Flex 4.5.1 iOS project very slow

Hi,
A few things. I read that 4.5.1 Flex Mobile automatically used AIR 2.7 . I have not done any overlaying b/c of this but my app on the device is slow.
When I click a list item or Back button, it takes like 2 seconds to respond. Also, there is a long black screen at the start of the app before it hits the splash image.
Another note, I've been publishing a release using ad hoc. Not sure if that matters for device performance.
Thanks for any help!

The first or second line of your "app_name.xml" should contains the AIR version number. Is it 2.7?

Similar Messages

Most of the crap ios 7 very slow I want to go back to ios 6.

Most of the crap ios 7 very slow I want to go back to ios 6.

Something may have gone amiss in the upgrade to iOS 7 on your iPhone.
To correct this follow these steps:
1. Backup your iPhone using iTunes or iCloud.
2. Use iTunes to completely restore your iPhone as new.
3. Monitor performance to see if it is normal. If not, you may have a hardware problem - if so, contact Apple support.
4. Restore your iPhone from your backup above.
5. Check performance to confirm that it remains normal.

My iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?

my iphone 4 with ios 7 (very slow & keep restarting and sometime its make shuttdown) any help please ?
i try to downgrade to 6.1.3 but its not possible

http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
Downgrading isn't supported by Apple, sorry.

IOS 7 very slow, i have many problem , exemple download documents , typing doc to go .   Very slow, sometime no response , please help us for this error

IOS 7 very slow, i have many problem , exemple download documents , typing doc to go .   Very slow, sometime no response , please help us for this error,

spacepilot wrote:
i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with a firmer grasp of english that the normal call centre staff
welcome to the forum    why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Premiere Pro Project Very Slow To Load....Why?

Hello All
Really hope that someone can suggest a reason as to why I may be experiencing this problem. Firstly, heres the problem:
Problem: I open a Premiere Project and it opens up. The bar at the bottom reports that all media is loaded, however my thumbnails are very slow to populate and then be hover scrubbable (new verb!). Not only that the timeline thumbnails take ages to update and are not available for me to begin scrubbing through right away. Very frustrating.
Here's some facts:
System Hardware:
2013 Mac Pro; 3Ghz 8 Core Model; 32 GB RAM; Dual D700s 6GB
SSD - Mac Standard 512GB as boot drive and for applications
Edit Drive - Thunderbolt connected LaCie 2Big 4TB Drive x 2 (these are daisy chained via thunderbolt too and striped together in a RAID for maximum throughput) Speeds are generally in excess of 500Mbps read and write
System Software and Information:
OS X Yosemite 10.10
Premiere Pro Project stored on Edit Drive with all media for that project
Cache Files stored on same drive as Project (Edit Drive)
Project Size = 48.7MB
Does anyone have any suggestions as to why this problem is occurring? Previously had problems with the MacPro/GPU Mavericks 10.9.3 issue that everyone had been reporting but seems to have gone away now and after some other troubleshooting like resetting preferences and PRAM; running Safe Boot Disk Permission Repair (as recommended by Larry Jordan).
Really appreciate any help and this is a really annoying issue and is affecting our workflow hugely.
Cheers

Hm, if the issue occurs with two different host systems, then i would rather think that there are maybe issues with the network. Are you aware of any changes/updates done by IT? Security patches, changes of software on router, ....
What you maybe can try is to isolate one of the host and connect one of the PXI using a cross cable directly to this host. Does the issue occur there again(still)?
You can format/reinstall one of the PXIs to do a cross check with one system with original state, the other with newly installed state.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

