Flex debug not working in FB3r3 on web apps

I am developping a Flex application for an Apache Tomcat 5.5
server.
I installed eclipse 3.3 with the FB3r3 plug-in (after
uninstalling Flash as requested). To test all was well I created a
simple web application with server type 'none' the Flex debugging
worked fine. However, if I set the server type to J2EE with a
Tomcat 5.5 server the Flex debugging does not work with the same
application.
I have tried switching web browser from internal to default
system (IE) (the browser used with the 'none' application), but
this didn't help.
What have I missed? Any help appretiated.

Well... even though the upgrade brought all the settings over
from CF7, the debug settings weren't implemented. The setting was
checked like it was implemented but it wasn't. To fix, uncheck and
save your settings. Then recheck the debug setting and save.

Similar Messages

OC4J JSP Debugging not working for all the jsps

Hi,
Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
1) global-web-application.xml is modified
Changed the attribute development="true" in orion-web-app
Added the below init param for the JspServlet
<init-param>
<param-name>debug</param-name>
<param-value>class</param-value>
</init-param>
If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
Project Structure:
Test (Eclipse Dynamic Web Project)
-WebContent
Sample.jsp ( Breakpoints are working)
-subF (Folder)
SubSample.jsp (Breakpoints are not working)
-WEB-INF
web.xml
Debugging worked for http://localhost:8888/Test/Sample.jsp
Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
Any help is highly appreciated.
Regards
Danny

This tells there is not enough main memory (not disk space) for the program to run.
- You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
- Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.

I had problem with my CD-rom, it not able to open. On top of that recently my PC crashed.
I managed to install other software, but not able to install CS5 Web Premium.
Ive downloaded the electronic version via Adobe Downloads, but not able install it.

I have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

Sound alerts not working in Mail and Ichat apps since upgrade to 10.4.9

I just noticed my Sound alets not working in Mail and Ichat apps since upgrade to 10.4.9.
I'm using soundsticks which is playing sounds thru quicktime, itunes, etc but my alert sounds for getting new emails and IM messages is not working. I get the quick "white flash" on the screen instead. I checked the prefs on both apps and it is set to give me the alert sound, I can even test it in the ichat pref when I change the new message alert sound it will play it thru my speakers but when I get a new message in either app it just gives me the white flash.
I'm read that it can be an issue of not having the balance in the system sound pref set the middle, so I checked that, restarted, all that but still no luck.
I really like the sound alert features because I can be in another part of my house, turn the sound way up and I'll know when one of my clients is trying to reach me but now I can't do that.
Any ideas?
Thanks in advance!
Brown.Recluse

Ok, weird, strange...did ONE more restart and now its working fine...who knows?
Me

Flex Builder 3 Beta 3 Debugging not working with latest Flash Player Debug

First to emphasize that never had such issues with Flex
Builder 2 Beta 2 and Flash Player 9.0.47 Debug version.
I downloaded Flex Builder 3 Beta 3 and installed it. Then
trying to debug any Flex app (old or newly created) does not work.
I don’t get any errors, but after some research I saw
it’s nagging up on trying to connect to the Flash Player
debug version.
1. Uninstalled old versions of Flash Player (FP).
2. Downloaded latest debug version of FP 9 (9.0.115) and
installed it both for IE and Opera (Netscape-compatible).
3. Installed Flex Builder 3 Beta 3.
4. Created a simple Flex app.
5. Ran it in debug mode.
6. Showed a small window with title “Progress
Information” and a progress + text: Waiting for Flash Player
to connect to debugger…
7. Two minutes later I got the error: “Failed to
connect; session timed out. Ensure that: 1. You compiled your Flash
application with debugging on. 2. You are running the debugger
version of Flash Player.”
Any idea what is wrong? I tried to download an older debug
version but then FB 3 Beta 3 raises the error it’s expecting
version 9.0.115. I searched to download FB3 Beta 2 (because I
deleted it after downloading Beta 3) but unfortunately Adobe did
their best to wipe it out from their links.
Any help is welcome.
System Specs:
Windows Vista Ultimate
Flex Builder 3 Beta 3 Standalone
JRE 1.6 Update 3
-Dimitar

