Flawless installation and operation for one of three user accounts

I have used all the wonderful support offered by this forum (except give up)to get the latest versions of Itunes/QT working on my home computer. I've managed several successful installs (and removals) of Itunes and QT but it only works properly for the primary user account. The other two user accounts (both set up as administrators) I continue to receive the infamous "error #-2095" in QT and the "Itunes encountered a problem" error message when launching Itunes. Any help overcoming this problem would be appreciated.
Dell Optiplex GX280   Windows XP Pro  

Well thank you indeed. Along with your advice (disable fast switching)and some advice offered in another thread (remove Microsoft Security Update KB-908531 & KB-921398 and select the C:/ root directory as my next re-install location) my latest versions of Itunes and Quicktime are working just fine under all three users. Can't tell you if either effort on its own would have corrected the problem. I've been messing with this since Christmas so I have been very anxious to try anything suggested. Last clean and reinstall included all of the fixes suggested (above) and found since the last clean and re-install hours earlier. Hang in there guys. Keep trying, you'll get it. Thank you again!
Dell Optiplex GX280   Windows XP Pro  
Dell Optiplex GX280   Windows XP Pro  

Similar Messages

  • Firefox has suddenly stopped connecting on one of three user accounts on the same computer. That account still connects with Safari - but not Firefox. A clean-install has not solved the problem. Help?

    Three user accounts on the same computer all link to a single copy of Firefox 3.6.8 - but one of them has suddenly lost its ability to use the program. Firefox opens in that account, but it cannot connect to the Internet. 'Done' appears at the lower left of a blank Firefox page [it's set to load a blank page initially], as though a page had finished downloading ... but Firefox does not actually generate any Internet activityx.
    Previously, the Firefox connection for this account was smooth and reliable. I haven't added, upgraded or downloaded any new programs, nor made any other computer changes in recent weeks or months.
    Puzzlingly - that same account still connects successfully to the Internet via Safari. And the other accounts on the same computer continue to use Firefox with no problem - including a test user-account that I set up today to help troubleshoot the problem. The blockage is restricted solely to Firefox with that one user account.
    Following your Support page instructions, I did a clean-install of Firefox 3.6.8, removing both the existing Firefox 3.6.8 and the Library/Application Support/Firefox folder. Going the extra mile, I checked all accounts to be certain that no Firefox folders remained in any of them - then emptied the Trash and restarted before installing a freshly downloaded 3.6.8. But blimey - the blockage still persists for that one user account.
    Firefox shows no visible cookies that might influence the connection. [It's set to delete all cookies upon closing anyway.] And I see no obvious instructions in Mac's firewall or any software program to refuse access to Firefox. The computer is stand-alone, not networked. And in any case, Firefox works just fine in the two other user accounts.
    Deleting the hobbled user account is not feasible. So what is causing this roadblock? Did I miss a step in the clean-install? How can that account resume using Firefox?
    Thanks in advance for your advice.

    If files already have been downloaded then remove the files in the updates and updates\0 folder.
    You can also delete active-update.xml and possibly updates.xml (stores the update history).
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

  • Can I have both Nano and Shuffle on one computer/same user account?

    I have a Nano that I use daily and also just purchased a Shuffle to take to the gym (I'm a bit paranoid about the Nano getting broken, lost or stolen). I'd like to have some of the same music on both devices. Can I do that? (I've yet to plug in my Shuffle in case one overrides the other.)

    Hi MNRobin,
    Yes you can! I suggest reading Knowledge Base Document #200432. If you want, you can select which songs go on which iPod by Manually adding songs, playlists, podcasts and audiobooks.
    I hope that helps,
    Jon

  • I have three user accounts on one computer. On only one account when I when I check Help - About fire fox only one user account says apply update and won't apply. The other two work fine.

    One of three user accounts on the same computer appears to not be updating to 8.0.1 correctly. One admin and one none admin user account says it is up-to-date. The other non-admin user account, under Help About Firefox says apply update, but won't.

    As long as you installed MS Office into its default location (the top level /Applications folder) it will be available to all user accounts on the Mac.
    As far as licensing is concerned you only have to enter the license code once, which you should do right after installing MS Office, in the same admin account you installed it from, by opening any one of the MS Office applications.  There is no additional licensing required for additional user accounts on the same Mac.
    Each user account is able to run the Office apps.  The only thing you will have to do is go through an initial setup screen in each user account (but this setup does NOT involve entering any additional license codes).
    You may have problems if you installed MS Office in a particular user account (i.e. NOT in the top level /Applications folder).

  • Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

    Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

    Why have 5 accounts if you need to access all of them.. just have one account?
    Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

  • There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report

    When run as a batch program, (currently this is the case), or withT-Code ZJPVCS303 the selection screen is unchanged (except for additional sales area above)
    - When run as T-Code ZJPVCS303_UL (UL stands for Upload) the selection screen is changed.  The unix file option is no longer available, and the user is able to upload a local file (in the same format as the current unix file, but tab delimited) to the program for processing.
    Requirements:
    There are two transactions ZJPVCS303 and ZJPVCS303_US for one single Report.
    ->When ZJPVCS303 Transaction is executed, the file is uploaded from the Application
      server to SAP R/3. The selection screen parameters would be:
      Logical Filename:
      Sales Organization:
      Distribution Channel:
      Division:
    ->When ZJPVCS303_US Transaction is executed, the file is uploaded from the Presentation Server
      to SAP R/3. When this transaction is executed, it should not have the 'Logical
      Filename' parameter anymore on the selection-screen. Instead it should only have
      Local File name on the presentation server:
      Sales Organization:
      Distribution Channel:
      Division:
        The same thing is applicable for the other transaction ZJPVCS303. When transaction ZJPVCS303
    is executed, it should not have the 'Local Filename' parameter anymore on the selection-screen. Instead it should only have
    Logical Filename:
    Sales Organization:
    Distribution Channel:
    Division:
    So how should I make these parameters invisible depending on the transaction codes execution.
    I have an idea of using MODIF ID, LOOPING AT SCREEN...MODIFY SCREEN.
    I have an idea of using SY-TCODE.
    EX:
    AT SELECTION-SCREEN OUTPUT.
    IF SY-TCODE = 'ZJPVCS303'.
    LOOP AT SCREEN.
    IF SCREEN-GROUPID = 'GRP'.
       SCREEN-INPUT   = 0.
       SCREEN-INVISIBLE = 1.
       MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ELSEIF SY-TCODE = 'ZJPVCS303_US'.
    LOOP AT SCREEN.
    IF .....
    ENDLOOP.
    ENDIF.
    ENDIF.
    But I am not able to get the output which I require. Please help me out.

    Hello Rani
    Basically the transaction determines whether upload starts from application server (AS) or presentation server (PC). Thus, you will have the following parameter:
    PARAMETERS:
      p_as_fil          TYPE filename   MODIF ID unx,  " e.g. Unix server
      p_pc_fil          TYPE filename   MODIF ID wnd.  " e.g. Windows PC
    AT SELECTION-SCREEN OUTPUT.
      CASE syst-tcode.
    *   transaction(s) for upload from server (AS)
        WHEN 'ZJPVCS303.
          LOOP AT screen.
            IF ( screen-group1 = 'UNX' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
    *   transaction(s) for upload from local PC (PC)
        WHEN 'ZJPVCS303_US.
          LOOP AT screen.
            IF ( screen-group1 = 'WND' ).
              screen-input = 0.
              screen-invisible = 1.
              MODIFY screen.
            ENDIF.
          ENDLOOP.
       WHEN others.
       ENDCASE.
    Regards
      Uwe

  • VFX3 ERROR:Enter a Name and City for one-time account postings (F5 266)

    Dear Colleagues.
    Finance are teying to release a billing doc to Finance on VFX3 and getting the error below.Is it something not maintained correctly somewhere (Customer Master,etc)?
    All help greatly appreciated,
    PAPJ1
    Error Log
                 0010056707 000000 Document 0010056707 saved (no accounting document generated)
                 0010056707 000000 Enter a name and city for one-time account postings
                Technical data
                    Tech. data details
                     Client
                     Group Number
                     Sales Document Number                  0010056707
                     Item Number of the SD Document         000000
                     Schedule Line Number                   0266
                     Counter in Control Tables              00
                     Message Identification                 F5
                     System Message Number                  266
                     Output Type                            E
                     Message Variable 01
                     Message Variable 02
                     Message Variable 03
                     Message Variable 04
                     Group Type

    Hi.
    The system logic is the following:
    In the master record of your one-time account, there is a field called
    'Reference account group'. The field status settings of the account
    group entered here are relevant for the one time vendor screen.
    Please note that even if the fields are changed from mandatory to
    optional if the NAME and CITY of the One Time Vendor is not filled, the
    system will still prompt the Error Message F5266.
    If you do not enter the name and city you will receive error F5266.
    The system logic here is to make sure that the name and the city being
    keyed-in properly for the Executive Information System reportings.
    Please note that it is hard-coded in the system.
    Check the following notes
    604312
    587806
    548834
    513748
    512360
    Also if you are using any bapi to post the document, you can  resolve the issue pass-in 'Name', City and Region field values in BAPI while creating the billing document.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • Enter a name and city for one-time account posting is the message i get

    Enter a name and city for one-time account posting is the message i get ,when i am trying to post a onetime vendor .I have entered name ,country and language when the pop comes.But still throws me this message ,pls help.

