Flex builder 4

Hi,
I have a question on the flash builder 4.
I want to know the backward compability in flash builder 4 for flash player runtime versions.
I have a kind of browser that supports only flash player 7 runtime. I want to develop flash applications using flash builder 4 tool using flash player runtime version 7.
But flash builder 4 compiler is asking for minimum flash player 10 runtime which my browser doesn't have. Is there the capability for flash builder 4 to run the applications using the lower versions of flash players(like fp7,fp6....fp1).
Thanks,
Shanenarrifield.

Hi,
Flash CS4 is an on going product and rightfully needs to support legacy flash code such as actionscript 2 which is part of the flash designer life cycle.
FlexBuilder is a newer product that began as a tool for actionscript 3/FP 9 so it supports the versions of flashplayer that support actionscript 3.
Flashbuilder supports both FP 9 through the flex 3.x sdk and the advantages of FP 10 with its optimised flex 4.0 sdk.
David.

Similar Messages

PDF Portfolio SDK setup - Navigator project wizard in Flex Builder 4.6 does not show

Hello, Experts
I am trying to build PDF Custom Navigator using Adobe PDF Portfolio SDK; however, for some reason, when performing step 3 of installation, Navigator project wizard in Flex Builder ( 4.6 ) would not show;
The plugins have been extracted to:
C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
The NavigatorSupport folder has been extracted to:
C:\Program Files\Adobe\Adobe Flash Builder 4.6\eclipse and ( just in case ) to
C:\Program Files\Adobe\Adobe Flash Builder 4.6\
any advice would be greatly appreciated
Best Regards,
-Alex

as per Joel's recommendation, used 4.5 instead - that worked just fine

Unable to download Flex Builder 3.0.2 Professional Eclipse Plug-in Trial

Since yesterday I am unable to download the Flex Builder plugin for eclipse, having tried all the combinations of Language/OS available for this product, browsers and two different PCs at my home.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=flex_eclipse
Using the link above the case is always the same no matter what browser/computer. After the "Download" button is pressed the website "freezes" for about 30 seconds, then it refreshes and soon an email message arrives with the title
"Helpful links and resources for your Flex Builder 3 Professional Trial".
Furthermore when I visit a link provided in the email Getting Started - Flex 3 Getting Started - Adobe Learning Resources, all the hyperlinks such as Watch, Full Tutorial, Download Project, PHP and Java will simply redirect me to the very same page (i.e. the one provided in this sentence).
I'd appreciate any help given on this matter, thanks.

Moving this discussion to the Flex Builder plug-in forum.

How to integrate a flex build in a web application running on jBoss 5.1

Hi,
I have two flex builds for a messaging application that I have to integrate with my web application running on Jboss 5.1 . I have tried hot deploying the builds into the default deploy folder of Jboss,but that approach doesn't seem to work(maybe because I may need to make war out of the flex builds). Can someone tell me an approach of how to accomplish this. Can I leverage BLAZEDS for this purpose.
Thanks
Rohit Kumar

Hi,
Go through Re: Web Dynpro and Smart Forms.
Regards,
Satyajit.

Flex Builder 3 will not work on Mac

Flex Builder 3 & Mac OSX:
The hard disk on my mac failed, lost everything, including
Flex Builder 2. I installed a new hard disk, and downloaded the
"trial" of Flex Builder 3 (FB 3). The software seemed to install
fine(no errors in the install log).
However, when I run FB 3, the default front page does not
load, and tells me that the flash player as stopped because of a
un-safe operation. I think okay, that is fine, but I do like the
page with the links to the docs, and adobe resources. I try to
build an app, default just dragged a button on the stage, and
complied. However, the page does not compile. I only get the "grey"
page, with no button.
After this I re-installed the flash player (9.0.115), but
still no love. I have re-installed FB 3, but the same results.
I am using Mac OS X (power PC). Can anybody help me. I am a
student at the University of Hawaii, and I am teaching myself Flex.
I am thinking that the error might be with the flash player, and I
am trying to install flash CS3, thinking that if I can get the
stand alone flash player that way, maybe then this will work.
Please help,
John

