Flashing red border! (She can't hold it much longer, Captain!)

I did a very simple change to some code in my program and when I tried to run it, it got to the case structure where I did my little change and suddenly the border of that case started flashing red and blue.
Obviously this means something is wrong, but what? I'm a newbie and I've never seen this before. How can I pinpoint where my problem is? I put it into debug mode and I don't see where it's getting hung up. My code is obviously okay or I wouldn't be able to even start it.
Amateur programmer for over 10 years!

spaceman spif wrote:
I looked into the "breakpoint" tool and it looks like it's pretty handy. Based on your guys' experience, is it a fairly handy debugging tool? Or do you find the "highlight execution" tool is more useful? Any tips on using the "breakpoint"?
I mostly use highlighted execution, but it has it's limits..
For instance if you use a test executive like TestStand which calls a LabView vi, you may want to include a breakpoint to look at what is happening at that instance of the code. You can step into the vi, then use the highlighted execution to see all the values, etc.
If you have vi that need to run in "real-time" (transactions that are time-constrained), so you can't have "Highlighted" execution on all the time, you may want to freeze a certain portion and look at that. Breakpoints are very useful for this.
Experiment with it.. Who knows, you may like it as much as the highlighting the execution (which can be too slow at times).
Both are good tools.
JLV

Similar Messages

I have a white iPad, 64GB, only wi-fi, and I have 235 apps in it, now I am trying to download more apps, but it isn't happening, so my iPad can only hold that much, help me someone.

I have a white iPad, 64GB, only wi-fi, and I have 235 apps in it, now I am trying to download more apps, but it isn't happening, so my iPad can only hold that much, help me someone.

Bit more info please. Connect to iTunes on your Pc/Mac click on your icon and confirm your memory usage in the Capacity bar at the bottom of the Summary page. Try also unticking some Apps you use less frequently in the Apps section in you iPad's pages in iTunes on your pc/mac, sync afterwards to clear them off your pad then try downloading again.
Regards,Ct

HT2518 My daughter has to go from a PC at school to our Mac. We have Microsoft office installed on the Mac and she uses Word and PowerPoint and prints them. What we need is the how-to to moves the files to a flash drive so she can use them at schools, PC.

Our IMac has Microsoft Office installed so my daughter can do homework. The problem we have is moving files to a travel drive to take work to school to use on the school computer (PC). How do we do it?

The Mac's Finder is the same thing as the Windows Explorer. Insert your Flash drive and you will see it become available in the sidebar of a Finder window under "Devices." If it does not appear here then try going to the Finder menu, select Preferences, and then in the Sidebar section checkthe option to include "External disks" in the sidebar (you can also check the option in the General section to have disks show on the Desktop).
When this is done, you can then drag any file from any accessible location in the Finder to the disk device in the sidebar and have it copy to the disk. You can also select items (use the Command and Shift keys in selecting to select more than one item) and then press Command-C to "Copy" followed by going to the disk, opening it, and pressing Command-V to paste the items to the disk and effectively copy them that way.
When finished select the disk and press Command-E to eject it, which can also be done by right-clicking it and choosing Eject, dragging it to the Trash from the Desktop, or by clicking the little Eject button that appears when you hover your mouse over the drive in the sidebar.

Dell switch 8024F - Front left LED is flashing red - no connect terminal

Hello,
I have a DELL 8024F switch not connected console me.
The console cable is correct.
The LEDs on the switch are as follows:
LED right power source is green.
Left power source does not exist.
LED fans are green.
Front left LED is flashing red.
What can happen?
I have inserted several SFP + and are led as if they were not inserted.
I get the feeling as if you did not initiate the boot process.
Any suggestions?
regards

Hi,
The blinking LED typical means a non critical error, but if you can’t connect to console and it doesn’t recognize any SFP+ transceivers, it could be a more serious error. If you unplug it and then reconnect power is there any change? Have you reseated the power supply and fan modules?

LED flashing red.

Hey, i have the blackberry pearl and i just recieved it from a friend. I was doing something with my desktop manager and all of a sudden my phone shut off and then i took the battery out unplugged my phone and tried repowering it but it wouldn't do anything. Now it's sitting on my charger with no battery but is still flashing red. What can i do to fix this?

