Flex Installation

hi all,
Can anybody tell me the procedure for complete installtion of flex developement environment
also the dependand objects. like flex SDK, Flex builder, java ,IDE
Please mention the sequence of installtion

If you're installing Flex/Flash Builder then you don't really need to do anything else (Flex SDK, Flash Debugger etc is included in the install, the builder is the IDE). Just install it as you would any other app, unless you're doing something different such as installing the Eclipse plugin for existing Eclipse installation.

Similar Messages

What Does Flex Installer Check in Eclipse DIR?

I'm using EasyEclipse which is bundled eclipse package and
Flex installer isn't recognizing it even though the directory
structure and file names are the same. it is using 3.1.2 Eclipse
SDK.
So what is flex looking for whenever it installs into an
eclipse folder? The 'plugins' folder and 'features' folder is
there. The file size of eclipse.exe is the same as a traditional
eclipse install. This is the error:
Eclipse 3.1 Not Found
Please choose an existing Eclipse 3.1 (or greater) folder to
be updated.
This folder must contain the standard Eclipse folders named
"plugins" and "features".

I just spent 2 hours on a chat with them... Turns out... He says I have High Speed Internet, I say I have High Speed Internet Enhanced He tells me I should be happy with my speed test, I tell him I should be receiving what I am paying for and it is beneath the 3.1 Mbps to 7.0 Mbps I am paying for. He says the repair service cannot see my account stuff only billing. I insist I am paying for High Speed Enhanced. 2 hours in I am told that Repair is arguing with Billing over what service I have. I tell him Billing will win. He finally calls me direct, and am told to close the chat. I am told I am correct all along and will receive credit to my account for them not giving me the proper speed for years of service I paid for and did not receive. -------- I could not understand half of what he was saying to me. He says he will not e-mail me any information. I have no clue his name because try as I might I could not understand him. He says it will resolve in a few days and they will contact me. This is service? I should now take the word of a company that has underserved me for years, from a guy on the other side of the world who cannot be understood and who is unitelligible over the phone, that won't send me any of the information via e-mail and had me intentionally close the chat session that they will properly resolve this issue.

Flex installation and serial number, activation problem.

Hello guys,
After the installation of Adobe Flex Builder 3 in my pc, I provide the right serial number
to the software to activate it. The software takes the serial as good, but
when I close and then I open Flex again, he ask the serial again.
I do this with administrator account…
Someone had the same problem?
Do you know if it should depends on Windows Vista configuration?
Note: this Flex license was used in other old Pc that now still not working.
Thank you, Fabio.

Vihamil are you utilizing the serial number registered under your account at http://www.adobe.com/. You can find more details on how to locate your registered serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Flex installer crashes

First of all, I hope this is the right place to ask my
question.
I've downloaded Flex Builder 2, the trial. But everytime I
try to install this app, my pc crashes, it gives me a bluescreen.
The strange thing is that a week ago nothing went wrong and
the installation went fine. But I installed it at a wrong place so
I uninstalled it...
I think there is a conflict between windows and the
installer.
Does someone recognize this situation?
Thanks a lot and sorry for my bad English.

Hi there,
I have faced a similar issue before. I had an old machine
with only 512MB RAM. At that time, flex 2 builder used to crash
frequently. Carsh used to happen usually when I tried to create a
new project or start flex2 builder.
What I tried was to remove the flex builder 2 folder in my
documents and keep it safe in some other drive . Now I tried to
start it again and it worked. I feel its coz of low virtual memory
, that this problem has occured. May be or may not be but it was a
trial and error method. that I used.