Hi Michael,
Thanks so much for all your help!
I just installed FB 3 again, but still no love, yikes! I
don't get it FB 2 was painless,...
I have the same issues, and safari does not handle any flex
apps, just a blank(grey page). Can I ask a favor? Can you check
this link, a flex charting app. It can view it perfectly in Camino,
but just a blank page in safari. Could you check this link in
safari?
http://cfhawaii.com/Charts/DrillDownWithEffects.html
I also still get the can't find the debugger player.
Maybe I need to take a on-line course(bring that I am in
hawaii) to learn how to get everything set up.
I send a bug report to adobe, and I am hoping that somebody
gets back to me, and can help me fix the problems, as I couldn't
even registrar FB3, I want to start learning flex, not dealing with
this.
Thanks so much for all your help`-`
John

How can I create an executable with Flex Builder 3?

I'm working with Flex Builder 3 right now and I've run my
head into a brick wall. Here's the situation:
I'm creating a standalone application (runs in its own
window, not in a web page) and I want to run it on a computer that
does not have Flex Builder 3 installed. Help files and web searches
haven't directed me to the right answer, so I was hoping that
someone on this forum could help. Anyone know how to create a .exe
file or something else that can be run outside of Flex Builder?
Thanks a lot for any help!

quote:
Originally posted by:
rob_parkhill
Convert it to an AIR Application?
Thanks Rob,
This may be what I'm looking for, but I don't know enough
about the difference. I guess I should have pointed out that I'm a
complete Flex Novice!
Anyway, with Flex Builder, I created an MXML Application. I
went through all my various options again in Flex Builder and found
that under the project menu, I could export a release build in what
appears to be the format you mentioned. I managed to create a .air
file, but it is not a recognized file type on my computer. I tried
double clicking it and the built-in windows services couldn't even
find a possible way to run it. Am I missing some important step?
Thanks again.

Flex Builder 3 Beta 3 Debugging not working with latest Flash Player Debug

First to emphasize that never had such issues with Flex
Builder 2 Beta 2 and Flash Player 9.0.47 Debug version.
I downloaded Flex Builder 3 Beta 3 and installed it. Then
trying to debug any Flex app (old or newly created) does not work.
I don’t get any errors, but after some research I saw
it’s nagging up on trying to connect to the Flash Player
debug version.
1. Uninstalled old versions of Flash Player (FP).
2. Downloaded latest debug version of FP 9 (9.0.115) and
installed it both for IE and Opera (Netscape-compatible).
3. Installed Flex Builder 3 Beta 3.
4. Created a simple Flex app.
5. Ran it in debug mode.
6. Showed a small window with title “Progress
Information” and a progress + text: Waiting for Flash Player
to connect to debugger…
7. Two minutes later I got the error: “Failed to
connect; session timed out. Ensure that: 1. You compiled your Flash
application with debugging on. 2. You are running the debugger
version of Flash Player.”
Any idea what is wrong? I tried to download an older debug
version but then FB 3 Beta 3 raises the error it’s expecting
version 9.0.115. I searched to download FB3 Beta 2 (because I
deleted it after downloading Beta 3) but unfortunately Adobe did
their best to wipe it out from their links.
Any help is welcome.
System Specs:
Windows Vista Ultimate
Flex Builder 3 Beta 3 Standalone
JRE 1.6 Update 3
-Dimitar

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

Flex Builder 3 Error: Unable to load SWC

Hi,
I am trying to use the YahooMaps component (YahooMaps.swc) in
my application. I have included it in the build path of my
application.
Steps followed:
1. Right-click on the project and choose Properties or open
the Project menu and choose Properties.
2. In the project properties dialog, choose Flex Build Path.
3. Select the Library path tab, and press the Add SWC...
button.
4. Selected the YahooMap.swc
I still get "Unable to load SWC: YahooMap.swc". It is an AS
3.0 component. Any help will be appreciated.
Thanks
Sumit

Hi Peter,
Thank you for your reply.
I have followed the documentation on the site you provided.
All I have done so far is:
1. Create a new flex project in Flex Builder 3
2. Once the project is created, I try to add the YahooMap.swc
to my Flex build path.
3. Once I add the YahooMap.swc, it fails with the error
"Unable to load YahooMap.swc" in Flex Builder 3.
4. FB3 does not recognize YahooMap when I try to import it in
AS3.
import com.yahoo.maps.api.YahooMap;
I am not sure what I am doing wrong. Does it have to do
something with the version Y! has used to build the YahooMap.swc
and Flex Builder 3?
Thanks
Sumit