IOS running very slow

I have been using Time Capsule to backup my computer. It is so slow, that I backed up to an external drive and turned Time Capsule off. Unfortunate, my IOS is still very slow.
I read other posts and it was suggested that I run EtreCheck. So...here it is. I am hoping that these stats make sense to someone. They are over my head.
Thanks in advance.
Ft Lauderdale
EtreCheck version: 1.9.15 (52)
Report generated September 1, 2014 at 9:30:15 PM EDT
Hardware Information: ?
 iMac (21.5-inch, Mid 2011) (Verified)
 iMac - model: iMac12,1
 1 2.5 GHz Intel Core i5 CPU: 4 cores
 4 GB RAM
Video Information: ?
 AMD Radeon HD 6750M - VRAM: 512 MB
 iMac 1920 x 1080
System Software: ?
 OS X 10.9.4 (13E28) - Uptime: 5 days 23:7:23
Disk Information: ?
 WDC WD5000AAKS-402AA0 disk0 : (500.11 GB)
 S.M.A.R.T. Status: Verified
 EFI (disk0s1) <not mounted>: 209.7 MB
 Twenty-Eleven HD (disk0s2) / [Startup]: 499.25 GB (60.45 GB free)
 Recovery HD (disk0s3) <not mounted>: 650 MB
 OPTIARC DVD RW AD-5690H
USB Information: ?
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Inc. BRCM2046 Hub
 Apple Inc. Bluetooth USB Host Controller
 Apple Inc. iPad
 HitachiGST G-Drive Mobile 500.11 GB
 S.M.A.R.T. Status: Verified
 EFI (disk1s1) <not mounted>: 209.7 MB
 2273 (disk1s2) /Volumes/2273: 499.76 GB (334.69 GB free)
 Apple Internal Memory Card Reader
 Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
 Apple Inc. thunderbolt_bus
Gatekeeper: ?
 Mac App Store and identified developers
Kernel Extensions: ?
 [not loaded] com.aliph.driver.jstub (1.1.2) Support
 [not loaded] com.microsoft.VirtualPC.Networking (7.0.0) Support
 [not loaded] com.microsoft.VirtualPC.OSServices (7.0.0) Support
 [not loaded] com.motorola-mobility.driver.MotMobileMS (1.0.0 - SDK 10.5) Support
 [not loaded] com.motorola-mobility.driver.MotMobileMTP (1.2.2 - SDK 10.5) Support
 [not loaded] com.motorola-mobility.driver.MotMobileUSB (1.2.2 - SDK 10.5) Support
 [not loaded] com.motorola-mobility.driver.MotMobileUSBLAN (1.2.2 - SDK 10.5) Support
 [not loaded] com.motorola-mobility.driver.MotMobileUSBLANMerge (1.2.2 - SDK 10.5) Support
 [not loaded] com.motorola-mobility.driver.MotMobileUSBSwch (1.2.2 - SDK 10.5) Support
Startup Items: ?
 HP IO: Path: /Library/StartupItems/HP IO
 HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
 Parallels: Path: /Library/StartupItems/Parallels
 VirtualPCOSServices: Path: /Library/StartupItems/VirtualPCOSServices
Launch Daemons: ?
 [loaded] com.adobe.fpsaud.plist Support
 [loaded] com.adobe.SwitchBoard.plist Support
 [loaded] com.microsoft.office.licensing.helper.plist Support
 [failed] com.motorola-mobility.mmcfgd.plist Support
 [failed] com.sec.faxdb.plist Support
 [loaded] com.sonos.smbbump.plist Support
Launch Agents: ?
 [not loaded] com.adobe.AAM.Updater-1.0.plist Support
 [loaded] com.adobe.CS4ServiceManager.plist Support
 [failed] com.hp.devicemonitor.plist Support
 [loaded] com.hp.messagecenter.launcher.plist Support
 [not loaded] com.motorola.MDMUpdater.plist Support
 [not loaded] com.motorola.motohelperUpdater.plist Support
 [running] jp.co.canon.CUPSCMFP.BG.plist Support
 [running] jp.co.canon.CUPSFAX.BG.plist Support
 [running] jp.co.canon.ScanGearMF.appl.Canon-MF-Scan-Agent.plist Support
User Launch Agents: ?
 [loaded] com.adobe.AAM.Updater-1.0.plist Support
 [loaded] com.adobe.ARM.[...].plist Support
 [loaded] com.adobe.ARM.[...].plist Support
User Login Items: ?
 GrowlMenu
 iTunesHelper
 AdobeResourceSynchronizer
 MotoCast 10.20.36 PM
 MotoCastUpdater
 Dropbox
 HP Scheduler
Internet Plug-ins: ?
 Default Browser: Version: 537 - SDK 10.9
 Flip4Mac WMV Plugin: Version: 2.4.1.4 Support
 OfficeLiveBrowserPlugin: Version: 12.3.6 Support
 CouponPrinter-FireFox: Version: Version 1.0.11
 AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
 FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
 Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
 Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
 QuickTime Plugin: Version: 7.7.3
 CitrixICAClientPlugIn: Version: 11.0.0 Support
 iPhotoPhotocast: Version: 7.0
 AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
 SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
 JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins: ?
 BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
 AirPlay: Version: 2.0 - SDK 10.9
 AppleAVBAudio: Version: 203.2 - SDK 10.9
 iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
 Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
 Move_Media_Player: Version: npmnqmp 071503000004 Support
 fbplugin_1_0_3: Version: (null) Support
 WebEx: Version: 1.0 Support
3rd Party Preference Panes: ?
 Citrix online plug-in Support
 Flash Player Support
 Flip4Mac WMV Support
 Growl Support
Time Machine: ?
 Skip System Files: YES - System files not being backed up
 Mobile backups: OFF
 Auto backup: NO - Auto backup turned off
 Volumes being backed up:
 2273: Disk size: 465.44 GB Disk used: 153.74 GB
 Twenty-Eleven HD: Disk size: 464.96 GB Disk used: 408.66 GB
 Destinations:
 4Aces's Time Capsule [Network] (Last used)
 Total size: 0 B
 Total number of backups: (null)
 Size of backup disk: Too small
 Backup size 0 B < (Disk used 562.40 GB X 3)
 Time Machine details may not be accurate.
 All volumes being backed up may not be listed.
Top Processes by CPU: ?
 20% iTunes
 5% usbmuxd
 1% WindowServer
 0% coreaudiod
 0% Dropbox
Top Processes by Memory: ?
 394 MB iTunes
 340 MB firefox
 115 MB Mail
 82 MB Finder
 53 MB mds_stores
Virtual Memory Information: ?
 432 MB Free RAM
 982 MB Active RAM
 666 MB Inactive RAM
 824 MB Wired RAM
 3.46 GB Page-ins
 686 MB Page-outs

