Flex 3 Module not loading - 1 of 32???

I have 1 Module out of 32 that will not load?  Months ago, some PCs who did not have the Flex Framework already downloaded would fail, so I put the framework in the root folder and they worked.  Today, I did a simple update to the code and it is back to not running again.  The module in question was developed exactly as the other 31.  In my development environment, where much code has changed, including the main app - it loads just fine.  It is like the main application does not even try to load the module, as the 1st real action is to turn on the wait cursor which I never see.  Any and all advice and/or guidance is appreciated.
Thanks

Use a network monitor and see if the module is requested.

Similar Messages

  • Error When Publishing "no access to internet (internet module not loaded)"

    When publishing a site in GoLive 9 I get the message""no access to internet (internet module not loaded)".
    i've never had this problem before, this just started happening and cant figure out how to get it to work again. it's weird because i can connect to my ftp server from the file menu and the internet module is checked on in my preferences. i've tried creating a new site file for my webpages and reinstalling GoLive and nothing has worked.
    has anybody had the same problem? thx!

    ha, ok i just figured it out. i didn't have the proper ftp setting in the publish preferences. i hadn't changed the info in the "server name" from the place holder text that was automatically inserted. that's a strange error message to display for that!!!

  • Modules not loading in Flex 4

    Hi All,
    I have migrated my application from Flex 3 to Flex 4. My application has 3 different modules. The modules are not loading when I run my application with Flex 4. Please help me in this respect.
    Thanks in advance,
    Nirmal Kumar Bhogadi

    Hi Nirmal,
    Right click on the project and go in Properties. On the left bar, go in the Flex Modules tab and check if your modules are present there.
    If not, browse your modules from the project and add them one by one.
    Regards
    Monika

  • [SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

    Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
    many modules such as wifi or psmouse are not loaded.
    My PC is Asus Zenbook UX31E.
    If I do by hand like
    # modprobe ath9k
    # modprobe psmouse
    wifi and psmouse are OK,
    but I want to set all necessary modules auto loaded.
    * Output of lsmod of linux 3.9.5-1 was 87 rows
    but lsmod of 3.11.6 (I attache below) is only 39 rows.
    * Both
    /etc/modprobe.d/
    /etc/modules-load.d/
    are empty on 3.9.5-1 and 3.11.6.
    Please give me advice, thx.
    Last edited by taro (2014-01-08 11:20:46)

    Thx. The version numbers seem to be identical.
    % uname -a                                                              [~]
    Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
    % pacman -Qi linux                                                      [~]
    Name           : linux
    Version        : 3.11.6-1
    Description    : The Linux kernel and modules
    Architecture   : x86_64
    URL            : http://www.kernel.org/
    Licenses       : GPL2
    Groups         : base
    Provides       : kernel26=3.11.6
    Depends On     : coreutils  linux-firmware  kmod  mkinitcpio>=0.7
    Optional Deps  : crda: to set the correct wireless channels of your country
    Required By    : None
    Optional For   : None
    Conflicts With : kernel26
    Replaces       : kernel26
    Installed Size : 64493.00 KiB
    Packager       : Thomas Bächler <[email protected]>
    Build Date     : Sat 19 Oct 2013 06:25:12 AM JST
    Install Date   : Fri 08 Nov 2013 12:06:17 PM JST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By   : None
    best regards.

  • [Solved]Virtualbox kernel module not loaded

    I update my system today and when I try to run Virtualbox...
    WARNING: The vboxdrv kernel module is not loaded. Either there is no module
    available for the current kernel (3.6.11-1-ARCH) or it failed to
    load. Please reinstall the kernel module virtualbox-host-modules or
    if you don't use our stock kernel compile the modules with
    sudo dkms autoinstall
    You will not be able to start VMs until this problem is fixed.
    I already had this trouble before and this was the fix
    # modprobe vboxdrv
    But it doesn't work anymore
    Any ideas?
    Edit: This just get fixed by itself when restaring my PC. Sorry
    Last edited by ilq (2013-02-13 02:32:43)

    fsckd wrote:
    rc.conf is part of the deprecated init system. icebox is not using systemd and neglected to mention that.
    Amarildo, see the wiki.
    Thanks, it really helped. It's solved.