JAWS Scripts for Flex Installation

Hi,
I'm trying to update JAWS for my computer to use on a particular website that I have to have this for. However when I go to update my file i get this error,
"Your installation of JAWS seems to be corrupted. Please reinstall JAWS and run this installation again. "
I can't find it in my programs, So i'm not sure where to begin to unintsall this to reinstall. I've already uninstalled and reinstalled Adobe Flash Player which is part of what I need for the website as well.
Any suggestions?
I'm going to keep looking.
-Dkerste

JAWS is not an Adobe product, so I don't know how we can help you with this. But the message you get is pretty clear: reinstall/repair JAWS before running the update.
You also mention Flex, which has its own forum http://forums.adobe.com/community/flex

Flex default error language - please help

I jave just installed the trial of FLEX BUILDER 2 on my
computer.
I have a windows XP media center edition in Italian.
My flex installation is in English. And I have other Adobe
products also in English.
But... in the PROBLEMS pane and for every output I get the
messages in ITALIAN. And I want to get everything in english!! It's
so difficult to search for someting when you get an output in
italian.
Any suggestions on whas should I do?

Hi ottocid,
This seems to be a out an out FlexBuilder question. I'll try
and get to the bottom of this. But It would be great if you post it
in the FlexBuilder Forum. There are a lot of FB engineers taking a
look at it.
The FlexBuilder Forum is here -
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=60&catid=582

Installing Flex SDK into Flash Builder 4.7 problems

Hi,
Im completely new to Flash Builder, today I have installed Flash Builder 4.7 & Flash CS6 from Creative Cloud for my son to start to learn game programming (with my help), I have used simple coding in web design however this terminology is new to me.
I bought my son the latest 'Foundation Game Design with ActionScript 3.0' book on recommendation but it was written when FB was version 4.5 so im guessing this might be the problem.
The book is very easy to follow but have hit problems at the beginning of the tutorials, the book talks about Flex SDK but it seems that FB 4.7 uses AIR SDK ?
So the first project called HelloWorld, we got up to:
Got an exclamation mark which said
'The import flash.display.Sprite is not used
locally'
Continuing with the rest of the project the exclamation mark disappeared:
However on selecting run- Debug we got a blank Flash Player window ('generate HTML wrapper file' was deselected)
So either we've done something wrong, or the book and FB version are not compatible?
Any advice would be great!
Thank you
Latest ...
I thought that installing Flex SDK may solve the problem but after following instructions I have the error message, see image below. Really stumped now!

Sorry, if I went a little overboard. After re-reading your post, perhaps I should back up a little.
First, there are little things that Flash Builder (FB) will complain about. Having extra import statements in your code doesn't hurt anything. If I'm trying different solutions and then commenting out the code, the import statements will hang around, FB will complain, but just ignore it. If you see a little icon on the left edge of your code editor and its a red circle with an X in it, then that is something that will have to be fixed.
When you create an app in FB or Flash you can choose to create a web app which means it will run in a browser window. The project can optionally create an HTML wrapper, or web page that will load your app. In Flash Pro you can choose File->Publish Settings and there will be a checkbox on the left to publish a HTML wrapper. In FB, you can right click your project in the Package Explorer, select Properties at the bottom, select the ActionScript Compiler, and down at the bottom there will be a checkbox to create a HTML wrapper.
If you're just learning Flash Builder, then the FlexSDK 4.6 and the AIR SDK 3.1 that comes with it should be fine. You mentioned Apache SDK and I'd recently been working with that so I ended up getting side-tracked.
Getting an AIRSDK to work with when build ActionScript projects is easy. Just go to the adobe site, type AIR SDK in the search box, and you should find a page that will let you downloaded the latest version. There's also a page to let you download the latest AIR runtime, and if you were just going to run AIR apps and not build them, then that's all you would need. As a developer you'll want to install the runtime from the downloaded .exe file. With the SDK, after downloading it, installing it is easy. Just create a new folder an unzip the SDK into it, then place it somewhere easy to find. I put all my SDK's in their own directory right off the c: drive. So I have c:\AIRSDK_3.5.0.880 and c:\AIRSDK_3.7.0.1530. I use very descriptive folder names so I always know which SDK's I have to work from.
To use the SDK in Flash Pro select Help -> Manage AIR SDK, hit the plus button and add the folder you created. Now when you've opened a Flash project, you go to File->Publish Settings and select the combo box at the top, you'll see options like 'AIR 3.7.0.1530 for Android' in the list that reflect the SDK's you've added.
Generally with FB you'll be using a FlexSDK, or perhaps a FlexSDK overlaid with a newer version of AIRSDK. Overlaid basically means you copied the contents of the AIR SDK into the Flex Folder. The article I mentioned above will give you all the details on creating those. For instance, I downloaded the Apache Flex installer, installed it, then created an empty folder called c:\ApacheFlexSDK_4.9.1, launched the Apache installer, gave it the new empty folder I'd created, selected all the download options, and let it all download. If it launches a popup box or a security warning, you can allow it, and it will continue. Once you have the SDK and you want to use it with a project in FB, just right click the project, select Properties, selected that Compiler tab again, and up in the right corner you'll see 'Manage SDK's...'. Hit that link, add your new SDK to the list and give it a descriptive name, then selected the checkbox beside it to set it up as your default. If you do this, then all your projects set to use the default will automatically switch to it and rebuild. So if you want a project to stay with a specific SDK then select that option in your Compiler tab, and then you could use the combo box to select your new added SDK.
When I started with FB I think I spent the first 2 days going round and round with project settings and options until I got them all figured out.
When I develop, I usually have my browser open and I have bookmarks and favorites to let me quickly get to all the pages I use most often. Here are a few of them:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/index.html <---- The API reference. In the packages window check out 'Top Level' at the top and Language Elements near the bottom. I think I have this page open in one or more tabs almost every day.
http://www.adobe.com/devnet.html
http://www.adobe.com/devnet/actionscript/learning.html
http://help.adobe.com/en_US/as3/learn/index.html
http://helpx.adobe.com/flash.html
http://help.adobe.com/en_US/flashbuilder/using/index.html
Free videos to help you learn Flash Pro:
http://tv.adobe.com/show/learn-flash-professional-cs6-/
http://tv.adobe.com/show/learn-flash-professional-cs5/
And you've already found the forums! But if you don't find an answer here, many times you can find your question already answered on www.stackoverflow.com forums.
Ok, I think I went a little overboard again.

