Flat file Error in conversion exit CONVERSION_EXIT_PERI6_INPUT
Hello Experts!
I´m trying to upload a flat file data to an infocube and appears an error which diagnosis is:an error ocurred in record 1 during execution of conversion exit CONVERSION_EXIT_PERI6_INPUT for field CALMONTH.
Procedure: Check That the record where the error ocurred has the correct format , and correct it accordingly.
The characteristics in this fields (CALMONTH) are:
- Data Type: numc-character string with only digits.
- Length: 6
- Convers.rout. PERI6
- Output Length 7
I hope You can help me soon.
Thank you!
Hi Eduardo Vergara,
You just have to make sure the 0CALMONTH format is exactly the same. We have to match the format in the both columns. So in DataSource/Trans.Structure File CALMONTH change the Type to Numc and length o 6 . This is our problem but the tip is to match the proprieties.
Regards,
Alberto.
Similar Messages
-
Error in conversion exit for DATE
Hi
I am loading transaction data to Zcube from a flat file ,for 0CALWEEK
in excel I am unable to type 022007,if I load 22007 I am getting error like
Error in conversion exit
CONVERSION_EXIT_PERI6_INPUT
here 2 is the 2nd week in 2007
Plz provide me how to format cell in excel to take 0 as starting number and the file will be saved as CSV format or any other procedure
Thanks
PadmanahaHi,
Select the column in excel
Right Click and choose format cells.
In the pop up window, the first tab is for formatting. A list will be available, there you have to choose "Date" format.
Within the date format, you will find number of options to set the formatting according to your specifications.
If that does not work out, just use "Custom" format as "mmyyyy" for all the cells in that particular column.
With Regards -
I SEARCH 4 THESE QUESTION WHETHER ITS ANSWERED OR NOT ... IT WAS NOT ANSWERED YET...
hey guys while i were loading the csv(flat file) in infopackage...its showing this error...."Error in conversion exit: CONVERSION_EXIT_ISOLA_INPUTCONVERSION_EXIT_ISOLA_INPUT"
IF YOU KNOW THESE LET ME KNOW...
COULD U PLESE TELL ME THE PROCESS STEP BY STEP ... I'M A NOVICE USER...This error occurs with respect to the Language field. When it tries to convert the ISO language of 2 character representation to internal 1 character representation.
http://help.sap.com/saphelp_45b/helpdata/en/35/034cb2fed01622e10000009b38f9b8/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/108a8282-828b-2a10-8c92-a4db24e33c8f
hope it helps, assign points if helpful.
Regards, Uday pothireddy -
Hi,
This is Bhu,
New to this site,
I am learning BW now,
I am facing the following problem while loading the transaction data from flat file.
Error message : error in conversion exit CONVERSION_EXIT_UNIT_INPUT.
Kindly help me in sorting out this problem.
Thanks,
Bhu.Hi Bhu.
I usually see this problem when the unit of measure is not set up in the system. In order for the unit of measure to pass the conversion, you will need to add the unit to the allowed list. That can be found in the IMG (transaction SPRO).
Hope that helps.
Adam -
Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT
Dear all
I got the following error
" Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT "
This is an original sample data.
~
CUST007,SREP07,MAT008,3,DZ,1,,19990424
CUST008,SREP08,MAT008,3,DZ,2,,19980328
CUST008,SREP08,MAT009,2,CS,3,,19980203
CUST008,SREP08,MAT010,1,LB,4,,19991104
CUST009,SREP09,MAT011,1.5,LB,5,,20000407
CUST010,SREP10,MAT011,1.5,LB,6,,20000701
~
you can download it from [ http://safariexamples.informit.com/0201703661/IC_DEMOBC.csv ]
As you can see , [T-Code CUNI screenshot] ( http://static.flickr.com/35/71412534_4998517812_o.jpg )
there is no LB.
so i tried to create LB. but... i couldn't ..
Because, LB already exists in the Table T600 & T600A
T600 screenshot ( http://static.flickr.com/35/71412793_dcbae3d11a_o.jpg )
T600A screenshot ( http://static.flickr.com/34/71412535_96f9278862_o.jpg )
What do you think ?
The value of SPRAS is DE.
is it possible to cause the error ?
Well, i deleted the value of UNIT column from the original data so that i could escape the error " Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT ".
~
CUST007,SREP07,MAT008,3,,1,,19990424
CUST008,SREP08,MAT008,3,,2,,19980328
CUST008,SREP08,MAT009,2,,3,,19980203
CUST008,SREP08,MAT010,1,,4,,19991104
CUST009,SREP09,MAT011,1.5,,5,,20000407
CUST010,SREP10,MAT011,1.5,,6,,20000701
~
But i don't think it is a right way. isn't it?
Thanks in advance.
David.KangDear Eugene
Thanks a lot today.