Widget creation on Flex builder and related problems - need some help

Hi all.
I am trying to create a widget like application and it seems
I have made a mistake. As you know, desktop widgets are like small
stickers, they do not appear on taskbar and can be hidden or
docked.
The problem is that I created an AIR application using Flex
Builder 3 Beta and now I cannot find how to make that application
behave like custom-shaped window. My app appears on Windows taskbar
and I don't want it. When I drag the window (which is a custom
shape) it shows that nasty dragging rectangle around it.
As far as I found out (and tried it) I need to use cod like:
var initOptions:NativeWindowInitOptions = new
NativeWindowInitOptions();
initOptions.systemChrome = NativeWindowSystemChrome.NONE;
initOptions.type = NativeWindowType.UTILITY;
to hide my window from the taskbar. But it seems I cannot use
such a code for class mx:Application. Or can I (would be grateful
for some idea)?
The main question is:
if I want to migrate my app to that NativeWindow based
solution - then NativeWindow is not an mx class and I cannot find
how I will use Flex Builder Design mode to arrange my GUI elements.
Is it somehow possible to wrap my mx:Application inside
NativeWindow and do not have to migrate the design from mxml files
to pure ActionScript?
The second issue - if I want to use some kind of subforms -
like widget settings window - when I move that window with the
mouse, it is being clipped to the region of my Application. Does
that again mean that I need to use NativeWindow for creating such a
"Widget settings" dialog window?
Thanks for any ideas (and especially for useful links and
examples :-) )

Hi all.
I am trying to create a widget like application and it seems
I have made a mistake. As you know, desktop widgets are like small
stickers, they do not appear on taskbar and can be hidden or
docked.
The problem is that I created an AIR application using Flex
Builder 3 Beta and now I cannot find how to make that application
behave like custom-shaped window. My app appears on Windows taskbar
and I don't want it. When I drag the window (which is a custom
shape) it shows that nasty dragging rectangle around it.
As far as I found out (and tried it) I need to use cod like:
var initOptions:NativeWindowInitOptions = new
NativeWindowInitOptions();
initOptions.systemChrome = NativeWindowSystemChrome.NONE;
initOptions.type = NativeWindowType.UTILITY;
to hide my window from the taskbar. But it seems I cannot use
such a code for class mx:Application. Or can I (would be grateful
for some idea)?
The main question is:
if I want to migrate my app to that NativeWindow based
solution - then NativeWindow is not an mx class and I cannot find
how I will use Flex Builder Design mode to arrange my GUI elements.
Is it somehow possible to wrap my mx:Application inside
NativeWindow and do not have to migrate the design from mxml files
to pure ActionScript?
The second issue - if I want to use some kind of subforms -
like widget settings window - when I move that window with the
mouse, it is being clipped to the region of my Application. Does
that again mean that I need to use NativeWindow for creating such a
"Widget settings" dialog window?
Thanks for any ideas (and especially for useful links and
examples :-) )

[svn] 3120: When you point Flex Builder at a local sandbox trunk build, it couldn' t generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build

Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Error while running C:\Program Files\Adobe\Flex Builder 3\sdks\3.0.0\samples\explorer\build.bat

Hello
I am a flex beginner, when i run the C:\Program Files\Adobe\Flex Builder 3\sdks\3.0.0\samples\explorer\build.bat file the following error is displayed
Loading Configuration file C:\Program Files\Adobe\Flex Builder 3\sdks\3.0.0\frameworks\flex-config.xml
C:\Program Files\Adobe\Flex Builder 3\sdks\3.0.0\samples\explorer\loaderPanel.mxml
Error :-1
Please help me to run the bat file, as it will help me to learn flex independently.
error message is attached as bmp.
Thanks in advance.

