FlashPlayer 9.0 r 115 executable file don't work, opens a blank screen

Hi,
I'm publishing my projector from flash cs3 (embed flashplayer 9.0 r115).I burnt my cd-rom but it doesn't work.
It opens a blank window, in Windows 7 and Vista.
Not always, I mean ... It works in most of computers I try to execute, but I get this problem in a few cases.
I can't get the solution, please anyone can help me?...
It is a fullscreen projector and uses actionscript 2.0.
Thanks a lot

Ok,
This is normally a setting in a modem or router about DOS or SPI protection.
Turn it Off if you have it.
Also Check Internet Sharing is Off.
Your log suggests that you are using a Airport Base Station of some sort (or one end is)
If it is your end you will not fond DOS or SPI there it will be the modem.
5:01 PM Sunday; November 11, 2007

Similar Messages

I just updated to Adobe Reader 11.0.07 on my Mac 10.6.8 and now the video files don't work. How do I uninstall the update and return to the previous version?

I just updated to Adobe Reader 11.0.07 on my Mac OS version 10.6.8 and now the video files don't work. How do I uninstall the update and return to the previous version?

I received a notice from Chris Campbell at Adobe that stated : "....we are aware that Macs created between 2006 and 2008 are currently running into problems using the latest release of Flash Player (version 13)." My question is will the update of Adobe Reader 11.0.07 cause this problem with Flash Player 13 on my Mac? Sometimes when I try to view streaming video I get sound but no video.
>

Audio files don't work in FCE

I have clips that I want to use in Final Cut Express that have audio in 48 KHz, 16-bit integer mode.
The FCE manual says "16-bit audio: For video capture and output, 16-bit audio is almost always used"
When I import the clips into FCE and place them in my sequence, I get the dreaded red line over the audio, and I can't seem to "render," so essentially, my clips have no sound.
The default audio settings for my sequence are 48 KHz, 32-bit floating point, about which the FCE manual says "Final Cut Express HD mixes the audio in your program internally at 32-bit, floating-point resolution even if your source audio is 16-bit. The result is that all audio calculations are made with higher precision, maximizing the quality of your program’s audio."
But since my audio files don't work in FCE, something is not right, and I don't know how to change it. The only way to change sequence settings is to load presets, none of which give me contol over the audio settings at this level. How do I get my audio files to work?
Thanks,
Rebecca

Ok, so I opened up one of the orignal clips in QT, and clicked on "Export -> Quicktime movie." Under settings, I made sure the compression was DV/DVCPRO NTSC, and the audio was set to 48 KHz, 32-bit floating point. And exported. And then imported the clip into FCE, and it worked! (Even my teacher in my Final Cut class couldn't answer this one for me).
Question is, if all cameras record at 16-bit interger (as the FCE manual says) and FCE requires 32-bit floating point (as it seems to), why doesn't it do the conversion automatically (as the manual suggests, but does seem to actually do)? I guess I don't really need this question answered, since I now have a fix, but I still need to use QT to convert every clip before I can use them in FCE, which is still a pain.
Thanks,

I cannot open reader files (most often but receive a blank screen. If I email to another macbook air it opens just fine. I downloaded latest version.

I cannot open reader files (most often but receive a blank screen. If I email to another macbook air it opens just fine. I downloaded latest version.

Hi TheMom1999,
Do you mean that you are unable to open the pdf files via Reader?
Which OS are you using? Have you updated Reader o v. 11.0.7 and checked?
Was it working fine for you before?
Regards,
Rave

My excel report is not working in executable file ,however,it works well in vi

Hi all ,
Could any one please help me in getting the reason behind the executable file not working for excel report generation,however I can get the same function without any problem in main vi.
I am attaching my code and executable file also ,please have a look into it and let me know where I am wrong.
Thanks & Regards !
sarita
Message Edited by MindPower on 10-24-2007 01:40 AM
Message Edited by MindPower on 10-24-2007 01:43 AM
Attachments:
test datalog.vi ‏264 KB
test datalog-NEW.zip ‏1020 KB

I can't open the vi in the moment. But by your description I think that I know the solution.
When you build the executable you've to add dinammically the vi's from report generator that aren't in your main vi hierarchy. So, you've to open the vi's and find those that are open trough "open vi reference" and add them dinamicaly.
And don't know if these tips are enough.
From NI Zvezdana S.
"When you use the Report Generation Toolkit to build a stand-alone application with the Application Builder, you must add _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs. These two VIs contain subVIs that are called dynamically by the high-level Report Generation VIs. I believe that if you grab these VIs from the (desired office version part of the) installation CD instead of from the development machine, then everything should work. "
Software developer
www.mcm-electronics.com
PS: Don't forget to rate a good anwser ; )
Currently using Labview 2011
PORTUGAL

Unix Executable files - need help to open

Hi folks, sorry i have been looking through previous discussions re these type of files but its all well and truley above me. I have been given a video file and when copied to 'finder' it showed it was a unix executable file and it opened Terminal, again made no sense to me. I was informed to download MPEG Streamclip with no luck and the jargon I have read is goobledegook to me, sorry. Can anyone help pls in simple terms????

