Flex 14 green fuzzy screen

I purchased this laptop in August. I have only had it a few months and half my screen has began to flicker green fuzziness. My computer is still under warranty. What should I do?

Hi cjohnson88,
Looking at the screen shot I may have to agree with yigit though. This does look like more a hardware failure. But however before finalize into that conclusion, i was wondering that fuzziness of the screen happens are you still able to move your pointers around or open applications or does your system freezes and put it to a halt until you have to attempt a hard reset ?
Reason I ask is that based from screen shot it looks as if only the area in the browser or window is affected, so I assuming that this could be software but just wanted to make sure.
Do let me know.
Regards

Similar Messages

  • Green fuzzy screen -  Any suggestions?

    After updating to iOS 5.0.1 my ipad has been slow and sometimes unresponsive. It was operating very slow today and then the screen went to a green fuzzy screen. Now it's less green and has a pulsing redish box on the home screen. Any suggestions?

    Try a system reset.  It's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • Green Fuzzy screen

    When i turn on the laptop it comes on with a green fuzzy screen and will not do anything elso.

    Hello @DBow ,
    Welcome to the HP Forums!
    I understand you are experiencing a green fuzzy computer display. I'll do what I can to help! I would try the troubleshooting in this document: Display Quality Issues
    If the issue is not resolved by trying these steps, you are probably experiencing a hardware issue. I would contact HP phone support for assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks!
    Mario
    I worked on behalf of HP.

  • Issues: extremely slow start up, occasional green fuzzy screen, doesn't always hibernate and overheats

    First off, I should say that I'm not the type of person to shutdown my computer. If anything, I shut it to hiberate. I'm not sure if that's bad pratice or if that's what lead to this over time.. So here's what happens.. Today, I was working away and all of a sudden a fuzzy screen comes up with a little bit of green and then a beeping sound. So I shut it off. This is rare, sometimes the fuzzy screen comes up for a second randomly or when I open my computer from hiberate mode or when I'm just using the computer.
    When I turn my computer on,
    1. sometimes the 'on' button doesn't work and it takes a few tries (however this hasn't happened in the past few weeks. *knock on wood*)
    Once the computer is on the blue screen comes up:
    2. which stays on for anywhere from 5-20 minutes.
    3. Log in appears with the cursor blinking but I actually can't type anything.. It lags behind sometimes another 20 minutes before my password appears and I could log on.
    Checking the message board for similar questions it was recommended that I update the software.
    I've tried to get Mavericks on here but I get an error message when it tries to restart the computer and never does so successfully on its own.
    I've helped it along and was able to attempt at installing it but I waited a least an hour for it to 'find my disks' with no luck I went the disk utility repair route istead of time machine backup which couldn't find my external or anything for that matter.
    The error message I got back was:
    invalid block count It should be 21066078 instead of 21066076. Found corrupt needs to be repaired.
    Any thoughts or advice would be helpful. Thanks in advance. Below is my EtreCheck.
    Hardware Information:
        MacBook Pro (15-inch, Mid 2010)
        MacBook Pro - model: MacBookPro6,2
        1 2.66 GHz Intel Core i7 CPU: 2 cores
        8 GB RAM
    Video Information:
        NVIDIA GeForce GT 330M - VRAM: 512 MB
        Intel HD Graphics - VRAM: 288 MB
    System Software:
        Mac OS X 10.6.8 (10K549) - Uptime: 0 days 2:2:6
    Disk Information:
        Hitachi HTS725050A9A362 disk0 : (465.76 GB)
            (null) (disk0s1) <not mounted>: 200 MB
            Macintosh HD (disk0s2) / [Startup]: 465.44 GB (80.03 GB free)
        MATSHITADVD-R   UJ-898 
    USB Information:
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
    FireWire Information:
    Thunderbolt Information:
    Problem System Launch Daemons:
        [System]    org.samba.winbindd.plist 3rd-Party support link
    Launch Daemons:
        [System]    com.adobe.fpsaud.plist 3rd-Party support link
        [System]    com.adobe.SwitchBoard.plist 3rd-Party support link
    Launch Agents:
        [System]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
        [System]    com.adobe.CS5ServiceManager.plist 3rd-Party support link
    User Launch Agents:
        [not loaded]    com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
        [not loaded]    com.adobe.ARM.[...].plist 3rd-Party support link
    User Login Items:
        AdobeResourceSynchronizer
        Dropbox
    Internet Plug-ins:
        AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 3rd-Party support link
        FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 3rd-Party support link
        Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
        AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
        AdobePDFViewer: Version: 10.1.9 3rd-Party support link
        CouponPrinter-FireFox_v2: Version: Version 1.1.9 - SDK 10.5 3rd-Party support link
        Flash Player: Version: 13.0.0.214 - SDK 10.6 3rd-Party support link
        JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Outdated! Update
        QuickTime Plugin: Version: 7.6.6
        Silverlight: Version: 5.1.20513.0 - SDK 10.6 3rd-Party support link
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
    iTunes Plug-ins:
        Quartz Composer Visualizer: Version: 1.2
    3rd Party Preference Panes:
        Flash Player  3rd-Party support link
        Flip4Mac WMV  3rd-Party support link
    Old Applications:
        None
    Time Machine:
        Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU:
             6%    firefox
             5%    EtreCheck
             2%    hidd
             1%    WindowServer
             0%    distnoted
    Top Processes by Memory:
        631 MB    firefox
        164 MB    mds
        74 MB    Mail
        74 MB    Dropbox
        57 MB    plugin-container
    Virtual Memory Information:
        5.33 GB    Free RAM
        1.02 GB    Active RAM
        799 MB    Inactive RAM
        886 MB    Wired RAM
        1.30 GB    Page-ins
        0 B    Page-outs

