Flex 2 - Multiple Questions (1) Touchpad and (2) USB 3.0
Hi lenovo friends,
I recently bought a Flex 2 14 (not sure if D) (59423165).
Firstly, can anyone link me to the correct drivers page for W8.1x64? Thank you!
Here are my questions:
1) Is there middle-click functionality for the touchpad? I cannot seem to find a way to middle-click. Does anyone know of third-party programs that will restore this functionality if the Flex 2 14 doesn't already come with it?
2) I am not achieving USB 3 speeds on the USB 3 port. I have a USB 3 flash drive that works perfectly on my desktop (achieving up to 120 MB/s), but I only achieve 30 MB/s on the Flex 2 14's USB 3 port. I am guessing that I do not have the driver installed. Can anyone help me find the correct drive?
Thanks in advance,
Chris
http://support.lenovo.com/us/en/products/laptops-and-netbooks/flex-series/flex-2-14-notebook-lenovo?...
1. Install the generic driver:
1. Disable signature enforcement: https://www.youtube.com/watch?v=NM1MN8QZhnk
2. Install the synaptic driver: 17.0.19
3. Install the aforementioned patch
2. Try the link above.
Similar Messages
-
Two questions, touchy touchpad and case maintenance
I noticed this morning that the touchpad is a bit iffy when I'm trying to move around or do two finger it randomly interprets one finger as if i had two on it.
The other odd issue with the touchpad is the click action no longer actually "clicks." It seems I just graze the button and it registers.
Obviously this is broken and needs to be replaced but how long would a fix like this take? Seeing as I need the laptop and use the laptop every single day for school work roughly how long would I be out of a laptop?
The other question is, is there a way to replace the shell with a new one? This one has a lot of scratches and little dents from heavy daily use. ***** to ugly up such a beautiful laptop."Seeing as I need the laptop and use the laptop every single day for school work roughly how long would I be out of a laptop?"
When I had to send mine in for a replacement of the hinge assembly as the left one wasn't latching quite right it was gone for 2 days. I think turn-around is fairly good with Apple, but I understand that when you use it heavily day in and day out those days can seem like weeks.
" The other question is, is there a way to replace the shell with a new one? This one has a lot of scratches and little dents from heavy daily use. ***** to ugly up such a beautiful laptop."
Bumps and scratches aren't covered under warranty so I don't know of any really cost effective way to get the shell replaced. You didn't mention what size MBP you had. If it is a 15.4" model you might want to look at one of the (*)Speck Hard Shell's to cover it and protect it from further damage.
http://www.speckproducts.com/15mac-seethru.html
edit
Wow there are some fast typers in here...sorry to repeat what was already said about the clear cases..I am too slow <g> -
Hi,
It's the second time that I power-off my book and, when I reboot no keyboard no touchpad no bluetooth and no USB.
With desktop remote I can check the system management hardware that does show nothing under USB controller.
The first time I've tried every kind of mac reset, NVRAM PRAM SMC Safeboot ecc...NOTHING...
I have solved it with Command+C and new macosx instalation...
Finally I think that was a software problem not hardware....
After a month, today, again the same problem...any idea?more details,
I have a IOMEGA 1T Ultramax and a USB mouse always connected...
Here the exactly sequence to have a NO USB boot:
- Macbook magsafe, ultramax and mouse connected.
- Ejectetd ultramax and magsafe disconnected.
- Macbook moved to battery working time...and powered off.
- After one night, PowerOn and Keyboard, touchpad and every USB Death in OSX.
PS: USB works in new macosx installations, every kind of reset tried.
Thanks for your time -
E530 e430 touchpad and trackpoint questions
hi all,
please can you give me a feedback from your experience on e530 or e430 laptops
a) is your touchpad unit shaking? My touchpad has one milimeter gap, i mean when you tap it is going down one milimeter and this is very annoying.
b) are your trackpoint buttons working well on every press you make. My right button has a dead zone. Imagine that you divide the button into four pieces (two up and two down). The upper left piece of the button is the dead zone, so when you press it there nothing happens. The result is that i need to press it harder and at the most right side of the button.
Do you experience these problems at your e530-430-330 laptops?noone has e530?
please, tell me about your touchpad. Is there a gap between touchpad and base? when i tap the touchpad it depresses about 1 mm and it feels loose. Is it normal? If it is defective i want to be on time for return - doa. -
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach. -
Hi everyone
I have multiple questions on BDC.Would u please answer them with explanations ASAP...