  • Usbser_edge module not loaded, lots of undefined symbols

    Greetings folks,
    I've just recently more or less completed my Solaris 10 (sparc) jumpstart image and have noticed that upon booting the system will warn about undefined symbols for the usbser_edge module. I've been hunting around and I can't seem to find out where this module is specified to be loaded. The machine in question is a 220R, and I'd like to figure out how to not load this module so the warnings will go away:
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf0'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf1'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf2'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_free_log_hdl'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_log_hdl'
    Sep 9 09:33:25 jump-test krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'usbser'
    Sep 9 09:33:25 jump-test krtld: [ID 749970 kern.notice] WARNING: usbser:
    Sep 9 09:33:25 jump-test krtld: [ID 225575 kern.notice] unable to resolve dependency, module 'misc/usba' not found
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_lookup_ep_data'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_parse_data'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf0'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf2'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_ctrl_xfer_wait'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_close'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_power'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_sync_ctrl_xfer'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_intr_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_getinfo'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_close'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_unregister_event_cbs'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_reset'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_bulk_xfer'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_bulk_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_register_event_cbs'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_intr_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_log_hdl'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_stop_intr_polling'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_attach'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_detach'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_get_dev_data'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_open'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_log_hdl'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_rsrv'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_wsrv'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_wput'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_open'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_check_same_device'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_intr_xfer'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_create_pm_components'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_free_descr_tree'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl0'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl1'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl2'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl3'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_get_max_bulk_transfer_size'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usbser_soft_state_size'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_bulk_req'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_handle_remote_wakeup'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_client_attach'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_client_detach'
    Sep 9 09:33:28 jump-test krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'usbser_edge'
    Sep 9 09:33:28 jump-test krtld: [ID 749970 kern.notice] WARNING: usbser_edge:
    Sep 9 09:33:28 jump-test krtld: [ID 225575 kern.notice] unable to resolve dependency, module 'misc/usba' not found
    Thanks in advance for any advice anyone can provide.
    pb

    I just attempted a generic search at Sunsolve, for "usbser_edge".
    It produced references to a lot of documents available after contract login to the site.
    If you have a Spectrum login account, get to BugID 4703982.
    It's from 2003 or so...
    but it discusses the SUNWuedg package being incorrectly installed,
    on beta versions of Sol-10, to an E250 and to a SB1000.
    Other search result references to various BugID's also happened to discuss
    removing references to the driver in the /etc/name_to_major file
    as well as in the /etc/driver_aliases file.
    See BugID 4790469 or BugID 5045102
    I don't trust my skill level with mucking around with such files, however.
    If you have contract coverage for the OS or for that system, open a support case.
    If not, then see if the SUNWuedg package is installed and remove it.
    Then a reconfiguration reboot may be in order.
    What the heck, try a reconfiguration reboot just for grins and giggles.
    ... just my two cents, at least.

  • Flex Application Not loading in case of using RSL.

    If anyone can help, I release my Flex Application using RSL but now this appication is not loading on some system. I upload application.swf and framework_3.0.0.477.swz and also crossdomain.xml but application not uploading and getting error  #2032.

    Search the internet for solutions for that error.
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.
    Blog: http://blogs.adobe.com/aharui

  • Control surface modules not loading correctly at startup

    Getting a series of errors on application startup -
    "Could not load Module "CS-32" (-43)
    and microKONTROL
    and TranzPort
    and US-2400
    These are all Control Surface - none of which I use and I'm stumnped once again. How do I make this go away?

    Check this thread:
    http://discussions.info.apple.com/webx?128@@.68b982bb

  • Wacom Intuos Pro aka Intuos 5 kernel module not loading

    Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
    % lsusb | grep -i wacom
    Bus 004 Device 003: ID 056a:0315 Wacom Co., Ltd
    % grep -i wacom /proc/bus/input/devices
    % xsetwacom --list devices
    % pacman -Qqs wacom
    libwacom
    wacom-drivers
    wacom-udev
    wacom-utility
    xf86-input-wacom
    Any thoughts?

    hexadecagram wrote:Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
    Are you sure it should work? If you check linuxwacom-announce mailing list, you will see that for your device (Intuos Pro):
    - X11 support is added by xf86-input-wacom 0.23.0
    - configuration support is added in libwacom 0.8
    - kernel support is added in input-wacom 0.19 but isn't in mainline kernel yet - on 28'th Spet Jason said: "We don't yet have support for the  new "Intuos" line, but we expect our next release in six weeks' time to include it."
    I'd say you have to wait for newer kernel, or try installing input-wacom on your own risk (different thing from xf86-input-wacom). Patch for mainline kernel reached Dmitry Torokhov's input tree - but isn't merged with official kernel yet, even 3.12rc5 still does not have those patches.

