FLAT FILE LOADING INTO TRANSACTION CUBE

Hi Guru's,
I'm working on bps to load flat file into trasaction cube.
when i'm actiavting init Functin module, i'm getting the following error.
'IS NO COMPONENT EXIST WITH THE NAME PARNM'.
THE ERROR IS COMING WHEN THE FM IS READING FILE NAME.
tHANKS IN ADVANCE.

Hi Vijay,
Just check Function Module Parameters:
IMPORT: I_AREA        TYPE     UPC_Y_AREA
              I_PLEVEL        TYPE     UPC_Y_PLEVEL
              I_PACKAGE   TYPE     UPC_Y_PACKAGE
              I_METHOD        TYPE     UPC_Y_METHOD
              I_PARAM        TYPE     UPC_Y_PARAM
              IT_EXITP        TYPE     UPF_YT_EXITP
              ITO_CHASEL TYPE     UPC_YTO_CHASEL
              ITO_CHA        TYPE     UPC_YTO_CHA
              ITO_KYF        TYPE     UPC_YTO_KYF
EXPORT: ETO_CHAS TYPE     ANY TABLE
               ET_MESG       TYPE     UPC_YT_MESG

Similar Messages

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

One Time Flat File load in a Cube that extracts from ECC

Hi,
I have a cube that is already extracting data from ECC on a daily basis. I am asked to load some historical data into the cube from their legacy system. My question is, how do i prepare that file from the legacy system to match the fields in the Cube? What are the technicalities that i need to look at?
For Example:
0MATERIAL in the Cube: Material Number in the Flat File
ZAMOUNT in the Cube: Cost of Product in the Flat File
How do I arrange to match these?
Thanks

Hi
Create DS and enter the required objects
Preview the Data
Create Transformations (Map DS fields to Targets Objects - direct assignemnt)
Create Infopack and extract data upto PSA
Create DTP and run - it will extract data from PSA to Target
No of Heade rows to be ignored : 1
File type : CSV
Data seperator : ;
Escape Sign: "
Thanks,

Flat File loading into Hierarchy

Dear Gurus,
I am trying to load a hierarchy from a flat file. I am not able to do it successfully.
I have a small doubt. Do we need to load the master data into the master data table before loading the hierarchy?
Explanation:
I have an info object zcountry and i had added zzone and zstate as external characteristics in hierarchy. the hierarchy structure should be country with 2 nodes zone1,zone2 and zone one should have 2 states under it as nodes. In this case do I need to maintain the master data in the infoobjects before loading the hierarchies with flat file.?
<b>Node ID     InfoObject     Node Name     Link     Parent ID     Language     Short-Txt     Medium-Txt     Long-Txt</b>
1;     zcountry;     CountryNode;          0;     en;     CountryNode;     CountryNode;     CountryNode;
2;     zzone1;     SouthZone;          1;     en;     SouthZoneNode;     SouthZoneNode;     SouthZoneNode;
3;     zstate;     AndhraPradesh;          2;     en;     AndhraPradesh;     AndhraPradesh;     AndhraPradesh;
4     zstate     Karnataka          2     en     Karnataka     Karnataka     Karnataka
5     zzone1     NorthZone          1     en     NorthZoneNode     NorthZoneNode     NorthZoneNode
6     zstate     Haryana          5     en     Haryana     Haryana     Haryana
7     zstate     Rajastan          5     en     Rajastan     Rajastan     Rajastan
This is how the flat file looks like.
Kindly give me a solution.
Regards
Mohan Kumar.
Message was edited by:
        mohan kumar
Message was edited by:
        mohan kumar

Dear Gurus,
I also followed the same weblog but still i am not able to do that. That is the reason why I asked the question in that detail (with the data I am trying to load).
Regards
Mohan Kumar

Loading of flat file (csv) into PSA – no data loaded

Hi BW-gurus,
We have an issue regarding loading a flat file (csv) into PSA using an infopackage u2013 (BI 7.0)
The infopackage has been used for a while. Prior the consultants with SAP_ALL-profile have run the infopackage. Now we want a few super users to run the infopackage.
We have created a role for the super users, including authorization objects:
Data Warehousing objects: S_RS_ADMWB
Activity: 03, 16, 23, 63, 66
Data Warehousing Workbench obj: INFOAREA, INFOOBJECT, INFOPACKAG, MONITOR, SOURCESYS, WORKBENCH
Data Warehousing Workbench u2013 datasource (version > BW 3.x): S_RS_DS
Activity: All
Datasource: All
Subobject for New DataSource: All
Sourcesystem: FILE
Data Warehousing Workbench u2013 infosource (flex update): S_RS_ISOUR
Activity: Display, Maintain, Request
Application Component: All
InfoSource: All
InfoSource Subobject: All values
As mentioned, the infopackage in question, has been used by consultants with SAP_ALL-profile for some time, and been working just fine. When the super users with the new role are executing the infopackage, the records are found, but not loaded into PSA. The load seems to be stuck, but no error message occurs. The file we are trying to load contains only 15 records.
Details monitor:
Overall status: Missing messages or warnings (yellow)
Requests (messages): Everything ok (green)
-> Data request arranged (green)
-> Confirmed with: OK (green)
Extraction (messages): Errors occurred (yellow)
-> Data request received (green)
-> Data selection scheduled (green)
-> 15 Records sent (0 Records received) (yellow)
-> Data selection ended (green)
Transfer (IDocs and TRFC): Missing messages (yellow)
Processing (data packet): Warnings received (yellow)
-> Data package 1 (? Records): Missing messages (yellow)
     -> Inbound processing (0 records): Missing messages (yellow)
     -> Update PSA (0 Records posted): Missing messages (yellow)
     -> Processing end: Missing messages (yellow)
Have we forgotten something? Any assistance will be highly appreciated!
Cheers,
Anne Therese S. Johannessen