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The better your description, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? When did it start to be slow? Did you change anything just before it started? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

IOS 5 VERY Slow Internet on iPhone 4

Ever since upgrade, non-wifi internet connection is very slow and often times out. This happens even with 4 bars.
I've tried resetting. This was never an issue prior to upgrading. I need non wifi internet for work and this *****!

I've had this exact same problem.
I've done the following things to try to fix it:
*Clear Safari Cookies, history and cache
*delete unused apps
*Hard Reset
*Reset Network settings
*Double Hard Reset
When I did a speed test twice in a row I got:
1. 0.00 Download 0.66 Upload
2. 1.4 Download 0.00 Upload
This shows the spotiness of this connection issue.
I hope we get some answers about resolving this terrible issue.

IOS 8 very slow

Very slow since ios8 down load. Freezes & no response to keyboard at times. Never a problem before ios8...

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

MS Project Very Slow and Project Files Large when Using Shared Resource Pool

Hello,
We are using MS Project 2010 Professional in our organization and using a shared resource pool so we can easily identify resource conflicts. When we started this process many months ago the resource pool worked great. Now that we have nearly
all of our projects (~40) using the resource pool, it has become essentially unusable. Each project file that is sharing the resource pool is 12 MB or greater in file size, and most of the project files contain less than 100 lines. Saving any file
takes ~4 minutes. As a result, many of the resource managers and project managers are starting to avoid using MS Project which is undermining our original intent.
Any thoughts on what we could try to regain the usability, make the file sizes smaller, improve save times, etc.? Will MS Project Server fix all of these issues?
Thanks,
Josh

