Flex application not getting past preloader

Hi,
I have this Flex 4.1 application which sometimes refuses to show as it won't get past the preloader screen (I have attached a screenshot). The only solution is to refresh the page 2,3,4 or sometimes more times in order to get it to work. I've also tried running it in debug mode and then I'm not getting any errors so I don't know what is wrong here.. anyone have an idea? This is quite annoying, sometimes it works from the first time but mostly it doesn't.

Actually I found that there was an error when running in debug from Flash Builder. But I have the debug player installed so I'm not sure why the error was not thrown?

Similar Messages

  • I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    Make an appointment at the genius bar and get the phone replaced.

  • Pages 2.0 will not get past the "getting started" screen

    i just updated pages to 2.0 on ipad 2 retina (ios 7.0.2) and now i cannot open pages, it will not get past the "getting started" screen
    has anyone else experienced something similar?

    Had the same problem. This sovled it for me:
    Just let it load.
    In Keynote, I didn't have so many documents, so the freeze didn't take too long- that's how I noticed it's just a freeze while loading.
    For pages it took much longer. You can also turn off iCloud in settings for Pages, Keynote, etc. open it, re-enable iCloud in settings app again and quick switch back to pages (double-click home button). It will freeze up again, but after a while after all documents have been pulled from iCloud, it will be back to normal.

  • My 4th Gen Ipod touch will not get past the apple logo

    My 4th Gen Ipod touch will not get past the apple logo (unless the battery is dead, Then it tell me to charge it).  Once it gave me the connect to itunes screen.  I clicked restore in itunes but the ipod went back to the apple logo before the update download finished. I tried calling apple but my over the phone technical support just expired. PLEASE HELP! 

    This can be a corrupted software/firmware on your iPod touch. If the recovery mode you did was not forced, then try to force it into recovery mode. This is how:
    1. Force it to shut down (note: this sort of shut down should not be preformed unless you are in a situation like this because it is a hardware shutdown and will not attempt to unload software, save unsaved files, safely stop system processes, etc.) to do this, hold down the power/sleep button and home button for about 7 or 10 secs. Also I might be incorrect but I heard that you can just hold down the sleep and home button until the screen goes blank and then immediately let go.
    2. Have iTunes running. Hold down the home button and plug the USB cable that came with your iPod into it. Keep on holding on the home button until a picture of a USB cable going into the iTunes logo appears. You are now in a forced recovery mode. (In case your not so tech-savvy forced recovery is the same as a normal recovery mode that an iPod might do if it knows an update or restore failed.)
    3. iTunes should have shown a pop-up message about it found a iPod in recovery mode. Click OK, click your iPod from the sidebar and click restore. The iPod will show the apple logo for a while and iTunes will say "preparing iPod for restore" and then "waiting for iPod" this was the longest part of updates for me.
    4. iPod will reboot when restore is completed. When I update my iPod it one time showed the apple logo for one whole sync until it showed the slide to unlock screen, so do not worry. P.S if that does not work do a DFU mode restore ( I've been told DFU mode stands for device firmware update mode) I'm running out of room, so google it. Hope this helped ;)

  • I ttunes wants to keep on restoring my phone and I restored a few time now but can not get past the restore screen to load my purchaseed apps etc or sync my phone with new data, it sort of does not recognise the fact that i ihave synced already. Please he

    I Tunes wants to conituiosly restore my phone and after every restore it just goes back to the restore screen and i can not get past that to get to my apps etc.  It is as if the system does noet regognise the fact that the resotre has been done.................

    Follow this very helpful user tip by wjosten:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • IMac will not get past chime & white screen

    iMac will not get past chime & white screen. I have tried all the start up key combinations I can think of (d or c etc) with a start up disc, but no joy. The disc drives seems ok - you can hear it working & it will eject OK.
    Any other start up ideas, please?

    Have you tried a safe boot? If not, hears how (it's straight from Mac Help):
    To start up into Safe Mode (to "Safe Boot"), do this:
    Be sure the computer is shut down.
    Press the power button.
    Immediately after you hear the startup tone, press and hold the Shift key.
    Tip: The Shift key should be held as soon as possible after the startup tone but not before.
    Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.
    To learn more about Safe Boot check this page:
    http://docs.info.apple.com/article.html?artnum=107392
    Intel iMac (Early 2006)   Mac OS X (10.4.8)   2.0 Ghz, 1 MB

  • HT2173 my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto  app on my iMac bc a visa vas about 3:15 min

    my iMac will not get past the start screen, after i restarted it after it not being able to upload my photos from my iPhone 4S to iPhoto  app on my iMac bc a visa vas about 3:15 min.  What should I do to get my imac past this?