Hi,
Try to use the transaction ST01 to trace the authorization of the upload with the SAP_ALL.
And the enhance your Profile for the super user.
Best regards
Matthias

Interface used in loading flat file data into bw

what is the interface used in loading flat files into the bw system.

HI Flat file load is its own interface. It leverages the S-API (Service API), the standard interface that is used to load data in the BI system.
Start from this point:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03450525ee517be10000000a1553f6/frameset.htm
Thanks for any points you choose to assign.
Regards -
Ron Silberstein
SAP

Load flat file data into ODS in BI

Dear Gurus,
How to load flat file data into ODS?. Please share the article if you have.
advance wishes
Thanks
Venkadesh

Please search the forums before posting :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60debae1-84dd-2b10-e7bf-bdedf1eabdf9
http://wiki.sdn.sap.com/wiki/display/BI/Beginner+Section

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Flat file load changes in key figures

Hello,
I have a weird issue when i try to load some data into a cube(Flat File) with 1900 records only 1668 records gets loaded into the cube and also when i try to validate it the numbers doesnt match.Can you guys suggest me if i am missing anything here.Do i have to double check anything.Please let me know.Any help greatly appreciated.
Thanks,
Vinay

nothing problem for your cube model.
there are some records with same charectertic values. you can validate it, calculate sum of 1 KF in cube and calculate sum of 1 KF colomn. you can compare both values.
both values should match.
assume...flat file data
customer   amount
<b>1000            10</b>
1001            20
1002            30
<b>1000            10</b>.
cube will have
customer   amount
<b>1000            20</b>
1001            20
1002            30
hope this helps.
Nagesh.

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

Unit Code, Commercial Code - Flat File loading vs BPS Loading

Hi SDN Community,
Recently, we have moved our flat file loading to be performed by BPS interfaces.
During flat file loads, the Commercial code of all units of measures, are verified.
eg.DAY
But when loaded by BPS, the UNIT code is verified.
eg. TAG.
In the display of the BPS upload, it displays DAY which is the commercial code.
The only thing, is the customer is forced to use TAG in the BPS upload files.
They wish to create another record in the transaction
CUNI to be
Unit code = DAY
Commercial code = DAY.
However, i have found that we cannot allocate the same commercial code to another unit code.
Is this a design constraint, or a process error that i am doing.
Thank you.
Simon

04.01.2010 - 02:22:53 CET - Reply by SAP
Dear customer,
As i do not fully understand how this works, but the base table T006A
has 2 entries, 1 for english, 1 for German, should it not be that the
English EN entry field be working rather that the German DE, hence DAY
should be used? Can you please confirm my understanding on this?
>>> If you check my attachment "SE16.xls", you can see that it's for
language >>English<<, and the internal format is TAG while the external
format is DAY.
- Are there any plans to modify the BPS functionality in newer SAP BW
versions to allow the customer to indicate the same UOM as per flat
file laods? Or is an upgraded Support Pack that allows this?
- If not, would it be possible to make any customer enhancements to
allow this to take place depending on customer requirements.
>>> There is no plan at this moment to change this BPS functionality
in newer SAP BW versions or support packages.
We really recommend you to use internal format TAG in the upload file
in BPS which I think should be acceptable and feasible to you. All
other ways trying to use external format is risky and we cannot assure
you that it will work well as it's not SAP standard function. (I think
it's not worth the risk as the standard function which requires
internal format should not be too unacceptable)
Thanks for your understanding.
I also don't think my BC-SRV-ASF-UOM colleague would be able to help
you a lot regarding this.
Best Regards,
Patricia Yang
Support Consultant - Netweaver BW
Global Support Center China
SAP Active Global Support

Flat File loading Initialize with out Data transfer is disabled in BI 7.0

Hi experts,
When loading through flat file in BI 7.0 for Info Package Level Initialization Delta Process with data Transfer is coming by default,but when i want to select Initialization Delta Process without Data transfer is disabled. (in the creation of Data Source (flat file) in the Extraction Tab Delta Process is changed to FIL1 Delta Data (Delta Images).
please provide me Solution.
regards
Subba reddy.

