FlashPlayerPlugin_11_5_502_146.exe crashes in Windows 8 Pro using Firefox 18.01

After upgrading to Windows 8 Pro 64 bit from Windows 7, every page which has Flash content produces this error message:
'The instruction at 0x71a30000 referenced memory at 0x71a30000. The memory could not be written.
Click on OK to terminate the program'
If there are several Flash videos, it produces this error message for each one.
This does not happen on Internet Explorer, Google Chrome, Opera, or Safari. However, I do all my web development on Firefox because of good third party tools, so this is a real problem for me.

I disabled the protected mode as instructed, and the problem has resolved itself.
Many thanks.

Similar Messages

  • HT5925 AppleIEDAV.exe crashes everytime Windows 7 64 bit opens

    AppleIEDAV.exe crashes everytime Windows 7 64 bit opens. Any ideas?
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: AppleIEDAV.exe
    Application Version: 1.2.12.0
    Application Timestamp: 52867716
    Fault Module Name: ntdll.dll
    Fault Module Version: 6.1.7601.18247
    Fault Module Timestamp: 521ea8e7
    Exception Code: c0000005
    Exception Offset: 0002e41b
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    This just started to happen. I'm using IE 11. Of course.. Safari is dead.
    Thank you!

    Remove or uncheck Bookmarks in your iCloud control panel. That is what is causing most of the problems. At least that is what I've been able to gleen from reading other posts here in the forum.

  • File Explorer (explorer.exe) Crashes in Windows 8.1 at shutdown

    Hi,
    Iv been running a custom built PC with Windows 8.1 (Win7 upgrade to Win8 then 8.1) Now since a couple of weeks after Win8.1, which was running perfectly fine up until last month when I Started to get these Explorer.exe crashes, Im  quite knowledge able
    with PC so iv done various things such as System Restore (as far back a could) and also followed all the guides on using the Registry editor to disable the Shell Extensions, in addition iv also used Registry Recycler but all to no avail. I then saw this support.microsoft.com/kb/2929203
    and decided to use the charms bar to shut down but it still made no difference at all.
    I don't really want to preform a refresh because i have so many Desktop Programs installed and i have only had this issue since around Mid way through last month, each time on shut down the instructions (referenced memory) are different but all structured
    like: "The instruction at 0x referenced memory at 0x. The memory could not be read. Please if you could help me find a solution to solve this problem with
    out preforming a refresh, I know this could be a a program but event viewer tells me nothing so I would greatly appreciate any help.
    My System Specs are as follows:
    MB: Asus Sabertooth FX R2
    CPU: FX6300
    GPU: GTX660
    RAM: 8GB DDR3 1600
    OS: Windows 8.1 Pro 64bit With Latest Updates
    If you require any other info just ask :-)

    Another Update after changing some options in Event Viewer I get this two logs from each crash at shutdown: 
    The process C:\WINDOWS\Explorer.EXE (DESKTOP) has initiated the power off of computer DESKTOP on behalf of user Desktop\Calum for the following reason: Other (Unplanned)
     Reason Code: 0x0
     Shut-down Type: power off
     Comment:
    Followed by:
    Application pop-up: explorer.exe - Application Error : The instruction at 0xffffffff referenced memory at 0xffffffff. The memory could not be written.
    Click on OK to terminate the program
    EDIT: I also got the time of the first reported error: 02/02/2014 04:50:26

  • Adobe Flash Crash Problem Windows 8.1 FireFox

    I have had an issue with not being able to watch any video's or play games on my computer due to adobe flash constantly crashing. I have an HP computer- 64 with windows 8.1 and I use Firefox.  I thought I resolved the issue when I uninstalled and then reinstalled adobe, but when I restarted my computer for updates it went back to crashing. I have reset my firefox browser and that did not help anything. I also have found that everytime I restart or shut down my computer adobe flash goes back to malfunctioning. I also wanted to add that I checked the plugins on my browser and it says I have Adobe Acrobat 11.0.6.70 active and ShockwaveFlash 13.0.0.182 active. How do I fix this frustraiting problem?