    According to your posted Profile here you are running a PPC based iMac.  This Forum is only for "Intel iMac's", and so to get the expert and correct help you need you should repost your question in the "PPC iMac Forum".
    Hope this helps

  • My macbook pro will not get past the gray screen with the apple logo and a loading bar.

    My macbook pro will not get past the grey screen with the apple logo after attempting to load for hours.  I have already tried resetting the NVRAM/PRAM and a couple other tricks and no luck.  Anyone out there have suggestions for my problem? Help would be much appreciated since i use my computer for everything at school and i am in desperate need to get this baby working again.

    You didn't say which OS in your tag, but maybe you might find something here.
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/PH4191
    http://support.apple.com/kb/PH7213
    http://support.apple.com/kb/HT4125
    http://support.apple.com/kb/HT2213

  • My MacBook Pro pwers up but does not get past the the Apple logo.

    I have a MacBook Pro with Mountain Lion.  It powers up but does not get past the Apple logo.  The hardware test did not reveal any problems.  It will also not get any further when I try to start up in Safe Mode.  The last thing I was trying to do was connect to it from my desktop which I have done before.  Any ideas.

    I was able to get into the Repair utility and resolved some Permissions problems.  It verified the disk and found no problems.  However, it did not resolve the issue.  I was also not able to get into Safe Mode.

  • I verified my email, then went to sign in and I can not get past the Sign In.

    I need some help. I made an account and verified my email. I then went to sign-in and a box pops up saying I need to review my account. I go back to review it and it takes me to the support page. In other words... I can not get past the Sign In.

    Thanks, Andrew for your help.  Not sure if you will see this, but I did the above and it said the HD was okay.  Rebooted it and still won't go past login page.  Tried it again and this time typed in the line /sbin/fsck -fy and then it came up and said HD was okay, but said something about being modified.  I once more rebooted, but it still won't get past the login screen.  Besides taking long to reboot, as before, I am able to enter my password, but then it hangs up with the rainbow icon rotating continuously.  Does this mean that the disk is corrupt or partially so, and if so, can you advise how I should proceed?  TIA again.

  • Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back o

    Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back okay --- except I got error messages that my "registration for Photoshop (I use CS4 Extended) and Photo Mechanic are no longer working".  I worked on Photoshop first, and tried (several times) to fix it with their online help suggestions.  Nothing worked.
    Is there a simpler way to "get my licenses/registrations back"???  I am also going to contact Camera Bits about the Photo Mechanic issues.   Thanks

    Same problem and for months now. I haven't been able to find a solution, but I suspect that's because I don't know exactly what's wrong.

  • I can not get past the setup screen on my reader. What am I doing wrong?

    I can not get past the setup screen on my reader.  What can I do?

    I have no idea what you mean; can you post a screenshot?

  • My macbook  air is frozen, can not get past login

    Hi my macbook air froze I can not get past the login
    Please help

    "stuck on the page I was trying to  load"
    Page as in webpage on a browser?
    Press Command + Option + Esc to force quit the browser.
    When you post for help, please state which OS X is installed.
    The more details you provide, the easier to help.

  • HT4623 I can not get past the license agreement and term and conditions page after updating my i5 IOS

    I can not get past the license agreement and term and conditions page after updating my i5 IOS

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help? I have tried the other  option that were posted. None of them worked!

    Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help?

    ExciteWalk wrote:
    I can't post the link here cause I'll probably get banned at this point. So help yourself and search rumors elsewhere
    That's not very helpful, why are you here?

Maybe you are looking for

  • Adobe Player problem on MacBook Pro

    I have both an iMac and a MacBook Pro. I have the latest Adobe Player on both. Using Firefox as browser on both. Yet when trying to watch videos embedded at sites on the MacBook Pro, videos that play fine on the iMac don't play on the MacBook Pro.  F

  • Registering a new TAG handler

    I need to parse a META tag from HTML document and I cannot do it with standard tag handlers. I think I need to set up a new tag handler. Please can anybody tell me how to do it?? I'll be graetful for any information.

  • Nokia hands free car kit & 6310i

    when i bought my ford st170,i had a hands free car kit fitted, after selling it i bought a new ford transit connect but not before removing it to fit it to the van.The hands free has a red wire,yellow wire and black wire plus two wires for the speake

  • How to completely delete an app from cloud

    I cannot get the latest firmware for HUE (1.1.5) from app store,  as the cloud has older version and continues to download it to ipad mini and iphone: ios7. Missing many features!

  • Client user ID

    I am using the 5.0 version of the VPN client. We are connecting to a 3030 concentrator. Once the client has connected is there any way to determine the user name that was used to log in?