Flashplayer 11 installed and enabled but not working

using IE 11 with Windows 7. previous version(s) have worked in the past. However IE version 11 was recently installed and flash player issue started at that time. Maybe related??? Adobe site says installation successful. Went through all related troubleshooting tips and no issues were found.

IE11 has wrought havoc since it was released.
Facebook, Yahoo, YouTube, Pogo... all have reported numerous problems.
Microsoft has recommended enabling Compatibility view for affected sites: http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11 but that has met with about 50% success.

Similar Messages

Savage4: DRI installed and enabled, still not working!

My box has Savage4-based ProSavage 8 onboard video hardware, which I am attempting to enable acceleration for. XOrg comes with 2D drivers for this hardware; however, 3D drivers are not included in XOrg or the Arch default kernel (though the kernel is compiled with DRM), so I had to install Mesa. Bingo, there's my 3D driver.
My xorg.conf seems to be configured right (it bloody well should be since I used hwd!)... But still no DRI according to glxinfo, still lame FPS from glxgears (113-144 FPS for normal-sized window), and still bloody hideous FPS from TuxRacer (~2 FPS).
Any help? I'm pretty sure I'm doing this right... Do I need to compile something into the kernel or something?
My xorg.conf:
# Auto-generated by KNOPPIX mkxf86config
Section "ServerLayout"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
### Uncomment if you don't want to default to DDC:
### Uncomment if you don't want to default to DDC:
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 120.0
Identifier "Monitor0"
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
# The following line is auto-generated by KNOPPIX mkxf86config
# BusID "PCI:1:0:0"
Identifier "Card0"
Driver "savage"
VendorName "All"
BoardName "All"
ChipSet "Savage4"
Card "savage Savage4"
Option "DRI" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group "users"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
What glxinfo says:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x3f 32 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
What glxgears gives me:
622 frames in 5.0 seconds = 124.400 FPS
565 frames in 5.0 seconds = 113.000 FPS
565 frames in 5.0 seconds = 113.000 FPS
678 frames in 5.0 seconds = 135.600 FPS
565 frames in 5.0 seconds = 113.000 FPS
Any help?
Edit: changed "Mode 0660" to back to "0666". Doesn't help a damn thing.
BTW, I'm using the stock Arch kernel (linux-2.6.10-ARCH).

Hi guys, it doesn't work here either, even if I followed the instructions (tried March 15th snapshot). Dmesg gives me these errors when trying to load the DRM module:
kobject_register failed for drm (-17)
[<c031f85b>] kobject_register+0x5b/0x70
[<c01397c1>] mod_sysfs_setup+0x51/0xc0
[<c013adb0>] load_module+0xbc0/0xce0
[<c0152add>] vma_link+0xad/0xf0
[<c013af27>] sys_init_module+0x57/0x240
[<c0103279>] sysenter_past_esp+0x52/0x75
savage: disagrees about version of symbol drm_open
savage: Unknown symbol drm_open
savage: disagrees about version of symbol drm_fasync
savage: Unknown symbol drm_fasync
savage: disagrees about version of symbol drm_poll
savage: Unknown symbol drm_poll
savage: Unknown symbol drm_get_resource_len
savage: disagrees about version of symbol drm_core_get_reg_ofs
savage: Unknown symbol drm_core_get_reg_ofs
savage: Unknown symbol drm_get_dev
savage: disagrees about version of symbol drm_ioctl
savage: Unknown symbol drm_ioctl
savage: disagrees about version of symbol drm_exit
savage: Unknown symbol drm_exit
savage: disagrees about version of symbol drm_core_get_map_ofs
savage: Unknown symbol drm_core_get_map_ofs
savage: disagrees about version of symbol drm_init
savage: Unknown symbol drm_init
savage: Unknown symbol drm_get_resource_start
savage: Unknown symbol drm_cleanup_pci
savage: disagrees about version of symbol drm_mmap
savage: Unknown symbol drm_mmap
savage: Unknown symbol drm_initmap
savage: disagrees about version of symbol drm_core_reclaim_buffers
savage: Unknown symbol drm_core_reclaim_buffers
savage: disagrees about version of symbol drm_release
savage: Unknown symbol drm_release
Any ideas?

Frustrated my computer says flashplayer is installed and enabled but it won't work, any suggestions?

Really frustrated with flashplayer. The latest update won't work. It is installed and enabled but anywhere I go to watch something that uses flashplayer it says I need to install it!

http://forums.adobe.com/thread/1195540

Update to 10.6.8 and HP F2100 and D2400 Printers stopped working. Restored 10.6.7 and printers from Install CD's but not working, Same with scanner

Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
Steve

None of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers.