  • Parallel port printer modules not loading autmatically

    According to the wiki entry for CUPS, either the kernel or or a small configuration file in /etc/modules-load (not /etc/modules-load.d) is supposed to automatically load these modules on boot. When I run lsmod I'm finding none of the printer modules (lp, parport, parport_pc) are getting loaded even though the printer is attached and powered up. Any idea why these modules are not loading? They load perfectly well manually with the modprobe command.
    As the wiki specifies, I do have a configuration file in place at /etc/modules-load/printing.conf with the following contents:
    lp
    parport
    parport_pc

    Commenting out the INSTALL lines in modprobe.conf worked perfectly.
    Before that i tried the stock kernel form current and am now using the one from testing. Neither worked with sound while the INSTALL lines were ther.
    What changed?

  • IPMI kernel modules not loading - no ipmi device

    My HP ML110 G5 has a IPMI device that worked but somewhen (I can't say when) it stopped working.
    Proof that they exist in th machine with dmidecode:
    Handle 0x0025, DMI type 38, 18 bytes
    IPMI Device Information
        Interface Type: KCS (Keyboard Control Style)
        Specification Version: 2.0
        I2C Slave Address: 0x10
        NV Storage Device: Not Present
        Base Address: 0x0000000000000CA2 (I/O)
        Register Spacing: Successive Byte Boundaries
    I quite soon found out that the ipmi kernel modules are not loaded so I tried to load them with modprobe:
    modprobe ipmi_msghandler
    modprobe ipmi_devintf
    modprobe ipmi_si
    no error, no response, no modules loaded (check with lsmod).
    There are descriptions (http://en.onoclea.com/bits/hp-microserver-remote-access-card-ipmi-on-linux.html, http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux) how to load the ipmi_si module with manual parameters. Tried, no error, no response, no modules loaded (check with lsmod).

    Zancarius wrote:
    Sounds to me like the firmware for whatever reason isn't being installed in the appropriate location.
    I checked out the PKGBUILD for b43-firmware (which I'm assuming is what you installed), and it appears to be using b43-fwcutter presumably to snag the appropriate files and place them in /usr/lib/firmware:
    # Application
    b43-fwcutter -w ""${pkgdir}"/usr/lib/firmware/" linux/wl_apsta.o
    Does the PKGBUILD generate any errors? Did you check /usr/lib/firmware for the firmware for your wireless? Worst case, you could probably try running b43-fwcutter manually and see what it does. Maybe it has some verbose/debug option you could use, too.
    The firmware is installed to the correct directory and the PKGBUILD doesn't generate any errors. I've tried b43-fwcutter manually as well to no avail. Even if that were the case though it doesn't explain why the new kernel also rejects the usbnet, ath9k, and b44 modules. Basically I'm stuck on this old(ish) kernel until this is fixed if I want any sort of network connectivity.
    Xyne wrote:This is a long shot, but if you have a separate boot partition, check that it is actually mounted. If not, backup/remove the contents /boot, mount the partition and rebuild the kernel image
    I do not have a separate boot partition on this machine. And the mtime of the initramfs images is certainly current.
    Last edited by airencracken (2012-07-22 17:41:56)

  • Module not loading at startup + logs

    I am having a problem getting my rtl8187 module to load at startup. This is my wireless driver. At startup my wireless refuses to work. I check my modules "lsmod" and the rtl8187 module appears to be loaded. However my wireless only starts working after I remove the module and then reload it.
    Can somebody tell me where I can find the log that will tell me whats going on with this module at startup.
    BFC

    Can somebody tell me where I can find the log that will tell me whats going on with this module at startup.
    You say the module gets loaded, as does lsmod. So there will be no error message, as the system thinks the module is working(which it probably is). The reason your wireless is not working may be another issue. In order for some things to work correctly certain things need be loaded before other things can access them.
    anyway, all error logs are in /var/log, shouldn't take you long to look through them. They are dated.

