Flex mobile send SMS with attachements;

Hi there, I'd like to know if it's posible to call the default Android SMS Manager with already an attached file?
I use this:
navigateToURL(new URLRequest("sms:"));
Is it possible to pass any other parametters inside the URLRequest in order to call the SMS Manager with the desired file already attached? I know it is possible in the Android SDK + Java. Does AIR for android and Actionscript have this feature?
Thank you!

You'll probably need to use AIR native extensions to access this ability (http://www.adobe.com/devnet/air/native-extensions-for-air.html)

Similar Messages

Error while trying send emai with attachment

Hello,
I am facing an error while trying to send email with attachment (spreadsheet).
Error is: "Error in calling 'SBCOMS_SEND_REQUEST_CREATE' in 'SO_DOCUMENT_SEND_API1' with Sy-subcr = 1".
Do I need to configure the sender email address or some configuration at the sender system?
I followed the example given in the below link.
http://wiki.sdn.sap.com/wiki/display/ABAP/HowtowriteanABAPProgramtoplaceanExcelfileinapathandsenditasan+Attachment
Could you please help on this?
Thanks & regards,
Ravish

Hi Ravish,
sure you can create local excel using [Desktop Office Integration (BC-CI)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf], load as binary and attach.
More elegant, future-oriented and advanced is the [excel-from-scratch-approach abap2xlsx by Ivan Femia|http://wiki.sdn.sap.com/wiki/display/ABAP/abap2xlsx]
Regards,
Clemens

Sending Mail with attachment and preserving the order of attachment

Hi Everyone!!!!!!
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;
I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.
Sorry for stuff essay and thanks in advance!!!!!!!!!!!

>
Please update your forum profile with a real handle instead of "974850".
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.Always post code using <tt>\...\</tt> tags as described in the FAQ.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.I see no code that attaches anything to email messages. What code is used to do this? Why are the files being written to the file system?

Sending Mail with attachment from WD

Hi all,
I wan't to send an email from webdynpro with an attached pdf-document. I had a look at Tutorial 31, but i will only use the first part, sending email with attached interactive form. So I decided to build a new project. I did everything as in the tutorial described, but when entering the following code into the wdDoInit method from the SendView an error occurs.
//@@begin wdDoInit()
 // @TODO Enter your email address for the setFrom and setTo methods by replacing the text in angle brackets.
 wdContext.currentEmailElement().setFrom("[email protected]");
 wdContext.currentEmailElement().setTo("[email protected]");
 wdContext.currentEmailElement().setCc("");
 wdContext.currentEmailElement().setBcc("");
 wdContext.currentEmailElement().setSubject("Travel Request Form");
 wdContext.currentEmailElement().setBody("BlaBlaBla");
 //@@end
In the coding is no error. In the Context node of the SendView I created a new value node with the value attributes. When writing the code and using strg+space i can complete automatically, so no writing errors.
When deploying and running the application I get always a NullPointerException, if make no difference if i delete one entry or which line of code i insert, the same error.
java.lang.NullPointerException
 at com.ao.test.emailtest.SendView.wdDoInit(SendView.java:99)
 at com.ao.test.emailtest.wdp.InternalSendView.wdDoInit(InternalSendView.java:127)
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
 at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
I've compared my project with the one from tutorial but i found no differences.
Have anybody have an idea what to do?
Thanks
Mathias

Hi,
NullpOinter excepttion could be bcose of "currentEmailElement()".
Please create an element of EmailNode before these statements.
IPrivate<ViewName>.IEmailElement ele=wdContext.createEmailElement();
wdContext.NodeEmail().addElement(ele);
You can use the following for sending attachments :
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(Attachment);
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(Attachment);
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(Attachment);
multipart.addBodyPart(messageBodyPart);
msg.setContent(multipart);
Regards, Anilkumar
Message was edited by: Anilkumar Vippagunta

Sending mail with attachment fails on MAC Mail and WRP400.

