Flashing screen on envy after upgrade to windows 10

problem with screen flashing continuously after upgrade to windows 10.  unit was originally window 8 then upgraded to 8.1.unit has done this since its initial upgrade start sequence.

I seem to have fixed this issue.Check each of the HID drivers power management tabs under device manager and uncheck allow the computer to turn off this device power. Additionally enable HID service to start automaticvally under services.msc

Similar Messages

  • HP Pavilion 11 x360 - touch screen not working after upgrading to Windows 8.1 Pro

    I installed windows 8.1 pro and now my touch screen isnt working. i checked system screen and it says NO PEN OR TOUCH INPUT AVAILABLE  
    and i have 2 keys swoped on my keyboard. The @ and " i

    Hello theow,
    Welcome to the HP Forums!
    I understand the touch screen on your notebook is not detected after updating to Windows 8.1. 
    This would be the best place to start: Troubleshooting Touch Screen Issues in Windows 8. This is a great document that covers touchscreen issues from start to finish. Do not be alarmed that it states the document pertains to TouchSmart PC's, as the steps are the same.
    It would also help to know which product you are using so I can give you more detailed information, such as driver downloads.
    For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
    Hopefully this gets you going!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

    after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
    Although IE11 works, it doesn't work correctly.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Drivers missing for Envy 6 after upgrade to windows 8

    There are a few missing drivers shown on the device manager after Upgrade to windows 8 for model: Envy 6-1006TX.
    The four items are:-
    1. PCI Device
    2. PCI Simple Communications Controller
    3. Unknown device
    4. Unknown device
    I try to find it on the support and download page on the product support but could not find.
    i even go to HP Support Assistant website to try download the support assistant for window 8, but the links is not working.
    Can anyone assist ? Thanks

    Enter the Device Manager in Windows 8 by holding the Windows key and tapping the x key once. In the menu that is invoked, select the Device Manager. Right-click on the unknown device and then select the details tab. See the following image. I arbitrarily selected a device as an example. 
    Post the image by using the snipping tool. The snipping tool can be found by using the Windows key + x and selecting search. Type in "snipping" and the snipping tool link will appear for you to click on it and use as in the following image.
    Post all that is before the &SUBSYS in the top PCI\VEN alphanumeric string and I can use it to see if the manufacturer of the device has  posted a Windows 8 driver. Sometimes the success rate for finding a driver is greater at the manufacturer website.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • 2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

    Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment.  In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

  • Can't print in PSE11 after upgrading to windows 8.1

    I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

    I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
    Tracy Ferreira 2607 Woodruff Rd.
    Suite E-126
    Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com  
          From: hatstead <[email protected]>
    To: Tracy Ferreira <[email protected]>
    Sent: Tuesday, March 10, 2015 1:58 PM
    Subject:  can't print in PSE11 after upgrading to windows 8.1
    can't print in PSE11 after upgrading to windows 8.1
    created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Ethernet LAN not working after upgrading to windows 8.1

    After upgrading from Windows 8 to 8.1, my Ethernet LAN is no longer working. Wireless LAN connectivity is OK. I have run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I do not see a 8.1 driver listed for the Ethernet LAN.

    You're very welcome. See if the recovery manager still works so you can roll back to W8. Please read this guide for how to use it. http://support.hp.com/us-en/document/c03489643 If it doesn't then you will have to order a set of recovery disks from HP, or you can install this plain W8 OEM software this guy has posted on a link. Lots of folks have used it successfully, which is why I posted it. https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1 Then use this tool to make the iso file bootable to a DVD or 4+ GB USB flash drive. http://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool Yes, that really stinks why you and I could not upgrade without an issue. I disabled about 5 or 6 devices in the device manager and the code 12 would not go away. I have no clue why the PC works fine on W8 but not on W8.1. My notebook is a few years older than yours and it worked fine on W8.1 but not on W10. Go figure...

  • WPA security Types are missing after upgrading to Windows 8.1

    After upgrading from Windows 8 Pro 64bit to Windows 8.1 Pro 64bit on my Sony Vaio Duoe 13, I could not find WPA security type while configuring Wireless network manually. (only WPA2 and 802.1X are available).
    I have done a lot of troubleshootings like
    1-Reinstall Wirless original driver
    2-Updating the wireless driver to the latest
    3-Uninstall and reinstall windows 8 then upgrading again to windows 8.1
    But the same.
    Is there any way to add WPA to the security type?

