Flashing windows

When I start my computer and open a window it starts flashing and it is very difficult to write during a flash. When I restart the computer and type my password the screen goes black. I must use ctrl-alt-delete and log out. Then I can log in but the windows is still blinking. Please help me! My computer is only 2 month old.

OMG, this happens to me too!! Sometimes it helps me to restart your computer.

Similar Messages

I work with a website where I need to open a flash window to examine the changes that I have made. I cannot use my mouse inside this flash window. Help?

I work on a website where I open a flash window to see how the changes I have made look. When I open the flash window, my mouse no longer works properly - I cannot click into the window - and scroll down to look at it. It also seems to "lock" up the page as I cannot click anywhere sometimes on this page (original or the flash window.) If I click on a different page completely and then go back, it seems to reset (actually sort of blinks) and then I can close the flash window. When I use the touchpad on my laptop, it works fine. When I use internet explorer, it works.

What kind of menu opens if you right click in the Flash area? 
Is that the Flash player menu?
You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
*https://support.mozilla.org/kb/flash-113-crashes

After viewing a site with a flash window in it, the next site shows a blank rectangle where the flash window of the previous site was. This persists through all subsequent sites. How can I eliminate this flash window persistence?

using the latest Firefox Beta, after opening Shambhala.org site, the flash window shows up as a blank rectangle on subsequent sites. I am using Mac OSX 10.6 Snow Leopard. The only way I can get rid of the blank rectangle is to restart Firefox.

That sounds like a known problem on OS X. From the known issues section of the [http://www.mozilla.com/en-US/firefox/4.0b5/releasenotes/ Firefox 4 Beta 5 Release Notes]
"Plugin content can be rendered incorrectly leaving blank white squares over web content. Scrolling or switching tabs will often fix the problem, although sometimes you must close the tab which contains that plugin content (see [https://bugzilla.mozilla.org/show_bug.cgi?id=592453 bug 592453])"
This should be fixed in the next beta.

Flash animations are out of the flash window limit ...

When I place a flash animation in power point using breeze
presenter, and I publish the presentation it is possible to see the
animations that are out of the flash window limit …
What can I do to make the breeze respect the flash limits and
hide the animations outside those limits?
Thanks!

Just out of curiosity....is it possible that you've got
elements in flash that begin OFF the flash stage and then animate
ONTO it?
There was a *funky* artifact of creating flash animations
that played very strangely when imported into Breeze; there was a
tech note about this, but I haven't found it recently. If your
flash animation *must* be 200 x 200, then what I'd try is this:
In flash, create a mask layer and be sure to have all other
layers become masked by it. I realize that without seeing your
animation, that it's probably "easier said than done"... However,
the thing to note here is that by masking the stage in flash (and
thus all the elements animated within it), you'll effectively kill
the visibility of all visual elements that are off the stage.
For what it's worth, I'd be happy to assist if you need
further help. Just drop me a note using the private message
function, or email me at [email protected]
HTH,
Rob

Flash windows in web page do not print preview or print - works in IE

Specs:
Win XP Pro, SP3, Laptop and Win 7 Desktop
FF 3.6.10
IE8
Latest flash for IE and FF - 10.1.85.3 (previous 10.1 versions also issue)
I routinely use www.speedtest.net and www.speakeasy.net/speedtest to perform speed tests for troubleshooting issues. Both use Flash windows to show the Download/Upload speed test progress and final results.
In IE8, both ''print preview'' and ''print'' work and display/print the contents of the flash windows. In FF, everything displays/prints properly expect the content of the Flash windows - they are blank.
Apologize, as I imagine this has had to be reported in the past as I've seen posts via Google search going back many years, but could not find anything recent in FF help or forum. In addition, I assume this could be a Flash issue. However, if it is, it is not impacting IE. Regardless whether an FF or Adobe issue, I believe that Mozilla should head up and manage the repairs.