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

Trace/Debug not working

I am not seeing traces in the xsengine trace log; nor am I able to effectively set breakpoints in the Web Editor and stop page processing. I'll start by defining roles and configuration, describing actions that aren't working, and then finish with 2 questions.
ROLES AND CONFIGURATION
According to the developer guide, the following configuration and roles need to be in place for tracing and debugging to work. This is our current role state:
User assigned Debugger role
To change Trace level, user assigned TraceAdmin role
User assigned TraceViewer role, child role of Developer
To view tracing, confirm the following configuration. This is our current config state.:
In the xsengine.ini file, the debugger > enabled node is set to true
In the xsengine.ini file, the httpserver > developer_mode node is set to true
ACTIONS
To start tracing, set the Trace level for your package, e.g., debug. Include a trace call in the code, e.g., $.trace.debug("testing debug trace"). In the Web Editor, run the xsjs file, and in the resulting browser window, click the Call Backend button. Here is where my issues begin: there is no Call Backend button, in any browser version.
To start debugging, set breakpoints in the Web Editor by clicking the line number. A breakpoint is indicated by a red arrow on the line number. Then run the page. The page should stop processing at that point. (You can also set breakpoints in Hana Studio by running in Debug perspective, and setting a debug configuration. I tried this also, but was unable to create a desired configuration for port 443; this is a separate issue, outside the scope of this discussion.)
QUESTIONS
What am I missing in setting up tracing?
What am I missing in setting up debugging?
Thanks in advance for any guidance.
Bill

Krishna,
Thank you for your response. Running breakpoints in the Hana Studio debug perspective has its own set of challenges for us. The web server is using ssl, and thus is set to port 443, rather than port 80(server instance number). I have not been able to successfully create a configuration for running xsjs scripts through Hana Studio. But I'll keep trying.
Bill

Flash CS4 Debug not working

I have both CS3 and CS4 web preium installed on my system. I
have started working in CS4 and found that the debug window will
not work. I created a new Flash CS4 fla and added some breakpoints.
It seems to run without stopping at the breakpoints and displaying
my trace statements. I have a ticket into support but no one has
answered it yet. I remember this happening when I installed CS3 web
pre but can't remember what I did to fix it. Is a uninstall of all
the products neccessary? Or should I just uninstall Flash. Any
comments welcome. I hate calling support and talking to some person
in another country that does not have a clue how to fix
ANYTHING!

The text in the output window reads:
Attemping to launch and connect to Player using URL
F:\CS4\NewTest.swf
I have a breakpoint in there but the movie seems to ignor it
and does not show anything or stop. When I close the swf debug
window I get:
Debugger launched failed. Debug session will terminate.
Then I am back in. I think this happened in CS3 as well but
can not remember what I did to fix it. I have made my own workspace
and have tried others as well with the same results.
THanks for getting back to me. Right now I don't have time to
uninstall and reinstall. Project deadlines and all that. I am still
using CS3 on the same machine.
I really like the new interface design you guys built! Really
helps with my Windows Vista Ultimate and issues with Flash CS3 as
well.
Thanks for getting back to me.

Apply Button not working in Report viewer web part in SP 2013

I have a SSRS report which gets values from SSAS cube, with more than 10 parameters defined in the report. All the parameters are multi-select parameters and the report is deployed in SharePoint 2013 integrated mode.
I created a web page and integrated the SSRS report inside a report viewer web part. All the report parameters are from Performance Point filters. All the PPS filters are connected to SSRS report.
The problem is each and every time the parameter is re-selected(changed) the whole page gets refreshed.
So I added a Apply button, so that the report gets refreshed only after clicking the Apply button. Even after adding the apply button the report gets refreshed on each parameter change.
Can you please let me know why the apply button is not working and possible solutions to overcome this.

Hi,
There's no much similar issues I have found.
I suggest you consider opening a support case with us, provided the sample code for reproduce and version of SQL Servr. You may visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone.

Several Standard functions are not working properly in CRM Web

We are working on different ABAP developments embedded on a Web environment, and we are facing some issues with different standard functions. This functions such as GUI_DOWNLOAD, GUI_UPLOAD, MS_EXCEL_OLE_STANDARD_DAT, POPUP_TO_CONFIRM which are used in the ABAP developments work fine on the GUI environment while in the WEB environment they do not work.
This functions allow us to perform files uploads and downloads in .txt format as well as in .xls format.
Some of the suggested solutions were to solve this by using BSP application or Web Dynpros.
Does this WEB tool contain any update, SAP note or any function which may replace the 4 functions mentioned above is order to solve this issue?
Thanks in advance
Best Regards,
Alexis Chavero.

