past the language screen start disk utility from the Utilities menu at the top. see if it detects the internal drive. if it does, try repairing it. if it doesn't the drive is dead.

  • What does a flashing question mark icon mean, alternating with the finder icon, at startup?

    When I power up a small folder appears against a grey screen.  Insode the folder are alternating question mark and finder icon.

    It means that your iMac cannot find an operating system to boot from.
    What version of OS X are you running?

  • Flashing question mark folder at start up

    My boyfriends Imac has not been running for months now and his birthday is coming up so I want to get it fixed. Before it quit turning on there was a weird clicking noise coming from the fan like a click click click vrrrroooommm.. and it would happen over and over and make all of the applications run slow. Then it turned into starting the computer to a blank screen and a flashing folder with an envelope. We think it is a failed hard drive from reading the message boards and the warranty has expired. Do I still have to get a diagnostic from the store or can I say the hard drive has failed and buy a new one and get the apple store to replace it? Do you think it will be expensive?

    Welcome to Discussions - getting a diagnosis from a Genius at the Apple store is free, and I would suggest doing that before investing in a hard drive. Once you know what the problem is (and it could well be a failed power supply), you can decide whether it is economic to fix it, or perhaps invest in a new machine. Apple will be happy to replace the drive for you, however, you can get good drives much more cheaply at a place like [macsales.com] and then ask a local Apple reseller to install it for you.

  • Blinking folder with question mark icon upon start up? Disk or SATA?

    Long story short, disk utility is unable to repair the "Macintosh HD" disk. Re-installing mountain lion is not an option due to the computer's inability to detect the HDD disk. How do I differentiate between a corrupted (dead) hard drive or a broken SATA cable (in which acts as a medium)?
    Note: my intentions are to fix the issue instead of resorting to apple care.
    Thanks in advance

    If you have a  known functioning boot drive, you can substitute that for the internal HDD.
    You can try to use your current drive externally.  Use Startup Manager and if the external HDD appears, select it.  If it boots the MBP, then that is an indication that the SATA cable is faulty.
    http://support.apple.com/kb/ht1310
    Ciao.

  • Computer frooze - now flashing question mark folder on start up

    Help...what is my next step. Tried to look through threads for quick answer. All my manuals are in another place! J

    DavidOC suggested to start from the original DVD. What might be a thought is for you to repair permissions / disk from there. You need to go past "Use English as install language". The, from the simplified finder bar, choose "utilities/disk utility".
    If it comes back with a descriptor for your harddrive disk (HDD) rather than the name you gave it when OSX was running ok, then you may have a corrupted disk in need of repair. If disk utility "cannot mount" the damaged drive, and you haven't got techtool or diskwarrior, then you might have to reinstall your OS from scratch, I am afraid. If, e.g. the +volume header+ is bad, then the HDD in its existing format cannot be read. Hopefully, you can repair it with disk utility / repair disk permissions.

Maybe you are looking for