Welcme to the Frums
http://supportforums.blackberry.com/rim/board/message?board.id=Bold&thread.id=8100
Nurse-Berry
Follow NurseBerry08 on Twitter

Just purchased an iPhone5 and can not pair my Plantronics Voyager Pro HD. I can't get a flashing red/blue signal light.

Just purchased an iPhone5 and can not pair my Plantronics Voyager Pro HD. I can't get a flashing red/blue signal light.

Did you press and hold the power button until the LED flashes alternating red/blue - you may have to hold it for quite a few seconds. If the LED is not flashing red/blue, then it is not in pairing mode, and I would then call Plantronics tech support as their manual has nothing else to offer (I have the same headset, but I had no problem pairing with my iPhone 5 when I upgraded from my iPhone 4).
In the USA, call 1-866-363-2583 for Plantronics.

I can't move a layer in photoshop CS6 Beta for Mac. I just get a red border

I can't move a layer in photoshop CS6 Beta for Mac. I just get a red border around the canvas. Any Ideas?

You might want to try posting in the CS6 forum.
http://forums.adobe.com/community/labs/photoshopcs6?view=discussions

Update to iOS8.1 on iPhone 6, getting a flashing red screen alternating with Apple screen. Can't power off or do anything else.

While updating to iOS, it appeared that the download was progressing so I laid my phone down. Checked about a half hour later and I now have a continuously flashing red screen that alternates with the Apple screen. I can't power the device off nor use the home button. iTunes doesn't recognize the phone so can't sync or reload.

Hello rwax,
The troulbeshooting steps detailed below can help get your iPhone to successfully power on.
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/en-us/TS3281
Cheers,
Allen

HT1212 Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold hom

Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold home button to reset please help.

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do I restore my Ipad 4 from my desktop computer? My charger was broken. I bought a new one but now it won't charge. I have a BATTERY bar in the middle of the screen that is flashing RED and I have a symbol on the bottom that looks like a charger.

How do I restore my Ipad 4 from my desktop computer? My charger was damaged so I bought a new one but it won't charge. On my Ipad, I have a BATTERY bar in the middle that is flashing RED and an icon on the bottom that looks like the end of a charger. I have tried to force into reset mode, by holding the sleep key and home button SEVERAL times but it does NOT work. I have plugged my Ipad into my desktop computer, but I do not have a screen on my desktop that is coming up. THIS HAPPENED BEFORE AFTER I DID AN UPDATE AND WAS LOCKED OUT AND I USED EITHER ICLOUD OR ITUNES TO RESTORE, NOT SURE WHICH AND I FORGOT HOW.

Hi MrsMoosie,
I'm sorry to hear you are having these issues with your iPad. If your iPad isn't responding or doesn't appear to be charging, you may find the information and troubleshooting steps outlined in the following articles helpful, in particular the following portion:
If you don't see the charging screen within an hour, or you see the connect to power screen, check your connector, USB cable, and power adapter. Make sure that everything is plugged in firmly, free of debris, and not damaged. You might want to try a different USB cable or power adapter.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Screen is suddenly flashing red and purple, whats up?

screen is suddenly flashing red and purple, whats up?

Octopus Chef-
I think you will need the services of an iPad repair center. If you search for an independent iPad repair center, the cost of a non-warranty repair should be less than at the Apple Authorized Repair Centers.
One thing you can try is to reset (reboot) your iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

My Curve won't turn on and no sign of flashing red light

Hi!
I m all new to this blackberry forum thing....anyway i have a blackberry curve and all of a sudden yesterday it just stopped working. when i looked at the phone the screen was all white so i took out the battery and put it back on thinking that it will come back up but it didnt. Then i took the battery out again and plugged it to the USB(without the battery) because ususally it comes back up, but it still didnt. i put the battery again and plugged it to the USB thinking that it needs to charge but still no since of that flashing red light. I took the battery out and put my friends battery (cos he has a curve too) but still it didnt work. I did try holding down the power (red)button still not back on.
I just dont understand whats wrong with it, its not like i dropped it in the water or dropped it on the floor. I didnt do anything to it. It just stopped working.
Im really frustrated right now...I just dont know what to do..i hope someone can help me
THanks!