One thing you could try is to drop one of the files on to the vlc video player. If the file is truely a video file then odds are vlc will figure that out and be able to play it. It also has a menu to tell you info about the file so you could figure out what kind of file it actually is.
In the case of windows .wmv files you should add Flip4Mac. That would allow you to play those with QuickTime.
Similarly add Perian to add more power to QuickTime so that it too could possibly handle those files like vlc.

AppleWorks 6.0 Files Listed As Unix Executable Files. Unable To Open.

A client of mine backed up a number of AppleWorks 5 & 6 files last week on a PowerMac w/ OS X 10.3. I reformatted the HD, upgraded the OS to 10.4 and attempted to reinstall AppleWorks 6.0. It would not allow installation. So, I installed OS 9 Classic. Still would not allow me to install AppleWorks. Then, I installed iWork '08, having read that it would open AppleWorks files. iWork would only open a hand full of the files. The remaining 90% of the files are listed as "Unix Executable" files.
Have the files been corrupted in the move?
Any ideas on how to open/recover these files?
Thanks,
stc

If one device used during the process was not an HFS one, the AppleWorks documents may have lost their resourceFork.
Are you sure that the files are named with the name extension ".cwk" which is quite required under Mac OS X?
Then, I installed iWork '08, having read that it would open AppleWorks files.
This is right and wrong.
Iwork components are able to work this way:
Pages may open AppleWorks 6 WP document, not the AW5 ones
Numbers may open AppleWorks 6 SS document, not the AW5 ones
Keynote may open AppleWorks 6 Presentation document, not the AW5 ones
Nothing may open the DB, Paint and Draw AW documents.
There is no reason that you can't install AppleWorks on a machine running 10.4.
I installed AppleWorks 6.0.4 last week on a machine running 10.4.11.
So, at this time it seems that the main problem is to understand why you are unable to reinstall AppleWorks 6.
If you wish to know if the documents are in good health, you may attach one to a mail and send it to my mailbox.
Click my blueName to get my address.
Yvan KOENIG (from FRANCE lundi 25 août 2008 19:12:51)

Unix Executable file - How do I open

I have a Software DVD ( Route 66 Road Planner ) and want to install onto my New Macbook, problem is I can't. I know it is an "Unix Executable file" ( Apple - i keys give me that information ) I do know that on my old iMac G4 it opens no problem using VISE and I'm using 10.4.10, any reason why I can't open this on my Macbook ?
Can I open it ? If so how ?
Thanks to all.
Steve

It probably requires X11. X11 is not installed by default in OS X. It is on the install cds though as an optional install.

Word documents appear as "unix executable files" and cannot be opened

Hi: I am running 10.5.5 on my Intel Imac. The problem is that many old MS Word documents have suddenly flipped into documents with no file extension, but which are identified in the Preview window as "unix executable files."
I've had this happen before, and all I had to do was add the .doc extension for them to become Word documents again. This time there is nothing I can do to change them over. I have tried opening them from Word, from Pages, from Text Edit, with no results. (I have also used all the possibilities available from Word as well).
There doesn't seem to be any pattern -- random documents in the same folder, created at the same time and modified at the same time, appear as unix files, while the others seem fine. Any ideas?
<Post Relocated by Moderator>

This is the iWeb forum. You should post your question in the Leopard forum. But I'll give a try at a possible solution:
1 - check the Finder preferences and make sure you have the option to show file extensions checked.
2 - select one of the Work files, type Command+i and in the Info window go to the Open With menu and select Word as the default application. Then click on the Apply to All... button.
OT

Illustrator CC 17.1 don't works properly on Full screen mode

Hi
I'm trying Illustrator CC 17.1 under Mac OS X 1.8.5 with Mac Pro with two monitors Apple Cinema and NVIDIA Quadro FX 5600 1536 MB Video Card.
Can't use it on Full Screen Mode because the hover effect use it to show tools and panels don't works o both sides and on both monitors.
Seems to be Illustrator CC don't support two monitors under full screen mode on Mac OS X.
Any suggestion?
Regards,
Tom

Thanks for your reply.
Mavericks is very new. I will wait a more reliable update before upgrading.
By the way I think this issue must be resolve on Illustrator CC.
Regards,
Tom

Executable file won't work in terminal when I'm in it's folder

I don't get it, I thought I could just go to a folder then I can execute an excutable file in that folder by simply typing it. For some reason terminal wants me to put in the entire path of the file to execute it even if I'm in the folder. Clearly this isn't DOS . How do I do this? ./<file> ? Is that correct? Thanks.