    7acmartin wrote:
    IS NO ONE ABLE TO HELP ME!?!?!?  70+ People have seen this and not one is abe to help?
    This is a user-to-user forum... not support...  and sometimes, the people who have the answers are busy with other things.
    Have you done a complete "clean install"?
    Download the Flash Player uninstaller: Flash Player Uninstaller (825 KB)
    Download the Flash Player FULL Installer: Flash Player Plug-in (All other browsers)
    Go to: C/ Windows/System32/Macromed/Flash and delete EVERYTHING that Windows 8 will allow (It'll give you trouble with the ActiveX plug-in because it's embedded by Microsoft - avoid it)
    Go to: C/ Windows/SysWOW64/Macromed/Flash and delete EVERYTHING that Windows 8 will allow (Again, it'll give you trouble with the ActiveX plug-in because it's embedded by Microsoft - avoid it)
    Emtpy your Recycle bin.
    Run the FULL installer.

  • Sapinst.exe crashes on Windows 7 (ver. 6.1)

    Hi,
    I am trying to install Netweaver CE 7.11 on Windows 7 64-bit. Yes, I know it is not supported. But still, I would like to ask right about the reason sapinst.exe crashes.
    So, sapinst.exe can be launched in Win 7 native mode, but it is not compliant with OS compatibility. So I am trying to launch it in Vista mode. But sapinst.exe crashes with error log like this (sorry for flood, but see below).
    At the same time sapinst.exe launches in Win 7 native mode + 32-bit sapinst.exe launches in Vista mode. Only 64-bit sapinst crashes in Vista mode. I suspect this is related just to JVM and near that, and may be solved. Please, advise, if someone has more expertise than me or experience with such or similar situations.
    Thank you.
    Regards,
    Anton
    An unexpected error has been detected by SAP Java Virtual Machine:
    EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0000000076def2d5, pid=2852, tid=1484
    Java VM: SAP Java 64-Bit Server VM (5.1.000 Feb 13 2007 23:26:13 - 01_REL - optU - bas2:69696 (mixed mode))
    Problematic frame:
    C  ntdll::RtlCaptureContext+0x85 (0x4f2d5)
      T H R E A D  -
    Current thread (0x0000000000a4f3c0):  JavaThread "main" [_thread_in_Java, id=1484]
    siginfo: ExceptionCode=0xc0000005, reading address 0xffffffffffffffff
      P R O C E S S  -
    Java Threads: ( => current thread )
      0x00000000202dc930 JavaThread "HttpServer" [_thread_in_native, id=4028]
      0x00000000202dc580 JavaThread "HttpWorker" [_thread_blocked, id=3948]
      0x00000000202dc1d0 JavaThread "HttpWorker" [_thread_blocked, id=6148]
      0x00000000202dba70 JavaThread "HttpWorker" [_thread_blocked, id=2116]
      0x00000000202ddf50 JavaThread "AlarmClock" [_thread_blocked, id=1000]
      0x00000000202db310 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=7144]
      0x0000000020143230 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=5636]
      0x000000001f37f8c0 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=6060]
      0x000000001f37f1b0 JavaThread "AWT-Windows" daemon [_thread_in_native, id=316]
      0x0000000020010bc0 JavaThread "AWT-Shutdown" [_thread_blocked, id=1020]
      0x000000001f027180 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=5528]
      0x000000001f026880 JavaThread "CompilerThread1" daemon [_thread_blocked, id=5116]
      0x000000001f01fa70 JavaThread "CompilerThread0" daemon [_thread_blocked, id=5336]
      0x000000001f01f060 JavaThread "AdapterThread" daemon [_thread_blocked, id=6240]
      0x000000001f01e2f0 JavaThread "Control Handler" daemon [_thread_blocked, id=6532]
      0x000000001f01da00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=6072]
      0x000000001f018af0 JavaThread "JDWP Event Helper Thread" daemon [_thread_blocked, id=6636]
      0x000000001f014d10 JavaThread "JDWP Transport Listener: dt_socket" daemon [_thread_blocked, id=4964]
      0x000000001e805070 JavaThread "Finalizer" daemon [_thread_blocked, id=2964]
      0x000000001e8030f0 JavaThread "Reference Handler" daemon [_thread_blocked, id=324]
    =>0x0000000000a4f3c0 JavaThread "main" [_thread_in_Java, id=1484]
    VM Arguments:
    jvm_args: -Xmx256M -Dsun.java2d.noddraw=true -Dsap.env.var.javahome=SAPINST_JRE_HOME -agentlib:jdwp=transport=dt_socket,server=y,address=8000-8100,suspend=n
    classpath: C:\Users\user1\AppData\Local\Temp\sapinst_exe.5632.1284041309\jar\instgui.jar
    java_command: SDTGui instwizard host=localhost port=21201 -nolock
    Launcher Type: SAP_STANDARD
    Environment Variables:
    PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;
    USERNAME=user1
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 37 Stepping 2, GenuineIntel
    current directory: C:\Users\user1\Desktop\CE711_01_IM_WIN_X86_64_ADA
      S Y S T E M  -
    OS: Windows Vista Build 6000
    CPU:total 4 em64t ht
    Memory: 4k page, physical 4050608k(1810264k free), swap 8406516k(5986780k free)
    vm_info: SAP Java 64-Bit Server VM (5.1.000) for windows-amd64, built on Feb 13 2007 23:26:13 by unknown with MS VC++ 8.0
    hostname: IEVN60202577A

