Flex 3 :How to use trace for printing data in console

Hi ,
I heard that we can use trace to print data on to Flex Builder 3 console . But when i tries it was of no luck .
The below is a simple program , in which i was out of luck .
public function callMe():void
trace("AAA");
<mx:Button id="Register" name="Register" label="Register" height="23" click="callMe()"/>
Here in the above porogram , after clicking the Button , i cant see 'AAA 'related inside my Flex Builder .
Any help ??
Thank you .

Hi Kiran
Make a break point at trace line and debug the application There u can find the message u typed in console.. trace works only under debugging mode... not in development mode ..
Have a nice day
Thanks
Ram

Similar Messages

How to use AVDocPrintPagesWithParams for printing without any prompt dialog or alert message ?

Hi Friends,
I have a problem to print the pages of a pdf, but with out any dialog box prompt. So I choosed the api AVDocPrintPagesWithParams(avDoc, avDocPrintParam);
But I don't know how to set parameter for 2nd parameter of the funtion. My requirement is I want to print pdf's using default printer of the system i.e. Print As PDF using Abode PDF print.
Page Dimension should be same as previous, with postscript value 3 (best print).
I have used AVDocPrintPages (AVDoc doc, ASInt32 firstPage,ASInt32 lastPage, ASInt32 psLevel, ASBool binaryOK,ASBool shrinkToFit); But it gives an error message for some pdf's that PDF may not printed correctly because font information couldn't be found.
So can anyone let me know please how to set the parameter of AVDocPrintParam, so that I can use AVDocPrintPagesWithParams and do the same job.
Thanks and Regards,
Saffiuddin Sheikh.

Dear lrosenth,
I am into an operation where I have check whether each objects falls inside my rectangular region or not. For this I am taking help of BBox and matrix information. The problem is that when I find PDF's those have form or container objects, their matrix and BBox is depenedent on matirx of the form or container containing them.
In most cases by adding(concetinating ) the matrix value of form and the element gives the correct matrix, BBox value, but some cases I am yet to understand the behaviours. So to avoid these form and container for our immidiate project delivery, we are using this option to print the pdf and then process for checking the position of elements.
My original requirement is :
How to know objects position inside a form or container ?
This is just an alternative time being way to achieve the task. But if you have any idea of how to detect postion of objects inside form/container then please let me know.

How to use exception for a Date Key Figure

Hello All,
I have the following requirement.
1. I have a Key Figure which is Date Type.
2. I need to color the cell to green if the it is filled with date otherwise leave it as it is.
Please suggest how to overcome it.
Thanks & Regards,
Rajib

hi,
Your requirement is not clear, you have the below setup
I have the following requirement.
1. I have a Key Figure which is Date Type.
How can a KF be of date type, or is it the value of a date characteristic that you have extracted in KF using formula variable. If yes you just need to define exception for the value greater than 0.
regards,
Arvind.

How to use sqlldr for loading data in Oracle 10g xe.

I want to load data using SQL*LOADER in Oracle DB from a .csv file but it doesn't seems to be working can anyony please help me.I am not get getting how to use sqlldr.
in CMD in giving this command
sqlldr hr/hr control='c:/data/record.ctr'
record.ctr>>load data
infile 'c:\data\record.csv'
          into table record
fields terminated by "," optionally enclosed by '"'
( Name,uday, hemant )
sql table in data base>>CREATE TABLE "RECORD"
(     "NAME" VARCHAR2(50),
     "UDAY" VARCHAR2(50),
     "HEMANT" VARCHAR2(50)
record.csv>>name,uday,hemant
c1,45454,84894
c2,489654,21322
can you please tell me how can i get this simple example run.

C:\>sqlldr scott/tiger
control = data.ctl
SQL*Loader: Release 10.1.0.2.0 - Production on Thu Sep 14 17:06:46 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Commit point reached - logical record count 3
SQL> conn scott/tiger
Connected.
SQL> create table data (col1 varchar2(40),col2 varchar2(40),col3 varchar2(40));
Table created.
SQL> select * from data;
COL1                 COL2                 COL3
name                 uday                 hemant
c1                   45454                84894
c2                   489654               21322
SQL>
data.csv
name,uday,hemant
c1,45454,84894
c2,489654,21322data.ctl
load data
infile 'c:\data.csv'
append
into table data
fields terminated by ','
optionally enclosed by '"'
(col1,col2,col3)i hope it will solve ur problem

How we use hpeprint for printing a return label of a company comes in email through a link

For using eprint i have to attach documents with email....but how can i print my return label from a company which comes in a link and get print only when we open the link.By opening the link the label comes with popup print the page. when we select print ,asking fr the printer ....in that case hoe can we use eprint.......plz let me know

Oh. Okay. You should be able to use traditional printing if you are printing form a computer. What printer are you using?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to use NAS for copying data on?