If any of your PMs renamed, moved or over-wrote their project file whilst linked to the Resource Pool or a master, then the file may well have corrupted itself or the pool or both. With 40 files, you can guarantee one or more PMs will do one of the above,
so file corruption is a when, not if (2days or 2 years or more).
For 40 projects Project Server or any solution that copies data to a database so the resource data can be consolidated is needed. Project Server is not a simple application, it's a full server and requires proper training and processes to add value. And
it needs configuring by someone who knows what they're doing!
In the mean time try unattaching all project files from the pool, then create a new blank pool and re-attach.You will also need to File, Save as to repair each project file if needed. For bad corruption save as to a .xml format then re-import to a blank
project.
Or, create a new master each time by inserting all projects into a new blank project, but deselecting the Link option. All tasks are then copied and the resource data consolidated. Record a macro to make creating this very quick and easy (provided your network
isn't too slow).
Rod Gill <a href="http://www.project-systems.co.nz/project-vba-book/index.html/">The one and only Project VBA Book</a> <a href="http://www.project-systems.co.nz/"> Rod
Gill Project Management</a>

Flex 4.5.1 iOS project with AIR 2.7

Hi,
A few things. This may be a mix of builder and sdk.
I read that 4.5.1 Flex Mobile automatically used AIR 2.7 . I have not done any overlaying b/c of this but my app on the device is slow.
When I click a list item or Back button, it takes like 2 seconds to respond. Also, there is a long black screen at the start of the app before it hits the splash image.
Another note, I've been publishing a release using ad hoc. Not sure if that matters for device performance.
Thanks for any help!

The first or second line of your "app_name.xml" should contains the AIR version number. Is it 2.7?

Xcode opens project very slow

I have two macbook pros purchased this summer, I've done a project in xcode. When I open the project on one of my laptops it opens right up perfectly. When I switch to my other laptop, xcode sits there with the little spinning ball for a long time. I have uninstalled and reinstalled it and removed the setmenu script and it still slows down everytime I open the project. Any ideas on what is going wrong? All other programs work fine. I'm not sure if this is the right forum. Any help will be much appreciated.
Thanks,
Andy

There is a developer forum. There are more people who know Xcode there. But I'm exceptionally bored today, so I'm here.
Is this the same project? Check your SCM settings. One may be looking for an SCM server that isn't on the other machine. That is the clever answer.
You can also make sure you have enough RAM in both machine, but you probably do.
Does this happen on every project, or just one? Is the project on the local machine (both of them), or on a server somewhere?

Mail slow with ios 6, and iOS 6 very slow and sticky in general

Ok, since I upgraded to iOS 6, my mail has been totally buggy on my iPad (version 3). It keeps sticking and showing the spinning icon when trying to download mail. I do a hard reset, and it works for a little while most of the time, but then sticks again. For what it is worth, my mail downloads from an exchange server. My iPhones (the 4 that I have from before getting the 5, as wells as the 5) do mail fine.
In general iOS 6 has made my devices as slow as mud even on other matters (one of many minor examples is that it will not unlock promptly - you try to enter the numbers and nothing happens for a few seconds - no numbers, no nothing - until it unsticks). In general, it feels like I have a PC with a virus.
Any solutions?

I feel this is part of the planned obselecence strategy. Sell you a fantastic device and then proceed to break it by incremental and non-reversible upgrades that make your device less and less useful, until it is a pale shadow of the device you purchased. Then stop providing upgrades for the product full stop, leaving it crippled.
The only constructive advice I can think of is to never accept an upgrade, because it seems that we are always slightly worse off afterwards then before.
Seriously; what extra useful functions has iOS6 given us over iOS5? A few gimmicks at the expense of losing the incredibly polished and integrated YouTube and Google Maps. And now, right on cue, scrolling of screen content is starting to judder and lag on brand new products such as iPad3. Iphone5 will have it's turn in a few months when iOS6.1 is out. It will be touted as a bug fix but we all know that it will be designed to simply accelerate hardware decriptude.
Apple are in for a seriously serious wake up call in the next year if they don't get thier act together. They can't keep on treating customers like this. The only other piece of constructive advice I can give is this; if you own any Apple shares, sell now.
Jon.