    Also, I noticed that possibly JVM crashes in ntdll.dll. Here are some libs, from the errorlog:
    0x0000000000400000 - 0x0000000000415000      C:\Users\i057882\AppData\Local\Temp\sapinst_exe.5528.1284043695\jre\bin\java.exe
    0x0000000076da0000 - 0x0000000076f4b000      C:\Windows\SYSTEM32\ntdll.dll
    0x0000000076c80000 - 0x0000000076d9f000      C:\Windows\system32\kernel32.dll
    0x000007fefcdb0000 - 0x000007fefce1b000      C:\Windows\system32\KERNELBASE.dll
    0x000007fefecb0000 - 0x000007fefed8b000      C:\Windows\system32\ADVAPI32.dll
    0x000007fefe980000 - 0x000007fefea1f000      C:\Windows\system32\msvcrt.dll
    Exception always occurs here: EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc= 0x0000000076def2d5
    So I assume ntdll.dll is the place where crash happens. Am I right? And what could it mean?
    Thanks.
    Anton
    Edited by: Anton Shabinskyi on Sep 9, 2010 5:59 PM

  • Internet explorer opens a new window when using firefox

    When using Firefox, Internet explorer sometimes opens the same website or opens up a pop up advertisement.
    == This happened ==
    A few times a week
    == Noticed it for the last week or so

    Do a malware check with a few malware scan programs.
    You need to use all programs because each detects different malware.
    Make sure that you update each program to get the latest version of the database.
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • EXe crashes and it shows that firefox has crashed . something APPCRASH

    i am using eXe as content authoring tool and everytime I run it crashes giving itis APPCRASH . I have also excluded this file in my antivirus but it still crashes.
    Thanks

    i am using eXe as content authoring tool and everytime I run it crashes giving itis APPCRASH . I have also excluded this file in my antivirus but it still crashes.
    Thanks