1. How do you create a batch input session for a transaction?
a) We create a bdc and use ‘call transaction’ in background mode.
b) We create a bdc and use ‘call transaction’ in error mode.
c) We create a bdc and use ‘bdc_insert’ for the transaction.
d) None of the above.
2. What is the alternative to batch input session?
a) Load module
b) Call transaction
c) BAPI
d) Idoc segment
3. Which SAP table stores the BDC session queue information?
a) APQD
b) APQL
c) APQQ
d) APQI
4. Which program can be used to release BDC sessions within a job?
a) RSBDCSUB
b) RSBDCJOB
c) RSSUBBDC
d) BDCRECXX
5. Which one of the following is output to the job log when included in an ABAP program running in the background?
a) Write statements
b) message statements
c) report parameters
d) Submit statements
6. Your program specs call for you to read the first 10 records from a text file (fname1), and write them out to another text file (fname2).
Which block of code will accomplish the result desired in the above scenario?
a) Open dataset fname2 for input in text mode.
Do 10 times.
Read dataset fname1 into hold_var.
Transfer hold_var to fname2.
Enddo.
b) open file fname1 for output.
Open file fname2 for input.
Read dataset fname1 into hold_var 10 times.
Transfer hold_var to fname2.
c) open file fname1 for input.
Open file fname2 for output.
Do 10 times.
Read file fname1 into hold_var.
Transfer hold_var into fname2.
Enddo.
d) open dataset fname1 for input in text mode.
Open dataset fname2 for output in text mode.
Do 10 times.
Read fname1 into hold_var.
Write hold_var to fname2.
Enddo.
7. sy-dynpro is
a) screen no
b) program
c) table
d) field name
8. Which of the following are NOT correct usage of BDC_cursor?
a) To position the cursor on a particular field.
<bdc_tab>-FNAM = 'BDC_CURSOR'.
<bdc_tab>-FVAL = ‘fieldx’ .
b) To position the cursor on a particular field.
<bdc_tab>-FNAM = ‘fieldx’
<bdc_tab>-FVAL = 'BDC_CURSOR'. .
c) For fifth row of Table control
<bdc_tab>-FVAL = 'fieldx(5)'.
d) For fifth row of Table control
<bdc_tab>-FNAM = 'BDC_CURSOR(5) '.
9. In case of background processing of a BI session, which authorization is checked?
a) Developer of the program that schedules BI Session
b) User who executes the BI session
c) User who executes the program that schedules BI Session
d) User ID that is passed to the BDC_OPN_GROUP function module inside the calling program
10. Which of the following are TRUE about Transaction Recorder?
a) Transaction Code is SHDB
b) Transaction Code is SM35
c) It can generate ABAP code for the BDC program automatically
d) It can generate ABAP code for the Call Transaction program automatically
Regards,
PratibhaHi,
1) C We create a bdc and use bdc_insert for the transaction
2) b) Call transaction
3. d) APQI
4. a) RSBDCSUB
5. b) message statements
6. d) open dataset fname1 for input in text mode.
Open dataset fname2 for output in text mode.
Do 10 times.
Read fname1 into hold_var.
Write hold_var to fname2.
Enddo.
7. a) screen no
8. b) To position the cursor on a particular field.
<bdc_tab>-FNAM = fieldx
<bdc_tab>-FVAL = 'BDC_CURSOR'. .
9.b) User who executes the BI session (or)
c) User who executes the program that schedules BI Session
10. a) Transaction Code is SHDB
c) It can generate ABAP code for the BDC program automatically
Regards -
How to install this update and solve USB and touchpad issues?
I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
Driver revision history:
Twinhan VP704A Driver Release note
Note:
1.In case the system crashes while running with VP704A, Please install ULI
USB 2.0 host driver in \ULiUSB20Driver
2. For XP/SP1, please update with the patch in
<http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
3.In XP/SP1, updating driver will crash the system, while new install is ok.
The trick to update driver in XP/SP1 is shown in the following steps,
a. Uninstall the driver
b. Unplug and plug the USB device
c. Install the driver
4. To support remote controller, please launch Agent.exe in \Agent.
Further details can be found in \Agent\Readme.txt
Known issues:
1. Multi-instance is not supported
2. Remote wakeup is not supported
3. High CPU usage in Analog audio/video capture
4. Bad VBI Signal using YUY2 color format
5. AV out of sync if audio captured from wrong filter.
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
6. Noise with analog-TV and FM Radio
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
Driver revision history:
2005/10/24, Version: 1.0.2.8
Bugs fixed and new features:
1.Crossbar not properly set.