Zend studio 8.0 and flex 4 plugin integration problem(please help!)

hello every body, actually i have installed Zend Studio 8.0 is built on Helios( which is currently the latest one) and trying to integrate flash builder 4(flex 4) plugin, but when i point to (C:\Program Files\Zend\Zend Studio - 8.0.0) folder the flex installer warns me since there is no folder named "dropins" in Zend Studio - 8.0.0 directory . even if i ignore the warning from flex plugin installation and continue to finish and at the end when i start zend studio no flex plugin is detected.please can any one help me in this regard. i will grately appreciate a help from the adobe team and community.

this is the same problem disscused in thread (Flash Builder 4 plugin with eclipse 3.6) http://forums.adobe.com/thread/747394?tstart=0.please follow that thread if any one do not understand this thread problem.

VC Installation with IIS 6.0 and MS SQL 2005 on MSServer2003

Dear all,
Is it possible, if we plan to install VC6.0 with IIS6.0 and MS SQL 2005 on MS Server 2003?
Now I have installation guide for install VC6.0 but it 's recommend to use MS SQL 2000 [Now MS SQL 2000 is very old and my company plan to use 2005]
Another question is If I want to change or install VC7.0, pls guide me the path and the name of VC7.0 in Service Marketplace that I have to download it. When I seach in service marketplace, I found the result as below. Which file that I have to download it, if I want to install VC7.0
000001   VISUAL COMPOSER BASE 7.01
Installation Software Component (Current View)
000002   VISUAL COMPOSER BASE 7.11
Installation Software Component (Current View)
000003   VISUAL COMPOSER BI KITS 7.01
Installation Software Component (Current View)
000004   VISUAL COMPOSER BI KITS 7.11
Installation Software Component (Current View)
000005   VISUAL COMPOSER FLEX
Installation Software Component (Current View)
000006   VISUAL COMPOSER FLEX 7.01
Installation Software Component (Current View)
000007   VISUAL COMPOSER FRAMEWORK 7.01
Installation Software Component (Current View)
000008   VISUAL COMPOSER FRAMEWORK 7.11
Installation Software Component (Current View)
000009   VISUAL COMPOSER GP KITS
Installation Software Component (Current View)
000010   VISUAL COMPOSER GP KITS 7.01
Installation Software Component (Current View
Regards,
Pannee

Hi,
Am not sure this would answer your question or not, but this is for your info:
Visual Composer is now built in or provided as default component in EP7.0 SPS12 onwards.
If you have the portal installation then you can access this by http://hostname:5xx00/VC.
Regards,
Vamshi.