Project very slow to restore broken links

Good morning! I have 12 RH projects that I work on weekly. A
lot of updates come from Word files and over the course of the week
the .cpd file in most of them gets large. So I rename it and
rebuild it launching the .xpj file. I often end up with a number of
broken links, but they can be quickly restored with Tools/Restore
Links. Except for 1. This project is a new file that is the result
of separating it from another project. I carefully recreated the
folder structure and imported all the topics. The project runs
fine. But when I rebuild its .cpd file the resulting broken links
take 30-40 seconds a piece to restore...since there are hundreds
and hundreds of broken links...this is not good. They all restore,
nothing is truly missing...but where can I look to see what the
problem is? My other projects, the links restore like popcorn and I
can stack keystrokes and let it work. This one is miserable.
There are no framesets...no video, nothing fancy. This is
just html text with a fair number of popup graphic images, normal
graphics and baggage files. Some files restore quickly so its not
universal....but it takes over an hour to put this project back
together when the others just fly.
We're still on RH 5.0 but have 7.0 in the building to test.
Is there anything specific I can look for in a topic that would
explain this behavior? I'm really stumped on this one...it just
doesn't act like the others! The project has 2600 files so this can
be painful. All suggestions are welcomed! I have a page full of
file names I notice 'hang'...but when I look at them I don't see
anything different. ???

As long as you are familiar with the concepts of HTML/XML
coding it's really easy. If you aren't, it'll look a little scary
at first. I'll post some examples to hopefully help. Make sure you
have RoboHelp closed, and I think you may also need to delete the
cpd file before opening the project again (I
think it remembers some of this stuff and will wipe out your
changes).
The fpj lists all folders and files in a directory. So for
example, this directory contains one subfolder and one topic:
<?xml version="1.0" encoding="windows-1252"?>
<rhpml majorversion="1" minorversion="0">
<folders>
<folder>
<name>Samples</name>
</folder>
</folders>
<topics>
<topic>
<name>Viewing_the_Log.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
</topics>
</rhpml>
If there aren't any subfolders, it should be like this:
<?xml version="1.0" encoding="windows-1252"?>
<rhpml majorversion="1" minorversion="0">
<folders/>
<topics>
<topic>
<name>Viewing_the_Log.htm</name>
<comments></comments>
<frameset>0</frameset>
</topic>
</topics>
</rhpml>
The main thing is to ensure you get the tag pairs correct. If
you are a bit concerned about getting it wrong, re-importing
(rather than restoring) all the topics "should" add them into the
fpj files correctly.
(fingers crossed that the code displays properly...
)

Project very slow to load

Hi, I am using LabView 8.6.1 to create a program that communicates to two Real time PXI units. I created a project and added the PXI targets no worries. Now when I load the project it takes up to 5 minutes to load. Any ideas why it is taking so long? There isnt even any VIs in the project yet. Cheers
Solved!
Go to Solution.

Hm, if the issue occurs with two different host systems, then i would rather think that there are maybe issues with the network. Are you aware of any changes/updates done by IT? Security patches, changes of software on router, ....
What you maybe can try is to isolate one of the host and connect one of the PXI using a cross cable directly to this host. Does the issue occur there again(still)?
You can format/reinstall one of the PXIs to do a cross check with one system with original state, the other with newly installed state.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

IOS 8 very slow with iPad 2.

Any suggestions on how I can speed it up?

Poke around in the settings. There's a lot of stuff that's defaulted to on that you may not need. Notifications for example, not only in the noification center but also in the apps themselves (settings, scroll down to the apps, explore the privacy and notification settings)
Look into background app update and background app refresh. These may be running in the background.
Close down extra running apps that you may not need. Double tap the home button, flick the previews up and off the screen to close any apps you don't need. Single tap the home button to exit the mode.
Turn off the predictive type in the keyboard settings.
basically, turn off any extra bells and whistles that you may not need, as well as shut down extra apps to free up as many resources as possible for what you need your device to do.

Flex 4.5.1 iOS project very slow

Similar Messages

Maybe you are looking for