2005/10/21, Version: 1.0.2.7
Bugs fixed and new features:
1.Firmware version read from FLASH OK!
2005/10/14, Version: 1.0.2.6
Bugs fixed and new features:
1.Mutil-Access driver blank part below part screen when VBI!
2.Mutil-Access driver HCT driver verify crash fix!
2005/10/07, Version: 1.0.2.5
Bugs fixed and new features:
1.Tuner Power off when S-Video,Composite.
2005/09/30, Version: 1.0.2.4
Bugs fixed and new features:
1.Agent.exe updated for repeat bug!
2.TI5150 Register for Video Format fix!
2005/09/29, Version: 1.0.2.3
Bugs fixed and new features:
1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
Note: "USB Audio device" filter provided by system does not support mutil-Access.
2.Reset TI5150 when a new frequency is set
2005/09/27, Version: 1.0.2.2
Bugs fixed and new features:
1.Fix I2C unstable access on some devices.
2005/09/23, Version: 1.0.2.1
Bugs fixed and new features:
1.Analog TV becomes darker sometimes.
2005/09/15, Version: 1.0.2.0
Bugs fixed and new features:
1.Fix INF for Windows 2000 installation.
2.FM radio scan policy changed!
2005/09/13, Version: 1.0.1.9
Bugs fixed and new features:
1.USB serial number string not visible with USBView, firmware update required.
2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
2005/09/13, Version: 1.0.1.8
Bugs fixed and new features:
1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
2005/09/12, Version: 1.0.1.7
Bugs fixed and new features:
1.Improve channel lock status check performance
2.Pinnacle INF Fix.
2005/09/09, Version: 1.0.1.6
Bugs fixed and new features:
1.Add some audio initialization function.
2005/08/31, Version: 1.0.1.5
Bugs fixed and new features:
1.NTSC & PAL mode resolution separation.
2005/08/30, Version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2.Frame Drop.
3.Pinnacle inf file HCT chkinf fail.
2005/08/22, Version: 1.0.1.3
Bugs fixed and new features:
1.Add Remote controller interface in digital source filter.
2.A new Remote controller test tool with source code in \Test_RC.
2005/08/16, Version: 1.0.1.2
Bugs fixed and new features:
1.Reorg Pinnacel & Twinhan's driver & folder.
2.VP704A_BDA_Test tool, add system code test.
3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
4.Firmware update
2005/08/15, Version: 1.0.1.1
Bugs fixed and new features:
1.Serial number function is lost while adjusting TV audio volume
2.RC6A CIR support
(This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
EEPROM should be flashed with \Firmware\M9207.bin )
3.Serieal number, MAC address and OEM device name supported.
Please refer to further details in \Firmware\readme.txt.
4.Ioclt sample source code included.
2005/08/08, Version: 1.0.0.10
Bugs fixed and new features:
1.Analog TV audio volume increase.
2005/08/04, Version: 1.0.0.9
Bugs fixed and new features:
1.Analog TV Video mode set failure.
2005/08/03, Version: 1.0.0.8
Bugs fixed and new features:
1.Off-centerf requency scan +/- 125Khz
2.Fix duplicated program scanned in MCE.
2005/08/02, Version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
2005/07/28, Version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
2.Improve I2C communication stability.
3.Unify Signal strength & quality indication as THBda ioctl interface.
4.Capture filter Lock status check.
2005/07/28, Version: 1.0.0.5
Bugs fixed and new features:
1. The same signal strength & quality indications as VP7046.
2. Debug build driver
2005/07/21, Version: 1.0.0.4
Bugs fixed and new features:
1.Update INF.
2005/07/20, Version: 1.0.0.3
Bugs fixed and new features:
1.Improve performance in PCM4
2.Switching from Analog TV Mode to FM Mode failure
2005/07/04, Version: 1.0.0.2
Bugs fixed and new features:
1.Production Tool FM test OK!
And here is the readme from the other file within the update ?
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
INTRODUCTION
This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
and Windows XP.
CONTENTS OF THIS DOCUMENT
1. Installation Instructions
2. Uninstallation Instructions
1. Installation Instructions
(Windows 98 SE & Windows ME)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system,then restart your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows 2000)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows XP)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- Click "NEXT"
- This program will install and load the driver and you don't have to reboot the
computer.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller", continue to install.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
Notice:
If you can't setup driver successfully. Please reboot your system and then follow
above steps to install driver again.
