Fleet  management configuration docs

Hello,
I need to configure the fleet management but I dont know how to do that as I am new to this part.
if anybody can send the docs for configs and also if someone can tell a overall flow with one example will help me a lot to proceed...I do gothru the sap help and got some idea but wanted to know the real scenario with example...pls help
vijay

hi
hi
goto
Spro
Plant Maintenance and Customer Service --> Master Data in Plant Maintenance and Customer Service --> Settings for Fleet Management
Creating a Fleet Object as Equipment
Logistics --> Plant Maintenance -->Management of Technical Objects --> Equipment --> Create (Special) --> Fleet Object.
check this help link also
http://help.sap.com/erp2005_ehp_03/helpdata/EN/32/d66bebfc7111d29ee40000e8323350/frameset.htm
-ashok

Similar Messages

  • Issue management  configuration docs required

    Hello sap gurus
    Can anyone forward me Issue management document for configuration and where do we use this in CRM.
    Regards,
    divya

    Hi Somar,
    just perform the steps described in the Implementation Guide in SAP Solution Manager.
    Run transaction SPRO, choose SAP Reference IMG, expand the tree for SAP Solution Manager.
    Perform all activities listed under Basic Settings, you will also find the required steps for Issue Management.
    Best regards,
    Ruediger Stoecker

  • Need KM File Repository manager configuration Steps

    Hi Portal guru
    I need KM File Repository manager configuration doc for KM Configuration.  it is urjent.
    helpful answer rewarde with high points.
    Regards
    Sumit

    Hi Sumit,
    there are some wiki entries about how to integrate windows filesystem to KM.
    [https://wiki.sdn.sap.com/wiki/display/KMC/IntegratingWindowsDocumentstoKM]
    [https://www.sdn.sap.com/irj/sdn/wiki?path=/display/KMC/FileSystemRepository-W2KSecurityManager]
    [https://www.sdn.sap.com/irj/sdn/wiki?path=/display/KMC/CMRepositoryinFSDBMode]
    Best regards,
    Denis

  • Configuration docs for Asset Management

    Hi.
    Does anyone have configuration docs for Asset Management
    thanks
    Tom

    Go to http://help.sap.com/ and click on SAP Best Practices. Look for Building Blocks Library under the Additional Information on the right side of the page. In the Building Block Library, look for J10- Asset Management. Click on that and thereafter, under Technical Documentation, click on configuration guide. There you should have all the information or at least some of the information you need on Asset Management.

  • NoClassDefFoundError: weblogic/management/configuration/KernelDebugMBean

    NoClassDefFoundError: weblogic/management/configuration/KernelDebugMBean : weblogic/management/configuration/DebugMBean
    I'm getting this error when trying to run a test of a web service developed with Axis outside of WLP.
    weblogic.jar is in my classpath, and contains that class. So, I suspect there is some other class that might be missing. I've tried adding every .jar I can find from WLP to my classpath to no avail.
    Here is the full trace:
    Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/management/configuration/KernelDebugMBean : weblogic/management/configuration/DebugMBean
         at java.lang.ClassLoader.findBootstrapClass(Native Method)
         at java.lang.ClassLoader.findBootstrapClass0(ClassLoader.java:891)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:301)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.xml.jaxp.RegistryDocumentBuilderFactory.<clinit>(RegistryDocumentBuilderFactory.java:28)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
         at java.lang.Class.newInstance0(Class.java:350)
         at java.lang.Class.newInstance(Class.java:303)
         at javax.xml.parsers.FactoryFinder.newInstance(FactoryFinder.java:100)
         at javax.xml.parsers.FactoryFinder.findJarServiceProvider(FactoryFinder.java:278)
         at javax.xml.parsers.FactoryFinder.find(FactoryFinder.java:185)
         at javax.xml.parsers.DocumentBuilderFactory.newInstance(DocumentBuilderFactory.java:98)
         at org.apache.axis.utils.XMLUtils.getDOMFactory(XMLUtils.java:221)
         at org.apache.axis.utils.XMLUtils.<clinit>(XMLUtils.java:83)
         at org.apache.axis.configuration.FileProvider.configureEngine(FileProvider.java:179)
         at org.apache.axis.AxisEngine.init(AxisEngine.java:172)
         at org.apache.axis.AxisEngine.<init>(AxisEngine.java:156)