    Yes! It works!
    To recap : My laptop has an Atheros AR9002WB-1NG adapter, windows 8.1. Even when it had windows 8, it was unable to connect, but unlike now, I didn't look closely enough about the type of network. Originally I thought it was
    this problem. But they confirmed that others with windows 8 had no issues with this. Then , when I tried configuring the network manually, I could not find the WPA-enterprise option at all, only the
    WPA2-enterprise.
    So here I was, and Greg Seth's answer gave me an idea.
    In the following instructions, some commands are obvious, so I won't explain unless necessary. So here's what you do :
    0) Go to command line, preferably Administrator (not tried without).
    1) C:\Windows\System32> cd \Users\<User>\Documents
    2) C:\Users\<User>\Documents> netsh
    3) netsh> wlan
    4) netsh wlan> show profiles
    5) delete profile name=<yournetwork>
    Enclose the name of network within quotes, this is to ensure that you can cleanly set up the right profile. Don't close the netsh, we'll need it some more. If you do, just reach there the same way as before.
    6) Right click the connection icon in lower right corner > open Network and Sharing Center > Set up a new connection or network > Manually connect to a wireless network
    7) Try to create a profile, and try to get as many details to correspond with your requirement. The rest we'll edit in command line, so let's make it as easy as possible.
    8) Do the same at the next screen. Edit Network settings > change all the parameters that you can, to match the requirement. My university tech support has a detailed document listing the options to choose, usually for windows 7, or even windows 8. get
    as many of them as possible.
    9) Finish. Move back to your netsh terminal
    10) netsh wlan> show profile <profilename>
    without quotes this time. This should show your previous attempt at creating a profile in the GUI dialog boxes. In my case, it had WPA2 and AES. It has to become WPA and TKIP. I also set my authMode to userOnly, since I hadn't done it right in the dialog box
    before.
    11) netsh wlan> set profileparameter
    displays a humongous list of parameters with detailed options, just carefully examine the syntax. It's all here.
    12) netsh wlan> set profileparameter name=<profilename> authentication=wpa encryption=tkip authMode=userOnly
    13) netsh wlan> set profileparameter
    Don't exit this yet.
    14) Now click the connection icon, and connect to the network. It will ask you the username and password in a different style, that was my clue something was different this time.
    15) It should connect. In my case atleast, it did. Verify by browsing.
    16) netsh wlan> export profile name=<profile name>
    In order that you're not put through this ordeal again, export the profile safely to a file. Again, the profile name in quotes.
    17) Wonder why microsoft makes things difficult for us!

  • USB device keeps disconnecting/connecting after upgrading to Windows 8.1

    I have a device(Pedal for Sim Racing) connected via USB, everything is working fine in Windows 7 and 8 but after upgrading my machine to Windows 8.1 the device keeps disconnecting and connecting for like every 2 seconds. But after I open the Property Sheet
    in Game Controllers panel the disconnection issue was gone, if I reconnect the device the issue persist. Other people who have similar device also encounters the same issue after upgrading to windows 8.1. The issue persist with or without the device driver
    installed. 
    Any idea, what might cause this? 
    Best regards
    mark

    I'v got this exact same problem with my Win 7 desktop.  I've also got pedals and wheel but don't see it as different than all the other USB devices.  I'm using a bunch of USB, but no hubs, including 3 external storage hard drives. But the momentary
    disconnect appears in all devices as best as i can see..even my long time trouble free head phones..keyboard..and all.  Sometimes the sound goes away and if I unplug and replug them the sound comes back, and other times I have to exit and re enter the
    game. I also get video crashes ..maybe not related.IDK..and have to restart all, because I've got three black screens in Eyefinity. For years my system was trouble free and its just slowly started getting worse. I've thought it had to do with system "sleep"
    etc but long ago went to never sleep max performance etc..Makes no difference. Keep thinking its my hardware or my house wiring etc..But can't seem to solve it. I replaced my Mobo/chip/ram maybe 6 months ago and that appears to have not helped.  It seems
    to be getting worse. I hate to start replacing parts piece by piece..cost a lot of money and sometimes doesn't help.
    When I'm playing a game I can often hear "faint" sound of USB connect disconnect happening with regularity..that little bing/boink sound etc..So it must just be constantly happening...Seems weird. Didn't have anything like this happening years
    ago with pretty much the same hardware and same Win7 with the continuing updates etc.
    What can be causing this common problem?

  • Hi,catalyst control centre has stopped working after upgrading to windows 8 .

