Flatten, risize, in which order before applying the digimarc?

That is the question.

we can do calender using the javascript,
i want to develop the calender with out using javascript
just using the servlets and jsp

Similar Messages

Back up your iCal files before applying the Mac OS X 10.4.4 Update

It seems as though this sort of thing should not happen, but the mere application of the Mac OS X 10.4.4 Update - in small but noticeable ways - damaged my existing calendars, rendered a subscribed calendar effectively unsubscribed, and the Birthdays calendar present but empty. Neither of these calendars were actually removed: they just appeared devoid of data.
Because I had previously backed up the calendars using the Back up Database… option in iCal before applying the update, I simply restored them to fix the issues in the standard calendars.
To fix the subscription problem, I had to unsubscribe, then re-subscribe to that calendar.
To fix the Birthdays calendar issue, I simply had to launch the Address Book, remove a birthday in one record, exit the edit mode, then paste it back in. Instantaneously, the Birthdays calendar was populated with data once again.
Does anyone actually test these updates before they are released? [Facetious question, I know - but one does have to wonder…]
PowerBook G4 12 867 MHz 640 meg 40 gig SuperDrive Mac OS X (10.4.3) What problem? I use the The Missing Sync for Palm OS

You have limited options:
1. If there is an Apple retailer nearby you can have them copy the update to a CD for you - usually at no or nominal charge.
2. You can go to a local Mac user group (if there is one in your area) where they would be happy to provide a copy of the update for you on a CD at no or nominal charge.
3. You can find another Mac user who has a high-speed connection and can download the update for you.
4. You can call AppleCare and order a copy of the update on CD for a charge of (I think) around $9.95.
5. You could find a Mac owner somewhere who would copy the update to a CD and mail it to you at any negotiated cost. However, do not solicit this assistance on these forums. Of course anyone reading this post could offer their help.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update.

When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."

What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.

Mac users: back up your site definitions before applying the 11.0.2 update

The 11.0.2 update to Dreamweaver CS5 is intended to fix the problem with FileVault on Mac OS X. I don't know the full details, but I presume that it locates the program settings in a different place or rebuilds them. Unfortunately, this has the effect of deleting login details for sites you have set up in Dreamweaver. Make sure you back up your site definitions before applying the 11.0.2 update on a Mac.
The update doesn't affect site definitions on Windows (at least, not in my experience).

One could also try a machine restart after the patch has been successfully applied.

Any FM or BAPI to Release Service Order before creating the Adv Ship Order

Is there any Function Module or BAPI to Release Service Order before creating the Advance Shipment Order.
or is there any other alternative to release Service Order.

Hi,
Try BAPI_ALM_GET_PROP.
Regards,
Chandra

Set deletion flag for Order before releasing the order

Hi all,
can we set the Deletion Flag for an order before release of that order.
Regards,
Bhanu.

Hi,
You can lock and unlock order without releasing.
In case of Un execute we can not release order further.
Path:
ORDER-FUNCTION-LOCK
order-function-unlock
Regards,
Sudhakar

Does it matter in which order you install the creative cloud if you have two computers?

I have a mac book pro and a windows 7 computer.
Does it have any effect on the usage?

No.

User Exits for transaction VF01 before saving the billing document

Can any one say is there any user exit which exits before saving the billing document since i want to check the net value of the billing with the net value of sales order so that it should not go beyond the total amount specified in sales order.

J_3RSINV
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
These are the Exits Available in the Package
Jus try finding which will suffice ur Requirement.
Regards,
Mithun

Is there a batch process for opening multiple raw images and applying the same, stored preset?

I often have multiple exposures of the same subject, which I would like to treat identically. At present I have to open each one individually in Camera Raw, apply the preset, save, go on to the next, etc.
Looking for a way, if there is one, to select them all, in order to apply the preset to all at once. Or perhaps there may be a scripting method to allow this?

Which version of photoshop, camera raw and operating system are you using?
You should be able to open all the images inside camera raw, Select All (upper left of the camera raw dialog above the filmstrip of open images) and then apply the settings to all the selected images.