There are no standard functions in Web UI that replicate what these functions do in GUI. This was discussed before [here|Read file from presentation server (like GUI_UPLOAD);. As far as I know, we have to code ourselves. One way to try is published [here|http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebUI-UploadingdatafromExcelfiles].

SSO using spnego set up but not working for an Enterprise Web Service

Hello, I am looking for some guidance. I have a function module that is exposed as a web service. I am trying to be able to access the web service with sso so the user does not need to logon. Systems has set up SSO using spnego to issue sap login tickets on our dual stack and sso is working if I try to access a netweaver link such as http://mycompany:8001/nwa but it is not working when I try to access my service
http://mycompany.com:8001/sap/bc/srt/rfc/sap/myservice/500/myservice/myservice. I am wondering why this would not work and if it is possible to use sso with enterprise services?
Thanks for any help...we have been stuck for a while now.
Edited by: Katie Doody on Jul 13, 2011 3:48 PM

Hi, I have created the redirect app with a jsp page in it. So, would you be suggesting that I add another call within there? In the error pages section of my web service in sicf I have the redirect going to my redirect jsp which is then sent to my web service.
http://myserver:50100/redirectApp/redirect.jsp?to=http://myserver:8001/sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_insert
Here is part of the the log from SMICM. It looks like I am making a connection but I am not sure what to look for to determine if the tickets is being sent and received.
Thr 4824] HttpSubHandlerClose: Call Handler: HttpSAPR3Handler (00000001404EABA0), task=TASK_CLOSE(3)
[Thr 4824] HttpSubHandlerClose: Call Handler: HttpJ2EEHandler (00000001404EAA70), task=TASK_CLOSE(3)
[Thr 4824] HttpJ2EEHandler called: task=3
[Thr 4824] Handler 3: HttpAuthHandler matches url: /sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_ins
[Thr 4824] Handler 4: HttpCacheHandler matches url: /sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_in
[Thr 4824] Handler 2: HttpSAPR3Handler matches url: /sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_in
[Thr 4824] Handler 0: HttpJ2EEHandler matches url: /sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_ins
[Thr 4824] HttpSubHandlerCall: Call Handler: HttpAuthHandler, task=1, header_len=647
[Thr 4824] >> start >> CsiGetInstance(0000000000E79950)
[Thr 4824] << end   << CsiGetInstance(0000000000E79950) returned inst=00000000005A5030
[Thr 4824] >> start >> CsiExecute(00000000005A5030,000000000CB19CE0,85,1,000000000CB19CD0,000000000CB1BE10,0)
[Thr 4824] >> VsaScan(00000000005A72F0,000000000055D750,000000000055D790,00000000005B94F0,NULL) >>
[Thr 4824] << VsaScan(00000000005A72F0,000000000055D750,000000000055D790,00000000005B94F0,NULL) = 0 <<
[Thr 4824] << end   << CsiExecute(CSI_RC==VSI_OK)
[Thr 4824] >> start >> CsiFreeInstance(00000000005A5030)
[Thr 4824] << end   << CsiFreeInstance(CSI_RC==VSI_OK)
[Thr 4824] HttpSubHandlerItDeactivate: handler 0: HttpAuthHandler
[Thr 4824] HttpSubHandlerCall: Call Handler: HttpCacheHandler, task=1, header_len=647
[Thr 4824] HttpCacheHandler: 1 647 00000001404EACD0 0000000000000000
[Thr 4824] ISC: Cache Lookup. 1. try: browser independent.
[Thr 4824] ISC: hashed querystr = 7e8c2651 'null&*&'
[Thr 4824] HttpCacheMakeObjectKey() -> '/sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_insert&&&GZ=1&
[Thr 4824] MTX_LOCK 1635 0000000000E77AA0
[Thr 4824] MTX_UNLOCK 1766 0000000000E77AA0
[Thr 4824] IctCmOpen#3977 R '/sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_insert&&&GZ=1&1562C8E7&'.
[Thr 4824] MTX_LOCK 1635 0000000000E77950
[Thr 4824] MTX_UNLOCK 1766 0000000000E77950
[Thr 4824] IctCmOpen#11089 R '/sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_insert&&&GZ=1&1562C8E7&'
[Thr 4824] ISC: Cache Lookup. 2. try: browser specific key.
[Thr 4824] ISC: hashed querystr = 83bd39d4 'null&Mozilla/4.0 (compatible; MSIE 8.0;&'
[Thr 4824] HttpCacheMakeObjectKey() -> '/sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_insert&&&GZ=1&
[Thr 4824] MTX_LOCK 1635 0000000000E77AA0
[Thr 4824] MTX_UNLOCK 1766 0000000000E77AA0
[Thr 4824] IctCmOpen#3978 R '/sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_insert&&&GZ=1&4D93DB38&'.
[Thr 4824] MTX_LOCK 1635 0000000000E77950
[Thr 4824] MTX_UNLOCK 1766 0000000000E77950
[Thr 4824] IctCmOpen#11090 R '/sap/bc/srt/rfc/sap/zsd_hr_cats_insert/500/zsd_hr_cats_insert/zsd_hr_cats_insert&&&GZ=1&4D93DB38&'
[Thr 4824] HttpCacheHandler: cache miss.
[Thr 4824] HttpSubHandlerItDeactivate: handler 1: HttpCacheHandler
[Thr 4824] HttpSubHandlerCall: Call Handler: HttpSAPR3Handler, task=1, header_len=647
[Thr 4824] HttpSAPR3Handler: url_tab_init: 1, force_dest: 0
[Thr 4824] ICT: IctLookupPathTable() -> 0
Thank you,
   Katie
Edited by: Katie Doody on Jul 22, 2011 3:25 PM

