Flex Module for Apache and IIS for Flex3 Release
All materials said that Flex Module for Apache and IIS was
included in Flex3 Release of Feb. 25,but I did not find it.
Does Anyone know about where to download the kit.
Thanks
Aiguo
This link seems to have it, for Win and Mac:
http://labs.adobe.com/wiki/index.php/Flex_Module_for_Apache_and_IIS#Installation
Similar Messages
-
Running apache and IIS on SBS: 403 permissions issue
I'm trying to run Apache and IIS at the same time on the
Windows SBS. I can bring up the Apache screen from a terminal, but
I get the dreaded: 403 access denied. I've hunted around for a
solution, but without much luck. Thanks in advance for any
suggestions.
Mikeupdate: last night i was up so late trying to tweak the
config file that i probably messed something up. i uninstalled the
apache and re-installed and set the port to listen on 8080. seems
to be working now!
one thing i found strange: on the server i typed in the ip
address of the server:8080 and it woudn't access the apache . . .
but, it would as a localhost.
anyway its working now . . . proof that just posting
something on this board gets results ;) -
I am trying to install Apache on my win XP machine, so that I
can use Msql and PHP on a unix server.
It will not install from a Sam's Teach yourself CD, even on
port 8080 with a manual start. This may be because I have IIS up
and running.
Has anyone any idea if it is possible to have both servers
installed, but only one running?
If it is, and I switch to Apache, will the localhost on IIS
be damaged in any way? Could I then switch Apache off and IIS back
on again?Hi,
yes of course, you can turn off the IIS in control panel /
administration / IIS, choise the web server and push the stop
button, if you want to start you can push de start button,
in apache there may be a tray ikon where you can easily stop
and start the server,
Titii
http://textures.z7server.com/ -
Apache and IIS for commercial use
Can I use this module in my webapplication ? Is it allow to
use in commercial environment?I'm not the authority here but I do NOT think you can use it
commercially for the following reasons...
The End user Agreement clause
- 2. says " ..License is granted to a personal, limited,
nonexclusi\ve, roytalty free license for purpose of EVALUATING the
software..."
- 2.1.1 says "This package does NOT contain the open source
version of the FLex SDK"
Section 1.5 defines "Internal Network" as one that excludes
the internet - but there is no mention in the licensing document
that prohibits use the software on the internet for personal
evaluation purposes. I may have to read it wrong but that is what I
inferred...
Anyway, a lawyer and a couple of hundred dollars may give you
the right answer!
Cheers! -
Apache and IIS on save dev machine (Win XP Pro)?
Hi there.
Can I just install the Apache webserver alongside IIS as I am
developing a
small web applicaion using PHP & mySQL. I usually script
in ASP and have so
IIS installed on my WinXP Pro machine.
Thanks a lot
James BrownThanks David.
Yes, I think I will just configure IIS to use PHP. I'll look
at getting your
book too, PHP 4 DW8.
Thanks for taking the time to reply.
James.
"David Powers" <[email protected]> wrote in message
news:e8pb3n$4d3$[email protected]..
> James Brown wrote:
>> Can I just install the Apache webserver alongside
IIS as I am developing
>> a small web applicaion using PHP & mySQL. I
usually script in ASP and
>> have so IIS installed on my WinXP Pro machine.
>
> You can't "just" install it, but you *can* have IIS and
Apache running on
> the same machine. To do so, you must configure either
IIS or Apache to
> listen for requests on a different port. The most common
choice is Port
> 8080.
>
> It's also possible to run PHP on IIS. The choice is
yours.
>
> If your main interest is in using ASP, it may be better
to configure IIS
> to run PHP as an ISAPI module.
>
> --
> David Powers
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
> Author, "Foundation PHP 5 for Flash" (friends of ED)
>
http://foundationphp.com/ -
hello everybody,
i'm using mac os X 10.4.11, MAMP 1.7 with Apache/2.0.59. When
i want to start the server i've got this error message :
[Wed Jan 16 17:49:45 2008] [notice] caught SIGTERM, shutting
down
what does it mean ? Anybody know a solution ?This link seems to have it, for Win and Mac:
http://labs.adobe.com/wiki/index.php/Flex_Module_for_Apache_and_IIS#Installation -
Is Flex SDK 4.6 and FB 4.6 releasing tomorrow?
I had read somewhere that Flex 4.6 and FB 4.6 would be released on Nov 29th but haven't heard/read anything about the same anywhere later. Is that date right or is there time left still?
Actually, there's a couple of gotchas, if you're not careful. First, you'll need to uninstall 4.5.1 (or whatever 4.5 you're using - if you're on an earlier version the upgrade isn't free). To be safe, I deactivated by license from the help menu (not permanently, just suspend) and then unintalled 4.5.1. I then installed what is now the current version of Flash Builder, which is 4.6.
It will look like it's installing in trial mode but once you close the program and come back in, it should pick up your SN from the previous version.
Now for Pauland's edification or entertainment, this is the right way to do that ;-) : http://bit.ly/vGc0xa -
Function Modules for Order Settlement
Hi,
I need simulate the transaction KO88 for Order Settlement with a function module but without batch input. Please, somebody can tell me which function module I can use and give me a example?