Your PATH environment variable tells the shell where to look for commands you type, if there is not path information.
If you want the shell to look in the current working directory, your PATH environment variable must have a period as one of the entries.
export PATH=".:$PATH"
would make your shell look in the current working directory for the command you are entering before looking in any of the other PATH directory.
NOTE: This can be considered insecure, as if you are on a multi-user system, and then are in some directory where another user has put a file such as 'ls' that you execute instead of the /bin/ls, then you could be tricked into doing something the other user wants.
Or you can invoke commands in any random directory by supplying ./ in front of the file name, or providing the full path.

Executable file on CD not opening

Hi guys,
I'm a Captivate beginner here...so apology if this sounds really stupid to you...
First time I encountered this problem with executables on CDs. Error message says:
FlashPlayer
Cannot open file C:\DOCUME~1\.....\.tmp
I published the executable selecting FlashPlayer7...my client has FlashPlayer 10 so it must be something else?
Thanks in advance for your help!!!

Hi there
Does this happen on only one PC or is it all PCs you try it on?
If it only happens on one PC, perhaps the temp folder is full?
I believe that EXE format extracts to the temporary folder before running the content.
You might wish to try clearing the temp folder and trying again.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Keynote 3.0.2 (iWork '06) Files Don't Work in Keynote 4.0 (iDon'tWork '08)

I just got iWork ’08 yesterday, and tried to use a slideshow created in Keynote 3.0.2 with the new Keynote 4.0, and nothing works. The original file is an interactive slideshow of my office work portfolio, and has an initial slide with 40 project photos that are hyperlinked to smaller automatically running slideshows of the specific projects represented by those photos. Within those smaller slideshows are embedded QuickTime movies and separate audio files that often play simultaneously as soundtracks. Timing of the start and end of movies and audio files is usually critical to the sequence of slides. Once the specific project slide show is complete, it automatically returns to the opening hyperlinked slide, so another project show can be selected and played. It all works perfectly in Keynote 3.0.2.
However almost nothing works in Keynote 4.0. The initial hyperlinked photos link to the wrong projects (I have found that it seems to be the next project from whatever the selected slide in the navigator view happens to be, rather than the correct hyper linked project) movies embedded in the automatically running slideshows don’t play, audio files either don’t play or start at the wrong time. Auto transitions between slides don’t always occur so the show sometimes stops (thought the audio sometimes keeps running) and on and on. There are several hundred slides in the whole show, and I haven’t had time to inspect individual transitions, timings etc., and would hate to think of the time necessary to redo the entire show that way.
I’m by no means an expert in Keynote, so I don’t know if there is some version update conversion trick that I’m missing. I sometimes distribute this show on disk to clients who have Keynote installed on their computers, and I wouldn’t want them trying to run it with Keynote 4.0.
Can anyone shed some light on this situation?
Also in a more general sense, I wish that Apple would create a freeware Keynote Player that could be distributed with slideshows and which would play them as they were intended to be played. Kind of like Adobe Reader distributes for pdf files. None of the Keynote exporting options, including html, work for the kind of show I have created.
Thanks very much.
P.S. I just tried the trick of setting the KN preference to “Allow Exposé, Dashboard and Others to Use the Screen”, and that fixed the playability of QuickTime movies, but audio file timings are still off, skips occur in the audio files and the hyperlinks still go to the next sequential slide rather than the proper link.

What version of the OS are you running? Also, in some cases, running the same presentation on two different computers will yield a change in carefully timed presentations. This is because audio and video aren't "locked" and will drift depending on the speed of the computer/OS. Because there were some changes made to how Keynote handles movies, this MIGHT have an effect on some of your timings there, but I don't think this would cause the widespread mislinking you're seeing.
zootooz wrote:
I wish that Apple would create a freeware Keynote Player...
If you're displaying on a Mac running fairly recent OS, anyone can download and install the iWork Trial. While it will eventually time out, this trial version can still run Keynote presentations just like the full version can. You just can't save any changes to the presentation.
Message was edited by: Kyn Drake