Well, this may sound like a simple question, but apparently it's not as simple as it seems.
I have a Raidon SL3620 NAS. I managed to set it up with help of one of our community members.
However, now I found the problem of not being able to copy all my data on there. I want to copy my movies etc to the NAS, so I created a user (myself) and a group (called public), with no shared space limits. I granted access to all to make things easy, and after the harddrives were formatted, I drag-dropped the relevant folders into the new user directory on the NAS.
First of all, it predicted some 100 hours to complete the task (and my iMac only has a 1TB harddrive), whilst my Mac and the NAS are both connected via ethernet. I find that unlikely.
Then when I woke up this morning, it had aborted the transfer due to lack of space. It has 2x 2TB storage in RAID 1, and as I said, my iMac has a 1TB HD. So why does it say it's full after 900MB??
Also, when I then decided to remove the data, I was told some files were in use. Which surprised me because the copy was cancelled. I checked airport utility and no one was using it, so I wonder what's happening there!
Can anyone help me out?

right, I think this was caused by using a wireless connection, which takes longer than smoke signals. Using ethernet seems to have solved the issue for now

How to use "bapi_salesdocu_createfromdata1" for asign date to delivery.

I am using the Bapi BAPI_SALESDOCU_CREATEFROMDATA1 to create an order and their delivery, the date of the order they are believed correctly according to the data that are sent, but the date of the delivery this creating with the date of the system. that I should make so that the date of the delivery is similar to that of the order.
Regards

tks. Krish G
not used this item because the REQ_DATE not exist in the structure .
in the structure only exist the next item : BILL_DATE, PURCH_DATE, PO_DAT_S, BILL_SCHED, INVO_SCHED, FIX_VAL_DY, PRICE_DATE, SERV_DATE, FIX_DATE_QTY
tks.

How to use "Trace" in JPDA

I want to know how to use "Trace" in Java Platform Debugger Architecture.
Trace displays traces of program execution.
how to invoke it?
Trace can be invoked as follows:
java Trace options class args
what in front of me is I set envoriment variant and system variant by windows 2000 pro control panel by set: "CLASSPATH", in variant name and �E:\Java\jdk1.5.0_06\lib\tools.jar� in variant value.
But while I use
jave Trace -help myclass
(this myclass.class is working by "java myclass")
there is:
"Exception in thread "main" java.lang.NoClassDefFoundError: Trace"
in the screen.
Please help me by this function though Sun said it is easier than jdb.
mysys:
window 2000 pro. (Chinese)
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode, sharing)
thank for your attention

ok, please read "How to use "Trace" in JPDA"
sundararajan.a give me many thing than solution
and read his blog...
refer to http://blogs.sun.com/roller/page/sundararajan?entry=java_class_ic_errors
as well.

How to activate trace for web services

Hi Experts,
How to activate trace for web services in SOAMANAGER.
We are not able to view the Payload trace of the error logs.
Can anyone please let me know how to go about this???
Regards,
Ashwini

Hi Ashwini,
The thread below might be useful to you:
[SOAMANAGER - Get the XML generated;
Regards, Trevor

How to Use 'uid' for AD Users Without Domain Name For User Log in OAM

How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.

I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein

How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro

How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(

The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest.

How to use i for if condition in a for i in loop?

Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!

user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features.

What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.

Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer

Install Sun ONE Directory Server 5,2 & how to use it for authenticate user

Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28

I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms".

How to use parathesis for OR and AND OPERATOR...

oracle 10g
Hi
Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
select count(balance) from balanace_tb
where kk_code in(111,112,113)
or
kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
or
kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
or
kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
or
kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
and
open_date=20130331

I assume you're looking for something like this?
select count(balance) from balanace_tb
where (   kk_code in(111,112,113)
       or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
       or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
       or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
       or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
and open_date=20130331
If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
Re: 2. How do I ask a question on the forums?

Flex 3 :How to use trace for printing data in console

Similar Messages

Maybe you are looking for