Yeah, my incoming data do not match with the transfer structure.
Take a brief look at my case studies.
[Data Selection] tab
http://static.flickr.com/34/71452760_2117e1d4c0_o.jpg
[Data targets ] tab
http://static.flickr.com/34/71452762_035aaa8d78_o.jpg
[Processing ] tab
http://static.flickr.com/34/71452763_fa322fe8f1_o.jpg
[External Data] tab
1) IC_DEMOBC.csv ( It includes the value of UNIT column. )
( The original data file is http://safariexamples.informit.com/0201703661/IC_DEMOBC.csv )
http://static.flickr.com/20/71452764_fb4a24a809_o.jpg
- Preview result screenshot
http://static.flickr.com/35/71452765_07a4ae8e12_o.jpg
2) IC_DEMOBC2.csv ( It inculdes only two rows with UNIT values : CS. )
http://static.flickr.com/20/71452766_da7b2c46b7_o.jpg
- Preview result screenshot
http://static.flickr.com/35/71453112_348077e31a_o.jpg
3) IC_DEMOBC3.csv ( It inculdes all rows without UNIT values. )
http://static.flickr.com/34/71453113_301afeca73_o.jpg
- Preview result screenshot
http://static.flickr.com/20/71453114_8438122d06_o.jpg
I try to solve it by myself.
( i already spend almost one week~~ . )
but i feel the end is coming soon.
with kind regards
david -
Error in conversion exit CONVERSION_EXIT_PERI7_INPUT
Hi Gurus, I am trying to load 3 external flatfiles. They are all similar files with only year difference 2006,2007 and 2008. I was able to load 2 of these files for year 2006 and 2007. Now I am getting this error message "Error in conversion exit CONVERSION_EXIT_PERI7_INPUT" and in details I get "An error occurred in record 1 during execution ofconversion exit CONVERSION_EXIT_PERI7_INPUT for field FISCPER".
This indcates the field 0FISCPER. When I check the data type it is the same for all the files. The conversion routinr PER17 is also same for all. I still do not get why I am getting this error. Does anybody have a hint on this?Hi Bigtoja,
There has to be something different in the 3rd file. If not the format then, data. The reason is that, the first 2 files are loaded. Try the following to confirm. If the data is similar, you should be able to load it. Take a backup of the File 2. Copy the contents of File3 into File2. Make sure that the format of all the columns are same. Now, upload File2. If data is correct, it gets loaded. Otherwise, something wrong with wither format or data. You have the backup of File2 in case something is screwed. Hope it makes some sense.
Thanks and Regards
Subray Hegde -
Flat files to XML conversion module?
Hi Experts,
I would like to know from where I can have free download for flat files to XML conversion module which I can test in development server. Your help will be well appreciated.
Thanks and Regards,
Praveen.u have file adapter with FCC which does the flat file to XML conversion. wat is ur requirement?
refer the help or search on SDN for file content conversion.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
few examples:-
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Key value:
How to send a flat file with various field lengths and variable substructures to XI 3.0
File Receiver with Content Conversion
chirag -
Error in Flat File to XML conversion
Hi all,
I am trying to convert a flat file to XML using the Sender File Adapter and I am getting the following error message.
2006-01-23 17:23:00 EST: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR converting document line no. 2 according to structure 'GL_FileUpload_SAPECC_Header_DT1':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified!
My flat file looks like this,
--Start
GL,GLI,1,RefTest,4011,Test,1234567890,12032005,12032005,GL,RK
GL,GLI,4011,3011,,,,,,AU,600,7000,8000,9000,5000,RK,,,,,,,,,,,,,,,,,,,,
---End
The adapter configuration is like this:
Document Name: GL_FileUpload_SAPECC_Item_MT1
Document Namespace: urn:corptech.qld.gov.au:sss_std_offering:gl
RecordSet Name: GL_FileUpload_SAPECC_Record_DT1
RecordSet Namespace: urn:corptech.qld.gov.au:sss_std_offering:gl
RecordSet Structure: GL_FileUpload_SAPECC_Header_DT1,1,GL_FileUpload_SAPECC_Item_DT1,*
RecordSet Sequence: Ascending
Key FieldName: TransType
On the Adapter Properties, I have got:
--Start
GL_FileUpload_SAPECC_Header_DT1.fieldNames: TransType,RowType,SequenceNo,ReferenceKey,SenderSystem,HeaderText,CompanyCode,DocumentDate,PostingDate,DocumentType,ReferenceNo
GL_FileUpload_SAPECC_Header_DT1.fieldSeparator: ,
GL_FileUpload_SAPECC_Item_DT1.fieldNames: TransType,RowType,SequenceNo,GLAccount,CostCentre,ProfitCentre,InternalOrder,WBSElement,TaxCode,Currency,GLAmount,VendorAmount,CustomerAmount,AssetAmount,DRCR,ItemText,VendorNo,CustomerNo,Name,Street,City,PostCode,PoBox,State,Country,BankKey,BankAccount,BankCountry,CalcTax,PaymentTerms,BaseDate,PaymentBlock,PaymentMethod,Assignment,AssetNo,AssetSubNo,AssetTransaction
GL_FileUpload_SAPECC_Item_DT1.fieldSeparator: ,
ignoreRecordsetName: true
GL_FileUpload_SAPECC_Header_DT1.keyFieldValue: GL
GL_FileUpload_SAPECC_Item_DT1.keyFieldValue: GL
---End
The structure defined on the data type looks like this,
--Start
GL_FileUpload_SAPECC_Record_DT1 Complex Type
GL_FileUpload_SAPECC_Header_DT1 Element
TransType Element
RowType Element
Sequence Number Element
GL_FileUpload_SAPECC_Item_DT1 Element
TransType Element
RowType Element
Sequence Number Element
GLAccount Element
---End
Any help or suggestion please.