If you just need an image of the page (not the browser frame or full desktop), the FireShot extension will do that. I have been using FireShot for some time and am quite happy with the results. I just tested it on www.speedtest.net results on my XP system and it worked. With Fireshot, you can add notations and print or save the image (full screen or just visible area). Do not opt for the paid "Pro" version, just use the free version. If you use it, you may want to block outgoing connection to screenshot-program.com in your firewall; I do not know why it tries to make that contact with it each screen capture, but it works fine with the firewall blocking the outgoing connection.
FireShot: https://addons.mozilla.org/en-US/firefox/addon/5648/
 
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe PDF Plug-In For Firefox and Netscape "9.3.4" (ver. 9.4.0.195, a security update, was released 2010-10-05)
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#**On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#**If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link and more information''': https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#*After the installation, start Firefox and check your version again.

CS4 Mac - File Dialog Moves Flash Window Down

I have Flash CS4 10.0.1.545 Mac with OS X 10.5.6:
I have the standard Workspace and when I select Import to import an image, the open file dialog in OS X slides down from the top of the stage and the entire Flash window that is holding my timeline and stage moves down about 100 pixels. I then import, then I click the top of the window to move it back up and it snaps back instantly as soon as I click on it before I drag it up.
Anyone else getting this on the Mac?

The only way to avoid this is to resize the dialog so that it's so short it doesn't go down past the Dock. Since this dialog spawns at the top of the stage, putting the timeline at the bottom instead of the top helps.

Flash window component

I have created a flash window component that pops up, every
thing works ( it moves, it displays the content and closes) but it
disables everything else. is there anyway i can enable the entire
movie aswell as the window?
Jak

BTW, this also happened with the List component, and in
v10.1.0 aswell.
If you're interested in more about this bug, bowl on over to
http://www.experts-exchange.com/Web_Development/Software/Macromedia_Director_Video_Softwa/ Q_23580077.html#a22076034
As for a solution...
Turns out that the factor that makes this happen is if
backgroundAnimation is off.
Turn it on, and the issue disappears.
I did this in the projectorName.ini file, with the line:
[Settings]
BackgroundAnimation=1
or, if you're creating a projector, and not using a .ini
file, by checking Background Animation in the publishing settings
dialog.

VI to be displayed in Flash window

Hi
I need to pop up or display my sub vi(to give some input ) in the flash window from my main Vi .the sub vi need to be displayed only in flash window with no status bar like file ,edit etc.i have attached the example vi.paste the two vi and run main vi. sub Vi need to be flashed
Attachments:
MainVi.vi ‏8 KB
SubVi.vi ‏9 KB

Hi Parthipan,
To pop-up/flash your SubVI, you need to keep its code inside a while loop.Then only, it ll be shown [popped-up] cntinuously till the user clicks the OK button after giving the required inputs. Else, it ll only blink for a sec and disappear.
You can go to VI Properties thro' File menu & go to Window Appearance category & remove (uncheck) the options to show Tool bar & Menu bar and some other related stuff. Then, they wont reappear while running.
Try these things out & post back here if you have any further doubt or difficulty.
- Partha
LabVIEW - Wires that catch bugs!

Opening an external Flash window from a Flash window

I'm working on a project in Flash. The project consists of
menus and sub-menus where when a menu is clicked-on, an external
Flash window opens with another menu. Please tell me how to do
this. I hope that this makes sense. Please tell me if you have any
questions if it doesn't. Thanks.

Hi michaeltowse,
This is indeed something more complicated. Let me give you
some details about the project:
This project is to be initially created in Adobe Captivate.
It consists of the main menu that is to be created in Flash (menu
1); sub-menus, which are to be created in Captivate (menu 2); and
menus of sub-menus, which are to be created in Captivate as well
(menu 3). Now, the part where I need help on is the part that goes
from sub-menus (menu 2) to menus of sub-menus (menu 3). When any
option is to be selected from the sub-menu (menu 2), a new window
is suppose to pop-up (menu 3) that is suppose to be in Flash. This
new window is suppose to be a new Flash window and is not suppose
to be opened in a browser, but it's suppose to be opened in another
Flash window (SWF window). This whole entire project is to be
executed via an embedded Flash executable. Thus all the .SWF files
that were created in either Captivate or Flash are to be tied
together via a Flash executable. I was told in Captivate's Forum
that this may be done via ActionScript in Flash and I'm wondering
whether that is that case. Please tell me if my project makes
sense.
Thank you.

