Flex language questions should go in the General Discussion Forum

This forum is intended for Flex Builder questions.
Of course you can post wherever you like, but if you want
help, go where the helpers are.
Tracy

can you define what goes where then?
General discussion sounds like thoughts, comments, hopes and
wishes.
Builder 2, (meaning Flex Builder 2?), seems to be the only
area for other Flex 2 questions.
I don't mean to be wise here, but I personally don't
understand what a "builder 2" question is if not those that deal
with flex 2, such as those posted here. I want to post my questions
where they should be so that I might find help, so maybe the forum
labelling should be re-considered or better defined.

Similar Messages

GPO - Restricts the UI languages Windows should use for the selected user - not applying correctly on RDS 2012 R2

Hi All,
we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed.
I've created a GPO with settings 'Restricts the UI languages Windows should use for the selected user' to for example 'German'.
Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German.
It seems that the GPO is not changing all settings correctly to german.
Does anybody know what could be wrong?
best regards,
Siegmund

Hi Siegmund,
>>Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German
Based on the description, the policy setting should have been applied successfully. Here, did we logged onto the server via remote desktop services? If yes, what's the keyboard layout on the computer we used to RDP to the server? Before going further,
I assume that this can be caused by Auto detect Remote Keyboard layout feature introduced since Windows Server 2008.
Regarding this point, the following artcile can be referred to for more information.
Windows 2008 R2 Language Bar keeps changing Keyboard Settings
http://www.microsoftpro.nl/2011/02/24/windows-2008-r2-language-bar-keeps-changing-keyboard-settings/
Note: For the above website is not hosted by Microsoft, the link may become invalid without notice and Microsoft doesn't guarantee the accuracy of the information.
In addition, the following thread can also be referred to for more information.
2008 R2 Session Host with MUI controlled via Group Policy
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e14955a-80f9-40aa-9741-fc8609f4ad09/2008-r2-session-host-with-mui-controlled-via-group-policy?forum=winserverGP
Best regards,
Frank Shen

Welcome to the Mars General Discussion Forum

Welcome to the Mars General Discussion forum. Please use this
forum to discuss Mars and supporting content on Adobe Labs.

for a second i thought about the planet... heheheh
"Nancy - Adobe Comm. Expert" <[email protected]>
escreveu na mensagem
news:ehnm89$949$[email protected]..
> Thanks, Andres! I missed it somehow! :)
> Nancy
>
> "Andres Cayon" <[email protected]> wrote in
message
> news:ehn94t$naf$[email protected]..
>>
http://labs.adobe.com/wiki/index.php/Mars
>> 8-)
>> --
>> Andres Cayon
>>
http://www.dwug.es
>> ---------------------------------------
>> "Nancy - Adobe Comm. Expert"
<[email protected]> escribió en el mensaje
>> news:ehmo1n$3o3$[email protected]..
>>> Okay .. I'll bite. I've been to Labs and seen
the mobile authoring link
>>> and the Flex 2 for Mac link .. what is Mars?
>>>
>>> Nancy Gill
>>> Adobe Comm. Expert for Dreamweaver
>>>
>>> "Daniel T" <[email protected]>
wrote in message
>>> news:ehmcsk$lb1$[email protected]..
>>>> Welcome to the Mars General Discussion
forum. Please use this forum to
>>>> discuss Mars and supporting content on Adobe
Labs.
>>>
>>>
>>
>>
>
>

General Discussion forum

I know these are support type forums, but I was wondering if now would be a good time to introduce a general discussion forum for non support posts, and genral"have you seen that..." posts?
Cheers
Alun
"Can a leopard change it's shorts?" - T Prattchet

I think it's a good idea to have a General Forum which could be for questions that don't fit in the categories that are showing at present.
You could also have say a Chillout Room where it is just for general chit chat, they are popular in some forums.
Joan Archer
http://crossstitcher.webs.com

Where are the portal discussion forums gone?

When I click on any of the portal discussion forums from the link
http://www.oracle.com/technology/products/ias/portal/discussion_forums.html
I get a 404 error!
eg: General Portal Discussion Forum (link http://www.oracle.com/forums/forum.jsp?forum=14)
returns page:
http://www.oracle.com/errors/404.html
This link worked until 2 days ago!