Hi,
Take a look at this report: https://bugs.adobe.com/jira/browse/FB-11626 It might be of help.
With best regards,
Barna Biro
Blog: http://blog.wisebisoft.com

Creating a project in Flex Builder for the Hybrid Store sample Application

Hi all,
How to create a project in Flexbuilder for the hybrid store
sample application.
I downloaded the source code of hybridstore application,
Now i have to create a project for it to run that application
in my system,
will you please tell me how to create a project for this
sample.
I have also read the readme.html file. but i could not follow
exactly what they are saying.
what i did is, I unzipped the source code into a folder
hybridstore.
I opened the flexbuilder : File -- new -- flexproject ( i
have selected) then i have given name to my file (hybridstore) ,
and set the path to the hybridstore folder where the source code
exists.
but it as created hybridstore.mxml file also.
it is not working.
will you please till me how to create project for this
application.
I have created project for other samples like restaurent
finder, dashboard. they are working fine.
I got problem with this sample only.
Thanks in advance
Regards
Avanthika

Hi,
thanks for your reply,
I have tried to open using file import, but still it is not
working.
in the readme file for this application , contains how to
Creating a project in Flex Builder for the Hybrid Store
application:
Name your default application catalog.mxml.
Prevent Flex Builder from generating an HTML wrapper: select
Project > Properties. Select the Flex Compiler page, deselect
the Generate HTML wrapper file option .
Create a Run configuration for your project but deselect the
Use defaults option and instead assign the Run setting to the
hybridstore.html in your project's bin directory.
To enable debugging of the Hybrid Store application you must
create a copy of hybridstore.html. Open it in an editor (you can
right-click on the file and select Open With > Text Editor).
Find the line that says "src", "catalog" and change it to "src",
"catalog-debug". Assign the Debug setting to this new HTML file.
As i am new to flex , i could not know how to do this.
please help me how to do this.
regards
Avanthika

Error: The folder does not contain a valid Flex Builder Project.

HI All,
My first Post here. I am new to Flex Hardly 10 days old. I
want to open the flexstore project in flex builder 3 and could not
able to do so.
What I did: file->import->.... got the error msg as
"The folder does not contain a valid Flex Builder Project".
also tried file->import->general->..... same error
msg.
I need your Help guys
I downloaded the sample project from
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Thanks in Advance
SAS
Text

"shakeb66" <[email protected]> wrote in
message
news:gknbn8$av9$[email protected]..
> HI All,
> My first Post here. I am new to Flex Hardly 10 days old.
I want to open
> the
> flexstore project in flex builder 3 and could not able
to do so.
> What I did: file->import->.... got the error msg
as "The folder does not
> contain a valid Flex Builder Project".
> also tried file->import->general->..... same
error msg.
> I need your Help guys
> I downloaded the sample project from
>
>
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Try creating a new Flex project and dragging the files from
the zip into the
src folder. You may find that you need to rearrange things a
bit, depending
on how they set up the project, but this should get you
started.
HTH;
Amy

Flex Builder 2 - failed install on Windows Vista

I have tried several times to install the trial Flex Builder
2 on Windows Vista. Each time I get an error message referring me
to the error log. The error log is listed below. Note, each time I
do the install, I uninstall the previous install and then delete
any files or folders remaining.
===================================
Error Log
===================================
!SESSION 2007-02-10 22:04:25.583
eclipse.buildId=unknown
java.version=1.4.2_12
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.update.configurator 2007-02-10
22:04:26.499
!MESSAGE Cannot backup current configuration
!ENTRY org.eclipse.update.configurator 2007-02-10
22:04:26.575
!MESSAGE Could not rename configuration temp file
!ENTRY org.eclipse.osgi 2007-02-10 22:04:27.389
!MESSAGE Application error
!STACK 1
java.lang.UnsatisfiedLinkError: no swt-win32-3139 in
java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at
org.eclipse.swt.internal.Library.loadLibrary(Library.java:123)
at
org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:18)
at
org.eclipse.swt.widgets.Display.<clinit>(Display.java:125)
at
org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:381)
at
org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:155)
at
com.adobe.flexbuilder.standalone.FlexBuilderApplication.run(FlexBuilderApplication.java:4 5)
at
org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at
org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.main(Main.java:948)
!ENTRY org.eclipse.osgi 2007-02-10 22:04:27.396
!MESSAGE Bundle
update@plugins/com.adobe.flexbuilder.debug.e32_2.0.155577/ [70] was
not resolved.
!SUBENTRY 1 org.eclipse.osgi 2007-02-10 22:04:27.396
!MESSAGE Missing required bundle
org.eclipse.debug.ui_[3.2.0,99.0.0).
!SESSION 2007-02-10 22:15:47.733
eclipse.buildId=unknown
java.version=1.4.2_12
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.update.configurator 2007-02-10
22:15:48.505
!MESSAGE Cannot backup current configuration
======================================================
Any help would be appreciated.
Thanks,
Wayne

