Flat File loading Initialize with out Data transfer is disabled in BI 7.0

Hi experts,
When loading through flat file in BI 7.0 for Info Package Level Initialization Delta Process with data Transfer is coming by default,but when i want to select Initialization Delta Process without Data transfer is disabled. (in the creation of Data Source (flat file) in the Extraction Tab Delta Process is changed to FIL1 Delta Data (Delta Images).
please provide me Solution.
regards
Subba reddy.

Hi Shubha,
For flat file load please go throught he following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/03450525ee517be10000000a1553f6/frameset.htm
This will help.
Regards,
Mahesh

Similar Messages

Init with out data transfer and DELTAS

Dear Gurus,
I created Generic data source using Function module on FAGLFLEXT table. Here i used TimeStamp for capturing DELTAS. In the first run while loading into PSA i selected INIT WITH DATA TRANSFER then it got failed. Again i deleted INIT Request in Schedular and RUN INIT WITH OUT DATA TRANSFER then it got Sucess. Again i run Delta then it also it got failed. Again i deleted the INIT Request and out FULL LOAD. IT got success. May i know why MY Deltas are getting Failed.even in R/3 side when i checked in RSA7 then in status column and in Current Status Tab it showing time stamp field like this . . : :.
I got Stuck up I dont know what to do............
Can one kindly give solution for this.
Thanks,
Sony

Debug your generic DataSource, using RSA3, to determine why the delta failures are occurring. It's most likely in the delta logic portion of your custom Function Module.

Init with out data transfer option is not enabled

Hi Friends,
I am loading data from the data soruce 0CO_OM_OPA_7 - (Internal order items) into BI. This datasoruce is delta enabled. Flow is designed in 3.5. I checked the extractor RSA3, it shows 9 records and then i tried to load using init with data transfer, the load is not successful, it is in yellow for long time and gives the messages no record found. I tried with full load then load is successful. why init load is not successful? Is there any setting i am missing here?
Then I tried to go other option, run init without data transfer and then a full load, but I could not change the radio button to without data transfer option, it is defaultly taken init with data transfer and greyed out. How can i check init without transfer option?
thanks in advance.
Regards
Sreekanth

Hi,
In the present case you need to delete the earlier initialization flag from infopackage. Once done then you can be able to view the init without data transfer option.
So delete the flag in the menu bar --> Initialization option for source system
in the popup select the init entry and use the trash icon to delete the same.
Before doing that you can mark your earlier init load to Red and then perofrm this activity.
Once done then you can execute init-without transfer wiht no issue.
Once after this you can perform repair full load to load the data to your target.
Hope this helps.
Murali

Executing flat file loading map with parameter

Hi
The requirement here is to design a map that will :
- read a parameterised file from a pre-defined directory and load the data into a pre-defined table.
I want to be able a pass the file name ( eg. customers_060309.dat ) to the executing process .
The problem I am having is in connection with figuring out how to parameterised physical file names ( eg. customers_010109.dat)
which are held under source file modules .
regards
azaman

Hi
There are a couple of posts here you will find useful for some of this;
http://blogs.oracle.com/warehousebuilder/2007/07/process_flow_execute_a_map_for_all_files_in_a_directory.html
http://blogs.oracle.com/warehousebuilder/2007/07/process_flow_execute_a_map_for.html
Cheers
David

Load flat file into oracle with SQL Loader

Hi All,
Oracle 9i
I want to load flat file into oracle with the help of sqlloader but I want to skip some columns from flat file.
Can anyone tell me how can we skip column from flat file , I can’t open flat file into excel as CSV due to large volume
Does anyone has any solution for the same.
Umesh Goel

Filler can be use when we want to skip database table column or we want to put null in database table column
but if we have 10 column in flat file and we want to load 1,2,5,7 number column from flat file
then I think filler will not work
If yes then plz let me know.
thx
UG

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

Transformation not generating-Flat file loading

Hello guys, I hope you can help me with this little confusion I have on BI7 Flat file loading.
I got a File (CSV) on my workstation. I am trying to load Master Data. Here is the example of my file and issues:
Lets say, I have CSV file named "CarModel.CSV" on my PC.
This excel file has 10 Records and No atributes for this Field.
So the records should show like this and it is showing correctly in PSA level, DS level.
A
B
C
D
E
F
My goal is to load Flat file data to InfoObject (inserted in Infoprovider)
I created Source system, DS, all thats stuffs.
I am now on Display DS screen under Proposal Tab. I am putting 10 Records to show and hitting Load example data....it works fine by showing all 10 records. However in the bottom part of this screen, what should show as a Field ?In my case , First it was showing the First Record ("A")...i didnt think it was correct but i prceeded anyways. Transformation could not be generated.
I tried by deleting "1" from the field "No. of header rows to be ignored" and its the same result ..No transformations.. I mean i know its very simple to load this data but i am not sure what i am doing wrong..My question is:
1) What should show under Field/propasal tab in my case?am i supposed to create this Field?
2) Should the system to propse the field which is from my flat file header ?in my case i dont have any header..should i have include header in my csv file like "car model"? i am confused please give me some info thanks
dk