The cited URL is incorrect; this forum is actually located here:
Oracle Application Server Portal
Regards, OTN

Welcome to the NI Discussion Forums

Welcome to the NI Discussion Forums! The NI Discussion Forums are a peer-to-peer support and collaboration community made up of volunteers. These boards serve as a meeting point where you can post any questions, thoughts, or suggestions you may have regarding NI products. Thousands of people worldwide – including NI engineers – can read your post and reply with their input.
Before you jump into the forums, we recommend you first read our User Guidelines to ensure the best experience for yourself and others.
If you are new here, here are a few quick tips to help you get started:
1. Have a question? Start with a search.
It's possible there is already an answer to your question within one of the forum boards.
2. Ready to make a post? Take a look at our board listings to find the most appropriate place to start your topic.
We have categories for our most active software and hardware boards, as well as additional product boards.
3. When writing your post, be sure to provide as many relevant details as possible.
Information such as product versions, operating systems, hardware used, applicable screenshots, and code files will help your fellow forum users better answer your question. You will also want to provide information on any troubleshooting you have already attempted.
While you're here, you may want to check out these special areas of our forums:
Get a VI converted by posting to the Version Conversion board.
Have an off-topic discussion in the BreakPoint board.
Have a great idea or feedback for an NI product? Visit the Idea Exchange.
Ask a forum related question in the Feedback on Discussion Forums board.
You can find even more user generated content in the following areas off of the NI Discussion Forums:
Example Code
Tutorials
Technical Blogs
Online User Groups
Want more information to help you get started?
View the rest of our new user content here or visit the Help section.
Thank you for being a part of our community! We look forward to seeing your contributions!

Welcome to the NI Discussion Forums! The NI Discussion Forums are a peer-to-peer support and collaboration community made up of volunteers. These boards serve as a meeting point where you can post any questions, thoughts, or suggestions you may have regarding NI products. Thousands of people worldwide – including NI engineers – can read your post and reply with their input.
Before you jump into the forums, we recommend you first read our User Guidelines to ensure the best experience for yourself and others.
If you are new here, here are a few quick tips to help you get started:
1. Have a question? Start with a search.
It's possible there is already an answer to your question within one of the forum boards.
2. Ready to make a post? Take a look at our board listings to find the most appropriate place to start your topic.
We have categories for our most active software and hardware boards, as well as additional product boards.
3. When writing your post, be sure to provide as many relevant details as possible.
Information such as product versions, operating systems, hardware used, applicable screenshots, and code files will help your fellow forum users better answer your question. You will also want to provide information on any troubleshooting you have already attempted.
While you're here, you may want to check out these special areas of our forums:
Get a VI converted by posting to the Version Conversion board.
Have an off-topic discussion in the BreakPoint board.
Have a great idea or feedback for an NI product? Visit the Idea Exchange.
Ask a forum related question in the Feedback on Discussion Forums board.
You can find even more user generated content in the following areas off of the NI Discussion Forums:
Example Code
Tutorials
Technical Blogs
Online User Groups
Want more information to help you get started?
View the rest of our new user content here or visit the Help section.
Thank you for being a part of our community! We look forward to seeing your contributions!

Business Process Expert General Discussion Forum and Sap Solutions ERP- MM

Hi Experts,
Can somebody explains me difference between Business Process Expert General Discussion Forum and Sap Solutions-->ERP-MM. Also tell me where I can get QM Module forum.
Full points, if helped.
GR.
Edited by: G R on Mar 7, 2008 9:26 AM

Hi
You can visit " Product life cycle management (PLM)" for QM related issue posting.
Regards
YMREDDY

Where is the iPad Discussion Forum

Where is the iPad Discussion Forum

It's the uppermost entry on the left side of the main page, or here.
(51089)

The adobe discussion forum is useless

the adobe discussion forum is useless because there is nearly no support from adobe and it is very difficult to become an overview of only one subject. Too many threads, not at all selfexplaining...
I can not find a way to edit my last entry...
It`s frustrating and does not inspire me to join the discussions any more.
regards
Jo Jacobs

Odd. You seem to have made a post right now. Is there any way that you can be more specific? For example, any error messages that may show up when attempting to post?
Message Edited by Bskull on 11-25-2008 07:33 PM
worked with HP employee for 2 years. Freelance tech support for 11 years.