FLEX and CF Debugger setup - PLEASE HELP

I can't get the line debugger for CF in eclipse to work for
the life of me. I've been trying this for over 8 hours now. I
follow the directions on all the tutorials out there on the web and
still no luck. All my CF admin settings are correct. I think it has
to do w/ the debug mappings but not sure. I have a remote CF server
and am running Flex Builder 3 off of my local laptop (so wouldn't
that mean that the server and Eclipse are not on the same machine?)
My web root is a mapped network drive to the remote CF machine
(z:\websites). I can connect to the CF RDS fine... I can use the
wizards fine... I can set the breakpoints on the CFC page fine...
but the debugger just will not show me any variables. Please help
me to understand what I am doing wrong.

For anyone having difficulty setting up the debugger please
follow these steps (btw all the tutorials out there are awful and
leave out important steps so I thought I'd document this to help
others out). Being a software application developer and not a
network admin these remote paths can be rather difficult to
understand.
1. uninstall any Flash player or plugins you have
2. run and install the Flash player and debugger that comes
with Flex Builder (its located in the Flex installation folder,
mine was under C:\Program Files\Adobe\Flex Builder 3\Player\win).
You'll see 3 files, but only need to install Flash Player Active X
and Plugin
3. Ensure you'r debugger and tester are working (CF line
debugging is enabled). In Windows Preferences under Adobe -->
RDS click the 2 test buttons.
4. Install CFEclipse (to be able to get code hints and have
Eclipse color code cfm and cfc's like DreamWeaver does)
5. Make sure you have 2 breakpoints in the section you want
the debugger to stop. I was using 1 and on an empty space and that
wasn't stopping on the breakpoints. Also make sure the breakpoints
are on a coldfusion command line.
6. If you are using localhost don't add anything to the
mappings section other than
http://localhost:(your port
number, if you run CF admin you will see the port number in your
URL). If you have a CF server remotely though this is the TOUGH
part. It took me days to figure out my mappings. I'll just give you
my setup and work with that to figure out you're own.
I mapped my remote server drive to Z:\ and my WWWroot is
z:\websites so the correct Eclipse path = z:\websites.
The correct Coldfusion path is /websites (don't ask me why or
how, but anything other than this was not working)
7. Run the debugger by clicking the right arrow next to the
debug icon, select Other and select CF(launch a new config is you
dont have one already). When you set it up and press "Debug"...
press F11 to run a browsing session. Navigate to the page you set
breakpoints for and the debugger should work!
I hope this helps and saves others the agony of playing
around with mappings.

Install flex demo plugin on OSX

OS X 10.4.x, java 1.5.0_06, Eclipse 3.2
The flex installer, helpfully, informs me that my Eclipse
folder neither contains Eclipse v3.2 or the configuration/
directory.
Is there a workaround for this?

please help me out as early as possible...... :-)

