Flashplayer plugin installs but doesn't seem to run. Windows 7 X 64 - Firefox 28 - Flashplayer 13

Due to a power problem I had to reinstall Windows 7 X 64 so this is a clean install only a few days old. I installed Firefox 28 as administrator and recovered my bookmarks from the mirrored disk which had undamaged files but a non-repairable operating system. I installed several plugins which had heretofore worked properly including the Flash-player plugin. This is the file name of the install script I downloaded from the Adobe download site: install_flashplayer13x32_mssd_aaa_aih.exe. That tells me it is the 32 bit version so it should be the right one.
Everything works but the Flash-player. All the plugins had been installed as administrator. No glitches or anything unusual happened during the install. Everything seemed to work OK until I visited YouTube and it told me I needed to install Flash-player. Facebook doesn't like my Firefox browser for the same reason.
I have gone through the forums and the install procedures (removed Firefox completely from the system & re-installed it according to the instructions) and have no solution so far. It had been working before the power problems caused the operating system crash but I do not remember the Firefox version or the Flash-player versions I had been using.
Any help you can give would be appreciated. I am missing something but so far haven't discovered what it is.
Thanks...
lefty2c9

Your system details shows that you don't have any version of Flash installed. The one you "installed"(''install_flashplayer13x32_mssd_aaa_aih.exe'') I don't know where that is from.<br>
You can install the correct version below:
*http://get.adobe.com/flashplayer/

Similar Messages

  • [Solved] Gimp Refocus plugin installs but doesn't run

    Hello,
    I have just installed the gimp-refocus package (not the refocus-it version), it installs just fine with pacman, but when starting gimp from the command line I see the following error:
    (gimp:3412): LibGimpBase-WARNING **: gimp: gimp_wire_read(): error
    /home/drtebi/.gimp-2.8/plug-ins/refocus: error while loading shared libraries: libblas.so.3: cannot open shared object file: No such file or directory
    As a result, the refocus plugin does not show up anywhere.
    Can anybody give me a clue as to what is missing?
    I am running Arch Linux x86_64 with a pacman -Suy of today.
    Last edited by drtebi (2013-05-05 23:20:17)

    Solved...
    It turned out that lapack and blas were not installed.
    I think the package maintainer should be notified about this, but I am not sure how this is done (I am fairly new in the Arch Linux world). I am happy to report this if someone tells me how to

  • My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min.  Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

    My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min.  Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.  Will a hard restart wipe all that out?

    Agree with Richard:
    -Your device needs both the CR and LF. To accomplish this:
    option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
    option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
    Details can be seen in this link:
    http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
    "Adding Termination Characters to VISA Serial Writes in LabVIEW"
    Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
    If someone find a working link please post it.
    Regards

  • Can negative B&W image be converted to positive, done this on elements previously by inverting but doesn't seem to work same way in lightroom ?

    Can negative B&W image be converted to positive, done this on elements previously by inverting but doesn't seem to work same way in lightroom ?

    You should be able to invert in Lightroom. But choose the point curve rather than the region curve. If the negative is film you might get better results from scanning.

  • Hello, I've installed Lion but now it says I can't use the Cloud as I need the Apple ID Password to use Back to My Mac. I've obtained several new Apple ID passwords which work ok on my phone but doesn't seem to be the password it's looking for?

    Hello, I've installed Lion but now it says I can't use the Cloud as I need the Apple ID Password to use Back to My Mac. I've obtained several new Apple ID passwords which work ok on my phone but doesn't seem to be the password it's looking for.Does anyone know what's needed please ??

    It's probably looking for the Apple ID & Password you used to purchase Lion, or ML as the case may be.
    Thse are the Mountain Lion forums, is that what you meant?

  • HT1222 Just bought a ipad mini with retina. On my settings page its showing ios7.0.4 software update. "Estimating time remainin..." but doesn't seem to complete update. This message has been showing since last evening. How can I end or complete this opera

    I just bought an ipad mini with retina display. On my settings page it shows an update occurring for ios.7.0.4 with the message "Estimating time remaining..."
    This update and message appeared last evening but doesn't seem to complete. It also says "downloading", but nothing is happening.
    How can I complete the download or eliminate it?

    If it's slow on startup it would be extensions loading or LaunchDaemons starting up. 
    You should have a look in:
    /Library/LaunchDaemons
    /Library/Extensions
    You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. 

  • My itouch seems to be unresponsive after it turns on. It says slide to unlock, but doesn't seem to recognize any touch. I slide my finger and nothing happens.

    My itouch seems to be unresponsive after it turns on. It says slide to unlock, but doesn't seem to recognize any touch. I slide my finger and nothing happens.

    Try this...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

  • I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8?