    Simska,
    regarding the overheating, you can try resetting your MacBook Pro’s System Management Controller.
    Regarding the invalid block count, you should boot from your grey Mac OS X Install DVD which originally came in the box with your MacBook Pro, run Disk Utility from it (via the Utilities menu in the menu bar), and select Repair Disk for your internal disk.
    After your disk is repaired, exit Disk Utility and restart from your internal disk. When you log in, you should uninstall your installed version of iPhoto Photocast — it was written to work with the Lion (Mac OS X 10.7) SDK, but you have Snow Leopard (Mac OS X 10.6.8) installed, so it’s not supported under Snow Leopard. Install in its place an older version of iPhoto Photocast which is compatible with Snow Leopard. You also have an outdated version of Silverlight installed — you can download the most recent version from here.

  • I keep getting a fuzzy screen when I hook up MBP to flatscreen

    Hi,
    I dj at a bar and hook up to their HDMI connection which allows me to play music videos on their tv screens, and when I hook up my MBP mid 2012 15'' I am getting a fuzzy screen on the their flatscreen.... I am able to fix it when I mess around with the screen resolution on my macbook... it only happens there, and it works fine at home. I just curious to see if anyone has ran into this issue, and know why it is doing this... I have attached a link with a photo.
    http://s71.photobucket.com/user/djkayg/media/photo.jpg.html

    Try the tip here:
    http://www.labnol.org/software/green-video-in-flash-player/19248/
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Green fuzzy images

    Why are my images on my event screen and timeline showing up as green fuzzy glitches (looking much like a worn down VHS tape.) Is there something wrong with the import or is it a bug in the software? The preview in the event window seems fine, but when I click on it it shows up like this, both in my events and on my timeline.

    'getting green' is often an indicator of wrong conversion..
    What is the original source of that clip?
    Did you use FCPX' own import routines to import straight from camera/chip?
    Is your source a camera anyhow, or 'a file'?
    Did you use a converter tool. making clips manually 'comfortable' for FCPX?

  • HT3492 Fuzzy Screen

    We have a late 2012 Mac mini.  On our HDMI Tv, the hdmi port works perfectly.  If we take it to one of our monitors (works perfectly with other computers) and use the HDMI to DVI adapter, it shows a fuzzy screen with green dots.  We got a new DVI cable thinking it was that, but it only helped a tiny bit.  We got a Minidisplay port to DVI adapter, but it showed it a little better, but started flashing white and stopped.  I ran the Mini DP VGA Update, but all it says is "The updater could not find a mini displayport to VGA adapter to update.

    The Mini DisplayPort to VGA firmware update is only good if your using a VGA monitor.
    I'm not sure what to make of your DVI connection problem, because I have never had any DVI connection problems with my Early iMac or 2010 Mac Mini using the HDMI to DVI or Mini DisplayPort to DVI adapters.
    If you have tried resetting the > NVRAM / PRAM and adjusting the Display Preferences, then perhaps you should schedule an appointment at your local > Apple  Service Provider and have the problem looked at before your 1 year warranty is up.

