Flashplayer does no longer work after reboot

Hello and much apreciated if you can look into this.
I need to install flasplayer everyday to get it working.
Which is very odd, because in the folder of sys32 macromed and syswow64 macromed all the files are there.
But for some unknown reason they dont see to work.
i tried setting permission for the OCX files in both folders but that had no effect either
If you could help me much apreciated, since reinstalling everyday can get quite annoying.
Yours sincerely,
Diamondcore

How do i know if the downloaded version op Flash player is the 32 bit?
The one i get from downloading from the website is called (install_flashplayer11x32_mssd_aih)
I assume this is the 32 bit version, however ill wait till i get confirmation
Thanks for helping me this far,

Similar Messages

[SOLVED] Default audio device no longer works after reboot

After today's reboot, the audio device no longer works. E.g., VLC says:
Audio output failed:
The audio device "default" could not be used:
No such file or directory.
This is the console log:
[0x1394138] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
[0x7fac180069c8] pulse audio output error: PulseAudio server connection failure: Connection refused
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[0x7fac180069c8] alsa audio output error: cannot open ALSA device "default": No such file or directory
[0x7fac180069c8] jack audio output error: failed to connect to JACK server
[0x7fac180069c8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7fac180069c8] main audio output error: no suitable audio output module
[0x7fac40fa4db8] main decoder error: failed to create audio output
[0x7fac180069c8] pulse audio output error: PulseAudio server connection failure: Connection refused
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[0x7fac180069c8] alsa audio output error: cannot open ALSA device "default": No such file or directory
[0x7fac180069c8] jack audio output error: failed to connect to JACK server
[0x7fac180069c8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7fac180069c8] main audio output error: no suitable audio output module
[0x7fac41055118] main decoder error: failed to create audio output
The strange thing is that the sound card does in fact work; e.g. the sound test for "HDA Intel PCH", the first entry in my KDE Audio Settings, works. But the entry "default" does not and I suppose that is also the device that VLC is complaining about.
I've tried blacklisting the HDMI driver and switched to the other audio output modules in VLC. I've also checked I'm still member of the "audio" group.
Edit:
P.S. Solved this myself. I had a USB-to-MIDI adapter cable plugged in during boot, which seems to have been causing these problems. I suppose systemd thought it was a USB sound card? I was wondering why dmesg said something about USB sound when the computer doesn't have any USB sound devices. Hardware detection epic fail. Although I guess the cable counts as a MIDI device at least, so in a way it's correct.
So it looks like I'll always have to unplug the MIDI cable before rebooting.
Last edited by Morn (2012-11-23 19:24:00)

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

LMS 4.0 no longer working after reboot

I have LMS v4.0 installed and was it working fine (Windows Server 2008R2 Std).
However, I had call to reboot the physical server last week (it had been up for over 6 months) and I am now having problems with most options under the Inventory menu.
I have attached screenshots of the errors I am getting and the end of the DCRServer.log file which indicates that the DCR server has started ok.
I have disabled the DHCP Client service as I saw in another post that this has been known to cause the issue I am seeing, but that has not made any difference.
I have exhausted everything I can think of and am hoping that someone on here can give me some advice or ideas as to where to look next.
Thanks
Steve

Do all the 'connection refused' lines in stdout.log mean anything....
=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:37
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:38
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:39
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:40
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:41
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:42
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:43
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:44
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:45
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:46
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:47
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:48
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:49
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:50
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:51
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:52

After I unplug headphones, the speakers no longer work until rebooted. Anyone else experience this? Also had the same issue on the Droid Razr Maxx.

After I unplug headphones, the speakers no longer work until rebooted. Anyone else experience this? Also had the same issue on the Droid Razr Maxx.

Ahh. We can still help find the culprit, TeaParty14. Do you have any 3rd party applications installed to play your music? Are you able to hear any audio if you plug the headphones back into the phone instead of rebooting? Any audio for calls through the phone direct or through speakerphone?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

HT6114 My double clicks no longer work after doing this update. What happened?

Double clicks in iPhoto no longer work after doing the update. Trying to troubleshoot, but feeling dense in that I can't get this thing to work. Any suggestions, please?

Try this thread > https://discussions.apple.com/message/23317566#23317566

BlackBerry Classic front camera no longer works after update

The front camera on my BlackBerry Classic no longer works after the 10.3 update. The BBM video chat does not work either - error message, another application is using the camera. I tried rebooting and a factory reset and the problem still persists. Please help.