Thank you.
Warm Regards,
RanjanHi, Ranjan.
First of all, let's look at the meaning of the error.
> ...Exception: ERROR converting document line no. 2 according to
> structure 'GL_FileUpload_SAPECC_Header_DT1':java.lang.Exception:
> ERROR in configuration: more elements in file csv structure than
> field names specified!
It seems that XI interpreted 2nd line as
Header_DT1 not as Item_DT1 that you meant.
> GL,GLI,4011,3011,,,,,,AU,600,7000,8000,9000,5000,RK,,,,,,,,,,,,,,,,,,,,
That's why it says this line has more elements than the structure
defined(Header_DT1)
And the reason why XI misinterpreted the above as Header is that
you used keyFieldValue with the same value.
> ...Header_DT1.keyFieldValue: GL
> ...Item_DT1.keyFieldValue: GL
According to the following help,
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
it says like the following.
Key Field Name
If you specified a variable number of substructures for Recordset
Structure, in other words, at least one substructure has the value
*, then the substructures must be identified by the parser from
their content. This means that a key field must be set with different
constants for the substructures. In this case, you must specify a key
field and the field name must occur in all substructures.
How about using different constants for header and item if possible?
Good luck. -
Flat File error in BI 7.0
Hi,
I am getting an error while doing transformation.This is due to conversion for Price. I gave 0_currency in flat file.In transformation iam unable to generate a propasal for tht.Pls anyone help me in this..Points wil be assigned.
Thanks,
Prasanthi.Hi,
I gave INR in the flat file.i created nameand no. as characteristics,price ,qty as key figures.In my flat file i have name ,no ,price,qty,0curreny,0unit.I have a problem creating a link for currency and unit..its generating link for ename,no.,price,qty..pls explain me how to do this..should i assign a ocuureny and ounit in templates in proposal..what should i do? -
Rdbms table to flat file: error at creation of flat file
hi
i created a mapping in which , i want to transfer data from a rdbms table to a flat file.I created the flat file using owb and gave the location of the flat file as E:/........./folder.When i try to deploy the mapping. The flat file isnt getting created .validation and scripts are ok, but deployment is failed with the below,error.
ORA-01031: insufficient privileges.
Create failed.With 11gR2 of OWB you will need to either grant CREATE ANY DIRECTORY privileges to the target user so that when the directory is created when the OWB connector is deployed will work. Or the other option which is more secure is to have the dba create a directory and grant read/write privs on this directory (and when creating the connector in OWB, reference this SQL directory in the database). The CREATE ANY DIRECTORY option is ok above to get up and running and understand what is going on.
Cheers
David -
hi
i am learning how to Move data to flat file to db..i try to connect flat file i create logical schema and model upto reverse engineer i did i correctly get all column names from flat file but while try to see data its showing error
" Execution of Query Failed"
"ODI 40439 could not reading heading from the row"
How to solve this issueya i found solution for this..i kept that flat file in E:\ but i want to keep in Where odi is installed "
ex
D:\Oracle\Middleware\Oracle_ODI1"
Now i can view that flat file data -
MessageTransformBean in sender JMS Adapter flat file to xml conversion
Hi All,
The scenario is MQ (Flat File ) --->PI -
>Idoc
The flat file structure is
112233
AABBCC
The expected XML Structure after using MessageTransformBean in the sender JMS adapter is
<Record>
<Row>
<f1>11</f1>
<f2>22</f2>
<f3>33</f3>
</Row>
<Row>
<f1>AA</f1>
<f2>BB</f2>
<f3>CC</f3>
</Row>
</Record>
But I am getting 2 SEPARATE xml messages each with only one Row in it like the following
1st XML:
<Record>
<Row>
<f1>11</f1>
<f2>22</f2>
<f3>33</f3>
</Row>
</Record>
2nd XML:
<Record>
<Row>
<f1>AA</f1>
<f2>BB</f2>
<f3>CC</f3>
</Row>
</Record>
I would like to have one xml message with all rows in it.It seems the MessageTransformBean is not recognizing the end of line in the flat file.Do i need to use endSeparator explicitly.