Thank you for your response. Being a newbie to Microsoft
Vista (which I recommend the world to reject) I don't know exactly
how to describe how I got the install of Flex Builder 2 to work.
But, a friend of mine walked me through turning off the Windows
Defender security settings as well as all security settings related
to my user's setting. I believe I disabled two Vista "features",
and then the install worked. The only thing was that the checkboxes
during the install program did not appear, but clicking the
respective questions themselves did the trick (i.e. do you agree to
software license?' and 'install Flash player on IE / Firefox?')
Sorry I can't be more specific... but, for anyone that has
this problem, in the words of my friend, "Turn everything off in
Vista you can, then try it!".
Good luck,
-sutton

Flex Builder 3 Beta 2 Expires early when using Flex 2 key, and new SDK

I was told to use my Flex 2 key to extend the Beta period for
Flex Builder 3, this worked, today it said I have 99 days left.
but When I installed the latest SDK and restarted Flex
Builder 3 Beta 2, it says it expires in 15 days.
If I put the original SDK back and restart it goes back to 99
days, so If I switch the SDKs while Eclipse is already loaded it
seems to stay at 99 days, so now before I start Eclipse I have to
move the orig SDK back, start Eclipse, then switch SDKs.
This does not make much sense to me, why does the SDK affect
the Builder Beta Period at all? is there a fix for this, I have a
project due but 31st, and I would be screwed if it dies before
then, I already have flex 2 but I cannot roll back as this project
relies on Flex Builder 3 Functionality.

I the probelm we are stating is that we DID enter our flex 2
key and it DID initially set the expire date out, but I needed to
use a later SDK and thats when the problem occured. without the
latest the ImageSnapshot.captureImage does not work at all for me,
so must use a later SDK. However this morning my Eclipse started
stating 96 days remaining and I am still using the latest SDK, so
no idea why it works sometimes and not others.

Anyone been able to install Flex Builder 2 on Vista?

I am trying to figure out if there is a way to get Flex
Builder 2 to install
on Vista RTM yet. I can get Flex Builder 2.0 installed but
when I try to
perform the 2.0.1 update I get an error from the Install
Anywhere
application that I need to "select another location to
extract the installer
to" but no matter where I install it or if I try to run it
from the temp
folder as the error is displayed it doesn't work.
I know this is only like the 2nd day or so Vista has been
available to the
public but I am just wondering if anyone has had any luck so
far with
perhaps a beta or the business release?
Thanks,
-Dan

In case anyone else is having this trouble I found out a way
that I think is
able to update Flex Builder to 2.0.1. If you download the
updater on an XP
machine then use WinRAR to extract the files in the .exe you
should be able
to move that whole folder onto the Vista machine then run the
FlexBuilder2_Updater.exe file from there without any problems
or errors (I
set that to have admin and run in XP SP2 compatibility just
to make sure).
So far it seems to be working fine.
-Dan
"Dan" <[email protected]> wrote in message
news:epppn0$f4p$[email protected]..
>I am trying to figure out if there is a way to get Flex
Builder 2 to
>install on Vista RTM yet. I can get Flex Builder 2.0
installed but when I
>try to perform the 2.0.1 update I get an error from the
Install Anywhere
>application that I need to "select another location to
extract the
>installer to" but no matter where I install it or if I
try to run it from
>the temp folder as the error is displayed it doesn't
work.
>
> I know this is only like the 2nd day or so Vista has
been available to the
> public but I am just wondering if anyone has had any
luck so far with
> perhaps a beta or the business release?
>
> Thanks,
> -Dan

Flex builder 4

Similar Messages

Maybe you are looking for