Hi,
the Classic was shipped already with 10.3
What 10.3 version do you mean exactly?
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

Epson printer driver no longer working after 10.4.11 update

It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
Wolfgang

I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

[SOLVED] Postgis no longer working after upgrade of postgresql

Dear all,
after yesterdays upgrade of postgresql-server and libs to 9.0.1 the postgis package does no longer work. When trying to import postgis.sql (version 1.5) it always complains about wrong libraries version:
psql:/usr/share/postgresql/contrib/postgis-1.5/postgis.sql:59: FEHLER: inkompatible Bibliothek »/usr/lib/postgresql/postgis-1.5.so«: Version stimmt nicht überein
I have double checked on postgresql and postgis documents that the versions should be compatible:
postgresql 9.0.1-2
postgresql-libs 9.0.1-2
postgis 1.5.1-1
For all databases dump and restore was fine, except for my gis databases. So upgrade from 8.4.4 to 9.0.1 worked in general.
Any ideas?
Last edited by Wauzenplauz (2010-10-31 14:46:20)

"Unfortunately" I did not have enough time to give it a try and rebuild the package.
So today I found that there is already a new version of postgis available which works perfectly fine!

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

Script no longer works after Upgrade to 10.4.6

The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
Anyone else having Applescript problems with 10.4.6?
--Bob
tell application "Finder"
activate
set fname to selection as string
if fname contains "0." then
move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "1." then
move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "2." then
move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "3." then
move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "4." then
move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "5." then
move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "6." then
move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "7." then
move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "8." then
move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "9." then
move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end tell

I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
Jeff Johnson
Dual 1.2 GHz Mac OS X (10.4.6)
Dual 1.2 GHz

Apogee Jam No longer working after 1.1 update?

My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
Specifically what happens is:
1. I open the garageband app
2. I select the guitar amp
3. I plug the Jam chord into Ipad (guitar is already connected to cord)
4. Jam light goes green, blue, bright green then green
When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
I've tried plugging my guitar in first, then starting garageband, no difference in results.
I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
Outside the garageband app, the ipad does recognize the Jam in settings, general.
What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
Message was edited by: Rickd3333
Message was edited by: Rickd3333

Hyperlinks no longer work after I view photos

I have created a website, and for the particular page I used the preset photo gallery option. I created a text hyperlink at the bottom of the page and it works as I want it to except after I click on any photo in the album. Once I click on the photo, I click on "Back to Album" and go to test the link. There is no colour change, no change of my cursor, or any other change that is supposed to happen regarding a hyperlink. The hyperlinks at the top of the page, linking to the other pages of the website, work without a hitch. Also, the hyperlink is a "Back to top" type of link, it links back to the same page. Any help is greatly appreciated!
Message was edited by: Croydon Enders

Jerrold,
Sorry was off for some time.
This is one of the formulas that does no longer work:
SUMIFS(BNP Paribas::$B$2:$B$267,BNP Paribas::$A$2:$A$267,B4,BNP Paribas::$A$2:$A$267,C4,BNP Paribas::$C$2:$C$267,"=Amexco")
In B4 and C4 I setting a period condition:
>=10/1/2013
<11/1/2013
Column B in the "BNP Paribas" sheet contains the amount of the operation the formula is supposed to search, A is the first search criteria concerned with the date range given above, whereas C contains the label I seeking a match for.
Date
Montant
Transaction
Oct 3, 2013
-€ 2'519.68
Pristina
Oct 1, 2013
-€ 1'840.85
Amexco
Oct 1, 2013
€ 30.02
Rmb frais médicaux
Sep 28, 2013
-€ 110.16
Bruxelles
Sep 29, 2013
-€ 600.00
Pristina
Sep 30, 2013
€ 170.10
Rmb frais médicaux
Sep 30, 2013
€ 196.83
Rmb frais médicaux
As far as I can figure out, the syntax is correct. Moreover, this used to work with a problem before the upgrade.
Let me know if there is anything I miss.
Best,
Alain

Links no longer work after signing document

Links no longer work after signing document - I have updated to latest version and run installation repair, is this a problem or is it supposed to do that?

Hi;
This question would be best asked in the Acrobat signatures Forums, it is related to using Adobe Acrobat/Reader and does not have anything to do with the online service, Adobe Fill & Sign. Someone should be able to answer your question here: https://forums.adobe.com/community/acrobat/security_%26_digital_signatures
Thanks,
Josh

Syncing with iPad mini does no longer work since latest update of iTunes

Syncing with iPad mini does no longer work since latest update of iTunes and iPad mini

Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy

[solved] KDE 4.11 Terminal does no longer work

After updating to KDE 4.11 (among other packages) the terminal/console does no longer work. It's still loading, but basically I can only see a blank and that's it.
I already moved the .kde4 folter because that has lead to problems in the past when updating to new version of KDE 4 but that didn't do it.
Any ideas appreciated, thanks!
Last edited by versus (2013-09-04 21:58:21)

https://bbs.archlinux.org/viewtopic.php?id=168974 ?

Flashplayer does no longer work after reboot

Similar Messages

Maybe you are looking for