Flat File Upload Error
Hi All,
I am using BW version 3.5 SP 16.
I am trying to load a flat file in to BW. I am loading it to an info object char with direct update. Everything is in capital letters char length and evrything is matched. But I am getting an error.
In monitor it says
Message no. RSM2704
Diagnosis
Data records in the PSA were marked for data package 1. Here there were 8 errors. The systemwrote information or warnings for the remaining data records.
and in ST22 it says:
TYPELOAD_NEW_VERSION
data type "/BIC/CCABZMATL_ATTR" was found in newer version than required.
What does the error means?? Our BW System is new and there is noting in it. Are there any settings in SPRO that I am missing??
Any help is appreciated.
Regards
Hi Ninad,
Your transfer structure is not in the last version. That's why you need to delete a source system assignment to infosource. During this operation the PSA structure (which is responsible for a correct data transfer from the source system to BW) will be deleted.
If you use a flat file datasource, then if you try to assign the source system again, the system will use the same, old transfer structure, because it keeps information about even deleted things during a session.
That's why you need to log out the system.
After the new log in, assigning the flat file datasource and activating the transfer rules will create the proper structure.
Creating a new infoobject as data target, without deleting the source system first (as you did) won't work.
Hope it's clear now.
Best regards,
Eugene
Similar Messages
-
BPS Flat File Upload Error Messages
Hi,
I am using the BPS flat file upload and am getting error messages. These error messages are coming from the user exit in the characteristics relationships. Unfortunately the message does not indicate which line on the upload file the error is for. In the user exit it does not pass the line no of the flat file that is being processed.
Does anyone have any ideas how the message could be enhanced to indicate the line in error or if there is another exit I could perform the validation in?
regards
Paul CairncrossHi Sai,
The issue is not the particular message. The message is in fact my message in the user exit in the characteristic relationships. The issue is when using the flat file upload the message does not indicate which line in the file the message apply's to. Looking at the userexit no line number is passed. This is not a problem in the web as the specific line is highlighted when the user is keying in the data.
Regards,
Paul Cairncross -
Flat file upload error message
Hi Friends
I have designed an infocube and when i try to load data after selecting the option of flat file upload, i get the following error message," You have no authorization for basic types(activity 03)". Please clarify what it means.
regards
krishi Kris,
it may due to lack of authorization, please run transaction su53 and capture the info to your basis team to add you the needeed authorization.
hope this helps. -
Beginner - Flat file upload error Help Please
Hi Everyone,
I am trying to upload a flat file [.csv] for the first time.
I created Info objects Material Id, Material Name , Price as keyfigure.
Material Id holds Material Name and Price as attributes and is With Text and With Master Data.
For the Keyfigure, Price, I have selected Amount and defined as USD.
In the flat file, i have Material id, Material Name, Price, Description for Text, its something like this
Mid M-Name Price DESCRIPTION
10001 A 99.99 AA
When I create an Application Component and thereafter create a data source for master data attributes for Material
and select the flat file and upload it, then the data types for Keyfigure PRICE changes to FLTP Length 16, its no longer as DEC and i get some werid data for Price field, something like
"99.990000000001E+02" instead of 99.99. Why am I having this problem and how could this be resolved ?
I thought i would start off with my best foot forward but it didnt work. Any kind of help would be highly appreciated. Thanks guys..Byeehi,
these are the BI.7 steps
BW 7.0
Uploading of master data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
1. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
2. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to select Insert Characteristics as info provider
u2022 Select required info object ( Ex : Employee ID)
u2022 Under that info object select attributes
u2022 Right click on attributes and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
BW 7.0
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
5. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
6. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( Transaction data )
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
7. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to create ODS( Data store object ) or Cube.
u2022 Specify name fro the ODS or cube and click create
u2022 From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
u2022 Click Activate.
u2022 Right click on ODS or Cube and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
8. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
if it is helpful assign points
cheers
sivaRaju -
Hi Marc,
I am following the July version of how-to. When generating the BSP page, I am told checkbrowser.htm and js.htm are not available. When I create a checkbrowser.htm and point the include to js3.htm, which is one of the page fragment available, there are a few other errors coming out. What am I missing?Do you already know if the flat file upload is possible from a multi planning area? Because I get the error message that my multi planning area does not exist when executing the function.
Thnx. -
Image / file upload error cannot upload image even after setting write permissions
Hi there everyone
I am having this problem when I try to upload a file (image file) to my server
I have a dynamic for working fine , all the other fields insert the information ok then I try to add an image upload behaviour to a file field
When I try to upload the file I get this error
Error:
An error occurred while inserting the records.