Page is working ok in chrome and IE but not working in firefox. jquery problem i guess

http://184.170.251.149/raschet-shkafa-kupe
this page is working correctly in chrome and IE but not working in firefox, i cant click and of the dropdown menus(ДСП, доличество дверей). it was working perfectly prior firefox 18. can you please fix the compatibility problem ?

I was referring to the second page in my above post.
I disabled JavaScript as a test after loading the page with JavaScript enabled and that worked.<br />
I also get the selects to open if I right-click instead of left-click the select.<br />
That way the select get selected (shows a focus ring) and after that left-clicking works as well .
This assumes that JavaScript is monitoring the left-click, but that script no longer works properly.
A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Chrome Extension installed and enabled but doesn't do anything

I have been using the Adobe Extension to create PDF from my web pages with Chrome. Suddenly it doesn't work. It is installed and enabled but nothing happens when I select create web page. Any suggestions?Thanks.

I have been using the Adobe Extension to create PDF from my web pages with Chrome. Suddenly it doesn't work. It is installed and enabled but nothing happens when I select create web page. Any suggestions?Thanks.

Camera Raw 5.1 downloaded and unzipped but not working in CS4. Can't open Nikon D90 NEF files.

Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.

update the adobe program that needs cr 4.6+, http://www.adobe.com/downloads/updates/

Itunes was not installed properly.please reinstall itunes..error 7 (windows 14001) what is this.. have tried installing and repairing but nothing works..help please?

Have this error and itunes will not work..very frustrating...anyone no whats wrong?

Google is your friend for this error...

Flash plugin is installed and enabled, but Firefox doesn't recognize content.

I have the latest version of flash player installed and enabled. When I go to Adobe's test page, it recognizes the install and lists the correct version number, but the test animation at the top of the page fails to load properly. Also, the applications handler in Firefox's 'options' menu fails to list any flash compatible file types. On YouTube, I'm met with the video throbber stuck, unmoving, against a black rectangle. Right clicking the video and trying to view the 'settings' dialog does nothing.
I have tried deleting 'pluginreg.dat' and a number of other solutions I've found online, but nothing has made a difference. My other plugins (java, acrobat, etc.) all work fine. Thanks, in advance, for any help.

Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash player '''v15.0.0.189 http://get.adobe.com/flashplayer/'''
'''[https://www.adobe.com/software/flash/about/ Flash Player Test Page]'''
'''[http://www.adobe.com/shockwave/welcome/ Shockwave Test Page]'''
'''[http://helpx.adobe.com/shockwave/kb/troubleshoot-shockwave-player-installation-windows.html Troubleshoot Shockwave Player installation | Windows]'''
'''[http://helpx.adobe.com/shockwave/kb/troubleshoot-shockwave-player-installation-mac.html Troubleshoot Shockwave Player installation | Mac OS]'''
'''[http://helpx.adobe.com/flash-player/kb/video-playback-issues.html Flash Player Help / Video playback issues]'''
fixed first download link as it was linking to Shockwave player and not the proper Flash player. If it says shockwave in end of link then that is not Flash but the shockwave for director or rather shockwave player.

New version X1 freezes and disappears from screen. Re installed 3 times but not working

New version X1 freezes and disappears from screen. Re installed 3 times but still not working

Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If not, download, unzip and run the attached registry script.

OpenGL Enabled, but not working (Photoshop CS4)

I have having a weird problem with Photoshop CS4. First of all, let me give off the specs.
OS: Windows 7 64 bit
Graphics Card: AMD Radeon HD 7570 (Driver Version 8.960.11.1000, with latest Catalyst Control Center)
I use Photoshop CS4 for freelance work, and one of the tools I like to use is the Rotate tool. When I first got my desktop and installed Photoshop, everything worked fine. However, recently I was forced to perform and factory restore on my desktop thanks to a virus.
Today I started working on something and when I tried using the Rotate tool, it was not working (I go that error window saying it wasn't enabled). I checked the OpenGL settings to see it was enabled. Confused, I restarted Photoshop and tried again with no luck.
This turned into a search around the internet to see just what is going on, but the only thing I could find was suggesting updating drivers for my graphics card and Adobe, which I have tried with no success. I have found out that some people were having the same trouble as me, but what makes my case odd is that it was working fine before the factory restore.
Any help would be great.