    I have a macbook pro running snow leopard. Just recently I cannot view youtube videos and other online videos. I recently updated my flashplayer plugin and I believe that is the problem. Is the latest flashplayer plugin compatible with 10.6.8? If this is so, I need to find an older flash player plugin to reinstall. I do not want to upgrade from 10.6.8 at this time because I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.

    rayvonr wrote:
    ...I have 18 yrs. worth of financial records on Quicken that I have read will not work with Lion and I've read bad things about running music programs on Maverick.
    1)  Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) is a full featured app that can be downloaded from Intuit for $15 and will work with your data file if you are using Quicken 2005, 2006 or 2007 (if you version is earlier, let me know for more instructions on easy conversion):
    http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
    2) Partition your hard drive, or add an external hard drive and install Mavericks there and "dual-boot" to operate your music programs in Snow Leopard and experiment with them in Mavericks.
    DO NOT install Mavericks over Snow Leopard!

  • Archlinux on Microsoft Virtual Server - installs but doesn't boot

    Hi all,
    I'm trying to sneak Arch into our organization, but as we're very Windows-focussed it may take some time. I thought I would be able to install it as a virtual machine on our Virtual Server, but I haven't had any luck.
    The system seemed to install fine, but when I restart the machine and take out the virtual CD it just sits there with a blank screen, but using 97% CPU.
    Here's how I installed the system:
    Physical machine: Core II Duo 2GHz running Windows Vista 32-bit, with 2GB memory and a 120GB IDE drive.
    1) Setup a virtual machine - it has 256MB memory, and a 100GB dynamically-expanding IDE virtual hard disk.
    2) Attached the Don't Panic 2007.08 BASE ISO to the Virtual Machine, and started her up.
    3) Started the installer with arch ide-legacy. This is because I've run through this install a few times now and without this option it complains that it can't read from /dev/null a lot and that it has trouble writing to VHD.
    4) Did an auto-prepare and selected all of the defaults to partition the virtual hard disk.
    5) Selected all of the base packages and installed them.
    6) Did the "configure system", and left everything as the defaults except setting the root password.
    7) Installed the kernel, again leaving the defaults in the config file.
    8) Installed the bootloader. Last time I used GRUB, but it sat there saying it was installing for over 2 hours. This time I tried LILO and it installed in less than a few seconds.
    After all that was done I exited the installer and did a reboot. Now it sits at 97% CPU usage constantly and shows nothing but a blank screen. Using ALT+F1-F5 shows nothing.
    Microsoft Virtual Server has support for the Red Hat and other distributions so I would have expected ArchLinux to work. Has anyone else had success in getting Arch to run on Virtual Server? And is there anything I did wrong in my installation?
    Cheers,
    Paul

    Well, according to this virtual pc 2004 supports archlinux 0.7.1 and 0.7.2 .
    They claim virtual server 2005 uses the same core as virtual pc 2004 , so it should work.
    Try installing with one of the previous isos, see ftp://ftp.archlinux.org/iso .

  • Creative Cloud Update downloads, installs but doesn't work?

    Every time I launch my computer (Mac, latest OS), I see there are 9 updates available to download for Adobe CC. Every time I update a single app or everything, it downloads, installs but nothing is actually done. When I get info on apps. everything still shows as 12.0 as if it has not been updated. When I restart the computer again, i get the message that there are still 9 updates available to download. This is an endless cycle and no matter how many times I "Update All", it will continue to download, install but nothing actually gets updated.
    I've fixed disk permissions, deleted preferences and allowed read/write access to all the Adobe folders and it's still not working.
    Thanks.

    Hi Motionlab_AU,
    Please navigate to ~/Library/Application Support/Adobe/ AAMUpdater/1.0 and rename to 1.0.old. Launch CC desktop and try updating again. (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html)
    Regards,
    Romit Sinha

  • Serial number installs, but doesn't register

    Just purchased CS6 today from an online merchant. Downloaded CS6, used the serial number they provided, and it installed properly.
    Went to adobe.com to register with my Adobe ID, and get that it is in invalid serial number. Chat with Adobe support, they say it is a volume serial number, and can't be registered to my Adobe ID.
    Chat with the online merchant, and they say it is issued through Adobe's TLP (transactional licensing program), and is a valid, registered serial number.
    Can anyone shed any light on this?
    Part of my concern is with the upcoming Lightroom/Photoshop CC offer, I'm probably going to need to prove to Adobe that I own Photoshop CS6, and I'm not sure how I am going to do that. Thanks.