Sending mail with attachment fails on MAC Mail and WRP400.
We have hundreds of WRP400 connected with Mac (Machintosh) computers. No special configurations are applied (no virtual server or DMZ). Web navigation, P2P programs and sending mail without attachment work right.
The problem is the impossibility to send mails with medium or big size files attachment from MAC Mail.
If we use Windows PCs or a different linksys routers (eg. WRT54G) the problem not happens.
We have upgraded WRP400 firmware version from 1.00.06 to 2.00.05 but the result is the same. Sending mail with attachment using Mac fails.
We tried to configure WRP400 with DMZ to a particular MAC. We tried to configure Virtual server on tcp 25 port of a MAC. The result is always the same.
This is a WRP400 bug? Windows PCs work right. MAC and MAC mail works right with other linksys router.
We need help. Thanks.

The problem was fixed since beta firmware 2.00.11.
I think that this issue was caused from a bug that decrease upload bitrate of WRP400 after some days of activity.
See more details on Cisco forum under title "WRP400 stops responding after browsing certain websites".
Thanks.

Mail_Receiver: Send Mail with attachment

Hi everybody,
I need some help. I want to send a mail with attachment.
for this I have imported SAPs xsd for the mail adapter.
I wonder how to map the target fields?
The following causes five! attachments in SXMB_MONI and the adapter throws
java.lang.IllegalArgumentException: can't parse argument number
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
 <Subject>SubjctName</Subject>
 <From>mailadress</From>
 <To>mailadress</To>
 <Content_Type>text/plain; charset="ISO-8859-1"</Content_Type>
 <Content_Description>
 <attachment filename="filename.txt">This should be the content of the attachment</attachment>
 </Content_Description>
 <Content>Constant</Content>
 </ns1:Mail>
 </ns0:Message1>
</ns0:Messages>
How do I have to foll the target fields?
Thanks regards
Mario

Hi
the following links may help you :
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
Also reffer to the below mentioned thread;
Regarding mail sent with an excel attachment
Regard's
Chetan Ahuja

XI Mail Adapter: sending emails with attachment with help of java mapping

Hi ,
On trying out the scenerio mentioned in the blog, using the java mapping provided
"XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
The scenerio works just fine.
But the payload as the content of the attachment is not getting generated in proper XML format.
I suppose it's because of the replace special characters code part..
Can anyone help me state the modification required in the code.
Thanks!
Regards,
Faria Mithani

It might be a codepage issue. Is your original payload UTF-8?

Convert Script output data to Text(.txt) file & send mail with attachment.

Hi All,
Requirement: I shulb be able to conver th Script output data to Text(.text) file & send a maill with attachment with this text file. Formant of text file should be like output of Print priview.
Plese sugget with Function modules to cover as Text file.
I am able to converting the Script output data to PDF and sending mail with attachment. So I don't want PDF file now.
Thanks in advance.

Hi, Thanks for responst.
We can convert the Scirpt output to PDF file by using OTF function module and the PDF file looks like Print Privew output.
Same like this I want Script out in NOTEPAD (.txt). Is that possible, Plz sugget with relavent Function Modules.
Thanks.

Sharepoint Online - Send email with attachment

Hi All,
is there some way how to send email with attachment, which is attached to list item in host web?
I tried some of solutions but none of them not working.
Server side:
For example event receiver after added list item with attachment - Because it is office 365, in SandBox solution I can´t use SmtpClient class.
Any other ideas?
Client side:
For example client web part with REST call. It works fine until I don´t need access to attachment.
string oDataUrlAttach = "/_api/Web/lists/getbytitle('ListName')/Items(6)/AttachmentFiles('Document.docx')/$value";
            HttpWebRequest itemRequestAttach = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrlAttach);
            itemRequest.Method = "GET";
            itemRequest.Accept = "application/atom+xml";
            itemRequest.ContentType = "application/atom+xml;type=entry";
            itemRequest.Headers.Add("Authorization", "Bearer " + accessToken);
            HttpWebResponse itemResponseAttach = (HttpWebResponse)itemRequestAttach.GetResponse();
Here I get error: The remote server returned an error: (403) Forbidden.
But other calls are OK. I can get all items from my list except attachments.
Any ideas?
Thank you.