How to skip EGO product before applying patch 9239090 (12.1.3)

Hi All,
i am applying patch 9239090 (12.1.3) on my system OUL5x64 EBS 12.1.1 db:11.1.0.7
when upgraded to 12.1.1, got error on EGO product and i had to skipped this product because we do not have it installed and now upgrade to 12.1.3 got the same error on this product.and had to skip this product again.
here is the error:
sqlplus -s APPS/***** @/TEST/apps/apps_st/appl/ego/12.0.0/patch/115/sql/EGOSILDU.sql &un_ego
DECLARE
ERROR at line 1:
ORA-02149: Specified partition does not exist
ORA-06512: at line 408
question:How can i disable this product before applying the patch 9239090 so the upgrade process can continue un-interrupted.
Thanks in advance.
Regards,

is there any ways that i can do it before apply the patch 9239090 so the process will not require user interact. we patch the system at night and if it fails, we will waste few hours till the morning before it can continue running again.The only way would be commenting the line in the patch driver which initiates EGOSILDU.sql script (if possible), but this is not supported by Oracle Support.
Thanks,
Hussein

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro?

I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro? If so, which Compressor codec is best to use in order to preserve the original 720/60p? How do I maintain the highest quality?

No...ProRes is a high quality format. Finishing format. Many TV networks take that as a final deliverable.
BUT...DVDs aren't high definition...they are SD. You cannot make a 720p60 DVD with DVD Studio Pro. Any DVD you make will be SD...720x480. The only HD DVD format out there is BluRay, and for that you need a BluRay burner.
As for making a high quality DVD...using the BEST QUALITY settings in Compressor will work:
#42 - Quick and dirty way to author a DVD
Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
1. Export a QT movie, either a reference file or self contained using current settings.
2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
3. Select the left blue one and hit delete.
4. Now, select the green one, right click on it and select the top option "first play".
5. Now drag your QT from the browser and drop it on top of the green monitor.
6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
THATS ALL!!!
NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing. Then take THAT result into DVD SP and follow the rest of the steps. Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Which patchsets to apply before 11.03 - 11i upgrade?

What is the best way to find out which patchsets I need to apply before beginning the upgrade from 11.03 to 11i? We are running Government Financials and we are only on patchset D for most modules including FND. I am fairly new to apps and am getting very frustrated trying to determine how to get this information. It is my understanding that the patchset levels need to match up and you can't go a lot higher on one module without patching the others... additionally we do have several bugs especially in Purchasing.

Hi.
I hope it's help:
http://docs.oracle.com/cd/E26505_01/html/E28038/preconfig-17.html#luplanning-7
Ensure that you have the most recently updated patch list by consulting http://support.oracle.com (My Oracle Support). Search for the knowledge document 1004881.1 - Live Upgrade Software Patch Requirements (formerly 206844) on My Oracle Support.
The patches listed in knowledge document 1004881.1 - Live Upgrade Software Patch Requirements (formerly 206844) on My Oracle Support are subject to change at any time. These patches potentially fix defects in Live Upgrade, as well as fix defects in components that Live Upgrade depends on. If you experience any difficulties with Live Upgrade, please check and make sure that you have the latest Live Upgrade patches installed.
If you are running the Solaris 8 or Solaris 9 OS, you might not be able to run the Live Upgrade installer. These releases do not contain the set of patches needed to run the Java 2 runtime environment. You must have the recommended patch cluster for the Java 2 runtime environment recommended to run the Live Upgrade installer and install the packages. To install the Live Upgrade packages, use the pkgadd command. Or install, for the Java 2 runtime environment, the recommended patch cluster. The patch cluster is available on http://support.oracle.com (My Oracle Support).
For instructions about installing the Live Upgrade software, see Installing Live Upgrade.
Required patches available via MOS ( My Oracle Support: http://support.oracle.com).
But for access to this site you must have active service contract.
Regards.

How can read BOM component date before save the production order??

Hi Experts,
In our company, we need to develop a program to read the BOM component data of the production order
before we save the production order.
That for example ,when we create and release a production order , before we save the production
order,we want a porgram to read the BOM component data. If some component data can meet our
requriement (may be if there is material requirement quantity>100 EA),then the system will pop up a
small dialog box to remind us.
There is user exit PPCO0007 and PPCO0007.But it seems they only can read the head data of the
production order before we save the production order. And the BOM component data of the production
order are saved in the RESB(Reservation Table).So if we do not save the production order,all the BOM
component data are not saved in the RESB table.
So how can slove the problem??
How can read component date before save the production order??
Are there any other user exit we can use???

Hi Just wanted to check am I right that you are trying to check if you have enough Materials Available before you release or Save the order right ? if this is your business objective then when you create order you have material availability tab which checks and gives error if shortage is there. Please let me know if is this wht you asking for ?

Flatten, risize, in which order before applying the digimarc?

Similar Messages

Maybe you are looking for