Hi Shubha,
For flat file load please go throught he following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/03450525ee517be10000000a1553f6/frameset.htm
This will help.
Regards,
Mahesh

How to store the flat file data into custom table?

Hi,
Iam working on inbound interface.Can any one tell me how to store the flat file data into custom table?what is the procedure?
Regards,
Sujan

Hie
u can use function
F4_FILENAME
to pick the file from front-end or location.
then use function
WS_UPLOAD
to upload into
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'   "Function to pick file
    EXPORTING
      field_name = 'p_file'     "file
    IMPORTING
      file_name = p_file.     "file
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                       = p_file1
    TABLES
      data_tab                      = it_line
*then loop at it_line splitting it into the fields of your custom table.
loop at it_line.
          split itline at ',' into
          itab-name
          itab-surname.
endloop.
then u can insert the values into yo table from the itab work area.
regards
Isaac Prince

How to write plan data into Transactional Cube from Visual Composer ?

Dear experts,
Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
But I am not sure how to save the changes back to transactional cube from VC.
Could anyone please kindly advise how to achieve this.
"Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
Many thanks,
Sen

Hi Sen,
As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
Regards,
Enrique

Refer to an object in Edge from an onclick="" in a .html file loaded into an iFrame in the animation

HI, I am trying to figure out the Edge hierachies by stumbling my way through coding reference attempts. I've hit a wall...
How can I refer to an object and a global function in my Edge animation from an onclick="" located in an .html file loaded into an iFrame created within the master/parent Edge animation. Here's what I have...
My main index.html is an Edge animation. One object <div> is a box created within Edge. I have added an iFrame with the Edge code:
sym.$("MenuPanelScreen").html('<iframe src="list_images_cemetery.html" width="267" height="670" sandbox="allow-same-origin allow-scripts allow-top-navigation"></iframe>');
That .html file which loads into the iframe within the animation contains thumbnails in <a> tags and contain onclick="" statements that should call a function within the Edge file.
Eventually, I want the statements to read something like... onclick="changePic('Dragon.jpg', 'The Dragon', 'Saint and Worm')"
However, I had no idea how to reference the changePic() function in the Edge animation. So, just to figure out how to reference the parent animation from an html in an iFrame, I change the onclick="" statements to...
<a onclick="alert('Try to hide Nameplate'); sym.$('NamePlate_sym').hide();" > <img src="gallery/TheyGaveUpTheirDead.jpg" width="80" alt="Angel and Worm" /></a>
I first wanted to see if I could hide an Edge Symbol or div/element from the child html. I tried the following...
onclick="alert('Try to hide Nameplate'); sym.$('NamePlate_sym', window.parent.document).hide();"
I tried a few other variations that I won't bore you with. Can someone help me with the proper reference to effect an Edge element?
Furthermore, I eventually wnat the onclick="" statement to reference a global function on attached to the Edge stage in the compositionReady event of the stage. The function is...
window.changePic=function(myFileCurr, myLabelCurr, myDescriptionCurr) {
alert("in changePick");
document.getElementById("myImage").src="gallery/"+myFileCurr;
document.getElementById("myImageLabel").innerHTML=myLabelCurr;
document.getElementById("myImageDescr").innerHTML=myDescriptionCurr;
I hope someone can point me in the right direction. Please forgive my ignorance. i am just getting back into coding and learning the intricacies of Jscript and jQuery. Thanks!

Hi again Elaine,
I actually had some success after many attempts with using your code. I can control the .stop() and .play() of the "NamePlate_sym" symbol. Yet, I am still having trouble doing anything else with it. I cannot .hide() it, nor use .html("Change text") on another element on the stage called"Rectangle". If I can accomplish that and all a global function on the stage, I'm in good shape.
I placed the following script in the header of the .html file that gets loaded into the iFrame within the Edge composition:
<script type="text/javascript">
   window.parent.AdobeEdge.bootstrapCallback(function(compId) {
   comp = window.parent.AdobeEdge.getComposition(compId).getStage();
   alert("CompID is "+compId);
   var symbol = document.createElement('div');
   symbol.innerHTML = 'Rotate';
   symbol.style.cssText = 'background-color:#fea; width: 50px; text-align: center;';
   symbol.style.cursor = 'pointer';
   symbol.onclick = function() {
    if (comp.getSymbol("NamePlate_sym").isPlaying()) {
     comp.getSymbol("NamePlate_sym").stop();
    else {
     comp.getSymbol("NamePlate_sym").play();
   window.parent.document.body.appendChild(symbol);
        </script>
Once I put window.parent. in the first two lines of code and the last, my test worked. As I mentioned earlier though, I still can't get the syntax correct to .hide() an element (i.e. comp.getSymbol("NamePlate_sym").hide(); does not work), or more importantly, change the innerHTML value of an element on the stage. The code either does nothing or freezes.
Thanks... Tommy

FLAT FILE LOADING INTO TRANSACTION CUBE

Similar Messages

Maybe you are looking for