FlashMX Components will not work in my new FCS2

Flash Communication Server MX Components will not work in my
new FCS2 ,
Components like: SimpleConnect, Cursor, Whiteboard, Chat,
Peoplist, AVpresence, etc.... all the old ones I have been using in
Flash MX. I now use Flash 8 it did not come with all the above
Components so I instaled (the old) in my Flash 8. I beleve there
may be script to up date the old (above Components) , or can I
download a set of NEW Components that do the same job as the old
(above Components) Please help I have spent 4 days on this HELP
Thank you. Raymck

It is a USB cord so I have to use the end  of the Shuffle I use to charge th Shuffle.

Similar Messages

  • My garage band will not work properly with new lion upgrade..HELP

    My garage band will not work properly with new lion upgrade..HELP
    I have tried to open old session i have done in garage band and many of the effects and instruments I have used will not show up. The system seems to have a bug.

    If the graphical user interface looks broken, that is quite often a problem of corrupted user preferences - have you tried to remove the preferences file, as described in the FAQ
    http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
    Here is again the short version:
    Quit GarageBand, if it is running.
    Open your User Library in the Finder. It is hidden in MacOS X Lion, so use the Finder's "Go" menu:
    Finder > GO    hold down the "Options" key, until the library appears in the menu, select it.
    In the window that opens, open the folder "Preferences" and remove the file:com.apple.garageband.plist and com.apple.garageband.plist.lockfile
    Then try again to run GarageBand and download the loops.
    The preferences file stores all you user settings that you set using the "Preferences" panel in GarageBand, also the layout of the GarageBand window and the location of your recent projects. You will have to enter these settings again after removing the file.
    Regards
    Léonie

  • Touchsceen will not work after installing new hard drive

    Hello,
    My HP TouchSmart 520 - 1047 c PC's hard drive crashed this week.  I went out and purchased a new one, installed it, loaded my Windows 8 Pro disc in, and got it back working.  The only issue so far is that my touchscreen will not work.  HP support says it's a hardware issue and was no help. 
    Please help.
    Thanks,
    Mike

    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Java script will not work after creating new page

    I am using dreamweaver cs3 and have a java script to rotate a banner in a template.  This script has worked fine in the past when I created pages in Dreamwever.  Now the  script works fine only when I test it in a template but when I try to upload to my ISP the script will no longer work.  At first I thought it was the ISP made changes but the person who sits next to me running the same version of Dreamweaver can create a page and the java works.  The java is placed in a template, tested by viewing in a brower and it works, however once I try to create a new page using the template the scriipt will not work.  To get around this I have the person sitting next to me save my template and then I can create pages.  Also if I save the template with my pc and it updates the pages created by the template the java will no longer work.
    This is very frustrating as I cannot create or modify my template on this pc.  What would prevent this from working?

    OK - now we are on to something ..... the script on the template only contains:
    function randomImages(){
      if(counter == (imgs.length)){
        counter = 0;
    MM_swapImage('rotator', '', imgs[counter++]);
      setTimeout('randomImages()', delay);
    However when I create a new page from the template with this javascript in it the code changes to:
    function randomImages(){
      if(counter == (imgs.length)){
        counter = 0;
    MM_swapImage('rotator', '', imgs[counter++]imgs[i]);
    function randomImages(){
      if(counter == (imgs.length)){
        counter = 0;
    MM_swapImage('rotator', '', imgs[counter++]);
      setTimeout('randomImages()', delay);

  • Font will not work on my new MacBook Pro

    I recently upgraded from an older macbook pro to a newer one. I had a font on the old computer (avenir) and cannot get it to work on my new computer. specifically the problem is with adobe photoshop cs5. i used to use the font with adobe photoshop cs3, which i also have on the new computer and also does not work.
    when i try to add the font to fontbook, that does not work either. it searches for a moment then nothing happens. any suggestions?

    John --
    Welcome to Apple Discussions!
    We're other Mac users here, asking questions and sharing solutions.
    I found this article by Adobe on Fonts on Macs.
    I hope it will help.
    http://kb2.adobe.com/cps/327/327791.html

  • TS2972 Home Sharing will not work on my new iPad Mini

    I have an iPad mini set up with home sharing on my iMac.  When I try to search my home sharing library on the iPad mini, the music app immediately crashes. Also, it will not sort the music by artist or album, only by song or playlist.  I have rebooted both of the devices multiple times and have verified that OS X, iTunes, and iOS are all up to date. Anyone else having this kind of problem with the new minis?