Hi,
In filed tab, u have to enter ur infoobject names in an order...and press enter it'll automatically give the description and its other factors...
i guess u shuld have some header in the sense eg: customer,cust ID like this..this only u have to enter as fields...in proposal tab...try that
rgds,

Initialize delta without data transfer not possible

Hullo,
I want to switch the upload procedure for an ODS from full to delta. For I have researched SAP Note 689964 and executed the program RSSM_SET_REPAIR_FULL_FLAG for the ODS-object and datasource. It successfully modified the request and set the 'REPAIR_FULL' flag.
Now I want to change the InfoPackage from Full update to Delta. According to the note I have to perform an init simulation, my problem is that the option initialize delta without data transfer is in display mode only (i.e. it's gray and I cannot select it).
The InfoSource in question is "0HR_PY_1". I've checked several others and with some it is possible to select the initialization simulations and with others it's not.
My questions are a) Why is it this option grayed out? and b) What can I do to enable the selection of this option?
Any help is appreciated.

Hullo AK,
thanks for pointing out that note, sadly it's for "0HR_PY_PP_1" and not "0HR_PY_1".
However it lead us to note '611199'...
Symptom
Some attributes of the following DataSources are not defined.
0HR_PY_1 DataSource:
- Commit after initialization phase
- DeltaInit Simulation
0HR_PY_PP_1 DataSource:
- Commit after initialization phase
0HR_PY_PP_2 DataSource:
- Commit after initialization phase
Other terms
PXDW, extractor, posting transfer, settlement, PCPO, PCP0
Reason and Prerequisites
The SAP settings for the DataSources are incomplete.
The following attributes should be set:
0HR_PY_1 DataSource:
- Commit after initialization phase: no commit
- DeltaInit Simulation: Mode is not supported
0HR_PY_PP_1 DataSource:
- Commit after initialization phase: no commit
0HR_PY_PP_2 DataSource:
- Commit after initialization phase: no commit
Solution
Import the corresponding Support Package into the Plug-In Releases 2003.1 and 2002.2 and copy/activate the DataSources in the plug-in system again.
If the correction is imported, you can no longer select the "DeltaInit simulation" option for the delta initialization of the 0HR_PY_1 DataSource/InfoSource.
As long as you have not imported the correction or you are using an even older plug-in release, you should never select the "DeltaInit simulation" option during the delta initialization for the 0HR_PY_1 DataSource/InfoSource. The 0HR_PY_1 DataSource does not support this mode.
The 0HR_PY_1 DataSource only supports the delta initialization (without the DeltaInit simulation) and subsequent delta calls.
Sadly enough, not what I wanted to read, but well at least I now know that I shouldn't look into this solution anymore.
Again, thanks for your help.

Infopackage Flat File load is failing to hierarchy after upgrade to 7.4

Hi Experts,
   My system got upgraded to 7.4 and SP level 0007. After Up-gradation my hierarchy load through Flat file is failing with short dump. Please find the dump details below.
Information on where terminated
    The termination occurred in ABAP program "SAPLRSSM", in
     "RSSM_CALL_RSAR_DATA_REQUEST_1". The main program
    was "RSAWBN_START".
    In the source code, the termination point is in line 5713 of (Include)
    program "LRSSMU17".
Did any one faced the same issue.Could any one givesome light on this.
Thanks in advance,
Sony.

Hello Sony,
I faced the same problem. I found out that in table RSLDPIO the entry for my Info Package had no entry for the field "source". In there must be the Info Object name the hierarchie belongs to. It can be entered using se80. After I typed it in, loading succeded.
regards
Hans-Peter

Activation of Objects with Type Data Transfer Process

Hi Experts,
I am stuck in a problem of activation of DTP. I loaded the data from the Datasource to PSA and there are about 200,000 reocrds.
Now I wanted to take this load to DSO NEW table ..I have created a DTP and when I try to activate the DTP I get this Error
Activation of Objects with Type Data Transfer Process
    Internal Activation (Data Transfer Process )
         Post Processing/Checking the Activation for Data Transfer Process DTP_49Z7OSAHFAR9O8335ED6
              Error when activating Data Transfer Process DTP_49Z7OSAHFAR9O8335ED67X11C.
I tried to activate the Data source but it still didnt help. Looked in SDN for some related stuff but most of them are talking about going for SP 11 ..we are already on
*SAP_BW     700     SAPKW70014     *
Your suggestion will be appreciated with maximum points
Thanks