Links to external files don't work

Hello
Using RH 8.02 and converting linked Word docs (Word 2002) to WebHelp. These are policies and procedures that reference external documents.
In my Word doc I have a hyperlink to an external document. This doc is on a network server. In Word I added the hyperlink and it appeared as a relative path, such as ../RelatedDocs/RelDoc1.doc.
The referenced file is an external file, and I don't want to add it to RH because it may be updated; I just want to link to it so that a user gets the latest version.
When I update the HTML files in RH I see this in my HTML file:
<a href="file:////terminus/avbase_techsupport/av-base documents/supportmaster/documentationshare/relateddocs/reldoc1.doc">Related Doc 1</a>
This is the correct absolute path for the referenced file. Note the file://// prefix, with four forward slashes.
When I generate WebHelp, the link doesn't work. Nothing happens.
I tried the following:
1. Copied the whole path into my Windows Start > Run box and hit Enter. Nothing happens.
2. Removed two of the forward slashes and copied it again into the Run box. Now the file opens in Word.
I also tried removing the hyperlinks from the Word docs and adding them through RH instead. Same result.
Why does RH add four forward slashes to the prefix? What can I do to get these external links working?
Thanks for your help.
Roger Shuttleworth
London, Canada

Hello Peter
I apologize for taking so long to respond. I just received a new computer with Vista and have had to set it up. Here is what happens:
1. In Word, I have a doc policy1.doc that contains a hyperlink to reldoc1.doc. The two files are in different folders. When I insert the link, Word shows it as a relative path ../RelatedDocs/reldoc1.doc. When I hover over it in the Word doc, it shows as an absolute path starting with file:///\\theserver, etc.
2. My RH project includes policy1.doc but not reldoc1.doc. I update policy1.doc in RH. In the HTML topic file (HTML view) the link is:
<a href="file:////theserver/path/reldoc1.doc">Link text</a>. Note the four forward slashes.
3. I save all project files and generate WebHelp.
4. In the resultant web page (in Firefox), I click the link in policy1 and nothing happens. The status bar shows the path the same as above.
5. I navigate to the output !SSL! and find the index page, and open it in Internet Explorer 8. The link shows in the status bar as file://theserver/path/reldoc1.doc, and when clicked IE opens the Word doc.
So in this case Firefox doesn't open the link but IE does.
Here is another scenario:
1. I have no links in myWord docs.
2. I generate topic files in RH using the linked Word docs.
3. In RH, in the HTML file for policy1 (policy1.htm) I add a link to reldoc1.doc. I choose the file protocol. RH asks me if I want to copy the doc into the project folder, and I say No.
4. I check the HTML for policy1.htm and see that it has the link as follows:
<a href="file://J:/Documents/rest of folder path/RelDoc1.doc">Related Doc 1</a>
(Going to Hyperlink Properties shows the same path.) Note the two forward slashes.
5. I save all files in the project and click Generate Primary Layout (which is WebHelp). A dialog asks if I want to update <some file or other, but I can't see which one because that darned dialog box is too small, but I expect it's policy1.htm>.
6. I say No. The output is generated and I view it in Firefox. The link works and has a path in the status bar as:
<a href="file://J:/Documents/rest of folder path/RelDoc1.doc">Related Doc 1</a>
Note the three forward slashes.
7. I view the index.htm file in IE and it works.
As a variant of the above, instead of saying No when asked if I want to update the file, I say Yes.
1.The HTML of policy1.htm now shows the link as:
<a href="file:////server/rest of path/reldoc1.doc">Related Doc 1</a>
Note the four forward slashes again.
2. The link is as shown in the status bar of Firefox is now set to:
<a href="file:////server/rest of path/reldoc1.doc">Related Doc 1</a>
It doesn't work.
2. The same link shown in IE status bar has two forward slashes (even though the source has four), and it works.
So in answer to your question, the link definitely changes within RH. The two browsers deal with things differently, with IE seeing a file://// link as file://.
Incidentally, I did some research on the file:// protocol and came up with:
http://kb.mozillazine.org/Firefox_:_Issues_:_Links_to_Local_Pages_Don%27t_Work
The answer seems to be:
1. Add the links within RH.
2. Don't update when generating output.
3. If possible, get users to use IE instead of FF.
Either way, it's not very satisfactory for my purposes.
Regards,
Roger

Cineform files don't work well on Mavericks

Quicktime converts a CineForm file before playback in Mavericks. Why is that? Before Mavericks it worked just fine. Even previewing in a Finder-window isn't possible anymore. Anybody out there who knows why Apple has done this? Is there a workarround?

Were all three 8330 devices you had having this same issue?
Were they all gotten from the same store?
I'd assume that store has a batch of bad devices. Exchange it from different location from a different batch.
Or, better yet, for your troubles, ask VZW to upgrade you to a 9630 device
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

FlashPlayer 9.0 r 115 executable file don't work, opens a blank screen

Similar Messages

Maybe you are looking for