    Figured out my problem sharing my music library on a new iPad Mini (I think).  Two issues:  (1) I have two Apple IDs, the result of doing one years ago and forgetting about it when I set up another; Apple doesn't seem to be able to ever merge or otherwise fix this problem, despite the best efforts of smart folks at the Genius Bar plus of course I'm forced to have 3rd ID as my iCloud username, but never mind....).  I was logged in as one Apple ID and my music library is under the other.  Went to "Music" under settings, signed out under "Home Sharing" on that page, signed in again as the other Apple ID.  (2) Realized then that it was trying to share music from something called my iPad library instead of the library under my name, which is where my music is.  When I fixed these two things, it all shared nicely.  Whew!

  • How about telling us in advance what programs or plug ins will NOT work with the new Firefox. I just lost my "safe search" feature with AVG, and I think that's sort of important!

    Just upgraded to Firefox 6 (which I like, by the way), but when I upgraded to 5, I lost the gaming feature when I installed AVG, and now I've lost the AVG safe search feature, which I think is very important considering that I have grandkids that use my computer,
    How about telling us in advance (and I'm running Firefox, so a link would be easy) whether or not we're going to lose an important feature like the one I lost?
    So, how do I get back to Firefox 5 without uninstalling and reinstalling so I can have that safe search feature back?

    Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
    Contact information Dennis [email protected]
    Previous contact information with your organization (DURIM):
    Dennis - i just finished my audition trial and bought the subscription the 2014 version.
    created by durin in Audition CS5.5, CS6 & CC - View the full discussion 
    DURIM - Okay.  I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
    If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]?  We'll take a look in that logfile and see if it gives us more information about why this is failing now.
    Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro?  If so, do they launch as expected or fail as well?
    I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
    Audition Log- file
    Ticks = 16       C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
    Sent from Windows Mail

  • Some components does not work in a new created window

    Hi Guys,
    I don't know if there are some parts I am missing, but i
    could not get it work. Hope you can help.
    I created a native window for my AIR application from AS3.
    see the code,
    but there are some components in the newly created window
    does not work properly, e.g. the combobox, the drop-down list is
    not displayed, although the data is there. and the drag and drop
    interaction with desktop is also not working. Could anyone help?
    Thanks!

    Anyone can help?

  • A website that i use quite frequently will not work with the newer versions of firefox. Is there a compatability mode of some way to get the newer version to work?

    All the website says is this browser is not supported. Only version 3.5 is. I can list the url because it is a work url

    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Motion Tweening Components - Will Not Work

    I've been using Flash for a few weeks and have scoured and
    scoured, trying to solve what I'm sure will turn out to be a small
    issue I'm over looking.
    Basically, I have buttons, scrollpanes, and FLVPlayer
    components on my stage, in separate layers that work fine when they
    are on the keyframe that I add them to initially. However, I want
    to animate these components moving in and out of the stage (see
    www.rossmnewton.com for an example). So I make new keyframes before
    and after the keyframe I added the components on, copy the
    components, move to the other keyframe, paste in place, move it,
    then create a motion tween, and the animation works fine. The
    problem is, no matter what I do though, my buttons, scrollpanes,
    and any other component, will fail to work as soon as I apply a
    motion tween to them. Instantly, they stop working. And I can't
    figure out how to animate these types of components without
    breaking them.
    What am I messing up here? Can you not motion tween buttons
    moving around? Or an FLV player?
    And I notice that it creates "Tween 1", "Tween 2", etc.,
    objects of type Graphic in the Library.

    Hi,
    The Sample Calendar component download has been fixed for Update 7.
    http://developer.sun.com/prodtech/javatools/jscreator/reference/codesamples/samplecomps/calendar.html
    Also, the source is available and also is valid.
    Please read the brief instructions in NOTES.txt
    To build the source, you'll need to use ant
    http://ant.apache.org
    Then , in the build.xml file included in the zip, correct
    the creator.home property setting to point to the installation directory of Creator.
    hth
    John

  • Black ink cartridge will not work even though new; photosmart 5520 e-all-in-one series

    My printer suddenly stopped printing properly.  The black ink is no longer printing.  I changed the cartridge, thinking it might be defective.  I have cleaned the printheads several time, reset the cartridges etc.  and the ink still does not come out in the print quality diagnostic nor in documents that I need to print.  The printer is 2 years old.  Is there any other things  I could do to get it to work, before I go and buy a new printer????
    Any suggestions would be appreciated.