Hello Experts,
Could you'll please help me out with this ...I
I deleted the DTP and created back again
logged out of BW and logged back again
Infact I found a SAP note 1086877 and i applied it ..but it still didint help
Whie loading the Master Data from PSA to DTP ..it worked fine.
While Loading the transactrion data I went to Tcode RSBATCH and in the drop down I selected the DTP activation and gave a 3 Back ground processes....Ever since that it started giving me problem
Your help will be appreciated...my data loads are stalled ..i mean I cant move forward.
Thanks

Best practise around handling time dependency for flat file loads

Hi folks,
This is a fairly common situation - handling time dependency for flat file loads. Please can anyone share their experience around handling this. One common approach is to handle the time validity changes within the flat file where it is easily changeable by the user but then again is prone to input errors by the user. Another would be to handle this via a DSO. Possibly, also have this data entered directly in BI using IP planning layouts. There is a IP planning function that allows for loading flat file data but then again, it only works without the time dependency factor.
It would be great to hear thoughts or if anyone can point to a best practise document for such a scenario.
Thanks.

Bump!

Unit Code, Commercial Code - Flat File loading vs BPS Loading

Hi SDN Community,
Recently, we have moved our flat file loading to be performed by BPS interfaces.
During flat file loads, the Commercial code of all units of measures, are verified.
eg.DAY
But when loaded by BPS, the UNIT code is verified.
eg. TAG.
In the display of the BPS upload, it displays DAY which is the commercial code.
The only thing, is the customer is forced to use TAG in the BPS upload files.
They wish to create another record in the transaction
CUNI to be
Unit code = DAY
Commercial code = DAY.
However, i have found that we cannot allocate the same commercial code to another unit code.
Is this a design constraint, or a process error that i am doing.
Thank you.
Simon

04.01.2010 - 02:22:53 CET - Reply by SAP
Dear customer,
As i do not fully understand how this works, but the base table T006A
has 2 entries, 1 for english, 1 for German, should it not be that the
English EN entry field be working rather that the German DE, hence DAY
should be used? Can you please confirm my understanding on this?
>>> If you check my attachment "SE16.xls", you can see that it's for
language >>English<<, and the internal format is TAG while the external
format is DAY.
- Are there any plans to modify the BPS functionality in newer SAP BW
versions to allow the customer to indicate the same UOM as per flat
file laods? Or is an upgraded Support Pack that allows this?
- If not, would it be possible to make any customer enhancements to
allow this to take place depending on customer requirements.
>>> There is no plan at this moment to change this BPS functionality
in newer SAP BW versions or support packages.
We really recommend you to use internal format TAG in the upload file
in BPS which I think should be acceptable and feasible to you. All
other ways trying to use external format is risky and we cannot assure
you that it will work well as it's not SAP standard function. (I think
it's not worth the risk as the standard function which requires
internal format should not be too unacceptable)
Thanks for your understanding.
I also don't think my BC-SRV-ASF-UOM colleague would be able to help
you a lot regarding this.
Best Regards,
Patricia Yang
Support Consultant - Netweaver BW
Global Support Center China
SAP Active Global Support

Partitioning is possible with data(1 lakh records) or with out data

partitioning is possible with data(1 lakh records) or with out data...if with data, its compulsory to stop database..and its not possible to stop, but i want to partitioning my table for increase the performance...what can i do please help me.

"lahk" is not an internationally recognised term. Please use terminology that is recognised internationally.
You could create a table with partitioning, copy your data into it, then drop the original table and rename the new one to the old name (bear in mind any indexes on it), though this isn't ideal if you have primary/foreign keys etc.
Also, ensure you are licenced to use Partitioning. It is installed as part of the database as standard, but you have to have additional licence to actually use it in production.

Can I use gps applications like tomtom at the ipad mini with mobile data transfer turned off?

Need help about ipad mini.
The information on the apple web page refers that only the 3G versions have gps capabilities.
Wath is not clear to me is if the gps works only when coneted with 3G data transfer, or it works without it, if I download some software like tomtom or navigon.
Best regards
Pedro

You can use it without being connected to 3G. Only the 3G/4G iPads have a built-in GPS chip, the wifi-only models don't, and you can use apps such as TomTom with it which contain the maps, you don't need to be connected to 3G (or even have activated 3G on the iPad) or wifi to then use it.

Flat File loading Initialize with out Data transfer is disabled in BI 7.0

Similar Messages

Maybe you are looking for