  • Skydrive.exe crashes on Windows 8.1 Pro RTM

    I'm trying to get Skydrive working on a fresh install of Windows 8.1 Pro RTM.  When I go to Skydrive (show my files in skydrive) via the "metro" app, the view is empty.  When I look at the skydrive folder in explorer.exe, it's also
    empty. 
    I went to a command prompt running as an administrator and ran "skydrive /shutdown" followed by "skydrive" in order to reboot skydrive.  When I attempt to start skydrive, I get two entries in the Event Log.  The second event
    viewer message refers to a file named Report.wer that contains info about the crash.  I've attached the contents of both eventvwr entries and the contents of Report.wer.
    I'm wondering if this has anything to do with Skydrive Pro being installed by the Office 2013 installer that comes from my Office 365 subscription. 
    Any thoughts on how to fix skydrive.exe? 
    Thanks,
    -Ben
    *** START OF ENTRY #1 ***
    Log Name:      Application
    Source:        Application Error
    Date:          10/18/2013 1:54:47 PM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      modena.benday.local
    Description:
    Faulting application name: SkyDrive.exe, version: 6.3.9600.16384, time stamp: 0x5215d0a0
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0x00000000
    Fault offset: 0x0000000000000000
    Faulting process id: 0x6ec
    Faulting application start time: 0x01cecc2b2291a23c
    Faulting application path: C:\Windows\system32\SkyDrive.exe
    Faulting module path: unknown
    Report Id: 605dbfaa-381e-11e3-8255-406c8f337b4e
    Faulting package full name:
    Faulting package-relative application ID:
    Event Xml:
    < Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-10-18T17:54:47.000000000Z" />
        <EventRecordID>5241</EventRecordID>
        <Channel>Application</Channel>
        <Computer>modena.benday.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>SkyDrive.exe</Data>
        <Data>6.3.9600.16384</Data>
        <Data>5215d0a0</Data>
        <Data>unknown</Data>
        <Data>0.0.0.0</Data>
        <Data>00000000</Data>
        <Data>00000000</Data>
        <Data>0000000000000000</Data>
        <Data>6ec</Data>
        <Data>01cecc2b2291a23c</Data>
        <Data>C:\Windows\system32\SkyDrive.exe</Data>
        <Data>unknown</Data>
        <Data>605dbfaa-381e-11e3-8255-406c8f337b4e</Data>
        <Data>
        </Data>
        <Data>
        </Data>
      </EventData>
    < /Event>
    *** END OF ENTRY #1 ***
    *** START OF ENTRY #2 ***
    Log Name:      Application
    Source:        Windows Error Reporting
    Date:          10/18/2013 1:54:48 PM
    Event ID:      1001
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      modena.benday.local
    Description:
    Fault bucket 125375516, type 4
    Event Name: APPCRASH
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: SkyDrive.exe
    P2: 6.3.9600.16384
    P3: 5215d0a0
    P4: StackHash_fc6e
    P5: 0.0.0.0
    P6: 00000000
    P7: 00000000
    P8: PCH_B0_FROM_KERNEL32+0x00000000000E957A
    P9:
    P10:
    Attached files:
    C:\Users\benday\AppData\Local\Microsoft\Windows\SkyDrive\logs\SyncEngine-2013-10-18.1354.1772-1.etl
    C:\Users\benday\AppData\Local\Temp\WER574C.tmp.WERInternalMetadata.xml
    These files may be available here:
    C:\Users\benday\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_SkyDrive.exe_ceb41ec558101759bb4b2155dc10e4a619612422_dd2e481b_2bec5901
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 605dbfaa-381e-11e3-8255-406c8f337b4e
    Report Status: 0
    Hashed bucket: 6159b27cd9fa18957f6e24562298e260
    Event Xml:
    < Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows Error Reporting" />
        <EventID Qualifiers="0">1001</EventID>
        <Level>4</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-10-18T17:54:48.000000000Z" />
        <EventRecordID>5242</EventRecordID>
        <Channel>Application</Channel>
        <Computer>modena.benday.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>125375516</Data>
        <Data>4</Data>
        <Data>APPCRASH</Data>
        <Data>Not available</Data>
        <Data>0</Data>
        <Data>SkyDrive.exe</Data>
        <Data>6.3.9600.16384</Data>
        <Data>5215d0a0</Data>
        <Data>StackHash_fc6e</Data>
        <Data>0.0.0.0</Data>
        <Data>00000000</Data>
        <Data>00000000</Data>
        <Data>PCH_B0_FROM_KERNEL32+0x00000000000E957A</Data>
        <Data>
        </Data>
        <Data>
        </Data>
        <Data>
    C:\Users\benday\AppData\Local\Microsoft\Windows\SkyDrive\logs\SyncEngine-2013-10-18.1354.1772-1.etl
    C:\Users\benday\AppData\Local\Temp\WER574C.tmp.WERInternalMetadata.xml</Data>
        <Data>C:\Users\benday\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_SkyDrive.exe_ceb41ec558101759bb4b2155dc10e4a619612422_dd2e481b_2bec5901</Data>
        <Data>
        </Data>
        <Data>0</Data>
        <Data>605dbfaa-381e-11e3-8255-406c8f337b4e</Data>