Interesting Multiple Container Bug in TLF

Hi All,
I've hit a bit of a roadbump in developing an AIR app (2.5.1.17730 runtime) using the TLF and wonder if anyone else has seen it and come up with a workaround. Consider the mxmxl below. When you run the app, you two columns of text as you would expect. Editing (cut, paste, type, undo, redo) all work fine anywhere except when you edit the second line of the second column. Then the whole second column is pushed down to the y-value of the first column until you do an edit somehwere else in the window (say, put a space in the first column somewhere). I have pored over this for quite a while and have come to the considered opinion that (a) it's a bug, and (b) I haven't a clue what is causing it or how to work around it.
Any suggestions?
Thanks!
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/mx"
        creationComplete="init(event)" viewSourceURL="srcview/index.html">
<fx:Script>
<![CDATA[
   import flashx.textLayout.container.ContainerController;
   import flashx.textLayout.conversion.ITextImporter;
   import flashx.textLayout.conversion.TextConverter;
   import flashx.textLayout.edit.EditManager;
   import flashx.textLayout.elements.TextFlow;
   import flashx.undo.UndoManager;
   import mx.events.FlexEvent;
   private var _textContainer:SpriteVisualElement = null;
   private static const textInput:XML = <TextFlow xmlns="http://ns.adobe.com/textLayout/2008">
    <div>
     <p><span>Qui magna velit consequat, lobortis iriure autem augue duis exerci blandit esse laoreet ex eros, adipiscing aliquip, ut, vel eum. Vero consectetuer dolor feugait dolore lobortis delenit nibh eu, te et in, dolore. Nulla ut enim consequat diam adipiscing nulla facilisis zzril te laoreet at. Iusto quis esse nulla et, aliquam quis, facilisi euismod, diam eros ut dolore commodo erat et ad tation, illum. Autem, qui wisi odio ad vel esse ad ad. Velit vel facilisis iriure, et nisl aliquip iriure zzril.
       Praesent tincidunt blandit nulla, odio, sed vulputate ipsum dolore duis in veniam iriure zzril minim odio suscipit dignissim wisi. Feugiat, volutpat duis vero ut elit zzril, te commodo duis. Molestie ea erat et volutpat dolore vel molestie consequat tincidunt hendrerit consequat. Euismod, consequat blandit nostrud facilisi qui delenit duis, molestie tation illum accumsan amet dolor feugait molestie ea consectetuer wisi. Adipiscing lobortis, ut veniam nostrud accumsan vero elit dolore ex nulla ullamcorper sit qui. Qui magna velit consequat, lobortis iriure autem augue duis exerci blandit esse laoreet ex eros, adipiscing aliquip, ut, vel eum.
       Vero consectetuer dolor feugait dolore lobortis delenit nibh eu, te et in, dolore. Nulla ut enim consequat diam adipiscing nulla facilisis zzril te laoreet at.</span></p>
    </div>
    </TextFlow>;
   private var _textFlow:TextFlow;
   private function init(evt:Event):void {
    var importer:ITextImporter = TextConverter.getImporter(TextConverter.TEXT_LAYOUT_FORMAT);
    importer.throwOnError = true; // will throw exception if parsing error occurs on import
    _textFlow = importer.importToFlow(textInput);
    _textFlow.flowComposer.addController(new ContainerController(col1, col1.width, col1.height));
    _textFlow.flowComposer.addController(new ContainerController(col2,col2.width,col2.height));
    col2.x = g1.width*0.55;
    //adding Select/Edit/Copy/Paste/Undo features
    _textFlow.interactionManager = new EditManager(new UndoManager());
    // initialize with a selection before the first character
    _textFlow.interactionManager.selectRange(0,0);
    _textFlow.flowComposer.updateAllControllers();
]]>
</fx:Script>
<fx:Declarations>

</fx:Declarations>
<s:Group x="0" y="0" width="100%" height="100%" id="g1">
<s:SpriteVisualElement x="0" y="0" height="100%" width="45%" id="col1"/>
<s:SpriteVisualElement y="0" height="100%" width="45%" id="col2"/>
</s:Group>
</s:WindowedApplication>

This is a bug in the TLF 1.1. It was not there in TLF 1.0, and has been fixed in TLF 2.0 (currently pre-release). You have three options:
- You can go back to TLF 1.0. If you are using Flex 4.1, I think you could do this by putting TLF 1.0 in place of TLF 1.1 in the Flex installation. Alternatively, you could roll back to using Flex 4.0.
- You can go forward to use TLF 2.0. If you are using Flex, this would mean adopting the pre-release Hero version of Flex.
- You can create your own TLF 1.1 with a fix. I can provide you with the fix, but you will need to recompile TLF 1.1, which means you cannot use the RSL version of the library.
I apologize for the inconvenience.
- robin