Debugging not working in weblogic portal

When I am running my portal app built on weblogic portal 8.1, its throwing an error cannot start debugger. App might not be deployed properly.
I have redeployed 2-3 times, and its running also fine, but debugger is not working.
when the app domain starts few exceptions are thrown like,
primary key voilated,
jms connection pool could not connect
Can this be the reason?

well, from a debugging perspective, the application errors should not prevent a debugger from attaching to the VM. Can you be more specific about when you say the debugger is not starting?
Thanks
Mike

InDesign CS4 Debug not working on Windows

Dear All,
Two days back I purchased Bronze ASN memebership. This is the first time when I am trying debug version of InDesign. I have installed InDesign CS4 Debug on both Mac & Windows. On Mac it is working fine, but on windows it is not working.
Debug Indesign is not getting launch and asking for re-installation. I have re-installed 2-3 times. Release version allready installed one my PC. I have tried with differeent combination like "install without Release version of InDesign", "insatalled on different drive", etc.
I hope some one can help me to resolve this issue.
Regards,
Rajeev

I think the Adobe terminology is Required not recommended, but the
recommended build environment for CS4 plugins is Visual Studio 2005 plus
service pack 1.
As has been said many times on this list, and I can confirm from painful
experience, you may have problems if you try to build your plugins with VS
2008.
Caerwyn

Authentication and Debugging not working -- since Saturday, July 12

Hi everyone,
Since Saturday (July 12), the iTunes U launcher that my institution uses (a Moodle block) has ceased successfully authenticating users. From all the looking I've done, nothing has changed from our side, although I am having to do the investigation remotely, and can only be about 95% certain of that so far.
I'm also not able to use the debug string to see what credentials are being sent to iTunes U, because there appears to be no difference in the launcher process, whether debugging is enabled or not.
Is anyone aware of any changes or glitches in the system in the last few days? Any information at all will be very greatly appreciated.
-JR

Woolamaloo lives to help with such problems. Woolamaloo is an application specifically designed to access your iTunes U site without any CGI, BlackBoard or Moodle building blocks, etc. It accesses your site directly ... using any credential you supply. In effect, you can use it to "be" any user at your site. It can even show you Apple's debug webpage (if you want to see it). You can use Woolamaloo to verify that your site is not working ... or that it is and you have a local problem. You can find out and download the app here:
http://itunes.uic.edu/Woolamaloo.html
It comes in both a Windows and Mac OS version (though I admit to having a Mac OS X bias).

Flex debug not working in FB3r3 on web apps

Similar Messages

Maybe you are looking for