Signed in to DW General Discussion Forum Not Sticking

I have been a regular participant but lately I have to sign in every time I return.
I always check "Remember Me" but no joy
OS is XP Pro using Firefox 15.0.1
Would appreciate arriving on page already signed in as it has always been.
Appreciate any tips
Ken Binney

You need "Privacy" and "Security" Tabs of Firefox to set these for you.
In FF go to: Tools >> Options
Now you will see the two tabs in which you can set the appropriate options. You might need to clear your cache before new changes takes effect.
I suggest ask the experts in Firefox forums if this doesn't work:
<http://support.mozilla.org/en-US/questions>
<http://forums.mozillazine.org/index.php>
Hope this helps.

Why are my questions and posts disappearing from this discussion forum?

it shows the number in post count on my profile but the posts and questions i leave are gone after a few times of logging in. I don't get why this is happening.

Thanks for the reply. No post nor question is in profile or my post/my questions but the number of posts actually accounts for them being made which is strange. I doubt they were moderated for being in wrong category and nothing against the terms for sure. It's only two post one question was basically this same one I just asked,but in other words. Another I commented about the ram not being so cheap for new Imacs to upgrade. Since people on the SL installs were complaining about not being able to upgrade to SL due to lack of ram and others commented how cheap memory is. I just was wondering what the problem was. That original question is nowhere to be found. Thanks though at least i know others can see my latest post. Nothing for me to lose sleep over.

Is photoshop general discussion forum dysfunctional

Does anybody know a reason why the Photoshop General Forum may not be fully functional (since 13 hours ago it seems from the time of the last post)?
Edit: The Reply-option seems to be missing in the threads.

Clearly! But I am a decent engineer.
I can put my name on things proudly and I don't have to put effort into remembering what story I told whom and that's priceless!
Underpromise and overdeliver. Build a better mousetrap... Yada yada.
-Noel

What happened to the search option in the Apple discussion forum?

It's the simple things that we take for granted. Like the search option. Any info on this?

Go to google search and in the advanced options you can limited your search to just this forum.
http://www.google.com/advanced_search?q=search&hl=en&client=safari&rls=en-us

Featured Lecture of the Week - Discussion Forum

Please use this forum to discuss Web Dynpro for ABAP Overview the SAP TechEd Featured Lecture of the Week starting on Thursday April 15.

nice to be featured i guess... all thanks goto Arch developers ofcourse, for making such a great distro. I only made it live...
and ofcourse, thanks goto the great Archie team - developers and testers - for contributing so much to the project
lately i got some projects (finally... a man gotta live...) so im busy with other stuff atm. I do try todo my best to work on Archie too, but for now im building a customized Archie for my congregation (hebrew supported, nice customization, featuring the bibletime software), and i try to squeeze some Archie work between here and there. Hopefully with dibble's and the rest of the team we'll be able to release 0.6 (xfce/kde/e17) shortly.

Searching the Flex General Discussion returns cf error

Hi everyone,
I'm hoping someone from Adobe can help me out here because if
I enter a search into the Search field in the general discussion, I
get a cold fusion error . If necessary I can send a screenshot of
what I get, but I can't seem to search the 'Flex General
Discussion' for anything without getting an error telling me to
contact the website administrator, of which I have no idea who that
is, or how to find them on the site.
I'm a designer/devloper who works alone and I really depend
on these resources to help me along when I need help, but not being
able to search the forum is becoming a real problem.
If this type of post should be done somewhere else, I
apologize, but I have no idea how to contact the site administrator
for the Flex Developer Center.
Thanks in advance

"jkpritchard" <[email protected]> wrote in
message
news:glsa8c$15g$[email protected]..
> Hi everyone,
>
> I'm hoping someone from Adobe can help me out here
because if I enter a
> search
> into the Search field in the general discussion, I get a
cold fusion error
> . If
> necessary I can send a screenshot of what I get, but I
can't seem to
> search the
> 'Flex General Discussion' for anything without getting
an error telling me
> to
> contact the website administrator, of which I have no
idea who that is, or
> how
> to find them on the site.
>
> I'm a designer/devloper who works alone and I really
depend on these
> resources
> to help me along when I need help, but not being able to
search the forum
> is
> becoming a real problem.
>
> If this type of post should be done somewhere else, I
apologize, but I
> have no
> idea how to contact the site administrator for the Flex
Developer Center.
I always use the Advanced Search, which sort of works.

Flex language questions should go in the General Discussion Forum

Similar Messages

Maybe you are looking for