Because of ATI's plethora of version information I'm not really sure what Catalyst release your 8.960.11.1000 driver comes from, but I do know that Catalyst 12.4 has some problems working with later versions of Photoshop. Perhaps Photoshop CS4 isn't too happy with it either.
The most recent Catalyst release that was known to be good with Photoshop was 12.2 (though it shows up as 12.3 in the status display). It can be found here:
http://support.amd.com/us/gpudownload/windows/previous/Pages/radeonaiw_vista64.aspx
Downgrading drivers is a bit more tricky than upgrading them - you have to fully remove the current ones first, then install the older set.
-Noel

Flash player is installed in Win7 but not working

I am working on a Win7 64-bit system and I can't get flash player to work. I am using Internet explorer 8 32-bit. Looking at the add ons I see Adobe Shockwave but not Flash Player. In the windows\syswow64\macromed\flash I have these files:
flash10o.ock
flashinstall.log
flashplayer.xpt
flashutil10o_activex.dll
flashutil10o_activex.exe
flashutil10o_plugin.exe
install.log
npswf32.dll
I have installed, uninstalled. Used a support page from Adobe "Latest version of Flash Player doesn't display video". Still no luck. I downloaded and installed Firefox 4. Installed Flash Player and it works. I looked and the 'kill-bit' is not installed on this pc.
Whatever you can do to help will be appreciated.

Hi again, Since you have Norton and SAS, there may be a conflict between them.
What version of SAS do you have Installed? Even the Free version has Realtime Protection that would be running at the same time that Norton is. And unless you Disabled both of these when running the MBAM scanner, you may not have received a clean scan from MBAM.
What type of Malware was found and which program found it? Let me know this.
At this time, I would suggest that you Disable Norton & SAS. Then update MBAM and run a full scan, or at least a quick scan.
Close all browser windows before doing this, so there will be no interference from Norton & SAS.
Do that first and then let me know the results of the MBAM scan.
I'm trying to determine what is causing the Shockwave Flash Object not to Install.
Thanks,
eidnolb

Back to my mac - iCloud enabled, but not working

Last year I made very regular use of Back to My Mac. Time and again I had no problems using my Mac Book Pro and connecting to my Mac Pro back home - did this from all over the place.
Then last month, my DSL router died and I had to upgrade.   The Netgear switch I had used stopped letting Back to My Mac work - turned out there was a glitch and I was one of the few who had a working unit, but not that it had tanked I could not get it back. All systems would get an error when trying to enable Back To My Mac instructing me to review my settings, enable UPnp, etc...
So now I have a new Netgear R6300 and my MiniMac, Mac Pro and Mac Book Pro all can have Back to My Mac checked without an error showing up. Can uncheck and re-check and the spinning wheel does it's thing and the box shows properly with no error.   Great - but apparently not really.   All these systems are in the same network, so of course they can see each other from within my network - no need for Back To My Mac at all.
But as soon as I try and connect from outside my network I can't.   The Netgear R6300 provides a guest wireless network (that can't see or share the home network), so I can grab another IP address and effectively be outside my home with the Mac Book Pro.   Again, no error when I look at iCloud - and I can uncheck and recheck the Back to My Mac box and the handshaking necessary seems to be fine - but I do not get my home systems appearing in the Finder Shared list as they once did.
The systems in my house can't see the Mac Book Pro either.
As I have a group of static IP addresses from Centurylink I can use a fireware adapter and directly connect a network cable to the M1000 DSL modem - and directly pull one of my other IP addresses for the Mac Book Pro and have it completely out from under the Netgear R6300.   But the situation is the same - the Mac Pro and Mini Mac both appear to be configuered for Back to My Mac (can check, un-check and recheck without an error), but they can't see the Mac Book Pro.   Likewise the Mac Book Pro appears properly set for Back To My Mac - but it can't see either the Mac Pro or the Mini Mac.
It makes no difference whether I enable the Centurylink M1000 DSL firewall or have it disabled.   UPnP is activated on the Netgear R6300, and if I turn it off I get an error when trying to set up Back to My Mac with any system funneling through the R6300 that the connection can't be made and I should check things like UPnP.    So when it is enabled there certainly seems to be at least some sort of semi proper handshaking going on.
For diagnostic purposes only, I have stretched a really long Cat 6 cable accross the room and plugged the Mac Pro directly into the M1000 DSL too - pulling yet another static IP from my assigned block. Now the Mac Book Pro and the Mac Pro can see each other via Back to My Mac - but neither can see the Mini Mac, and it of coruse can't see either of them.
I am not wedded to Netgear, but I have had lousy luck with Linksys and Asus - the Asus. The Mini Mac is a server (web and email) and Asus would not properly route mail to the Mini Mac and their Tech support was both difficult to reach and unable to explain why, just go try another.   The Linksis EA6500 was dead out of the box, and again Tech support suggested to just go get another one.   Asus was truly horrible to work with, but I would try another Linksis - but I have had flakey history with Belkin and Linksis which is why I went to Netgear.
So I know that the Centurylink M1000 does not appear to be the issue as devices connected directly to it can enjoy Back to My Mac.   I know that the Netgear R6300 appears to be working but clearly there must be something wrong somewhere.
I don't seem to be caught in a double NAT issue, and I don't have extreme firewall issues in play.   Much as I would like and intend to put stiffer rules in place, right now I just want to get thigns working.
Clearly I am missing something. Suggestions - even for a different router know to be working in a small but robust network with cable and wireless would be most welcome.   All three systems are running OS X 10.8.3 - the Mini Mac also running server. Both the Netgear R3600 and the Centurylink M1000 have the latest firmware.
Thanks in advance for your help.

