FlashPlayerPlugin_11_9_900_117.Exe – Application Error X The exception unknown software exception (0

How do I get rid of this error.

In my Mozilla Google Browser
Best Regards,
L.D. Bud Thatcher Jr
Metro Logo Ion Logo Tran outlook copy
Cell: 908-616-6495
Email: bt@metrosales reps.com
Visit Our New Website: <http://www.metrosalesreps.com> www.metrosalesreps.com

Similar Messages

On some sites the following error message terminates the connection. Firefox.exe application error. The exception unknown software exception (0xc0000417) occurred in the application at location )x78579231.

Internet Explorer does not balk on those same sites. Most sites do not cause the disconnect but on those that do I must revert to IE to complete the visit.

Please reinstall Firefox as follows: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file ''to the desktop'' using IE8. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Next, reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

RWRBE60.EXE - Application Error. The memory could not be written - URGENT !

Hi,
We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in two of the 5 machines. That too, this error is encountered only some times and not always.
Scenario: The report builder generates the .PDF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.20.1.
This error is encountered in only 2 machines but not always.
It's a critical release issue. Could any let us know the possible solution?
Thanks,
Uma

Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

RWRBE60.EXE - Application Error. The memory could not be "read" - URGENT !

Hi,
We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in some of the machines. That too, this error is encountered only some times and not always.
Scenario: The report builder generates a .RTF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.25.0.
This error is encountered only in some machines but not always.
It's a critical release issue. Could any let us know the possible solution?
Thanks,
Monica

Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

Java.exe - Application error. The instruction at "0x504c42b8" referenced memory at "0x00000009".The memory cannot be "read".

Our production application is experiencing the following error with increasing
frequency.
Windows 2000 Dialog Box:
java.exe - Application error.
The instruction at "0x504c42b8" referenced memory at "0x00000009".The memory cannot
be "read".
Click on OK to terminate program.
Does anybody know the cause and solution to this problem?
We're using WL 5.1.0 sp11 jvm version 1.2.2_007
However, searching the web indicates the error message occurs with a variety of
configurations.
[javaError.gif]

John Slaman wrote:
>
Our production application is experiencing the following error with
increasing frequency.
Windows 2000 Dialog Box:
java.exe - Application error.
The instruction at "0x504c42b8" referenced memory at "0x00000009".The
memory cannot be "read".
Click on OK to terminate program.
Does anybody know the cause and solution to this problem?
We're using WL 5.1.0 sp11 jvm version 1.2.2_007
However, searching the web indicates the error message occurs with a
variety of configurations.I believe this is a memory flaws problem, cannot read memory can be in 2
ways: either the address has been allocated (reserved) by some other
resources or the address specified is not valid (phantom lookup).
Try to get a higher version of WLS.
Thanks,
Neo Gigs
"Follow the white rabbit..."

Firefox will not start and I get firefox.exe Application Error with the code 0x00000000, I've tried reloading but always get the same error message!

Firefox will not start, I've tried opening in safe mode, no joy. I get the firefox.exe application error 0x00000000
== This happened ==
Every time Firefox opened
== Possibly after a windows update ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; YPC 3.2.0; .NET CLR 1.1.4322; InfoPath.1)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Why do I get the Application Error jqsnotify.exe-Application Error. The memory could not be read?

Why do I get this error message every time i opened up Firefox saying: jqsnotify.exe-Application Error and then at the bottom line it says: The instruction at "0x5ff3d322"referenced memory at " 0xe41203c3". The memory could not be "read". Click on OK to terminate the program.
== This happened ==
Every time Firefox opened
== I recently renewed and installed the CA Security Suite and un-installed Firefox and re-installed it again.