    I talked to two tiers of Adobe support, second tier said they couldn't do anything, but also couldn't tell me if it was a legal license or not.
    Response from the vendor was they are using Adobe's TLP, and issuing legal licenses.
    Adobe shop is still selling PS CS6 at full retail.
    Really feels like Adobe direct sales, indirect sales, licensing, support and web registration aren't talking to each other, and there isn't a common set of rules across them.
    You're right, I'll probably have to wait until the LR/PS deal goes live Tuesday, and use that to get some resolution from all the parties. But doesn't leave a very good customer experience. (Actually, didn't mention the infinite loop on the web page from trying to do "Complete/Update Adobe ID", the fact that Adobe's download page doesn't work with IE, or that the requested email to [email protected] got an "out of office" auto response.)
    Message was edited by: ericbergan

  • Extras notes --- iPod works fine in iTunes, but doesn't show up in Windows

    Hi all!
    Gotta wierd situation.
    My iPod works fine in iTunes.
    I have had 'Enable for Disk Use' enabled for a long time. However, my iPod doesn't show up under My Computer on WinXP.
    I'd like to add some new Notes and remove some old ones, but you have to do that thru Windows, not thru iTunes.
    Any ideas how to fix this problem?

    hi marky!
    i noticed one thing. the iPod is formated as FAT32, but i have my HD in NTFS. could this be related?
    no, that one's normal. we need to leave her as FAT32. see:
    iPod no longer plays music after formatting or partitioning the hard disk
    hmmmmm. it's like the "enable disk use" setting is just refusing to stick for you.
    but maybe we've got a window of oppportunity while it's doing that initial sync. the rules seem to be different for you then.
    maybe try switching enable disk use off. then eject her, and plug her back in again (while you've got itunes already running).
    the second she shows up in the itunes sourcelist, try diving into the preferences tab, and re-enabling disk use.
    (i checked, and it's possible for me to do this with attractive beast ... hoping here that doing the "enable disk use" under these circumstances might get it to stick for you.)
    love, b

  • My java plugin is "there" but doesn't seem to be allowing. I checked it in the "add-ons Manager" and it's enabled so what's up?

    using firefox 4.0.1 and cannot access java plugins

    Oracle has a Java test page you could use to make sure it is enabled (note that it takes 10-20 seconds to start up the first time):
    http://www.java.com/en/download/testjava.jsp
    If that works but you are having problems with a particular site, could you provide more information?
    Note that ''JavaScript'' is a different beast than a Java applet. JavaScript is interpreted by Firefox directly and can be managed using options and the NoScript add-on.

  • FlashPlayer update downloads and installs but doesn't work!

    WIN 7 64bit . . . followed the instructions -- downloaded Player 11 -- still can't get most videos from YouTube or Facebook to run,  Still get the update notice or I get a black box with a no plarking symbol in the upper left . . . what's up . . . how can I make it work?  I got a successful download and a message indicating it's installed.

    Assuming IE9, see
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Update Camera RAW in PSE 8 for Mac installs but doesn't function

    I've researched the forums and tried reinstall of PSE 8 and downloading the camera RAW updates. both 5.7 and 6.1. After looking at the various proposed solutions I can't seem to find the exact answer I'm seeking.
    The Camera RAW update installation completes properly but still won't open my Olympus EPL-1 RAW (.ORF) files.
    The Camera RAW Plug In info still says version 5.5.0.97
    I can view the .ORF files in Bridge, modify them and save as .dng, then open them in PSE 8.
    I'm new at this but assumed I would be able to open the .ORF files in PSE 8 without all the conversion. Did I miss something?

    You can't install ACR in PSE via the Adobe updater. It's lying to you. You need to go here:
    http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
    download the latest update and follow the instructions in the readme exactly. You need to remove the old plugin from the folder before putting the new one in there.

Maybe you are looking for

  • Flash CS5 custom component

    Hello, I have a problem since I improved my version of Flash (CS3 to CS5). I created a component in which there are several parameters. My problem concerns parameters which are "Number" type. It appears to no longer be managed the same way since CS5.

  • Cannot Import PowerPoint into Responsive Design Template

    Hi, I have a PowerPoint which needs to be converted to a Responsive Design Project. I notice that when I create a new Responsive design project, the Import PowerPoint is greyed out. Is this normal? Also if I create a basic Captivate Project, is it po

  • I deleted my bbm icon!

    I deleted my blackberry icon, but now I want it back, it says on blackberry world that its installed, what shall I do? Please help!

  • XDCAM EX SxS Cards will give Kernel Panic under Snow Leopard.

    In my conversation with Sony support they advised me that unfortunately Snow Leopard is not currently supported by the current versions of XDCAM related software's from Sony. Since this is a very recent release from Apple that involves significant ch

  • I can't use the 3D features in creative cloud on my pc

    Can someone tell me how to use the 3D feature in creative cloud on my pc