  • Modules not loading even though they're present in filesystem

    Last night I did a pacman -Syu on my laptop. It went well, no errors.
    This morning I boot up my laptop and now some modules aren't being loaded at boot, nor are they loading with modprobe (even with an argument to the full path of the module).
    packages upgraded:
    asciidoc
    coreutils (8.17-1 -> 8.17-3)
    elfutils (0.153-1 -> 0.154-1)
    firefox
    glibmm
    gpm
    grep
    imagemagick
    kbd
    libpulse
    linux (3.4.4-3 -> 3.4.5-1)
    linux-headers
    lirc-utils
    pyqt-common
    pyqt
    python2-pyqt
    skype
    thunderbird
    virtualbox-modules
    vlc
    wine
    xmlrpc-c
    Kernel version:
    3.4.5-1-ARCH
    /var/log/boot:
    Loading User-specified Modules
    ERROR: could not insert 'b43': Invalid argument
    ERROR: could not insert 'usbnet': Invalid argument
    Oddly enough, my eth0 device also isn't showing up (in ifconfig -a or in ls /sys/class/net) either.
    lspci -v:
    08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev02)
    Subsystem: Dell Device 022a
    Flags: bus master, fast devsel, latency 64, IRQ 10
    Memory at c0300000 (32-bit, non-prefectchable) [size=8K]
    Capabilities: [40] Power Management version 2
    modprobe:
    modprobe b43
    ERROR: could not insert 'b43': Invalid argument
    modprobe -d /usr/lib/modules/3.4.5-1-ARCH/extramodules/drivers/net/wireless/b43/ b43
    The second call to modprobe doesn't output any errors, but my wireless interface still won't come up and the module isn't listed in lsmod.
    Reinstalling linux, linux-headers, and mkinitcpio and then regenerating the initramfs didn't help either.
    I have a usb dongle for wireless as well (TP-Link TL-WN722N) that uses ath9k, but modprobe doesn't want to load ath9k either. I have compat drivers from the AUR installed, but I can't see why that would bork eth0.
    edit:
    Well just tried to modprobe b44 and that errors out as well, I thought that might be the reason ethernet wasn't working and I think I may be on the right track.
    I'm used to problems with this crappy wireless card but I've never had eth0 bork on me on this particular machine. I'm a bit stumped and I'm sure I've missed something.
    Anyone have an idea?
    edit:
    Well, for now I just downgraded the kernel and that's gotten me back ethernet. It looks like a new kernel is in the repos now, so I'm going to try another pacman -Syu. If that fixes it I'm betting it was a packaging issue.
    Last edited by airencracken (2012-07-21 19:14:51)

    Zancarius wrote:
    Sounds to me like the firmware for whatever reason isn't being installed in the appropriate location.
    I checked out the PKGBUILD for b43-firmware (which I'm assuming is what you installed), and it appears to be using b43-fwcutter presumably to snag the appropriate files and place them in /usr/lib/firmware:
    # Application
    b43-fwcutter -w ""${pkgdir}"/usr/lib/firmware/" linux/wl_apsta.o
    Does the PKGBUILD generate any errors? Did you check /usr/lib/firmware for the firmware for your wireless? Worst case, you could probably try running b43-fwcutter manually and see what it does. Maybe it has some verbose/debug option you could use, too.
    The firmware is installed to the correct directory and the PKGBUILD doesn't generate any errors. I've tried b43-fwcutter manually as well to no avail. Even if that were the case though it doesn't explain why the new kernel also rejects the usbnet, ath9k, and b44 modules. Basically I'm stuck on this old(ish) kernel until this is fixed if I want any sort of network connectivity.
    Xyne wrote:This is a long shot, but if you have a separate boot partition, check that it is actually mounted. If not, backup/remove the contents /boot, mount the partition and rebuild the kernel image
    I do not have a separate boot partition on this machine. And the mtime of the initramfs images is certainly current.
    Last edited by airencracken (2012-07-22 17:41:56)

  • [solved] aesni_intel module not loaded since switch to kmod

    Since installing kmod-4-1 as replacement for module-init-tools the AES-NI instruction optimized crypto modules (aesni_intel) don't get loaded automatically anymore.
    CPU is a SandyBridge Core-i5 2500K; aes-x86_64 isn't loaded anymore either. The CPU definitely supports AES-NI.
    Is this a problem or am I supposed to write those modules down by hand in rc.conf MODULES section?
    Kind regards
    lynix
    Last edited by lynix (2012-02-01 20:57:25)