        <Data>0</Data>
        <Data>6159b27cd9fa18957f6e24562298e260</Data>
      </EventData>
    < /Event>
    *** END OF ENTRY #2 ***
    *** START OF Report.wer ***
    Version=1
    EventType=APPCRASH
    EventTime=130265924878577799
    ReportType=2
    Consent=1
    UploadTime=130265924880749087
    ReportIdentifier=605dbfab-381e-11e3-8255-406c8f337b4e
    IntegratorReportIdentifier=605dbfaa-381e-11e3-8255-406c8f337b4e
    NsAppName=SkyDrive.exe
    Response.BucketId=6159b27cd9fa18957f6e24562298e260
    Response.BucketTable=4
    Response.LegacyBucketId=125375516
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=SkyDrive.exe
    Sig[1].Name=Application Version
    Sig[1].Value=6.3.9600.16384
    Sig[2].Name=Application Timestamp
    Sig[2].Value=5215d0a0
    Sig[3].Name=Fault Module Name
    Sig[3].Value=StackHash_fc6e
    Sig[4].Name=Fault Module Version
    Sig[4].Value=0.0.0.0
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=00000000
    Sig[6].Name=Exception Code
    Sig[6].Value=00000000
    Sig[7].Name=Exception Offset
    Sig[7].Value=PCH_B0_FROM_KERNEL32+0x00000000000E957A
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.3.9600.2.0.0.256.48
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=1033
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=fc6e
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=fc6e14469e9be21ccec6d1e7f94ef71a
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=1bdc
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=1bdc6a015c688a7765d304004fa496f9
    UI[2]=C:\Windows\system32\SkyDrive.exe
    UI[3]=SkyDrive Sync Engine Host has stopped working
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=Check online for a solution and close the program
    UI[6]=Check online for a solution later and close the program
    UI[7]=Close the program
    LoadedModule[0]=C:\Windows\system32\SkyDrive.exe
    LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
    LoadedModule[2]=C:\Windows\system32\KERNEL32.DLL
    LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\system32\msvcrt.dll
    LoadedModule[5]=C:\Windows\system32\OLEAUT32.dll
    LoadedModule[6]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.9600.16384_none_62475f7becb72503\COMCTL32.dll
    LoadedModule[7]=C:\Windows\system32\SkyDriveTelemetry.dll
    LoadedModule[8]=C:\Windows\system32\SyncEngine.DLL
    LoadedModule[9]=C:\Windows\SYSTEM32\shcore.dll
    LoadedModule[10]=C:\Windows\system32\SHELL32.dll
    LoadedModule[11]=C:\Windows\system32\SHLWAPI.dll
    LoadedModule[12]=C:\Windows\system32\USER32.dll
    LoadedModule[13]=C:\Windows\SYSTEM32\combase.dll
    LoadedModule[14]=C:\Windows\system32\SspiCli.dll
    LoadedModule[15]=C:\Windows\system32\dwmapi.dll
    LoadedModule[16]=C:\Windows\system32\VERSION.dll
    LoadedModule[17]=C:\Windows\system32\ole32.dll
    LoadedModule[18]=C:\Windows\SYSTEM32\sechost.dll
    LoadedModule[19]=C:\Windows\system32\RPCRT4.dll
    LoadedModule[20]=C:\Windows\system32\GDI32.dll
    LoadedModule[21]=C:\Windows\system32\winbici.dll
    LoadedModule[22]=C:\Windows\system32\wevtapi.dll
    LoadedModule[23]=C:\Windows\system32\WINHTTP.dll
    LoadedModule[24]=C:\Windows\system32\WS2_32.dll
    LoadedModule[25]=C:\Windows\system32\XmlLite.dll
    LoadedModule[26]=C:\Windows\system32\loadperf.dll
    LoadedModule[27]=C:\Windows\system32\Secur32.dll
    LoadedModule[28]=C:\Windows\system32\WININET.dll
    LoadedModule[29]=C:\Windows\system32\PROPSYS.dll
    LoadedModule[30]=C:\Windows\system32\CRYPTSP.dll
    LoadedModule[31]=C:\Windows\SYSTEM32\advapi32.dll
    LoadedModule[32]=C:\Windows\system32\NSI.dll
    LoadedModule[33]=C:\Windows\system32\iertutil.dll
    LoadedModule[34]=C:\Windows\system32\IMM32.DLL
    LoadedModule[35]=C:\Windows\system32\MSCTF.dll
    LoadedModule[36]=C:\Windows\SYSTEM32\kernel.appcore.dll
    LoadedModule[37]=C:\Windows\system32\CRYPTBASE.dll
    LoadedModule[38]=C:\Windows\system32\bcryptPrimitives.dll
    LoadedModule[39]=C:\Windows\system32\uxtheme.dll
    LoadedModule[40]=C:\Windows\SYSTEM32\clbcatq.dll
    LoadedModule[41]=C:\Windows\system32\rsaenh.dll
    LoadedModule[42]=C:\Windows\system32\bcrypt.dll
    LoadedModule[43]=C:\Windows\system32\profapi.dll
    LoadedModule[44]=C:\Windows\system32\SETUPAPI.dll
    LoadedModule[45]=C:\Windows\system32\CFGMGR32.dll
    LoadedModule[46]=C:\Windows\System32\IDStore.dll
    LoadedModule[47]=C:\Windows\System32\wlidprov.dll
    LoadedModule[48]=C:\Windows\System32\netprofm.dll
    LoadedModule[49]=C:\Windows\system32\apphelp.dll
    LoadedModule[50]=C:\Windows\System32\SkydriveShell.dll
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=SkyDrive Sync Engine Host
    AppPath=C:\Windows\system32\SkyDrive.exe
    NsPartner=windows
    NsGroup=windows8
    ApplicationIdentity=58F36FD04AC6489A8303F7AC8A7EFE3B
    *** END OF Report.wer ***
    Benjamin Day - Microsoft MVP for Visual Studio ALM - http://www.benday.com/blog