    Hi,
    i have a hp envy-6 notebook pc(Product number: B4P24PA#ACJ,Serial number:  [Personal Information Removed] , which comes with windows 7 home basic! after upgrading to Windows 8 Pro 64-bit operating system ,my catalyst control centre ,host application has stopped workiing .
    i have tried almost everything i could do but the problem still persists
    on every time restarting pc it displays the above error message.
    regards
    abhishek rao

    Hi,
    Have you checked in the Device Manager to see if all drivers are installed since upgrading? (look for yellow exclamation points)
    Uninstall the AMD driver and catalyst control center. Install the version  located in the download section of the web support portal for your sleekbook.It will install both driver (intel and AMD) and also switchable graphics capability if it previously existed.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

    My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
    Help please

    Hi asalamk,
    The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
    You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

  • What can I do if I get an internal power error after upgrading to Windows 10?

    QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
    AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
    First, you'll need to quickly set the boot options to Safe Mode:
    1. Hold the Windows key and press 'R' to open the run box.
    2. Type MSCONFIG, then press ENTER.
    3. Select the BOOT tab.
    4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
    5. Click Apply, then OK.
    6. Click Restart. (If prompted, click Restart anyway.)
    From Safe Mode disable the AMD Display Driver:
    1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
    2. Click Device Manager.
    3. Expand Display adapters to show the two display adapters.
    4. Double click AMD Radeon R9 M200X Series.
    5. Select the Driver tab.
    6. Click Disable, then click Yes to confirm.
    7. Click Close.
    8. Hold the Windows key and press the 'R' key to open the run box.
    9. Type MSCONFIG, then press ENTER.
    10. Select the BOOT tab.
    11. Uncheck Safe boot.
    12. Click Apply, then OK.
    13. Click Restart. (If prompted, click Restart anyway.)
    From Windows 10 started with the AMD Display Driver disabled:
    1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
    2. Click Device Manager.
    3. Expand Display adapters to show the two display adapters.
    4. Double click AMD Radeon R9 M200X Series.
    5. Select the Driver tab.
    6. Click Update Driver.
    7. Click Search automatically for updated driver software.
    8. An AMD driver should be found and installed.
    The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
    The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

    I'm having the same problem.  I got error message 21.  I went to apple store.  they are saying i have a hardware error.  Really, my phone was working before the update.  Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child. 
    Help please,
    I will be glad to go back to the older software update

  • My HP LaserJet 1536 Scanner will not work after upgrading to Windows 10

    I just upgraded to Windows 10, and now the scanner will not work, although I can still print.  I downloaded the latest driver, but this does not seem to help.  The error message I get states that scanner communication cannot be established. Please let me know if you have any suggestions. Thanks!

    Greetings , I saw your post regarding the problems you are having with scanning after upgrading to windows 10.
    I would start with the simple, have you tried just restarting the computer? Have you made sure your computer has all of it's windows updates? How can I tell if my computer is up to date? Most products do have updated software available for Windows 10, did you install the correct driver?HP LaserJet Full Feature Software and Driver I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too.  HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive.  Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8 
    (It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type ...Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan.  Have you tried just using the New Scanner app in Windows 10? It's the same as the one for Windows 8. Here are some resources;New Scanner app in Windows 10Scan app for Windows: FAQ
    And a Video link...    Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks, 

  • T440s freezes when plugged in to AC after upgrade to Windows 10

    After upgrading to Windows 10 my T440s shows the following behaviour: It boots up fine with the AC adapter plugged in. Now if I unplug power it goes into battery mode, i.e. darker backlight etc just fine. Now plugging the power back in, the screen gets brighter but the UI freezes. The screen freezes and the mouse pointer doesn't move. It doesn't seem to completely lock up though because when I unplug the power again everything comes back to life again. I have installed the latest Windows 10 drivers I could find to no avail. Anybody have the same experience?  Thanks, Carsten 

    I am happy to report that this is fixed after upgrading the Intel HD Graphics driver from Windows Update via Device Manager. Not sure why that hadn't shown up as available directly in Windows Update. 

  • My Hp Ency laptop gets super hot after upgrading to windows 10

    Hi there,As I mentioned , my laptop gets very hot after upgrading from windows 8.1 to windows 10.Is this a known issue?thanks Payam HP ENVY TouchSmart 15 Notbook PC

    Is it an AMD graphics card? If so, it's an issue with the new AMD drivers that a lot of people have been having. Report this issue to AMD: http://www.amdsurveys.com/se.ashx?s=5A1E27D25B93E7EE

Maybe you are looking for