System restore did it for me........!!!! It's gone and I don't miss it one bit.....!!!! May be one of those untraceable tricks that hackers use to irritate people.....Some security programs can identify these things ,but the perps usually use bogus addresses to send them anyway...Cyber criminals SUCK....That is right ,I said that.... and they should be jailed and fined and suspended from internet usage all over the globe....
Reverend K.
CEO,FOUNDER,Site Editor,
http://WWW.CCCINTL.NET

Itunes: itunes.exe - Application Error. The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be "written"

Itunes: iTunes.exe - Application Error
The instruction at "0x00000000" referenced memory at "0x00000000".
The memory could not be "written"
Anyone have solution. Already tried uninstall and reinstall

Did you sort this issue out?
I have the same problem.

Dreamweaver.exe - Application error. The application was unable to start correctly (0x000007b) Click to close application.

I am trying to launch Dreamweaver CC and keep getting application error.

Please follow the steps mentioned in document : http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html

What is causing this error message? FlashPlayerPlugin_11_9_900_117.exe-Application Error the exception unknown software exception (0xc0000710) occurred in the a

I keep getting this error message every time I open certain sites such as Facebook, Wayfair, etc. I have uninstalled Flash many times and re-installed it many times but keep getting this message.

I had the same problem.
I went through the troubleshoot and it's not the extensions etc.
The Adobe Flash Player Plugin version 11.9.900.117 seems to be the problem.
Flash still plays fine, just the pop-up happens and not sure why.
If it's annoying you, try installing the older version:
Uninstal this version (v11.9), and re-install the older version (v11.8)
You can find older versions on :
''http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html''
To test this, I installed this version :
''(Released 9/10/2013) Flash Player 11.8.800.168 (156.2 MB)''
It downloads a zip file, which contains 7 files, I ran the file :
''flashplayer11_8r800_168_win.exe''
And now the pop-up does not happen.
==================================================
Note 1: I did this:
:1: uninstall v11.9
:2: open firefox (so I'm opening up firefox without flash)
:3: go to youtube = a popup to install flash appears, click to install
The version it offered was not 11.9, but 11.8 : strange! why not v11.9?
: anyway, if you try to install v11.8 this way, it always fails
==================================================
Note 2:
This problem only happens on my main home desktop and does not happen on my other machines (which all are Firefox Sync-ed, so all running same extensions etc...)
Strange!
==================================================

I am getting a firefox.exe-Application error. The instruction at 0x77029d13 referenced memory at 0x77ebe57c. The memory could not be read. Click on OK to terminate. Then it boots me off the web?

I use Wildblue.net for internet server. This morning I could get my e-mail but when I went to the web, the message above came up. The only way to get if off the screen was to press OK. That brought me back to my desktop. I deleted Firefox and reinstalled it, but received the same message. I don't get it all the time, but for the better part of the day, I have been trying to operate around this message.Thanks for you help.
Betts

I use Wildblue.net for internet server. This morning I could get my e-mail but when I went to the web, the message above came up. The only way to get if off the screen was to press OK. That brought me back to my desktop. I deleted Firefox and reinstalled it, but received the same message. I don't get it all the time, but for the better part of the day, I have been trying to operate around this message.Thanks for you help.
Betts

Safari for Windows: WebKit2WebProcess.exe - Application Error

Scratching my head over this one...
Running the latest version of Safari 5 for Windows XP and after clicking the RSS feed icon in the address bar, Safari loads the page...and then hangs. I'll close the application and receive the following notification window:
WebKit2WebProcess.exe - Application Error
Quote
The exception unknown software exception (0xc00000fd) occured in the application at location 0x00ce30f8. Click OK to terminate the program.
Norton is installed on this machine (No arguments, please). Also using Malwarebytes Anti-Malware and SUPERAntiSpyware. I'm currently performing scans...starting with Malwarebytes. Not sure if its an infection but, it sure behaves like it may be.
Also...I do not have an issue using RSS feeds with any other browser.
Any suggestions?
Edit...
Just finished the quick scans with all programs listed above. No threats detected.