  • Pavillion m9077c lockup and fuzzy screen

    My computer locks up with a fuzzy screen
    I have an HP Pavilion m9077c-b quad core computer running Windows 8.1.  It has an Nvidia GeForce8500GT video card and I suspect it is going bad, but haven’t convinced myself that it is the problem.
    I checked the following:
    Overheating (Checked with SpeedFan Program)
    GPU temperature initially 79° C
    After blowing out the case, temperatures ran in the 72-75°C range – still lock ups
    With fan blowing into the case and the temperature at ~67°C, still locked up.
    All 3 fans, PS, GPU and case fans are running
    Note – GPU Temperature may be slightly high, but seem to be within specs for Nvidia
    Drivers
    Updated Nvidia driver
    Installed a Nvidia hotfix dated 4/15/14 – Still locked up
    Other pertinent drivers seem to be up to date
    In NORMALmode, had lockups running the following, mostly individually, but sometimes in combo:
    File Exp
    MS Outlook
    lorer & Adobe PDF
    MS Digital Image
    Internet Explorer
    Web Camera
    MS Word
    Turbocad (3D rendering program like Autocad)
    In SAFE MODE, ran most of the above overnight with no problems (but no video card?)
    In SAFE MODE WITH NETWORKING, ran most of these programs for 8 hours with no lockupsl
    Video Card
    Using HP’s Support Assistant program Video Check
           i.      Lock ups in SELECTIVE START UP – runs to 56% & 90% then locks up
          ii.      Lock ups in SELECTIVE START UP with networking
         iii.      Runs in SAFE BOOT WITH NETWORKING -- no problems (but doesn’t check the GPU?)
    Ran dxdiag in SELECTIVE START UP with no problems detected
    Motherboard & CPU – tested with HotCPUTester4Pro
    In SELECTIVE START UP – ran diagnostic test for 5 hours with no problems
    In SAFE BOOT WITH NETWORKING -- ran diagnostic test for 5 hours with no problems
    Disk Drive – ran Scandisk with no problems detected
    Power Supply -  changed out ~2 years ago with a premium power supply.  600W Thermaltake.
    Any thoughts on what might be causing the problems, and if it is the video card, is there a better way to confirm it is the source?

    Yes, it definitely could be significant.  Do you have a friend who could loan you a video card to see if it works?  This would be helpful.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Why is my mac book pro mid 2012 display green flickering screen?

    Why is my mac book pro mid 2012 displays green flickering screen? I was able to return the screen  back to normal after i turn the lid up and down.
    Is this a hardware issue ? should i return to applestore since the warranty still valid?

    It seems like your display is damaged. As your computer is in warranty, take your Mac to an Apple Store or reseller to get the display replaced for free, as it's in warranty

  • Jittery fuzzy screen on a Mac Pro

    I just purchased a used Mac Pro 2 x 2.8 Quad Mac Pro on eBay. In testing it, the screen (an Optiquest 22" that works fine that I owned previously) is flickering and fuzzy.  Then when I mess with the display system preferences it clears up and is sharp again.  On a restart it goes back to the fuzzy jittery look again until I re-open the system prefs. 
    It's running 10.8.4 but I don't have the install discs.  I do have the Discs for my old computer (10.6.8)  Seems like it's a software issue since it gets cleared up with some mousing around and futzing.  Should I re-install the older 10.6.8 to see if that fixes it?
    It's a clean install of 10.8 now so it's no big deal to blank out the OS.
    I would rather not return this thing is I can sort it out.  I'd have to pay $60 to return it. 
    Thanks for any help!

    So here's more information on this.  I have clean installed 10.6 on the HD.  Same problem.
    I switched monitors and another monitor I have doesn't seem to be affected by the jittery fuzzy screen symptom. I checked and switched the monitor cables and that didn't do it.
    I didn't seem to be messed up when I start up with the Optiquest 22 main monitor in the second monitor position from the video card connections.
    On start up, the apple logo on the gray screen is sharp but as soon as the dsktop appears it goes fuzzy.
    When I go to displays in the systems settings and switch between display resulotions it clears right up and looks sharp and perfect.
    So at this point I've ruled out the OS and cables.
    It seems to be an incompatibility with the Optiquest screen. But only when used in the primary monitor position.
    This monitor has worked perfectly on my older mac pro, from 2 years previous (2006 model) Wondering if there's some software I can use to try and get the screen working right?
    I suppose I can buy another, newer monitor if the Optiquest is glitching out but I'd rather not as I know it works fine normally.
    Any thoughts?

  • IMovie and Green/Blue Screen

    How do I do a green/blue screen effect in iMovie?
    Thanks in advance.

    Hi
    a. You either buy a plug-in from eg:
    Stupendous software http://www.stupendous-software.com
    GeeThree http://www.geethree.com
    cf/x. http://www.imovieplugins.com
    Apple http://www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
    http://www.imovieplugins.com/fxhome.html
    b. or You count together the cost of the plug-ins then take a look at FinalCut Express
    Where blue/greenscreen is standard and You'll get so much more.
    Yours Bengt W