XCode 5.1 updated and now I can't debug AIR apps on iOS Simulator anymore

Today XCode updated itself to version 5.1, with new iOS 7.1 platform support. It updated itself without asking permission, and now I can't run my AIR apps on the iOS simulator anymore. All my apps fail with the following error:
'Launching [myApplication]' has encountered a problem.
Error occurred while installing the application:
dyld: Library not loaded: @rpath/iPhoneSimulatorRemoteClient.framework/Versions/A/iPhoneSimulatorRemoteClient
Referenced from: /Applications/AIR_SDKS/AIRSDK_4.0.0.1628/lib/aot/bin/isb/isb
Reason: image not found
/var/folders/g1/014r026919j9fkv085ypt31r0000gn/T/cmd7720052456329253213.tmp: line 1: 2126 Trace/BPT trap: 5 "/Applications/AIR_SDKS/AIRSDK_4.0.0.1628/lib/aot/bin/isb/isb" "-install" "-apppath" "/var/folders/g1/014r026919j9fkv085ypt31r0000gn/T/eb03981d-5689-4bb5-821c-78ca84086393/Pa yload/[myApplication].app" "-sdkpath" "/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/ SDKs/iPhoneSimulator7.1.sdk"
I use AIR SDK 4.0.1628 (the latest version according to the SDK download page today), and it doesn't make a difference if I choose another simulator version (7.0 and 6.1 fail the same way).
I'm developing in Flash Builder 4.7, on OS X 10.9.2
Any ideas of how to fix this? Will using the AIR 13 beta help?
Thanks, Frank

Thanks for the steer Jason that worked,
So that would be Apache Flex 4.12 using Flex installer 2.7 will bring the same benefits of AIR SDK for Flex 13...... I basically have to use an installer from a third party to make the commercial product I pay for work to solve the precise problem its sold as solving.
It's like buying a *******' drill you have to put together yourself.
I'm gonna get this build finished, then sneak into Flash Builders room while it's having a sleep after a big dinner and smother it with a pillow. It's the kindest thing to do. Ha!
@DavidDragon,
Follow these steps:
http://flex.apache.org/doc-getstarted.html
However just make sure you use the latest version [4.12.0]

Solution to ERROR ITMS-9000: "Invalid Segment Alignment."

I was using Flex 4.13 SDK and AIR 14 SDK. When I build a release version of my iOS app for the iTunes App Store, I received the following error.
ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have proper segment alignment and should be rebuild with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."
To resolve this problem I had to install the Apache Flex SDK with Flex SDK 4.13 and AIR SDK 15.0.302. I installed the FlexSDK and AIR SDK with the Apache Flex installation binary.
For many of you, this should be enough to rebuild and run your application. However, after I built an ad-hoc version of my iOS app, and transferred it to my iPhone 4 (iOS 8.0.2) and iPad 2 (iOS 8.1), the app crashed immediately after launch.
If I rebuilt my App in debug mode (-debug-interpreter), it ran correctly.
However, I found a reference on an Adobe message board to a command line parameter, useLegacyAOT, which indicated that the poster had some success with this command line option after his app crashed.
I added the option, -useLegacyAOT yes to the build environment.
This option tells the compiler to disable fast packaging. However, the new linker in AIR 15.0.302 still aligns segments correctly.
Don't do this unless you have to. But this seemed to work for me, and I was able to submit my iOS App to the iTunes App Store.

I'm about send application built by Adobe Flash CS6 with AIR SDK 15 for iOS but got error too:
Error ITMS-9000: "Invalid Bundle. The bundle at 'XX.app' does not contain a bundle executable
anyone know how solve this issue??