Why hasn't this been answered?
Sam Ogle

Convert Screen(spool) to PDF file sending mail with attach file

Hi :
I'd like convert spool list to pdf and sending file...
so, I read thread about spool convert to PDF before,
and know how to convert Spool to PDF file and send mail with attach file.
but I have a problem.
my solution as:
step 1. Call function: "CONVERT_ABAPSPOOLJOB_2_PDF"
step 2. Call function: "SO_NEW_DOCUMENT_ATT_SEND_API1"
then, I got a mail with attached PDF file, but the PDF file display limited 255 line.( SO_NEW_DOCUMENT_ATT_SEND_API1 limited)
I want to showing word is wider that 255.
and then I find a manual method as:
After program finished.
Function Menu -> system -> List -> Send
use Prog: "Create Document and Send"
I use this prog sending mail and attached file ,
PDF file do NOT have 255 word limit !
finally. my question is, If I want sending mail as Prog: "Create Document and Send", how to do?
which Function I have to use?...
Please help me, Thanks!

Hi,
Check this sample code of sending spool as attachment to an email address..
Parameters.
PARAMETERS: p_email(50) LOWER CASE.
PARAMETERS: p_spool LIKE tsp01-rqident.
Data declarations.
DATA: plist LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: document_data LIKE sodocchgi1.
DATA: so_ali LIKE soli OCCURS 100 WITH HEADER LINE.
DATA: real_type LIKE soodk-objtp.
DATA: sp_lang LIKE tst01-dlang.
DATA: line_size TYPE i VALUE 255.
DATA: v_name LIKE soextreci1-receiver.
DATA rec_tab LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
Get the spool data.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
 EXPORTING
 rqident = p_spool
 first_line = 1
 last_line = 0
 desired_type = ' '
 IMPORTING
 real_type = real_type
 sp_lang = sp_lang
 TABLES
 buffer = so_ali
 EXCEPTIONS
 no_such_job = 1
 job_contains_no_data = 2
 selection_empty = 3
 no_permission = 4
 can_not_access = 5
 read_error = 6
 type_no_match = 7
 OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Error'.
LEAVE LIST-PROCESSING.
ENDIF.
Prepare the data.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 0.
plist-body_num = 0.
plist-doc_type = 'RAW'.
plist-obj_descr = 'Test ALV'.
APPEND plist.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 1.
DESCRIBE TABLE so_ali LINES plist-body_num.
plist-doc_type = real_type.
Get the size.
READ TABLE so_ali INDEX plist-body_num.
plist-doc_size = ( plist-body_num - 1 ) * line_size
 + STRLEN( so_ali ).
APPEND plist.
Move the receiver address.
MOVE: p_email TO rec_tab-receiver,
 'U' TO rec_tab-rec_type.
APPEND rec_tab.
IF NOT sp_lang IS INITIAL.
document_data-obj_langu = sp_lang.
ELSE.
document_data-obj_langu = sy-langu.
ENDIF.
v_name = sy-uname.
Send the email.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = document_data
 sender_address = v_name
 sender_address_type = 'B'
 TABLES
 packing_list = plist
 contents_bin = so_ali
 receivers = rec_tab
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE e208(00) WITH 'Error'.
ENDIF.
COMMIT WORK.
Send the email immediately.
SUBMIT rsconn01
WITH mode = 'INT'
AND RETURN.
Thanks,
Naren

How i can send email with attachment ?

any body can help me ..............??????????????????

Hello,
please, use "Search" utility in the forum before ask something like this...
I've just tried with :
"send email with attachment"
and ... you have the solution in the first result...
Regards,
Jose.

