Flattened png. files only render in black and white

Hi,
I have been working with fireworks on a daily basis for over
a year now, and I have never come across this problem. I think it's
either a setting, or I have some sort of bug. But here's whats
going on: I design websites and so I use lots of .png files
(flattened of course) Recently all of flattened png files are
rendering only in black and white. By that I mean I save them in
color, and then when I save them they turn black and white, and I
can only tell this once I reopen them. Even if I go into the
options section when you are saving a doc, and I can choose the
format, and then underneath that the palette, the palette itself is
somehow always set to grayscale, and so I will change it to web
adaptive which is my usual setting. Has anyone had this problem
before. The only way around it that I have found is by first saving
my project as a jpg, and then going back into fireworks and then
saving it as a flattened png.

When installing the new cartridges, did you get the message "Original HP cartridges have been installed"?
Can you check the ink levels and actually see the been color displayed?
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Similar Messages

Envy 7640 only prints in black and white

New ENVY 7640 all-in-one is only printing in black and white. Test page prints in full color. When clicking on a file to print, the image turns to black and white even before printing.
Have removed Airprint.
Thanks for any help!
This question was solved.
View Solution.

Hi,
Click the Apple icon and select Software Update. Clcik teh top Store menu and select Reload This Page.
If there is any HP update be sure to install it.
Next open Printers & Scanners, remove the printer and click the plus sign to re-add it.
If the same persists, please have a look what is listed within the Use drop down menu while adding the printer.
As well be sure to confirm you OS version by clicking the Apple icon and then About This Mac.. what is the exact listed version number?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Artwork only displays in black and white when adding to a song

Artwork when importing JPG only shows in black and white. Old artwork is OK in colour previously imported. Note these are for non-ITunes store purchased.

Never heard of that before!
Does it show up OK in Windows Media Player?
WARNING
You might want to set WMP options before you let it loose on your itunes content.
It doesn't matter if you never use WMP - its default settings allow webpages to open WMP in the background without you even knowing, and get info from the internet.
You need to turn this auto-update "feature" off in WMP in 4 places.
Player tab: everything unchecked so WMP won't touch your files
Library tab: everything unchecked, esp the box to retrieve info from the internet
Privacy tab: everything unchecked, esp the box to update files
Security tab: everything unchecked so web pages can't launch WMP in the background
You also need to check these 4 settings after every windows update that includes a WMP update, because it has reset them back to some of the defaults, I have noticed.

Why will my photos only print in black and white?

My computer crashed a while ago and I had to re-install my photoshop elements 6. Since then, photos will only print in black and white through elements, even though they'll print in colour through other programs on my computer. This must be a settings issue in the elements program but I can't find anything that seems to work. Any help would be greatly appreciated!

Hi toxryan,
Thanks for taking the time to help. Issue definitely not resolved.
In Organiser there is no direct print link so I click on 'file' then 'print'. There are no relevant options in the print box - options only deal with type of printer, size of paper etc. If I try 'page setup' there are no relevant options. If I try 'more options' the only mention of colour is 'colour management' where it asks if I want print space same as the source etc.
This is driving me mad. Any ideas?
Thanks
Heather

HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

Check the printer itself. Some printers you need to set the color & B&W settings on the printer itself instead of the Mac. If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one.

Mini DV to Video only shows in black and white

I bought a mini dv to video from an apple shop so that i could watch films on my tv. I connected it to my tv at home and it worked perfectly, but when i try to connect it to my parents tv it only shows in black and white... both tvs are of roughly the same age...I'm connecting the yellow wire to the scart on the back of the tv to the yellow socket on the adapter
how come it works on one tv and not the other one?

When you press the INPUT button on the remote to cycle through the inputs, is "ColorStream HD" listed? Is "Video" listed?
The Xbox is connected using 5 cables, correct? Red, blue, green, white, and red?
- Peter

Laserjet 4700 only printing in black and white on windows7 systems

I have an HP Laserjet 4700 printer (Model Q7493A). It works perfectly fine in XP. When I have attempted to install it on a windows 7 system, it will only print in black and white.
I have downloaded the current universal print drivers from the HP website
I have other printers of the same model which don't have the problem.
I have tested this printer on other win7 systems and have recreated the issue.
It looks like for some reason this printer is only installing the Black and white drivers from the universal print driver.
Anyone have any thoughts?

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

RGB Only Prints in Black and White

My Illustrator CS3 seems to have developed a strange problem. If I create a new RGB based document, a 'Web Document' or a 'Basic RGB Document' for example, and the print it, I only get a black and white print. If I create a CMYK based document it prints just fine. I have also tried creating a CMYK document and converting it to RGB and that prints fine too, but if I create an RGB document and convert to CMYK again I get a black and white print.
I have checked each of the colour profile and print dialog boxes to see if there are any differences bewteen a RGB sourced document and a CMYK sourced document but can't see anything obvious. This problem seems to have developed over the past couple of weeks as it used to print RGB without a problem.
Any help would be much appreciated as I've been going round in circles with this for hours. I should perhaps add that I'm no Illustrator expert!
Thanks.