    I think I found a fix!
    I went looking at %LocalAppData%\Microsoft\Windows\SkyDrive\logs and found some messages in the SyncEngine*.etl files in that dir.  (BTW, Visual Studio wants to open those *.etl files but it doesn't show anything.  It's easier to open these
    files in Notepad and wade through the mess of hex.  Eventually, you'll come to readable text.)  The messages were:
    1) Failed to show/hide SkyDrive Shell Items, error code: 0x80070002
    2) Unable to correctly read and parse the ClientPolicy.ini file
    A quick search brought up some posts complaining about the Win-X shortcut being broken.  (link) 
    I tried my Win-X key and it was indeed not working.  That forum discussion led to
    another forum post about Skydrive generating a lot of extra empty Skydrive folders in the user profile dir.   
    These posts suggested some commands to run from an Administrative command prompt.  
    *** START OF SCRIPT ***
    reg add HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CLSID\{8E74D236-7F35-4720-B138-1FED0B85EA75}\ShellFolder /v Attributes /t reg_dword /d 0x00100000 /f
    reg delete "HKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\WinX-fix-%COMPUTERNAME%" /f >NUL 2>NUL
    reg add "HKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\WinX-fix-%COMPUTERNAME%" /v Version /t REG_SZ /d "1" /f
    reg add "HKEY_LOCAL_MACHINE\Software\Microsoft\Active Setup\Installed Components\WinX-fix-%COMPUTERNAME%" /v StubPath /t REG_SZ /d "\"%ProgramFiles%\windows-8-fixes\fixWinX.cmd\"" /f
    xcopy /S /C /I /Q /H /R /Y "%PUBLIC%\..\Default\AppData\Local\Microsoft\Windows\WinX\**" "%LocalAppData%\Microsoft\Windows\WinX"
    *** END OF SCRIPT ***
    I ran the above commands and SKYDRIVE IS WORKING!!!!!!!!! :)
    Thanks for the help everyone!
    -Ben
    Benjamin Day - Microsoft MVP for Visual Studio ALM - http://www.benday.com/blog

