FlashIslands In WebDynPro ABAP

Hi
I integrated Flash Islands Into Webdynpro Abap..Flash Island Is displaying..but the values which im passing through wddoinit method to the frontend is not displaying..binding from context nodes to gacproperty is done( name same as flex field is given )....
Thanks & Regards,
Vasavi

I can talk to the flash component ok - I just cant access positions at application load time so that I can pass the positions to the embeded flash after it has loaded. I can access the bound data on click of a button and pass the positions then but that is too late. When I'm talking about application load I mean the Flex application not the embeded flash one - sorry for not making that clearer - not sure if my terminology is correct...

Similar Messages

Best way for binding tables from webdynpro Abap with FlashIsland

Hi,
We've found several ways to access ArrayCollection columns in a Flex application embedded in an Abap Webdynpro.
The SAP System is SAP Netweaver 7.01 SP7 and the flex application is compiled with SDK 3.0.
1/ Syntax like MyArrayCollection[n][Column1]. In this case, the GACProperty's name of the GACDataSource must be "Column1" and it is case sensitive
2/ Syntax like MyArrayCollection[n].COLUMN1 where COLUMN1 is the attribute's name in the webdynpro Abap context node. In this case, the GACProperty's name seems to not be important, and the column's names of the ArrayCollection must be upper case.
Do you know which is the best way to do the binding and why?

Check the Explan Plans for indexes, join orders
and also check the link
http://forums.oracle.com/forums/thread.jspa?messageID=2222015&#2222015
Regards
Singh

Integrating Silver light ISlands to Webdynpro ABAP Applications

Hi Experts,
In my project I want to enhance the UI of my application by using Silver Light Islands.
I found that it is possible in Webdynpro ABAP . The following link i have seen ...
http://help.sap.com/saphelp_nwpi71/helpdata/en/ba/b89348d6eb49eb8ff35a9bcfb9a59f/frameset.htm
But I did't find any option for integrating Silver Light Island in my system. Iam using SAP ECC 6.0 with following details
SAP_ABA     701     0006     SAPKA70106     Cross-Application Component
SAP_BASIS     701     0006     SAPKB70106     SAP Basis Component
PI_BASIS     701     0006     SAPK-70106INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0000          -     SAP Solution Tools Plug-In
SAP_BS_FND     701     0006     SAPK-70106INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     0006     SAPKW70106     SAP Business Warehouse
SAP_AP     700     0019     SAPKNA7019     SAP Application Platform
PLease help me in which version I can find it or Send me some examples if any.
THanks,
Dayakar Padibandla

You are running NetWeaver (SAP_BASIS) 7.01. Silverlight Islands is not avaiable until NetWeaver 7.0 Enhancement Package 2 (7.02). Therefore you do not have Silverlight Islands functionality in your system. You could instead consider FlashIslands. They are available on 7.01 and are the same concept excpet they use Adobe Flash/Flex instead of Microsoft Silverlight.

Folder selection in webdynpro abap

Hi,
I have a requirement to read all the files present in a folder,i have searched for frontend classes but doesnot work in webdynpro abap can any one suggest how to acheve the functionality
Thanks,
Shailaja Ainala.

You have to remember that you are in a Web Browser and therefore are subject to the sandbox security restrictions that the web browser enforces. This means very limited access to the frontend client machine compared to SAPGUI applications.
>I think Thomas Jung has written an e-Learning on this topic, but I believe the premise is that you can use ACFExecute to cause a directory listing to be executed and then ACFUpDownload to download that listing and then download the files.
Its not quite that easy I'm afraid. ACFExecute can't return data to the Web Dypro Application. It is desgined to trigger interactive applicactions not become a data interface between them (although you can pass startup parameters for the application). ACFUpDownload will let you silently upload multiple files (thanks to the use of a Java Applet), but doesn't have any file selection dialog. It was originally designed for KPRO - where you have file check-ins and know the file locations from the document records. A file open/save dialog for ACFUpDownload isn't added until 7.02. Even with the dialog you would still need user interaction to select the files - it can't just read all the files in a directory. Note: both ACFExecute and ACFUpDownload are new in NetWeaver 7.0 Enhancement Package 1.
You could also try a FlashIsland (also new in 7.01). I have a sample of multiple file uploads using Islands as well on SDN. However same issue here - you can't just read the file structure of a directory. Even in Flash/Flex you are somewhat sandboxed - and the user must select the files they wish to upload (although they could select all files in a directory and upload them all at once).
The other solution (which can be done on 7.0) is to have the user manually ZIP the entire directory and then upload the single ZIP file with the normal FileUpload UI element. On the ABAP side you can use CL_ABAP_ZIP to parse and process out the individual files within the ZIP content.