    Hi Tim,
    Pls always mention WLP version for a question.
    Looks like there has been a change in the class "KernelDebugMBean" between WLP 9.2 and WLP 10.0
    9.2: public interface KernelDebugMBean extends weblogic.management.configuration.DebugMBean
    "http://edocs.bea.com/wls/docs92/javadocs_mhome/index.html"
    10.0
    public interface KernelDebugMBean
    "http://edocs.beasys.co.jp/e-docs/wls/docs100/javadocs_mhome/index.html?weblogic/management/configuration/KernelDebugMBean.html"
    Not really sure. Something is messy about DebugMBean superclass.
    Might a BEA support question
    Thanks
    Vishnu

  • Standard Structure Not Updating (S114) Fleet Management

    Hi...
          We are implmenting the Fleet Management . I did the following configuration setting
    1) Created view profile and assign with fleet object type.
    2) Define the Consuamable type, Engine Type .
    3) Setting done for unit of measurement for monitoring of consumption.
    4) Dfined special measuring position for fleet objects.
    5) Defined calculation method for fleet consumption methods.
    6) Created gas station locatin.
    7) Setting done for consumption relevent counter reading update.
    After that I have created fleet as a equipment. After that I am posting the fuel in IFCU transaction. Now  I am facing one problem that distance data is updating in MCIZ transaction but Fuel Volume  data is not updating in the MCIZ report. In the PMIS stting, the key figure "IAMENFLVOL"  reference indicator is "A" (Key Figure to be updated).
    Can anybody help me to solve this problem
    Thanks in advance.
    Regards
    Pramod

    Hi,
    Check this link:
    [Fleet Management|http://www.nd-solutions.com/pdfs/white_EAM/EAM_ConfiguringFleetMgt.pdf]
    This link has all the steps with screen shots.
    Also check SAP Note: 563832.
    Hopefully this will resolve your issue.
    Thanks,
    Amit.
    Edited by: Amit Saxena on Oct 23, 2008 10:12 PM

  • Time management configuration

    Hi
    I required the doc. of time managent configuration...
    Regards
    Tapashi Saha

    Hi Dude,
    The following is the config. of TM
    IMG --> Personnel Time Management --> Work Schedules --> Define Public Holiday Classes
    IMG --> Personnel Time Management --> Work Schedules --> Personnel Subarea Groupings --> Group Personnel Subareas for the Work Schedule
    IMG --> Personnel Time Management --> Work Schedules --> Personnel Subarea Groupings --> Group Personnel Subareas for theDaily Work Schedule
    IMG --> Personnel Time Management --> Work Schedules --> Daily Work Schedules --> Define Daily Work Schedules
    IMG --> Personnel Time Management --> Work Schedules --> Period Work Schedules --> Define Period Work Schedules
    IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Day Types
    IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Day Types
    IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Special Days
    IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Define Employee Subgroup Groupings
    IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Define Groupings for the Public Holiday Calendar
    IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Set Work Schedule Rules and Work Schedules
    IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Generate Work Schedules Manually
    IMG --> Personnel Time Management --> Work Schedules --> Planned Working Time --> Set Default Value for the Work Schedule
    IMG --> Personnel Time Management --> Work Schedules --> Planned Working Time --> Set Default Value for Time Management Status
    IMG --> Personnel Time Management --> Time Data Recording and Administration -->Substitutions --> Define Personnel Subareas for Substitution Types
    IMG --> Personnel Time Management --> Time Data Recording and Administration -->Substitutions --> Set Defaults for Substitution Types
    IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Group Personnel Subareas for Attendances and Absences
    IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Define Absence Types
    Edited by: Raghunath Shyamala on May 18, 2009 6:35 AM

  • Sample Content Management Plan Doc

    Hi,
    Does anyone has sample Content Management Plan docs.
    I do remember that, in BO online e learning courses, they provide these sample docs as part of their exercises.
    I lost those docs. Now I don't have access to those courses too.
    If anyone has the same docs or something similar docs, please provide.
    As I Installed a fresh installation, I would need to create CMP doc.
    Kindly help me.
    Thank you.