2. Uninstallation Instructions
1. Open "Control Panel" folder.
2. Invoke "Add\Remove Programs" icon.
3. Choose "ULi USB2.0 Driver" item.
4. Click on "Add/Remove" button to remove drivers.
Change List:
1.74
1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
2.support all USB2.0 Host Controller.
1.73
1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
4.fix issue that wirless lan will disconect when plug-in usb device.
1.72
1.Fix issue that system will crash when USB HD copy large file.
1.71
1.improve Power management function in Win98/ME.
1.70
1.Improve the function of devcie detection.
1.62
1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
1.61
1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
1.60
1.To support power management functions when a HUB with USB device plug into
a root HUB.
1.57
1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
2.Fix issue that audio can't display smooth when USB device attach to system.
3.Fix system can't detect USB dvice when USB device attach to system in
suspend mode.
4.Fix issue that when USB root HUB have full loading, USB HD sometimes
transaction fail.
1.56
1. Fix issue that DVD decoder device can't display properly.
1.55
1. Fix OTI USB 2.0 hand drive can't be detect issue.
2. Fix USB mouse can't use after resume from suspend.
1.54
1.Improve driver security.
1.53
1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
1.52
1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
automatically fix file system errors
2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
v.1.51
1. Improve USB 2.0 cardreader compatibility.
2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
v1.50
1. Improve bulk transfer
v1.48
1. Fix USB 2.0 LAN driver installation hanging up
2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
3. Fix some laptops Win98SE booting hanging up
v1.47
1. Improve bulk transfer performance.
2. Fix USB 2.0 bulk webcam preview failure.
v1.46
1. Support USB 2.0 and 1.1 Isochronous devices
2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
4. Improve device detection capability in Win9X/ME
v1.45
1. Fix system hanging up when resuming from ACPI sleep mode.
2. Fix mouse sometimes doesn't disappear when it's unplugged.
3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
v1.44
1. Support composite device
2. Improve device detection
v1.43
1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
2. Fix high-speed device detected as full-speed device
3. Fix some USB mouses detection failure problem
4. Fix some USB 2.0 hubs detection failure problem
5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
v1.42
1. Fix PC Card ejection hanging up in Win98/ME
2. Fix suspend/resume hanging up in Win98
3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
4. Fix some PC Card USB 1.1 device detection failure
v1.41
1. Add new feature that system can install driver before device is plugged.
2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
v1.40
1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
v1.32
1. Fix issue that driver can't detect Microsoft driver in Windows XP
if OS path is not c:\windows.
2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
v1.31
1. Fix issue that driver can't install on Windows 2000.
v1.30
1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
3. Fix issue that sometimes when you click "Scan for hardware changes".
to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
file can't be found.
4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
verison of ULi EHCI controller devices are plugged and unplugged.
5. Support installing driver for more than one ULi EHCI controller devices existing on
system at the same time.
6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
v1.20
1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
ULi Coporation. (ULi) web sites:
http://www.uli.com.tw/ (Taiwan)
CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres? -
Music and Video on Nas in folders but how do i set up itunes on multiple computers to see and use these files and create libraries?
So i have had a itunes set up on my old PC, bought a NAS and copied the folders over to the NAS, i did this incorrectly and so then even when i told the old PC to use that folder it saw all the songs but wasnt able to play the songs as it was looking in the incorrect place.
So now i want my Mac as well as my PC and others to all use the music, videos etc on the NAS they are in itunes friendly folders (as they were compiled this way by the itunes on the old PC.
When i tell the mac to use the itunes library.itl file it sees the song list (about 100gb) but cant see any songs, so i have removed this file to another location for now with the hope to set up a new file and then get it to see the songs on the folder from the NAS.
Can someone tell me how to do this for all the Mac's and PC's on my network as i really want one master library that all use and add too.
Thanks for your help in advance.I have the same question but I am using two pc's
-
How can I get Captivate to score across multiple question pools?
I have set up a Captivate assessment as follows:
A core set of 50 questions will be presented to all learners
Depending on where the learner is, he will receive an additional 10 questions from one of 5 location-specific pools
Learners will see a total of 60 questions
I have my question pools set up and branching correctly, and am using the Branch Aware option to assist with this and the progress indicator. Before the first question I have the learner click one of several buttons (not quiz elements) to set a location variable, and after presenting the core questions I use this variable to determine which random question slide to jump to next (with set of slides pointing to a different question pool). After asking the 10 random questions from that pool the learner is then redirected to the review slide so only one set of location-specific slides is encoutnered on each attempt.