I have found a solution to the problem by installing and using the PCL 6.0 driver instead of the PostScript driver (interestingly the PostScript driver is recommended by Xerox).
I am guessing that there must be a small error/discrepancy in the Xerox PostScript driver as it works fine in all other applications and indeed even in Illustrator with everything but RGB colour mode.
This also stacks up against the way the problem materialised as it seems that the error is only apparent in the latest driver, the previous driver (as shipped on CD with the printer) works correctly (it was updated by a Microsoft Update Patch originally).
It would be nice to raise this problem with Adobe and Xerox, but I wouldn't know where to start, so I'll stick with the PCL driver.

My printer is Hp printer 932C it will only print in black and white not color

my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do

There are a few things to check:
Make sure the blue tape has been removed from the nozzle plate.
Print a diagnostic page as shown in method 4 here. Does this page print color? If so the issue may be your driver settings. Check for a "Print in grayscale" setting and uncheck this box.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Only print in black and white.

Using the correct color ink print cartridge, my Photosmart 7660 will only print in black and white. How do I fix this? I've used the printer to print photos successfully a while ago and I don't think I changed anything, but it stopped working.

When installing the new cartridges, did you get the message "Original HP cartridges have been installed"?
Can you check the ink levels and actually see the been color displayed?
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

HT204135 how do i set my macbook air to only print in black and white

How do I set my MacBook air (mountain lion) to only print in black and white?

Look in the settings for your printer, in System Preferences

URGENT HELP REQUIRED: HP PRINTER ONLY WORKING IN BLACK AND WHITE

Hi - really hoping somone can help..! Just updated all three Macs to new OSX Mavericks and now both HP printers 940c and 5510c both only print in black and white. Need to get them working in colour for my daughters school homework!!
Have seen all the forums saying look at printer settings, but none of the settings have the old OSX options turning black and white and colour on and off. It appears the drivers that were on the previous Mac software have been deleted or turned off by Apple..? WHY!! I wish I had not updated any of the Macs if I'd known I'd lose printing functionality!!!
Seems HP no longer provide drivers for these printers that are over 5 years old. Trouble is I've got hundreds of pounds worth of colour cartirdges already bought for them that I thought I'd use!!!!!!!!! Maybe I need to go back to a PC as at least you can print things!!! ;-)
Look forward to any helpful comments....
Thank all...

This thread had a similar problem:
https://discussions.apple.com/message/23615076?ac_cid=tw123456#23615076
And there were possible solutions here:
This thread may help:
http://www.fixyourownprinter.com/forums/inkjet/71278
The Gutenprint drivers may also help:
http://gimp-print.sourceforge.net/p_Supported_Printers.php

So, my Macbook Pro with retina display only prints in black and white. My printer, officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

In the Print dialog, select the Color Matching tab and then select Vendor Matching.

Photoshop CS5 only prints in black and white

Photoshop CS 5.1 only prints in black and white. It is not a new printer (Kodak) and I have printed in color in photoshop in the past. All other applications will print in color. Have removed the settings folder, but that did not do anything.

This sounds like a conflict with your printer's driver and Ps. Have you looked at a newer one?
Have you checked the Color settings in your printer's driver? Many, like most of my Epsons, can be set to B/W only. Those settings are on a print-job basis, and once I exit from a program, they are not usually retained, and go to the default, however that has been set.
Please let us know model and then driver numbers, as there might be something there.
Good luck,
Hunt

HP1515 only prints in black and white (sometimes!)

This is a weird one. Have 3 imacs in my school connected to a pc network with no problems. One imac when sent to one HP1515 will only print in black and white. However, if I print a test page, it prints in colour.
The same imac, if print sent to different HP 1515 prints in colour. Print command sent from different imac to said printer prints fine in colour. I cant work out what is going on here?!!!
Any help much appreciated

I have found a solution to the problem by installing and using the PCL 6.0 driver instead of the PostScript driver (interestingly the PostScript driver is recommended by Xerox).
I am guessing that there must be a small error/discrepancy in the Xerox PostScript driver as it works fine in all other applications and indeed even in Illustrator with everything but RGB colour mode.
This also stacks up against the way the problem materialised as it seems that the error is only apparent in the latest driver, the previous driver (as shipped on CD with the printer) works correctly (it was updated by a Microsoft Update Patch originally).
It would be nice to raise this problem with Adobe and Xerox, but I wouldn't know where to start, so I'll stick with the PCL driver.

Flattened png. files only render in black and white

Similar Messages

Maybe you are looking for