    Hi,
    I didnt understand what u mean by "when i am trying to post a onetime vendor".
    Pl. specify whether you are:
    -Creating a OTV
    -Creating a PO for a OTV
    or
    doing any other transaction
    Regards,
    Prithviraj

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • May I install Aperture on my iMac and MacBookPro for one price?

    May I install Aperture on my iMac and MacBookPro for one price?

    Yes, Like Neil says.
    However note that Aperture will not synch a Library between the two Macs. Huge flaw.
    -Allen

  • Firefox not loading graphics and pictues for one user

    I am running 10.2.8 with Firefox 1.5.0.11 and one of the user accounts on my mac is not loading web pages properly. The IE for mac on that same account is working fine. All other accounts on the machine have firefox and work fine.
    It must be a preference for that user account but trashing the firefox plist for that account doesn't help.
    Can anyone help?
    emac   Mac OS X (10.2.x)  

    Nagarajan,
    Thank you for your help.  Do you know how to clear the user setting to fix this problem as stated in the link?  I do not want to create a new user to fix this because it will take awhile to re-create the users custom menus, and it appears the the person in the other post continued to have the same problem after a couple of months after repeatedly creating new users.
    We have used SAP Business One for 5 years without having this problem, and it just recently started happening, but only for the one user.
    Thank you,
    Theresa

  • Does a new customer buying creative cloud include download and use of Photoshop, Fireworks, Bridge and Acrobat for one designer/individual?

    Does a new customer buying creative cloud include download and use of Photoshop, Fireworks, Bridge and Acrobat for one designer/individual?

    Cloud Plans https://creative.adobe.com/plans
    -and subscription terms http://www.adobe.com/misc/subscription_terms.html
    -what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
    -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

  • HT201272 I'm trying to buy some gold and money for one of the race games but they said contact i tune

    Imtrying to buy some gold and money for one of the race games but they said I should contact I tune

    Welcome to the Apple Community.
    Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

  • Please tell the basic procedure and operations for inventory in Sap

    Hello:
          everybody,  please tell me the basic procedure and operations for inventory
    in sap?  couldn't thank you more.                                                                               
    Frank
                                                                                    Best regards

    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIM/MMIM.pdf
    /people/community.user/blog/2007/05/04/physical-inventory-in-material-management
    Physical Inventory Cycle:
    1. Create physical Inventory document MI01
    2. Print physical inventory document MI21
    3. Enter count MI04
    4. Execute difference list MI20
    5. Post with/without differences MI07
    Configuration :
    Inventory Management and Physical Inventory
    Plant Parameters for inventory management
    Goods receipt: Set tolerance limit
    Valuation and Account Determination
    Define Price Control for Material Types
    Account Determination without Wizard
    Rewards if Helpful

  • One of Three Mail Accounts not receiving msgs

    Cannot retrieve msgs. in mail from one of three email accounts. All are set up the same. All three had been working fine for over one year. A couple days ago, one of the accounts stopped retrieving mail. I can see the msgs. on the mail server when I use a browser w/ webmail (which is Comcast), but I cannot retrieve into Mac Mail. I've not changed anything. I can send email msgs from all three accounts and can retrieve msgs. in two of the three accounts.
    Also, I tried a different mail appn (i.e., Netscape Mail) and was able to retrieve the msgs. for the email account that is no longer working in Mac Mail. Help!!! I depend on this account for important communications...
    Tom

    As previously noted, the problem in retrieving msgs. to one of my three mail accounts was resolved, but I wasn't sure what the fix was. Well, the problem returned again today (after a couple months of no issues) where one of the accounts could not retrieve msgs. from the Comcast POP server. I searched the Apple Support site and noticed the recommendation to have different usernames and "different passwords" for each mail account on same server. Comcast Mail has a scheme of primary and secondary mail accounts. The mail account unable to retrieve msgs. from the server was a secondary account w/ a different user name than the primary, but the same password. I changed the password on the secondary email account (both on Comcast's server and in the local Mail preference) and all is working fine. I don't know for certain if this was actual fix or something else was changed by Comcast or me, but I believe this did it.
    Tom

Maybe you are looking for