Send mail with attachement

i want to send mail with attachements. does wwv_flow_mail.send support this feature? how to do it?
thanks,

Please check this thread..
Re: sending mails with attachment
Hope this helps.
Thanks

Problem in sending mail with attachment

Hi All,
I am using the function module 'SO_NEW_DOCUMENT_ATT_SEND_API1' to send mail with attachment.
the program executes properly and shows a message 'Document Sent'. But neither the sent mail appears in 'SOST' nor I get it on the specified email id.
Below is my code:
*** As attachment I am sending resume whose contents are stored in table 'ZResume' corresponding to personnel no.(pernr) and serial No.(srno).
START OF PROGRAM----
REPORT ZPTEST_SEND_MAIL_ATTATCHMENT.
DATA : w_name TYPE sos04-l_adr_name.
DATA: RESUME TYPE table of XSTRING with header line.
START-OF-SELECTION.
* Data Declaration
DATA:
 l_datum(10),
 ls_docdata TYPE sodocchgi1,
 lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
 lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
 lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
 lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE,
 lt_reclist TYPE TABLE OF somlreci1 WITH HEADER LINE,
 lt_listobject TYPE TABLE OF abaplist WITH HEADER LINE,
 l_tab_lines TYPE i,
 l_att_type LIKE soodk-objtp.
WRITE sy-datum TO l_datum.
SELECT SINGLE RESUME FROM ZRESUME INTO RESUME
 WHERE PERNR EQ '00001182'
 AND SRNO EQ '1'.
APPEND RESUME.
* Because RESUME may be of size RAW(1000)
and objbin is of size CHAR(255) we make this table copy
CALL FUNCTION 'TABLE_COMPRESS'
 TABLES
 in = resume
 out = lt_objbin
 EXCEPTIONS
 compress_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
Error in function module &1
 MESSAGE ID '61' TYPE 'E' NUMBER '731'
 WITH 'TABLE_COMPRESS'.
ENDIF.
* Create the message and send the document.
Create Message Body
* Title and Description
ls_docdata-obj_name = 'Resume'.
ls_docdata-obj_descr = 'Resume'.
* Main Text
lt_objtxt = 'Resume of the candidate' .
APPEND lt_objtxt.
* Write Packing List (Main)
DESCRIBE TABLE lt_objtxt LINES l_tab_lines.
READ TABLE lt_objtxt INDEX l_tab_lines.
ls_docdata-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
* Create Message Attachment
Write Packing List (Attachment)
l_att_type = 'ALI'.
DESCRIBE TABLE lt_objbin LINES l_tab_lines.
READ TABLE lt_objbin INDEX l_tab_lines.
lt_objpack-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objbin ).
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = l_att_type.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = 'Resume'.
APPEND lt_objpack.
* Create receiver list
 lt_reclist-receiver = '[email protected]'.
 lt_reclist-rec_type = 'U'.
 APPEND lt_reclist.
* Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = ls_docdata
 put_in_outbox = ''
 TABLES
 packing_list = lt_objpack
 object_header = lt_objhead
 contents_bin = lt_objbin
 contents_txt = lt_objtxt
 receivers = lt_reclist
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
IF sy-subrc = 0.
Document sent
 MESSAGE ID 'SO' TYPE 'S' NUMBER '022'.
ELSE.
Document <&> could not be sent
 MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
 WITH ls_docdata-obj_name.
ENDIF.
END OF PROGRAM----
Can anybody tell me where I am making mistake?
Thanks in advance,
Pragya