    Hi L_C54,
    Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5514, you are unable to print in black ink after replacing the cartridge.
    I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
    Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
    If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in?
    I hope to hear from you soon.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have upgraded to the new Firefox but removed it because my DAP premium will not work with the new version. Am I doing something wrong?

    DAP Premium seems not to be compatible with the new version

    Dear Old Bob..I enjoyed that! I and thanks so much ...I would have done it if I could have done it but I was blocked by Photoshop at every stage! Thankfully my own IT Guru and friend came to the rescue remotely last night and has down-loaded it. But it took him quite a bit of time.
    As XP is  faded out, there will be an awful lot of people like me complaining.
    But truth is my problems are only at a start! About 30 prints (some not yet on my 'blog' (juliamatcham.wordpress.com) all have varying settings which I have noted. Everything depends on these settings.
    All are Apple RGB (although my computer is a PC) and they were all set for my printer Epson Photo 1800. Also they were set at varying settings...Standard or Vivid 1.5, 2.5 whatever suited the design.
    These settings appear not to exist on CS2 which is a nightmare for me as each print was carefully proofed with a great deal patience and at some expense as in the end one has to use expensive paper even for proofing.
    If you have any hints for how to translate these old settings...I would kiss your feet!
    Just looking through how things work, I can't understand why I can't change my first printing option to landscape ...everything esle so far seems comprehensible.
    I do hate change!
    Meanwhile, thanks so much to Curt, Noel, Nahraka and Old Bob for cheering me on. I am obviously going to be back asking more questions about CS2!
    Julia

  • HT1218 router will not work anymore with new update- how do I fix this?

    I just updated to the current software and now I have no connection. I have tried to reset the airport extreme but I cannot get it to recognize my laptop, Ipad2 and iphone.  I have earthlink as my internet provider.   I have talked with them, but they could not help.  I think that some of the numerical addresses are messed up.  My computer works fine at work on a different airport extreme- so I know that it is not a problem with my laptop. 

    That is because Apps are tied to the apple id that was used to purchase or download it.  So you will have to use your old apple id and password to update the app.
    You can try deleting the app and then downloading it with your new id - not 100% sure this will work.

  • Black ink cartridge will not work even though new; photosmart 5510 d-all-in-one series

    My printer has suddenly stopped printing properly.  The black ink is no longer printing.  I have tried 2 new cartridges and cleaned the printheads.  Th  black does not come out in the print quality diagnostic nor in any documents that I need to print.  The printer is 2 years old.  Is there anything  I can do to get it to work?

    HI,
    Please follow this document for the issue
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425035&cc=us&dlc=en&lang=en&lc=en&product=506...
    Hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Technology Theme: The reference sample components will not work!

    OK, maybe I am somewhere in left field on this one, but when I read "A pre-built Calendar component JavaServer Faces library. Import this file directly into Java Studio Creator", I take that to mean that I should be able to import it into JSC...WRONG!
    When I try to do so it tells me "Invalid Component Library Package -- extension must be "complib" ".
    So I scan the zip file for .complib...but I didn't find anything with that extension! ARGH!!!
    So does this thing work with JSC Update 7 or not? If it is supposed to, then what am I doing wrong?
    What I am doing now is:
    1) Go to Pallette->Added components
    2) Right click in that area and select "Import Component Library"
    3) Change the Filed of Type to All Files
    4) Select the zip file holding the same I downloaded from SUN.
    That's when the error messge pops up complaining that it doesn't like like the extension (not complib).
    Thanks!

    Hi,
    The Sample Calendar component download has been fixed for Update 7.
    http://developer.sun.com/prodtech/javatools/jscreator/reference/codesamples/samplecomps/calendar.html
    Also, the source is available and also is valid.
    Please read the brief instructions in NOTES.txt
    To build the source, you'll need to use ant
    http://ant.apache.org
    Then , in the build.xml file included in the zip, correct
    the creator.home property setting to point to the installation directory of Creator.
    hth
    John

Maybe you are looking for