    Hi Robert,
    Thanks for the input.
    I've configured the template using the document template tool (CRM_OI_TEMPLDSG) i.e. available  on web for business role SALESPRO -> Sales Operations-> Document Templates with template profile as Object type. This template profile, I assigned to one of transaction type of acitvites.
    But the button "With template" under attachment tab with this activity type is not getting enabled.
    I'll be interested to know if any missing steps or setting required for template configuration.
    Regards,
    Arjun

  • Re: Fleet management in Plant Maintenance

    Hi Guru's
    Here i have an issue reg the configuration screens in PM
    In SAP-SPRO---Plant maintenance and Costumer Services, I am not able to find the Screens required for  configuration for FLEET MANAGEMENT i e.,
    1) Set List Processing for Fleet management objects.
    2) Set reference object screen for Vehicles.
    3) Consumption Relevant Counter reading Update. 
    These are mandatory for capturing the cost of the fuel into reports of  Vehicle analysis report.
    Please any one can Send me whether we need go for any Patches or to update any notes.
    Present  i am using ECC-6 EHP-5
    Please reply back ,it is very urgent.
    Regards
    Kumar

    I hope, for the below points there is no separate configuration.
    1) Set List Processing for Fleet management objects.
    2) Set reference object screen for Vehicles.
    For 3) Consumption Relevant Counter reading Update.
    IMG => PM & CS => Information systems for PM & CS => Configure Measurement document update
    I hope, this is common for all the versions. Please check.

  • Risk management/Financial doc. no

    Hi,all
    Goto->Header->Billing
    Risk management/Financial doc. no
    I want to konw how to use the item (Financial doc. no).
    Is it any effect to the credit?
    what the relation to Fi module?

    hi,
    VBKD-LCNUM,
    this deals with risk management which deals with RBDD and LC for an examples.
    like:
    RBDD : RESERVE FOR BAD AND DOUBT FUL DEBTS.
    LC : LETTER OF CREDIT IN EXPORTS SALES.
    you can see in VX11N -
    FINANCE DOCUMENT CATEGORY : C/O/R/U - irrevocable confirmed/others/revocable/irrevocable un - confirmed.
    FINANCIAL DOCUMENT TYPE : as 01 LC.
    for achieveing this you need to configure
    risk management
    credit management
    payment gurantee procedure
    payment form
    deperciation if any.
    to calculate the above result.
    balajia
    Edited by: balaji timmampalli achari on Dec 20, 2010 5:00 PM

  • Talent Management - PDF Docs IMG Config Step

    Hello,
    We are having some issues with the configuration step u201CAssign Application Forms to Elements of PDF-Based Documentsu201D.
    Here are the steps we have taken so far:
    1) Copied the Application Forms from Client 000 (HRTMC_RM_COVER, HRTMC_RM_TALENT_AGENDA_TOPIC, HRTMC_TALENT_PROFILE, HRTMC_TALENT_SHORT_PROFILE) to our Sandbox & Development Clients
    2) Set u2018Use Complex Bundlingu2019 to u201Ctrueu201D via FPCONNECT (SM31)
    3) Attempted to add the different u201CParameter valuesu201D HRTMC values (specified above) to the IMG config step assign application forms to elements of pdf-based docs
    When trying to complete #3, we receive an error u2018enter a valid valueu2019. I checked both the Application Forms and the Forms Class and these objects exist, and are active. We even re-transported the objects to see if that was the problem, but it did not work.
    Any thoughts to why we are receiving this message?

    Can anyone tell me how doea the portal talent management configuration work???

  • PM Fleet Management Consumtion Relevant node missing under SPRO

    Hi,
    I am trying to configure Fleet Management under Plant Maintenance module using SPRO.
    We are on ECC 6.0 with the patch levels to <N>.
    I am not able to find the node "_Consumtion Relevant Counter Reading Update_" under Fleet Management System. The main node is missing which would further take me to the creation/defining of "Gas Stations". As, in the IFCU transaction system is asking for Gas Station Code.
    Please let me know if I can provide some more information for the same, for you to help me with the same to the best of your knowledge.
    Thanks in advance.
    Vijay

    Hello,
    You need to activate the EA-PLM extension switch. See [this|Fllet management; thread.
    -Paul

  • Oracle Access Manager - Configuration Manager Success Stories

    The Oracle Access Manager Configuration Manager [http://download-uk.oracle.com/docs/cd/B28196_01/idmanage.1014/b32392.pdf] has been around for about a year now. I'm looking for any feedback regarding this product:
    Has anyone deployed it?
    How successful was the deployment?
    Is the tool doing what you expected it to do?
    Thanks for any responses.
    Mark

    @pokurik: cn=orcladmin is the full DN. In OID there are two orcladmin users with different ACLs.
    Which OAM version? Always provide the version you are using.
    --olaf                                                                                                                                                                                                                                                                                                                                                       