Hi Pragya,
Refer the code below. It's working fine and try to match up the things from your program.
REPORT ZSAMPL_001 .
INCLUDE ZINCLUDE_01.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
*file_open_error = 1
*file_read_error = 2
*no_batch = 3
*gui_refuse_filetransfer = 4
*invalid_type = 5
*no_authority = 6
*unknown_error = 7
*bad_data_format = 8
*header_not_allowed = 9
*separator_not_allowed = 10
*header_too_long = 11
*unknown_dp_error = 12
*access_denied = 13
*dp_out_of_memory = 14
*disk_full = 15
*dp_timeout = 16
*OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
***INCLUDE ZINCLUDE_01 .
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
tables crmrfcpar.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
data v_rfcdest LIKE crmrfcpar-rfcdest.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
FORM
FORM ml_saveforbp USING jobname jobcount.
Data
*data : yhead like yhrt_bp_head.
*DATA : ydocdata LIKE yhrt_bp_docdata,
*yobjtxt LIKE yhrt_bp_objtxt OCCURS 0 WITH HEADER LINE,
*yreclist LIKE yhrt_bp_reclist OCCURS 0 WITH HEADER LINE.
*DATA : seqnr TYPE i.
Head
*yhead-jobname = jobname.
*yhead-jobcount = jobcount..
*MODIFY yhrt_bp_head FROM yhead.
Doc Data
*ydocdata-jobname = jobname.
*ydocdata-jobcount = jobcount.
*MOVE-CORRESPONDING docdata TO ydocdata.
*MODIFY yhrt_bp_docdata FROM ydocdata.
Objtxt
*seqnr = 0.
*LOOP AT objtxt.
*seqnr = seqnr + 1.
*yobjtxt-jobname = jobname.
*yobjtxt-jobcount = jobcount.
*yobjtxt-seqnr = seqnr.
*MOVE-CORRESPONDING objtxt TO yobjtxt.
*MODIFY yhrt_bp_objtxt FROM yobjtxt.
*ENDLOOP.
RecList
*seqnr = 0.
*LOOP AT reclist.
*seqnr = seqnr + 1.
*yreclist-jobname = jobname.
*yreclist-jobcount = jobcount.
*yreclist-seqnr = seqnr.
*MOVE-CORRESPONDING reclist TO yreclist.
*MODIFY yhrt_bp_reclist FROM yreclist.
*ENDLOOP.
ENDFORM. "ml_saveforbp
FORM
FORM ml_fetchfrombp USING jobname jobcount.
*CLEAR docdata.
*REFRESH objtxt.
*REFRESH reclist.
*SELECT SINGLE * FROM yhrt_bp_docdata
*INTO corresponding fields of docdata
*WHERE jobname = jobname
*AND jobcount = jobcount.
*SELECT * FROM yhrt_bp_objtxt
*INTO corresponding fields of TABLE objtxt
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
*SELECT * FROM yhrt_bp_reclist
*INTO corresponding fields of TABLE reclist
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
ENDFORM. "ml_fetchfrombp
Please reward points if it helps.
Regards,
Amit Mishra

Sending email with attachment from iCloud

when i am sending email with attachment, when i am sending email with attachment I found that the mail was send and still on draft on the client software on my mac book pro. Any solution please??

That happens at times. Don't know why. Just delete the email in the drafts folder, as long as you are sure it was sent (check the sent folder). I've wondered whether it's a timing issue.

BPEL send email with attachment

Hi guys,,
Now i want to send email with attachment from the bpel console. In bpel console, if i want to use, "browse" button, how can i create this button in my xsd file?

Hello,
Well I'm using the BPEL build in decoder. It works for txt file but how about PDF? Will it be the same?
it give me this message in the email process.
XML Parsing Error: reference to invalid character number
p/s: it working to txt but not pdf.
below is the script
<bpelx:exec name="decoder" language="java" version="1.5">
<![CDATA[String inputString = new String();
 inputString =(String)getVariableData("attachmentContentVar");
 try {
 String decoded = Base64Decoder.decode(inputString);
 setVariableData("decoded",decoded);
catch(Exception e)
e.printStackTrace();
}]]>
</bpelx:exec>
<copy>
<from variable="retriveAttachment_retriveAttachmentSelect_TASKID_OutputVariable"
part="WfattachmentCollection"
query="/ns3:WfattachmentCollection/ns3:Wfattachment/ns3:encoding"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:MimeType"/>
</copy>
<copy>
<from variable="retriveAttachment_retriveAttachmentSelect_TASKID_OutputVariable"
part="WfattachmentCollection"
query="/ns3:WfattachmentCollection/ns3:Wfattachment/ns3:name"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:BodyPartName"/>
</copy>
<copy>
<from expression="bpws:getVariableData('decoded')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:ContentBody"/>
</copy>
</assign>
Edited by: kpchong on Oct 20, 2009 12:00 AM

Flex mobile send SMS with attachements;

Similar Messages

Maybe you are looking for