Unable to insatll Jrun update - Linux

Hello,
I am trying to install the Jrun Update in linux and having a
hard time.
I had this same problem with the original Jrun install but I
then found out that I can use ColdFusion multiserver install in
order to install Jrun and that worked fine.
The Cold Fusion installers work fine.
here is the error:
[root@sdlinux ~]# ./jrun4-unix-en-updater.bin -i console
Preparing to install...
Extracting the installation resources from the installer
archive...
Configuring the installer for this system's environment...
Launching installer...
Warning: -Xmx50331648 not understood. Ignoring.
Warning: -Xms16777216 not understood. Ignoring.
Invocation of this Java Application has caused an
InvocationTargetException. This application will now exit. (LAX)
Stack Trace:
java.lang.NoClassDefFoundError: while resolving class: ZeroGe
at java.lang.VMClassLoader.resolveClass(java.lang.Class)
(/usr/lib/libgcj.so.5.0.0)
at java.lang.Class.initializeClass()
(/usr/lib/libgcj.so.5.0.0)
at _Jv_ResolvePoolEntry(java.lang.Class, int)
(/usr/lib/libgcj.so.5.0.0)
at ZeroGd.<clinit>() (Unknown Source)
at java.lang.Class.initializeClass()
(/usr/lib/libgcj.so.5.0.0)
at _Jv_ResolvePoolEntry(java.lang.Class, int)
(/usr/lib/libgcj.so.5.0.0)
at com.zerog.ia.installer.LifeCycleManager.a(boolean)
(Unknown Source)
at
com.zerog.ia.installer.LifeCycleManager.b(java.lang.String[])
(Unknown Source)
at
com.zerog.ia.installer.LifeCycleManager.a(java.lang.String[])
(Unknown Source)
at com.zerog.ia.installer.Main.main(java.lang.String[])
(Unknown Source)
Caused by: java.lang.ClassNotFoundException:
com.apple.mrj.MRJOSType not found in
[file:/tmp/install.dir.6465/InstallerData/,
file:/tmp/install.dir.6465/InstallerData/installer.zip,
file:/usr/share/java/libgcj-3.4.6.jar, file:./, core:/]
at java.net.URLClassLoader.findClass(java.lang.String)
(/usr/lib/libgcj.so.5.0.0)
at gnu.gcj.runtime.VMClassLoader.findClass(java.lang.String)
(/usr/lib/libgcj.so.5.0.0)
at java.lang.ClassLoader.loadClass(java.lang.String,
boolean) (/usr/lib/libgcj.so.5.0.0)
at _Jv_FindClass(_Jv_Utf8Const, java.lang.ClassLoader)
(/usr/lib/libgcj.so.5.0.0)
at java.lang.Class.forName(java.lang.String, boolean,
java.lang.ClassLoader) (/usr/lib/libgcj.so.5.0.0)
at _Jv_BytecodeVerifier.verify_instructions_0()
(/usr/lib/libgcj.so.5.0.0)
at _Jv_VerifyMethod(_Jv_InterpMethod)
(/usr/lib/libgcj.so.5.0.0)
at _Jv_PrepareClass(java.lang.Class)
(/usr/lib/libgcj.so.5.0.0)
at _Jv_WaitForState(java.lang.Class, int)
(/usr/lib/libgcj.so.5.0.0)
at java.lang.VMClassLoader.linkClass0(java.lang.Class)
(/usr/lib/libgcj.so.5.0.0)
at java.lang.VMClassLoader.resolveClass(java.lang.Class)
(/usr/lib/libgcj.so.5.0.0)
...9 more
(:6465): Gtk-WARNING **: cannot open display:
I tried just running ./jrun4-unix-en-updater.bin
I tried as a user and sudo'ing the file.
Jdk is installed, I tried versions:
j2re1.4.2_13 j2sdk1.4.2_13 jdk1.3.1_15 jdk1.3.1_19
jdk1.5.0_06
Any Ideas?
Thank you
Luc

Sorry for not getting back to you sooner, but I tried on one
of the days there was a problem with the site and never got back.
Anyway I did find one more thing that might help. There is an
argument you can pass during the install. It's LAX_VM. See item
103870 in
http://www.adobe.com/support/documentation/en/flex/1_5/releasenotes.html.
Basically you'll substitue the CF installer for the Flex
installer mentioned in the article and the vm location with your
1.4.2 location.
HTH
Ted Zimmerman

Flex Installation

Similar Messages

Maybe you are looking for