  • My computer has been crashing when i am using firefox. I was watchung a new video first, then when i was trying to update my flash player like support suggested

    It started the first time when I had Firefox. I would be watch an online video and the picture would stop and the sound would become a buzz or a slow buzz and the sound trying to play. It became more and more. I chanced to chrome for a while. I wanted to try out fox again but it started all over again. It also happen when it looked up possible fixes and tried to update my flash player like suggested. It got to the point where it was downloading and the computer crashed. the only thing I can do every time is do a hard boot and start my computer all over again.
    I don't think I ever had to do that with chrome. Help me, I really do like Firefox a lot but I am going to have to go back to chrome. Also, another thing that is happening is my firewall program is popping up more with a TCP warning.

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
    Try to "disable the hardware acceleration" in the Flash Player.
    *http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
    See also:
    *https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
    Flash "Display settings" window:
    *http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

  • My Mac (10.5.8) has been crashing this week while using Firefox. The Firefox and Thunderbird updates are the only updates I can think of that are recent. Any ideas?

    My whole Mac has crashed a number of times both yesterday and today. This is very unusual. I'm not positive it's because of Firefox's new update, but it seemed like a good guess, and it was usually when I was on various websites (I was going through a lot of emails from news lists and clicking on links). I use Thunderbird for email, and Firefox is my browser of preference. It crashed three times so far today, over several hours, and yesterday I guess it probably crashed about 6 times -- not sure.

    Update Soundflower to the most recent version. You have an unsupported edition. http://code.google.com/p/soundflower/downloads/detail?name=Soundflower-1.6.6b.dm g&can=2&q=

  • Java.exe crashes with windows access exception

    When OracleASHome102HTTPServer starts I get a Win2000 access exception c0000005 on java.exe. Little DrWatson window pops up... O9i logs Logs show nothing. Only drwatson shows problem info, assembler dump, ets...
    Anyone know what's wrong? I've got O9iAS 1.0.2.0, Win2000SP1, Pentium 4, 1.4GHz, 512Mg RAM?
    I know there is a problem with the jre JIT compiler on the P4. Got around this during O9iAS installation by using the '-nojit' parameter on all invocations of jrew.exe and jre.exe. Is my java.exe problem still with the P4 chip?
    Regards,
    Jim Anderson

    solution
    I have solved the problem,and the method as follows:
    1.look for the dll file:symcjit.dll(the path is %oracle_home%\Apache\jdk\jre\bin) ,
    2.change the extension to .old
    3.restart the httpServer
    4.ok
    try it,and hope you good luck

  • Persistent crashes with everytime I use Firefox on laptop. No response to multiple reports after each crash