  • Blurry and fuzzy screen appearing randomly AIO 610-1270uk

    Dear users of AIO 610-1270, is anyone has  experience with blurry and fuzzy screen appearing randomely, black color is disapiring in favor of red, you can see on attached photos.
    I upgraded video drivers, but is was helpful for very short time only.
    I checked computer's video using hp support assistant, no erroes beenrepotred even screen was blurry and fuzzy durring checking.
    I would appreciate any help in this mater
    Computer specification:
     610-1270uk
    PN: LN617EZ#ABU
    i7, 6mb RAM, 2Tb HD 23"touch screen, graphic AMD Radeon HD6450A

    I have several thousand photos in several folders. I have noticed that whenever I want to change the folder used as the side show source, it takes the Screen Saver Preference pane a very long time to respond. It is as if it is scanning all the photos in the currently assigned folder in order to display them in the preview window provided, and it gets so dogged down doing that it can't respond to my clicks on the Choose Folder option.
    Assuming you don't want to redistribute your photos into a greater number of folders or subfolders so there would be fewer in each folder to process, you could try a workaround. Try moving your currently-assigned folder to your desktop temporarily, before opening the Screen Saver preference pane. If the preference pane can't find the old folder, it may immediately ask you to choose a new one. You could hopefully then do so, close the preference pane, and then put back the old folder.
    It's my understanding that there will be no future updates to Tiger, only security fixes.

  • Green Apple Screen

    For some reason my phone has changed color. The "blue apple screen" is now a "green apple screen."
    In other words, the apple is still there, but it has turned green. The picture quality has also gotten much worse. I can't see the phone, and it's functions very well at all. If I take a photograph it's almost impossible to see what I'm taking a photograph of due to issues with picture quality.
    Is there any kind of fix? Is this a known problem at all?
    Thank you.

    I'm sorry, but this did not seem to solve the problem.
    thank you.

  • Itunes 7.1  vidoeo playback....green scatter screen????

    my Itunes wont play videos. When i play them, the sound works but there is no video, just a green scattered screen. Even previews of videos in itune store wont work. if i buy a video will it still not play on my ipod? How can i fixed it so i can see the video on itunes?

    try working through the possibilities from the following document:
    Troubleshooting iTunes for Windows video playback perfomance issues

  • 1520 FUZZY SCREEN

    I have a 1520 I have had it for about 6 weeks now, I am in the UK and the phone is on Vodafone.
    After a few days I was working nights, at some point I tried to use the phone but the screen had gone "Fuzzy", I had to put it away, when I got home it was still fuzzy and I was tired, I went to bed and the next morning it was back to normal, I have to admit I forgot about it.
    Last Wednesday it happened again, but this time it didn't correct itself, so I had to go to work without it on the Thursday, Friday (UK bank holiday) was my first chance to play with it, I tried switching off using the power button but it would just restart, I tried doing a reset having plugged it into it's charger and then doing the volume and power button reset, I gave up for the day and tried again on Saturday, eventually the screen went from fuzzy to garbled but at least I could now do a restart as I could see enough and the screen was responding, a few attempts later and the screen came back to normal, it's been OK since then (But doing the reset didn't wipe any data which was good).
    I know I am not the only person to have seen this fuzzy screen as I found a link to an unanswered thread on this forum:
    http://discussions.nokia.com/t5/Nokia-Lumia/Nokia-Lumia-1520/td-p/2490586
    This search query does have a picture attachment showing the same "Fuzzy" screen.
    I popped into a Vodafone shop today and they said I would have to take it in and they would send it away and it could be more than a week, I need my phone and will only do this in desperation.
    Any ideas what is happening, any solutions or suggestions welcome.
    Bob

    hi mate,
    sounds like it could be hardware or a deeper software fault. in this case, you don't really have a choice but to leave the phone with Vodafone until it is repaired for you. i know it is an inconvenience, but you will have to make do and borrow a mate's phone for the time being.

Maybe you are looking for

  • Get text content from Linked TextFrames in order

    Hi, How can I get the text content out one by one in order for a linked textframes? Thanks. Henry

  • Inserting and updating a BLOB field

    Friends I want my application (Oracle is the backend) to look for a character in a BLOB field and then replace it with the desired character. Can some one give me some example of retrieving and updating a BLOB field

  • Manul Tasklist assignment to 03 inspection lot

    Hi All, I need to assign the task list (Routing – Master Recipe, hence we are using Process Order) manually to 03-inspection type generated lots. I have checked the possibilities in the in IMG, but the option is not available there in for this partic

  • Retrieve deleted standard table data

    HI, I was debugging the transaction F110 for analysing a certain requirement and changed some data in debugging mode. Somehow program SAPF110R was triggered which deleted the table content of the following tables: reguv reguh regup regus reguc reguhh

  • Can't download Flash Player on Mac OS

    About a week ago I got a pop-up on Google telling me that I needed the newest flash player plugin.  I went to Adobe's website and downloaded the newest flash player, but was told, upon the download's completion, that the "verification failed." I've d