Is the Extreme in bridge or router mode.. most people are finding it has to be in router mode to work although I don't think that is specific in the instructions..
You should not need to access the extreme to get into the Mac though.. do you have a hard disk on the AE you are trying to access??

Flashplayer installed and active but won't run

Hi. I seem to be having the same problem as several others on here: I've got the latest version of Flash installed and active on my Win8.1 system, and it shows as an active add-on in the latest version of Firefox, but it stalls on loading and won't run. This started immediately after the latest Flash update was released: I've tried uninstalling and re-installing.
Thanks.

You're more than welcome to file performance bugs at http://bugbase.adobe.com/. I noticed that the page on adobe.com took a really long time to load for me as well on Chrome, but Adobe.com is super complex, and I think that has something to do with a poorly performing back-end service. Since you're seeing the slow script dialog not loading on the watch page, it's pretty clear that Flash Player is installed and playing content under normal circumstances. The interesting part is that one of those dialogs is talking about JavaScript running on the page, and the other is talking about Flash. It's unclear without debugging the issue whether it's the browser or the plugin; however, as you've noticed, both work fine in Internet Explorer.
It's important to point out that both Adobe and Microsoft made a tremendous effort in tuning the Internet Explorer experience for Windows 8 and higher. The latest versions of IE offer a fast, modern plug-in architecture that efficiently offers defense-in-depth protection against the modern generation of security threats (as opposed to the sandboxing approach that we retrofit to Firefox). Similarly, Google Chrome provides a modern, secure plug-in architecture and invests heavily in making the Flash experience in the browser great. I'm a Firefox fan as well, but the reality is that you might be more satisfied with your experience when using a different browser.
For the crash, I'd be happy to take a look at the crash analysis to see if I can find anything useful.
In Firefox, if you type about:crashes in the address bar, you should get a list of recent crashes.
Click each link to submit it to the Mozilla crash reporting system.
Copy the address from the resulting window into a reply here.

Hardware virtualization enabled but not working in HP Pavilion p6

I've got an HP Pavilion p6 series (Model no. p6-2003es), with an up-to-date v7.15 BIOS, and I'm unable to use hardware virtualization.
I've enabled Virtualization in the BIOS under System Security, pressed F10 and saved the changes as per the usual procedure when modifying BIOS settings. However, when trying to run virtualization software (Virtualbox in this case), I get a warning notice stating that processor supports virtualization, but it's not enabled.
This seems to be the case: the feature is supported, but the BIOS does not seem to change the setting and enable it. I've tested it under 2 different OSs, with the same result:
Under the original Windows 7 64-bit, I've ran the Microsoft HAV Detection Tool, which tells me that hardware virtualization is not enabled.
Under Ubuntu 12.04, I've ran the rdmsr tool, which allowed me to read the AMD MSR (Model Specific Register) bits concerned with virtualization, and confirmed that they are not enabled.
I suspect that this is a BIOS issue (i.e. it's not setting the bits required to enable virtualization), but after a search on the forums it strikes me that no one has reported it yet, so any help, comments or workaround for this issue will be really welcome.
Thanks!

Hi MattNC79,
If you search this forum for the following tags you might find a solution as there are many for virtualization issues.
VT, VTx, VTd, Hyper-v, virtualization
HP internal has indicated the virtualization is not supported consumer level PC. It's up to the individual to make it work, if it is possible, with perhaps the volunteers on this forum as HP has no official presence on this forum.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Flashplayer 11 installed and enabled but not working

Similar Messages

Maybe you are looking for