  • Identity Management configuration - Data link shows 2 IBM OLE DB Provider DB2

    I'm configure a new Identity Manager configuration; working through the steps from MMC:  SAP NW Identity Manager (right click) > New > Identity Center configuration.   At the popup .. Connection String (...) the popup shows 2 IBM OLE DB Provider. I selected one and successfully  with "Test Connection'; then followed the rest of the prompted screens.  At the end, MMC was created but with error message " The Identity Center was unable to determine the type of database you are using. It will not possible to use Identity Center"
    In the "Version Info" tab it shows "Detected DB - Unknown"
    This on Windows 2008 server,  IdM 7.2 and DB2 database v 10.5
    Any help is gratefully appreciated.
    Phuon

    Hi Matt,
    Thank you for your advise.  Correction my environment,  NW 7.31 AS Java  and DB2 database is on Linux server. The Windows server runs other IdM components (Designtime, Runtime, VDS ..).
    We have IDM 7.2 SP7.
    The DB2 config look okay. Another thing that after IDM database was created; we overlay-ed the IC_DB on Linux (target system)  with a working IC_DB database from another (source) system and adapted the table  IC_OPER.MC_GLOBAL_VARIABLES  to fit with our target system.
    Thank you again.
    Phuon
    Update:
    After verified the DB2 Server/Client configuration settings are correct according to Matt provided doc-link. we're still experiencing the same error.
    Un-install IDM and Re-install IDM  that did not help either. 
    Final Update:
    After exhaustive checked and verification; I uninstalled IDM on Windows, cleanup all IDM directories and started from scratch. I also made sure that  my id on Windows server has full administrator rights, JVM and Paths correctly set.
    The re-installed completed clean and MMC configuration for IDM was successful.
    Thank you all.
    Phuon

  • Lion Server Profile Manager Configuration

    Hi Guys,
    Currently have been testing Lion Server and Profile Manager Configuration.
    So Far Have setup
    Lion with Server App and Server Admin Tools
    Configured Open Directory Master and enabled SSL on LDAP
    Once Configured OD has created a CA Certificate can use for Profile Manager
    Have Enabled in Server.app Web and Profile manager
    In SSL Certificate Configuration have set CA Certificate for Web and Enabled Apple push notifications with my apple ID
    In Profile Manager Enabled Device Management and Enabled Sign configuration profiles and selected CA Open Directory Certificate Created when setting up OD Master.
    On Server Originally could install Trust Profile OK and Enroll Server OK with no issues, but on any other 10.7 Devices could install Trust Profile OK but would always say unsigned and Enroll would never work or just hang.
    Now Since Played around with settings on 10.7 Server can no longer enroll but trust OK.
    Questions have is
    For SSL and Profile Manager to work properly as well as Certificates do you require to purchase a proper SSL Certificate or can we use the OD Master Certificate that gets created. All we are testing is on the Local LAN so don't want to get a SSL certificate from the internet.
    Also why cannot 10.7 clients trust profile and enroll Devices Properly? How do I get this working properly?
    Any ideas?
    Regards,
    Shane

    taubmas wrote:
    Not sure if its that as finally got Lion Server working on a VM setup so network shouldn't be an issue...
    Had 1 OSX Lion Server VM and 1 OSX Lion Client VM and OSX Lion Server VM gets profile and enrolls device fine but again OSX client doesn't get enroll just sits again at installing..... even if set keychain to trust and make trust profile verified..
    any other ideas? I think need to somehow get the server to trust trust profile by default instead of going to keychain all the time.
    Shane
    Did you get this to work in an ESXI envrionment? If so, which version are you running?

Maybe you are looking for

  • HP Officejet Pro 8500 "phone off hook"

    HP Officejet Pro 8500 panel shows "phone off hook" and faxes will not come in and it is on a dedicated phone line.  I can send out without any problem.  The telephone technician determined the problem is not with the phone service.  

  • How do I get a high resolution pdf version of my pages document?

    When exporting a pages document to the "best" version of PDF, the image is saved at a much lower resolution than what I need.  I have a 3.5 MB pages file that ends up converting to a PDF that ends up only at 268KB.  The quality just does not look pro

  • Can I desplay numeric results as a sequence is running?

    The default sequence display just shows pass/fail.  I would like to show the numeric results to the operator as the test is running.  What I would like to do is to build a long string with one line per test, and display this string as it gets built. 

  • Fbs 10g error with ant make

    I got error when i do ant make 1. Is this normal to have exception like below. "[java] Exception during compile, trying again with shorter command line" 2. It says Pakage "oracle.j2ee.ws.common...." does not exist. Where to find these pakages or ...

  • Different Value for Object Currency and CO Currency

    Hi, We have ran a full settlement for an Internal Order again a Fixed Asset but the problem is that the Value CO Currency Field is displaying a different amount to that of Value Object Currency and the currency code for both fields is the same which