And Symantec and users say it is safe and fine to run multiple security suites I suppose too. There are reasons why you hear a thunderous number of people... I own and used a bunch and while they improve... even Kaspersky is no longer on my systems and replaced with Microsoft's own Security Essentials along with IE10 and Windows 8 CP.
Safari has never been a good multithreaded app, not on Windows or Mac OS.
There are some Google hits but then this is XP which if memory serves, was hard to maintain it and registry or without reinstall every 6-12 months.
I ran into "TDSS rootkit" or infected photos on Tumblr and in the end, the drive needed to be reformatted. I could not even install a new OS on another drive with that drive still active.
http://www.zdnet.com/blog/security

Nimax.exe - Application Error. Instruction at 0x6d8e3e61 referenced memory at 0x00000000. The memory could not be "read."

On startup I get a nimax.exe application error.
The instruction at "0x1ce30df7" referenced memory at "0x00000000". The memory could not be "read".
This happens every time I start the computer, run a vi with the initialize.vi or try to use the measurement and automation explorer.
I am running windows XP, Labview 7.1, and max 3.1.1

I had a similar problem in win2000 / max 3.1.1. I do not recall the exact memory location error.
It happened every time I started the computer, or once started, evrytime I load a vi that has some daqmx functionlity.
I reinstalled windows / Nidaq, and never had the error again.

Designer 6i R4.1.1 - orainst.exe - Application Error

Setup.exe fails after the first 4-5 with application memory error:
The application, , generated an application error The error occurred on 01/17/2002 @ 15:30:32.740 The exception generated was c0000005 at address 00F7071E (<nosymbols>)
Any sugestions ?

No answers ?
Has anyone successfully run Designer 6i R4.1.1 installation ?
Btw. I downloaded Designer 6i R4.1.1 from Matalink/Patches.
What happens when I run setup.exe is the following:
selecting Oracle Home -->
Choosing Oracle Repository and Designer Install Wizard -->
accepting default packages -->
accepting default specifying behaviour -->
accepting default Customization options -->
accepting default options for import/export tools -->
The program stops with a popup error message:
Oracle Installer: orainst.exe - Application Error.
The instruction at "0x00f7071e" referenced memory at "0x00000000".
-- Peter

JFileChooser causes "java.exe - Application Error"

Hi,
When I'm closing an JFileChooser dialog (by e.g. pressing ok or cancel) a second or so later my JVM terminates with the error message "java.exe - Application Error. The instruction at "0*6d0ea46e" referenced a memory at "0x00000000". The memory could not be "read". Click on OK to treminate the program".
I turned on verbose output from the JVM and the last printout was:
[Loaded javax.swing.Autoscroller from C:\Program Files\Java\jdk1.5.0\jre\lib\rt.jar]
[Dynamic-linking native method sun.awt.windows.WComponentPeer.removeNativeDropTarget ... JNI]
result 1
[Dynamic-linking native method sun.awt.windows.WFramePeer.getState ... JNI]
[Loaded java.awt.EventDispatchThread$StopDispatchEvent from C:\Program Files\Java\jdk1.5.0\jre\lib\rt.jar]
[Dynamic-linking native method sun.awt.windows.WToolkit.shutdown ... JNI]
No exception is shown.
I have uninstall all old JVMs and reinstalled JDK 5.0. This does not help.
This simple program causes the termination of the JVM:
public static void main(String[] args) {
System.out.println("0");
JFileChooser fileChooser = new JFileChooser();
System.out.println("1");
int result = -2;
try {
result = fileChooser.showOpenDialog(null);
} catch (HeadlessException e1) {
e1.printStackTrace();
System.out.println("result " + result);
try {
Thread.sleep(5000);
} catch (InterruptedException e) {
// TODO Auto-generated catch block
e.printStackTrace();
System.out.println("2");
I receive the printout "result" but not "2".
I appriciate any help!
BR
/Marcus

No, this is very bad. Any time you see a message like this mentioning a memory address, it means that java, not you, has crashed. There's no way for you to fix this. The only thing you can try is to work around it.
My suggestions:
1. Report it to Sun. Make sure you include your system info (processor, memory, computer manufacturer) and what version of java you're using
2. Try downloading and installing a different version of java

FlashPlayerPlugin_11_9_900_117.Exe – Application Error X The exception unknown software exception (0

Similar Messages

Maybe you are looking for