    Nevermind. I found the bug -- I'll make sure this is fixed for kmod5.
    tech note for those interested:
    A module alias can resolve to many modules -- in this case, the alias 'aes' resolves to "aes_generic", "padlock_aes", "aesni_intel", and "aes_x86_64". modprobe, including the library equivalent, should insist on trying to insert all of these. kmod does, but it makes the mistake of quitting if one of them errors out. To wit:
    with module-init-tools:
    # modprobe -v aes
    insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/aes_generic.ko.gz
    insmod /lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz
    WARNING: Error inserting padlock_aes (/lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz): No such device
    insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/cryptd.ko.gz
    insmod /lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aes-x86_64.ko.gz
    insmod /lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aesni-intel.ko.gz
    WARNING: Error inserting aesni_intel (/lib/modules/3.2.2-1-ARCH/kernel/arch/x86/crypto/aesni-intel.ko.gz): No such device
    with kmod:
    # modprobe -v aes
    insmod /lib/modules/3.2.2-1-ARCH/kernel/crypto/aes_generic.ko.gz
    insmod /lib/modules/3.2.2-1-ARCH/kernel/drivers/crypto/padlock-aes.ko.gz
    ERROR: could not insert 'padlock_aes': No such device
    Last edited by falconindy (2012-02-01 20:54:47)

  • ACE module not load balancing across two servers

    We are seeing an issue in a context on one of our load balancers where an application doesn't appear to be load balancing correctly across the two real servers.  At various times the application team is seeing active connections on only one real server.  They see no connection attempts on the other server.  The ACE sees both servers as up and active within the serverfarm.  However, a show serverfarm confirms that the load balancer sees current connections only going to one of the servers.  The issue is fixed by restarting the application on the server that is not receiving any connections.  However, it reappears again.  And which server experiences the issue moves back and forth between the two real servers, so it is not limited to just one of the servers.
    The application vendor wants to know why the load balancer is periodically not sending traffic to one of the servers.  I'm kind of curious myself.  Does anyone have some tips on where we can look next to isolate the cause?
    We're running A2(3.3).  The ACE module was upgraded to that version of code on a Friday, and this issue started the following Monday.  The ACE has 28 contexts configured, and this one context is the only one reporting any issues since the upgrade.
    Here are the show serverfarm statistics as of today:
    ACE# show serverfarm farma-8000
    serverfarm     : farma-8000, type: HOST
    total rservers : 2
                                                    ----------connections-----------
           real                  weight state        current    total      failures
       ---+---------------------+------+------------+----------+----------+---------
       rserver: server#1
           x.x.x.20:8000      8      OPERATIONAL  0          186617     3839
       rserver: server#2
           x.x.x.21:8000      8      OPERATIONAL  67         83513      1754

    Are you enabling sticky feature? What kind of predictor are you using?
    If sticky feature is enabled and one rserver goes down, traffic will leans to one side.
    Even after the rserver retuns to up, traffic may continue to lean due to sticky feature.
    The behavior seems to depend on the configuration.
    So, please let me know a part of configuration?
    Regards,
    Yuji

Maybe you are looking for

  • How to show information from sql to flash cs6 in textbox

    I am having trouble with the showing of result of the information from sql to flash cs6 textbox which is dynamic text. I am using php to transfer the data to flash. I will like to show me the information in order like Name      score Tom        20 Ja

  • New MBP won't connnect to network PowerMac G5!

    I'm getting just ever so slightly frustrated. Ordered a MBP in February and it showed up defective. Back to Apple for repairs for 3 and 1/2 WEEKS! Finally, came back but password wasn't reset and I didn't give them my admin (they didn't start up the

  • Vendor Bank Guarantee Process

    Dear Support, We have made a Vendor Bank Guarantee with spl G/L indicator. Ran FBL1N to see the list of bank Guarantess for a particular vendor where the due date i.e. expiry date of bank Guarantee is also displayed. Now at the time of MIRO/Advance P

  • GPS (Lat Lng) Format Problem

    Hi, I'm having a problem with GPS coordinates being rounded. I'm working on an application that receives a set off lat lng coordinates and then uses the MkMapView control to display the placemark. Most of the time everything seemed ok, however I noti

  • VNC remote my computer from Internet via time capsule

    I have several computers connected with Airport via time capsule to Internet. When I am out of office, how can I remote one of the computers from the Ipad? I use Mocha VNC I´ve been trying but impossible to find the complete IP or DNS name, my IPAD d