Safari causes flashing windows

I've recently upgraded to Mountain Lion. I've noticed now when I run Safari web browser, I keep getting flashing windows on the screen. The size and location of the window appears to be random. Even typing this message I'm getting the weird flashes! Sometimes, they don't appear in the same window and appear down the right side of the Mac screen. Is there in the bug in the software? Is there something I need to update? Has my machine got a virus?

The next time you have the problem, note the exact times when it starts and ends: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Scroll back in the log to the time you noted above. Post any messages timestamped during that interval – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Will Verizon offer an option to flash Windows 8.1 on my Android HTC One M8 ?

Will Verizon offer an option to flash Windows 8.1 on my Android HTC One M8 ?

I know we all anticipate updates to our devices divingston766. At this time, we don't have information about a new update for your phone but you can keep track of current updates via this link http://vz.to/1g9pPsw. Are you having any issues with your device? We can help.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

Issues with using webcam in Flash Windows 8.1

Hi there
Anyone else experiencing this and can help?
I have recently upgraded to Windows 8.1 and ever since then I cannot get Flash Player to display my webcam on various chat sites and realtime messaging tools.
All i end up with is a white pane where the webcam image should be. Is there any way of getting this to work as this is causing lots of problems for me?
I have tried changing the settings, running in compatability mode etc but nothing seems to work. As I am on Windows 8.1 I cannot even try the Flash Player 12 beta to see if that resolves it.

8.1 is (with the possible exception of Vista) the worst abomination Microsoft ever released. And IE11 (which I suppose you're using too) is every bit as bad.
The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Cannot view third party flash (windows 7)

I've been trying to check the box to enable me to allow third party content but it will not check no matter what I do.
I've seen people post about this before, but the other posts were from users with different operating systems. I'm running windows 7 with firefox 3.6.12 and adobe flash 10.1
Please help..

Delete the 'Flash Player' folders at %APPDATA%\Adobe and %APPDATA%\Macromedia and try again. (Type or copy/paste these addresses into the Windows Explorer address bar.)

Imbedded flash window does not size

I have an indesign cs5 document in which I have placed a swf file from flash catalyst. The swf file alows the reader of the document to click through a series of images. When I create a pdf file from this, all works well except that when the pdf page is scaled larger or smaller, the swf window does not scale (unless the page is so small that a part of the swf window would be outside the page and then the window does shrink). Placed jpg images on the same page do scale as expected. Is this lack of handling of swf in a window a reader bug? Or, is there some paramenter that I have not yet found that I need to set in either the flash catalyst file or the indesign file? Thanks...

Thanks for the response. That will make the size of the font and such bigger but the frames that are displayed do not fill up the whole window. As a result I do not see all of the content in a single window.

Encore CS3 crashes when building to Flash (Windows)

I've built a project that has no problem burning a DVD or rendering an ISO image. However, when I try to author a Flash version of the project, it spends hours transcoding, then Encore CS3 crashes. (Generic Windows "Encore CS3 has encountered a problem and needs to close" error.) The only issue that shows up when checking the project is an orphan timeline, but it is linked into the project through playlists.
Any suggestions on how to create a flash version successfully?
Specs:
AMD Dual Core 4800+ (2.51Ghz)
2 Gigs memory
Windows XP SP3

I'm also having issues with Encore crashing all of the time. Whenever I try to build a flash file it crashes near the end. I have a few large videos in there and can build a flash file without the videos in, but why does it keep crashing when the videos are in.... I thought this is what this software is designed for!
Has anyone had any luck getting around their crashes?
To reduce the size of the videos what setting do you suggest changing?
Thanks and good luck to everyone else using Encore!
Matt.

Flashing windows

Similar Messages

Maybe you are looking for