All of that seems to be working as designed but the scoring is not behaving as I had expected; despite the fact that all questions are asked before the review slide is presented (i.e. all questions are within the quiz scope in both the edit-time and run-time sense) the review slide only reports results from the first question pool. For example, in a test file I reduced the question slides for the first pool to only display 2 questions, for a total of 12 presented, but my results show "0 of 2 correct" or "2 of 2 correct." The pass/fail results of the module match the review slide, so this is not a simple display issue; if I miss either of the two questions from the first pool I fail regardless of what happens in the second pool.
What am I missing? Surely there wouldn't be the option of using multiple question pools if only one could be graded ...
I am working on Captivate 6.0.1 64-bit for Windows. FWIW the file was originally created in Captivate 5 and has since been upconverted, but the additional question pools weren't introduced until after the conversion processes so I wouldn't expect this to be related to residual crud left over from that process.Thanks for the quick response ...
I had already tried deleting the review slide itself, though Captivate wouldn't let me - it just hid it. I tried again using the method you recommended but the slide remained in the filmstrip, so I tried deleting again, then re-added it from the Quiz Settings page ... no joy, same behavior as before.
I checked the Advanced Interaction page and confirmed that all of the scored questions were configuredthe same way as the non-scored questions, with the only difference being the pool that they were drawing from.
Other thoughts? I am by no means a Captivate expert but this one really feels like it shouldn't be this hard, and I'm more than a little afraid that it's the file itself that's jacked up ... -
Really fed up with multiple apple ID's and email addresses
I've been an apple product user for the best part of 5 years and I have two apple ID's, multiple iCloud alias's and a number of associated email addresses. Two questions:
Can all of my ID's be merged in to one account?
If not:
Can I create a new apple ID and transfer all my existing purchases from both of the other Apple ID's?
The way I see it is I paid for the content licence so I should be able to manage it as I see fit. Having multiple ID's seriously screws with my setting in iOS.
Thanks for the help!Welcome to the Apple Community.
You can't merge accounts or transfer purchases from one account to the other. If you only have one account in use for iTunes, you could with a little effort transfer all your iCloud data from one account to another, so everything became part of the ID you currently use for iTunes. -
How multiple users can open and update it same time in Sharepoint 2010, excel file
we are using SharePoint 2010, multiple users can open and update the file at same time in SharePoint, I have searched a lot and
read it, some suggestions were can create the file as share work book and then save on Share point and other were its supported only with Office web Apps, Excel Web App, we don't have office Web apps or excel web app, is there any other suggestion,
any help will be great, thanks in advanceHi,
You need office web apps for co-authoring, see Software version requirements for co-authoring in SharePoint 2013 and SharePoint Online section in below link -
http://technet.microsoft.com/en-us/library/ff718249(v=office.15).aspx
and
http://office.microsoft.com/en-us/sharepoint-foundation-help/document-collaboration-and-co-authoring-HA102772333.aspx
Edit: Link for SP 2010
http://technet.microsoft.com/en-us/library/ff718249(v=office.14).aspx
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
Lenovo G500 TouchPad and Keyboard wont function at the same time
Lenovo Laptop G500
Windows 8
Synaptics TouchPad V7.5
Driver Version 16.3.13.3
The Synaptics TouchPad and the keyboard won't function simultaneously. If I uninstall the driver for the TouchPad the keyboard and TouchPad will work simultaneously on the windows driver however the TouchPad is very limited. There is no option to turn off the palm touch listed as a fix in other forum post.
This problem makes it impossible to play games that require the TouchPad and mouse to work simultaneously I would appreciate any help in resolving this issue.
Thanks in advance Dennishi djdishaw,
Welcome to the Forums.
Can you try to:
1. Lower the palm tracking and touch sensitivity to minimum, apply the changes and observe.
- Link to picture
2. If same problem, try to update the Synaptics Touchpad driver to v16.3.15.1 and repeat Step 1.
Windows 8/7/XP/Vista 64/32-bit Edition v16.3.15.1
All Languages
113.9 MB zip
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
FIXED: X300 - Touchpad and Touchpoint stop working at random
Had a user today with an X300 say that his touchpad and touchpoint just 'stopped' working; plugging in a USB mouse allowed him to continue using the laptop, but both onboard devices were dead. We tried the FN + F8 toggle, which normally disables the touchpad; this time it said "UltraNav Driver Not Installed."