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Error when Interative Adobe Form is called from Webdynpro ABAP.

Hi Experts,
I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
Line: -
The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Line: -
When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
Thanks in Advance.
Regards,
Arun.

Hello,
Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
and especially note 999998
Regards, Otto

How to display summation of a field in table displayed in Webdynpro ABAP

Hi,
I am displaying a table in Webdynpro ABAP. This consists of data for different PERNRs.
I need to display the sum of a particular column for each PERNR, after the end of each PERNR data. (table sorted by PERNR).
Is there any way to display this in the table? If so then please let me know.
Regards
Moderator message: wrong forum, please have a look in the "Web Dynpro ABAP" forum.
Edited by: Thomas Zloch on Mar 7, 2011 9:20 AM

Hello,
I believe you have created the query in SQ00.
Go to SQ00.
Select your Query.
Click on Change
On the Top Left Hand Corner, you will find "BASIS MODE"
Click on the Basis Mode Button
Once you click on Basis Mode Button, you will get "Title"
Change the title what you are intended to change.
SAVE the entries.
Execute the Query.
You will be able to see new Heading on the Query.
Hope this helps you.
Regards,
Ravi

Create PMD (Clinical Document) Document from Webdynpro ABAP

Greetings everyone,
I have developed two PMD document category(Tcode :N2T6 ) for Clinical documents in SAP R/3 and somehow with the limitation of R/3 in terms of developing user friendly screens like Auto fill and image processing etc...,Users do not satisfy with it.So we are planning to develop in Webdynpro ABAP.But i am not sure how do we integrate the webdynpro development with IS-H PMD (clinical documents) documents ,also I am looking for BAPI's to create our customized parameterized documents.Any help will be really appreciated.
Thanks,
Vignesh

Hi Vignesh,
You are right that certain features, such as auto-completion, are not supported in the PMD toolset. But as most of the data captured in those documents have a high importance for treatment process, you need to elobarate whether such a feature has any impact on patient safety. Just a quick one - user types An ... and the system determines matching diagnoses such Anorexia or Angina. In case the user picks the wrong one by accident the patient safety is an issue.
Other features such as image management can be used. For that you need to use a PMD link module which does provide the image integration. Siemens will ship in the next release EhP6 such a link module for a third party imaging software. Beforehand the link module use with custom development.
In general Siemens has started a product redesign program named "Smart UI". It's major aim is to provide an up-to-date user interface for all major application within i.s.h.med. The very first application we plan to ship is a web-based electronical medical record.
In case you still want to develop your application, I'm sorry to say, but there are no BAPIs or Web services in the standard delivery. For changes to existing documents you can utilize the PMD API of generator version 2. But be aware that document creation is not supported by the API. You need to have a document. Also certain user exit developments may brake a change without having the GUI running. For instance a popup in the save routine will cause a dump if no SAP GUI is available.
Hope this help.
Axel Biernat
Siemens AG
Product Commercialize

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

How to Download a PDF file from Webdynpro ABAP Screen

Hi,
I have developed a input form in webdynpro - ABAP(Not Adobe),
As I am not using above services here, but would like to download the information I am capturing into a PDF file.
can I do it without using adobe interactive forms ?
thanks
Siddharth