I finally got my curve to work. I just left it on the charger for a while and then it powered up. It seems if its a little low on power and I don't charge it relatively soon it shuts down and won't power up for awhile. I've also updated the software and cleaned out the junk files. It seems to be working fine now, go figure.
tm

Sony Xperia M2 flashing Red LED light and wont turn on.

Okay so i have been having this problem for about a week.I tried turning on my phone the other day but it wasnt doing that so i thought maybe it ran out of battery then i let i charge for a couple of hours and left it untouched.When i came back my phone was flashing a red light and the sony logo would apear and my phone would vibrate but then it would shut down again.This has been happening for all week i let it charge overnight but still the same thing happens flashing red and vibrating.Sometimes the light dosent flash and i can turn my phone on for a while but i never know when it could randomly shut down.i tried using the Pc companion program to try and fix it but my phone wont stay on for long enough for it to be able to do that.Any tips on what i could do ? the last thing i wanna do right now is call sony so please if you know any possible way of fixing this let me know

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you tried to power on the phone without SIM- and/or SD-card to see if this can help? Otherwise, a software repair via PC Companion would be recommeded:
http://support.sonymobile.com/global-en/tools/pc-companion/
In PC Companion you press start on Support Zone > Start on Update the phone/tablet software > Repair phone/tablet (the blue clickable link in the message) > Follow these steps without having your device connected to the PC.
Follow the instruction that appears in the program and do not connect your device until this guide tells you how to connect it. When you are going to connect the phone, the phone should be completely off. Hold the ON/OFF button + volume up(+) for 10 seconds.

I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now?

I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now? I left it overnight with the white screen, thinking maybe it'll go away and needs time to upgrade. Woke up this morning, nope still white screen. Very disappointed with Apple. I was so excited to get my phone and can't even use it right now.

First turn the iPhone off and back on and see if it works. If that doesn't work then do a Reset by holding the Sleep / Wake Button (The Power Button) and the Home Button at the same time until the white Apple Logo appears, the release both Buttons and wait until a Full Reset occurs. The iPhone 6 should come back to your Lock-Screen. If that doesn't work then you could connect the iPhone 6 via the Lightning Cable to a Computer with a Current Version of iTunes. Then open iTunes on the Computer and wait until your see a Button that represents your attached iPhone and click on it. This should bring up a Summary Screen on the Computer within iTunes. At that point your can choose Update Software if an Update is available or Restore the iPhone to Factory Settings / New In The Box, or you could try to Restore from your Backup if a current Backup had already been saved from a previous iPhone.
If you don't have a computer with iTunes and you can get the iPhone back on, then go to Settings>General>Software Update and see if the iPhone is still on iOS 8.0 or if it is now on iOS 8.0.2

Possible 8530 brick, HELP!! Just flashing red LED, Two then Three

I may have bricked my fiancee's phone
I connected it via USB cable to my PC, the PC responded as if it were a new device and started the driver install etc, it said the process was finished. The screen on the 8530 showed the computer hourglass twice on a black screen, and then went completely dark. The only sign of life from it is the LED flashing red, two then three flashes. The computer doesn't detect the device and neither does the BB Desktop Software.
I've pulled the battery, let it RIP, then put it back in and the same. Same with the battery out and the USB cable in. Same on wall charger cord.
I've Googled it to death and nothing has helped. Any and all suggestions are welcome, she's threatening severe bodily harm and more if I can't resolve this.... At the very least can any tell me what the phone is saying through the LED? It flashes red twice quickly, short pause, then three quickly, then repeats after about 3-4 sec.
HELP!!!

Hiya!
You can use JL_Cmder to wipe/ reload the OS to the device. Go here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work for whatever reason, try here:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
See if that gets it.
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Flashing red border! (She can't hold it much longer, Captain!)

Similar Messages

Maybe you are looking for