File upload error: File upload error. Error creating folder..
File upload error. Internal error.
Developer Details:
tNG_multipleInsert error.
An error occurred while inserting the records. (MINS_ERROR)
File upload error: PHP_UPLOAD_FOLDER_ERROR
File Upload Error. No write permissions in "../../productimages/" folder.
(FILE_UPLOAD_ERROR)
So I login to my server and change the write permissions to 777 and then try again and get the same message
I have closed DW and tried again and still get the same message......
I think I have followed all the steps correctly..... I have done the same type of forms many time and tested them locally on WAMP testing server and all work ok......
So..... Anyone got any ideas
Any help would be great
Have a nice dayOn 5/17/07 4:26 PM, in article [email protected],
"Gü[email protected]" <> wrote:
>
> To my experience servers behave differently -- on some I really had to use
> 777, others are happy with 755.
>
> in regards to "any user" :: On most ADDT respectively MX Kollection - based
> backends I made the image & file upload feature available to user having e.g.
> the "levels" 1 & 2, but not 3 -- I wouldn´t expose something like this to all
> users
>
> Günter Schenk
> Adobe Community Expert, Dreamweaver
My backend is only for admin, so they are the only ones who can access the
upload pages. My concern is an images folder on the site being 777. Can't
anyone from the outside plant a file in that folder if they just know where
to find it using an ftp program? ? -
Problem in Flat File Uploading
Hi everyone
During a flat file uploading, I get a message for each record of my SKU (Stock Keeping Unit), for eg for SKU 1017023, I got a message
<b>Value '1017023 ' for characteristic PISKU is in external format RRSV 9</b>
PISKU is the field name.
The whole extraction is failing.
Kindly provide me some suggestions as soon as poosible!!
If possible mail me at
[email protected]
Regards
Gajendra SinghHi,
It seems there is a space in the value '1017023 '.You have to edit in PSA and then send it again else delete the request and change the flat file entry and reload the data.
Hope this helps
Assign points if useful
Regards,
venkat -
How To guide...for Flat File upload for User-Defined variables
Has anyone got link to the guide that describes how to do a flat file upload for populating User-Defined Variables ?
Any assistance will be appreciated.
UcheSAP BW Business Planning and Simulation "How To" Guides
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ab9fd590-0201-0010-2590-be78eb70015c
How to Upload User-Specific Variable Selections in BW-BPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to upload user-specific variable selections in bw-bps.pdf
this is what you are looking for ?
Message was edited by: Murali -
Create a flat-file upload for a BO XAI Inbound Service?
Hello all,
If we don't have a schema defined for a BO XAI Inbound Service, how can we create the XSL and the flat-file upload schema file for it.
Any advice?
Regards,
KerrI don't have problem to create the XSLT mapping.
But because it is to create a flat-file upload for a Business Object XAI Inbound Service, it doesn't have a schema on the server as to the thread Create Schema for Business Object to use for XAI Inbound Service?
And I can't create that flat-file upload without a schema on the server.
Or I can use the BO XAI Inbound Service WSDL instead to create the mapping for the flat-file upload.
Regards,
Kerr -
Hi,
What kind of questions are needed to be asked (from client) for requirements gathering for a flat file upload (from legacy system) to BI? Basically what are all the questions that i need to ask them to make sure I have all information for designing a flat file extractor?
ThanksI would ask them what do they want to report on from the legacy system and is data already in R/3? I would also ask what kind of data is stored in the legacy system .... inventory, financial data, sales, etc ... Once I knew that, I would ask what do they want to report on .... stock quantities/costs, gl account data, revenue, deliveries, etc....
Then I would ask, do you want this to be seperated from the R/3 datastream? More than likely this will be yes, if not, fight to keep it seperated and possible in it's own cube/ODS and combine in a multiprovider (you need to use the same 0material, 0customer, 0vendor, 0gl_account info objects if you want to combine nicely on a multiprovider).
If the database the legacy system is on is either SQL Server or Informix or Oracle, you may want to consider DBConnect and connect directly to their tables.
In all cases, I try to avoid bringing everything in "just because we may need it". If the system is legacy and it's been a legacy for 2 years, see what people keep going back for and grab that data only. If someone claims to need data, but have not sought it out for 2 years, then the probably don't need it.
Also, check the granularity of the data. Do they need individual documents for legal reasons? Can you summarize the data? What are they going to use the data for?