I followed the "How to use Content Conversion in JMS Adapter " and configured the adapter,still no luck..
Any Help greatly Appreciated
Thanks,
CHi Chirag,
The parameter name sequence changes alphabetically by itself when I save and activate it eventhough I enter as it is in the document.How to stop changing this sequence or put it the order as required in the Module Processor.
Currently my sequence is
Transform.Class
Transform.ContentType
xml.conversionType
xml.documentName
xml.documentNamespace
xml.fieldFixedLengths
xml.fieldNames
xml.processFieldNames
xml.structureTitle
Let me know how to change the sequence ,if that is the issue.
Thanks,
C -
hi gurus
While uploading data into ODS by flat file got error :
ORA-14400: inserted partition key does not map to any partition
Cause: An attempt was made to insert a record into, a range or composite range object, with a concatenated partition key that is beyond the concatenated partition bound list of the last partition -OR- an attempt was made to insert a record into a list object with a partition key that did not match the literal values specified for any of the partitions.
Action: Do not insert the key. Or, add a partition capable of accepting the key. Or, add values matching the key to a partition specification.
regards
shashiAlso,
pls. refer to earlier forum posting..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/forums/sdn_jive_forums/thread{74687265616449443d313435343239}.jspa
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/forums/sdn_jive_forums/thread{74687265616449443d313034343337}.jspa
Thanks,
Raj -
Flat file error : SQL :RSDU_TABLE_SPLIT_PARTITION_MSS
Hi Guys,
I have issues in flat file loading, Infopackage is failed with error.
The request is yellow in status in RSMO, though the relavane job got cancelled with "RSDU_TABLE_SPLIT_PARTITION_MSS: Error During SQL Execution for Table /BIC/FCUBE_NAME" reason.
Performed repair on the PSA table using RSRV and deleted old PSA data.
Even though, the load is getting failed.
Any help on this is appreciated.
Regards,
JeelaniHi Ramana,
I am experiencing similar issue, i still can't solve it, we are on SP16 with SQL 2005 platform, never experience such a problem until we have upgraded to SP16 from SP9, the following note explain explain something we do about it, but i don't like the solution. it seems SAP has handed over the infocube partition job to us to maintain rather then the system to do the job.I
Note 1008833 - Supplementary SAP Note about repartitioning
regards, -
Hi All,
I'm attempting to extract a table to a flat file. I have been successful in importing flat files, however, when trying to export I receive the following error:
SAP DBTech JDBC: [2048]: column store error: table export failed: [30109] Could not create export location
The export command I use is: export <table name> as csv into '/hana/tmp/';
The export directory above is correct and is the same location that I use to do an import. I've also tried exporting a table using File>Export> menu option. At first I received an error stating SAP DBTech JDBC: 258 (at 69): insufficient privilege.
The user I am using has both IMPORT and EXPORT privileges. I'm suspecting that some OS level permission is required. The target folder has write permissions so this should be ok.
Has anyone had any success export table contents to a csv file?
Regards,
Gary ElliottHi Gary,
On the OS level, the <sid>adm account needs read, write and execute permissions on the /hana/tmp folder.
Make sure these permissions are set and try again. I don't see anything wrong with your export statement syntax, so I think that the folder permissions must be the issue.
Cheers,
Jody
Maybe you are looking for
-
I have a 4th generation iPod. I had a song start to skip one day and the next time I tried to connect to my computer iTunes did not recognize my iPod. I've gone through all the suggested steps on the website even up to and including uninstalling/rein
-
Good morning Flexers... I am unable to connect to my CFC's on one machine. I think the problem is that I can not find my flex2gateway with a web browser. This machine is hosting multiple domains and is running WIndows 2000 Pro, IIS version 5.0, CF Se
-
Configure send connector for exchange online protection
Hello Forum members, I am trying to configure send and receive connectors for Exchange 2010 to route on-premises mailboxes to Exchange OnLine Protection. The "help" info MS provides is for Ex 2013 - and the EAC GUI and config does not lend a close f
-
Cannot export video: AME cannot read from source, Installation Error
Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked. I cannot export anything from Premier Pro using Media Encoder. When I try, I get an yellow warning sign saying that it cannot read f
-
Hi, Is it possible to link Fact and Dimension tables with two conditions using OR. I have one dimension table for Customer Sites where Site_Use_ID (Pk). But in my Fact table, Bill_To_Site_Use_ID and Ship_To_Site_Use_ID SITE_USE_ID = BILL_TO_SITE_USE_