I reinstalled the UltraNav Driver and Utility, as well as the Hotkeys application. Multiple reboots later, the touchpad and touchpoint were still disabled.
The fix, it seems, is to go into the BIOS (F2 at boot I believe?) under Config --> Mouse --> and disable EITHER the Touchpad OR the Touchpoint. When both devices are active, neither will work. When one device is disabled, the other will work.
I'm waiting on word from Lenovo about a better fix, but for now this will let you use the laptop without a USB mouse.@xyster,
Have you tried doing a factory recovery?
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =) -
How to Upload Multiple questions IN LSO using Authorizing tool
Hi Friends,
I am very new to the E-learning. As per my knowledge after uploading any content through Authorizing tool in will be uploaded to KM folder.
In my practice I am trying to upload the Multiple questions. I have searched but I am not find So please guide me the below scenario.
We have a requirement that is User need to complete the assesment. In this assesment we have 100 questions with random option. How to upload these 100 question at a time using authorizing tool.
Thanks,
SureshHi Sandesh,
this is simply not supported, not in WebDynpro nor in standard HTML.
A workaround is to upload a ZIP with all files and on server side unpack the ZIP and operate on the single files.
I hope it will help u..
----------------------OR-------------------------
As you know using File upload UI element we can upload only one file at a time. There may be a scenario where user may want to upload any no of files at a time which is not determined at design time. This can be acheived using the ACF UpDownload UI element which requires a security whiltelist to be created
http://scn.sap.com/docs/DOC-2270
----------------------OR-------------------------
You can use Table UI element.
Regards,
Deepak Singh -
Add image to SharePoint Survey for multiple questions??
Hi,
How can i show a particular picture for group of questions in sharepoint 2010 survey? From following link i was able to add image for one question. so what i need to do if i want to add more questions with the same image?
http://robdevereaux.wordpress.com/2013/08/09/how-to-add-pictures-to-a-survey/
ThanksIf you want to add images to multiple questions using the code at that link do something like:
elements[e].innerHTML = elements[e].innerHTML
.replace('CAR_IMAGE','<img src="/PATHTO/IMAGE/CAR.jpg"></img>')
.replace('BOAT_IMAGE','<img src="/PATHTO/IMAGE/BOAT.jpg"></img>')
.replace('PLANE_IMAGE','<img src="/PATHTO/IMAGE/PLANE.jpg"></img>');
Also, if you would like to add a picture, text or formatting to every survey page in a survey with page breaks you will typically need to edit both the NewForm.aspx and EditForm.aspx pages using SharePoint Designer or by adding a Content Editor Web
Part to both pages.
Here's some of the other things like this I have done with surveys:
http://techtrainingnotes.blogspot.com/2013/02/add-content-editor-web-part-cewp-to.html
http://techtrainingnotes.blogspot.com/2010/07/sharepoint-add-instructions-and-color.html
(and there's a chapter on surveys in my customization book.)
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner
Maybe you are looking for
-
IPhone user getting BB network sync messages - wants them to stop
Hello everyone. Just signed up here, happy user of Blackberry Tour 9630 with Bell Mobility in Montreal, Quebec, Canada for nearly two years. HOWEVER, my current need for assistance has absolutely NOTHING to do with my Blackberry model, my carrier, o
-
Hi all, I have problem with datasrc i.e. when Iam checking the datasrc in the extractor it is showing the msg error in the datasrc. The error msg in the display log is showing the msg. whengenerating upload program for DataSource 0CRM_PROD_ATTR. pl
-
In desperate need for help on Gingerbread upgrade
I have an unrooted D2 Global and tried to upgrade to 2.3 yesterday. I did download this stupid update but it just wouldn't install. The install bar would stop at 20-30% and then reboot, and then tell me the upgrade fail. I downloaded the patch for ov
-
Stoping "Plesae Select" List/Menu Results from coming through
Hi there, we have several list/menu's on our website form and want to know if theres a way of stopping all the "please select" results from coming through? "please select" comes through because the user hasent selected a result in the list menu. Chee
-
Hacking Mitigation process/template
Hi Everyone, I'm currently do not have a sufficient hack response process. I'm wondering if anyone has a template or would be willing to share with me the process that they use? This is primarily for auditors, but would be nice to have the proper for