    For weeks Firefox has been crashing at random whether I have opened one site or several. Perhaps the most frequent is while using webmail. It is quite impossible to compose mail using address book. I have been sending reports many times a day without any response from Firefox. I am currently In Costa Rica using secure wifi. There is another computer being used alongside me without any complications.

    thanks, i've only looked at the first three of them, but they are all caused by the norton symantec security product you're using. norton has already released an update that fixes the crashes for its 2013 product line - a fix for norton 2012 should follow this week. for more information see: https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-18-Support-for-Norton-Toolbar/m-p/900991/highlight/true#M8266
    in the meanwhile you could disable the norton toolbar/identify safe in ''firefox > addons > extensions''. or [http://updatecenter.norton.com/?NUCLANG=en upgrade to a norton 2013 product] (which can be done free of charge when you're in an active subscription as far as i understand it).

  • I used to be able to open .pdf documents on my MacBook Pro using FireFox with NO problems, all of a sudden NOW they won't open and i get "unsupported" error messages. What the ****? I need to fix this ASAP! Can anyone help in simple non geek language?

    THANKS.

    Depending on which version of Firefox you're using, it no longer currently supports the plug-in provided with Adobe Reader. You have to use PDF Plugin 2.4.4. Just disable the Adobe plugin and use the Schubert plugin.
    Clinton

  • Sync bookmarks across two Windows 7 using Firefox 29?

    Hello Everyone,
    I have two windows 7's workstations. One workstation is a new install. The other is a laptop. On the new install I loaded Firefox 29. Didn't sync with the old sync server. So I upgraded the laptop to Firefox 29. I signed up for the new sync on both workstations. On the new install workstation no book marks have been moved from the laptop..
    Any help would be great.
    David

    Closing duplicate thread. Please continue at [https://support.mozilla.org/en-US/questions/999132 /questions/999132]

  • When I go onto certain websites that require flash, the program either doesn't work or it continues to refresh. I have windows vista, use Firefox 4, and am using Shockwave flash 10.3.181.4. Videos also start and stop.Am I using the correct flash?

    The two websites where I have the most trouble are www.diamondalignment.com, and blogtalkradio when I go to my switchboard. Every time the site refreshes firefox starts all over again, circling backwards then forwards.
    On every site I go to the circle icon goes backwards for some time then finally goes forward. This has really slowed down my computer. Appreciate your help.

    Hi again, LOL, sometimes it is just a small thing like clearing cookies/history that gets overlooked:-)
    You know, can't see the Forrest for the Trees..
    I'm glad it's working as it should for you!! We have enough to do, right? Like dealing with all of the Windows Patch Tuesday Updates, LOL
    Thanks for marking your thread as answered too.
    eidnolb

Maybe you are looking for

  • How to determine the name or type of a control in a existed VI?

    I got a couple of VIs other engineers created before. There are a couple of controls I can not tell the type or name of that control. I used LabVIEW ctrl-H to try to figure out what control was used but failed. I also tried to use "Edit\Customize Con

  • J2SE 5.0 CORBA logging

    I am running the J2SE 5.0 update 2 CORBA features. Just before a CORBA exception is thrown the logging service logs out the following stack trace. I was wondering if there is a way to disable only this function�s console logging? Apr 14, 2005 3:03:27

  • Flash dynamic text links

    I've created a dynamic (scrolling) text field in Flash MX 2004 Pro. The text contains links to webpages. The links work in the published Flash SWF but not when I place the SWF in Director. Please help? Lars

  • SmartForms - Problems with Text Element

    Hello guys! I was adjusting a SF for the BID_INVITATION scenario (SRM) when i stopped in front of a problem. I included the word "Data" in a Text Element that there was already, but, my new word doesn't appear in the Form. Anyone know what is happeni

  • Premiere's not recognizing my avi files

    I have a bunch of avi files that I made a few years ago.  I can't remember what codecs were used exactly.  I now have need to use this files again and do some editing to them but Premiere's not recognizing them for some reason.  CS6 imports the audio