Brian -
BPC delta flat file upload possible?
Hi experts,
Ive been trying to find an answer of whether or not it is possible to retain member data on manual flat file upload into a dimension. We have created a dimension (employee) and have created some dummy nodes member data and would like to determine if it is possible to then keep this manual member data while manually loading further member data through flat file load. Is this sort of manual flatfile delta load possible? If so how? What is best practice here?
Also, is it possible to load data into a dimension using two methods IE manual upload file and then another form (IE BW load) without overwriting data? Im assuming this is where the merge data option comes in to play.
Any guidance would be much appreciated.
Regards,
DanielleHi Danielle,
While uploading data, if you have added dimension members manually, then, it never gets deleted untill and unless you specify for it.
In your scenario, you have created dummy members and want to upload data thru flat file. Then, the data will be uploaded only for those members for which you want to upload data, rest of the members will display the old data.
As you rightly said earlier, while running data manager package, you need to select MERGE option instead of REPLACE & CLEAR data values. This keeps the old data intact and adds the new ones as well.
Hope this clarifies further.
Rgds,
Poonam -
I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?
Could you take a screen shot of the error message and post it?
Can you export a master file OK?
Russ -
File upload error: Error uploading file. Error moving uploaded file from temporary folder. (FILE_UPL
what causes this error:
File upload error: Error uploading file. Error moving uploaded file from temporary folder. (FILE_UPLOAD_ERROR)On 5/17/07 4:26 PM, in article [email protected],
"Gü[email protected]" <> wrote:
>
> To my experience servers behave differently -- on some I really had to use
> 777, others are happy with 755.
>
> in regards to "any user" :: On most ADDT respectively MX Kollection - based
> backends I made the image & file upload feature available to user having e.g.
> the "levels" 1 & 2, but not 3 -- I wouldn´t expose something like this to all
> users
>
> Günter Schenk
> Adobe Community Expert, Dreamweaver
My backend is only for admin, so they are the only ones who can access the
upload pages. My concern is an images folder on the site being 777. Can't
anyone from the outside plant a file in that folder if they just know where
to find it using an ftp program? ? -
'File is not open' error when running DTP for flat file upload in BI
Dear Sir,
We are trying to upload master data from flat file for which we have
created respective DTPs. When we are running the DTPs we are getting an
error saying 'The file '&&filepath&&' is not open'. We also checked
that the file is not open, but still we are getting this error. Could
anyone please suggest what we have to do to solve this problem.
Many Thanks
NarendraHi,
I am currently facing the same error "Error in Source system". "The file 'path' is not open".
Could you please let me know how you resolved this issue.
many thanks.
Regards,
Madhusudhan -
Dear All,
I am uploading from a flat file source system and it give me an error saying IDOC type for sourcesystem is not available is this purely an basis problem or is there anything I can do about it.
Thanks &Regards,
Vinay.Hello,
Check the Log in sm21 (for all servers). Did any short dumps reported for the failure (st22).
what exactly is the error reported in RSMO?
Please give us error in detail.
Thanks and Regards,
Harish
Maybe you are looking for
-
IPod Touch 5th Gen NO SOUND!!!!!!
My iPod 5th gen displays & seems to be running but it has no sound, but the sound is perfectly fine when im using earphones. I have tried the reset and/or restore but doesnt change a thing, I think this happened 2 weeks after updating to iOS 7, i don
-
External hard drive not picked up
Hi there, I have a Macbook Air 2012, I have been using a ADATA Nobility external HD with it from the start. Now out of the blue my mac does not want to detect it. I have looked for it under disk utility etc etc. but still can't find it. I have return
-
I have connected my ipod to my tv using an av cable from my portable dvd player. From what I have read elsewhere on these forums, it isn't odd that it won't play on my tv, but when I turn the tv signal to "on" the video turns all green and the sound
-
Good Morning! I wanted to insert some xml Data into my Orcale XML DB: First of all I registered 2 Schemas required for the XML, like this: Begin DBMS_XMLSCHEMA.registerSchema( schemaURL => 'Mailpiece_Processing/oif_dtypes', schemaDoc => bfilename('XM
-
I need a help to write the query
Id Child Parent Is Sub Parent Is Parent 1 chld1 y 2 chld2 chld1 y 3 chld3 chld1 y 4 chld4 chld1 5 chld5 chld2 y 6 chld6 chld2 7 chld7 chld5 8 chld8 Q: please check the above table, id no 1-7 are linked with parent and id no 8 is independent child, i