Hi siddharth,
My suggestion would be to create your output as a Smartform and call your Smartform in your View.
For more Click this link.
[HOW TO DISPLAY A SMARTFORM AS PDF DOCUMENT IN WEB DYNPRO FOR ABAP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785]
Regards
Bulent

How to disable Print button on WebDynpro ABAP ALV

In WebDynpro ABAP, a standard menu appears around the ALV, that has a PRINT button and an EXPORT button.
Is there anyway to disable those buttons????
Thanks
John

Hi John,
Check the interface if_salv_wd_std_functions. It contains methods which are used to hide the standard ALV toolbar buttons.
Also refer : Removing "print version" button in alv
How to hide Print and Filter option from dynamic ALV

Is there any way to create a folder in presentation server - webdynpro abap

Hello,
My requirement is to create a folder in presentation server using webdynpro abap..
I tried on this CL_GUI_FRONTEND_SERVICRES classes ..but its getting an short dump.
Is there any way to create folder using classes / FM..
Regards,
Praveen kumar reddy s.

Hi PRaveen,
Check this.. WD_TEST_APPL_ACFEXECUTE
Check Thamos article..
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
go for help..
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b91539878a2d67e10000000a42189c/content.htm
Cheers,
Kris.
Edited by: kissnas on May 10, 2011 2:24 PM

Error in opening webdynpro abap application

hi All,
I am facing below issue in opening webdynpro abap application, this is first WDA application in production system, please help me in resolving this issue.
============================================================================
Error when processing your request
What has happened?
The URL http://grp.mysap.pg.com:9500/sap/bc/webdynpro/sap/zgpuvstapp/~ucfLOADING was not called due to an error.
Note
The following error text was processed in the system GRP : A request for server adln5412 has been sent to server adln5411; see Note 1364846
The error occurred on the application server adln5411_GRP_10 and in the work process 3 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system GRP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server adln5411_GRP_10 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server adln5411_GRP_10 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: BS6402 -l: E -s: GRP -i: adln5411_GRP_10 -w: 3 -d: 20100929 -t: 140306 -v: ERROR_MESSAGE_STATE -e: A request for server adln5412 has been sent to server adln5411; see Note 1364846
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================================
Edited by: brahmanandam ausali on Sep 30, 2010 4:11 AM

Hi Shibli,
I'm facing the same issue with the POWL only if called from a part of the network outside our country (Italy) so I think it would be a network configuration problem as you suppose. Can you explain us the configuration of the balancer and dispatcher to solve the issue?
Thanks
Mattia

OnSelect event for a Drop down UI Element in Webdynpro ABAP Select Options

Hi Experts
We have built our UI based on the webdynpro ABAP Select Options. We have a requirement that, when we change the value of a drop down box in the UI, I need to hide some fields. Can anybody help me out in handling of OnSelect event of a drop down box built using webdynpro ABAP Select Options. We are on SAP Netweaver 7.0 EHP1.
Rrgards,
Srikanth.
Edited by: Srikanth Kancherla on Apr 29, 2010 10:43 PM

Hi Srikanth,
as you seem to be already aware, the component is dynamically built.
so you would have to enhance the code that builds the element and insert a reference to a new action (enhancement) that could handle the onSelect event.
What is it about this that you particularly want help with?
Cheers,
Chris

Position a UI element or container on a specific position in webdynpro ABAP

Hi All,
How can we positioned different UI elements on a specific location?. I mean whenever we drag and drop them on a view they seem to take their place automatically. Is there a way to give them a shape ( vertical/horizontal ) & position explicitly . Ill appreciate a quick reply from you people.
Regards,
Laeeq.

Hi Laeeq,
There is no way to absolute position something in Webdynpro ABAP (at least not that I've found), but there are some ways you can get things relatively in the way you want them. Try looking at the samples (SALV_WD_DEMO_TABLE*) and you'll see how they use a combination of transparent containers, groups, and the matrix layout to get things into position.
It does not allow for very fine grained control, but you should be able to achieve the look you are going for.

FlashIslands In WebDynPro ABAP

Similar Messages

Maybe you are looking for