Also, I need another function module for order release...
Thanks in advance,
Regards,
IrinaHere`s the way to find out how its using ...
GO to TR.SE93-> give "KO88" 0> click display
Double click program name and find "call fucntion" when list come up "serach "Settlement" . You`ll get idea.
Hope thisll give you idea!!
<b>Pl... award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise" -
Hi everyone,
Today we've just released an update to the Flex Module for
Apache and IIS on labs. This update fixes the bugs you guys found
on the forum and adds further support for Windows Vista and Apache
1.3.7 on Windows. You can see the release notes on the
wiki
page.
One of the most visible enhancements though will be the
increased compilation speed - it now matches the incremental
compilation speed of FCSH (another tool available on labs) - by
caching the most recent 5 different Flex applications.
Regards,
CristianSo it works with FB 2? Awesome! Will check it out after 10:00
meeting.
Great work!
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Ivascu Cristian" <[email protected]> wrote
in message
news:f1c5aa$pqk$[email protected]..
> Hi everyone,
> Today we've just released an update to the Flex Module
for Apache and IIS
> on
> labs. This update fixes the bugs you guys found on the
forum and adds
> further
> support for Windows Vista and Apache 1.3.7 on Windows.
You can see the
> release
> notes on the
>
http://labs.adobe.com/wiki/index.php/Flex_Module_for_Apache_and_IIS#Release_note
> s page.
> One of the most visible enhancements though will be the
increased
> compilation
> speed - it now matches the incremental compilation speed
of FCSH (another
> tool
> available on labs) - by caching the most recent 5
different Flex
> applications.
>
> Regards,
> Cristian
> -
Looking for a Flex module to do Login, Registration, and License management
I'm looking for an open-source or commercial Adobe Flex module to do user Login, Registration, and License management. The back-end can be either on my site (PHP and MySQL) or secure 3'rd party site.
User Interface would have the following:
Register (new user)
Log-in (registered user)
Purchase a new license (logged-in user)
Apply the license to enable Flex app features (logged-in user)
Any suggestions are appreciated,
OutputLogicI've seen Flex login components out there, but I'm pretty sure you'd end up customizing the heck out of them to work with your app and back-end server. It may be faster to look at some examples and roll your own to suit.
"purchasing a license" ... Take a look at PayPal's site for instructions on how to use their payment gateway in your app. It is pretty straightforward.
"enable Flex app features"... I would store the license information on the server, along with the user's account information. Then when they load the Flex app, a simple license check (during login) could enable certain protected views within the app. -
Revision: 18107
Revision: 18107
Author: [email protected]
Date: 2010-10-08 14:01:31 -0700 (Fri, 08 Oct 2010)
Log Message:
cairngorm3-3.0.16 release for flex3 and flex4
3.0.16 in flex 4 is
Reactor Summary:Thanks for this update.
Do you plan to put on this repository only parsley/swiz/... dependencies that Cairngorm libs support or the latest dependencies versions? I was wondering that because I saw you didn't add Parsley 2.3.2 -
Where can i download the weblogic modules for apache (source/precompiled)
I have wandered the wonderfull world of the BEA website for 2 full days now and still am not an inch closer to de download site for the weblogic module for apache. That is, i have apache and need to add the weblogic module to it.
Complications are Solaris 10 and apache 2.0.55. So the latest versions of OS and webserver. Is there a precompiled module available or can i get the sources somewhere?
I do have a working module for apache 2.0.53 if someone can confirm that this is supported for 55 that would be fine by me.At times when the sources were available I tried to build it on a "new" platform (Solaris x86 32bit) and I can tell you: it's NOTHING that is obvious. Building OpenOffice or Mozilla may appear like an easy task. It took me months to get there and to be able to just build the 'build tools'.
On top, many of the sources are (historically) written in a Pascal dialect and are transferred to C with an own precompiler so there are three languages used (C, C++ and Pascal) - so it's a pretty hard (next to impossible) job to learn some algorithms from those sources.
See also here:
http://cjcollier.livejournal.com/177628.html
http://home.snafu.de/~dittmar/sapdbdev/
and just to get an idea of the modules and their structure:
http://home.snafu.de/~dittmar/sapdbdev/sapdbModules.txt
Markus -
I investigated Oracle and PHP combo for robust database services to be able to create forms, store employee applications, resumes, do financial requests, invoices, ecommerce stuff, document and lists collaboration like Microsoft Sharepoint using Internet Information Services (IIS) and SQL Server, etc. What are recommended products that I can easily develop in to code and do the requested stuff using Mac current (Apache and ????) technologies?
Of course it depends on your needs, but the OS X server already comes with Apache, Ruby On Rails, Python, Perl and SQL.
-
Function module for calculating planned and actual cost of production order
Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
SriniHi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran -
Function Modules for Data and Time
Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in <b>dd/mm/yyyy or dd.mm.yyyy</b> and time in<b> HH:MM:SS</b> formats.
Thanks in advanceHi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
<b>If its usefull reward points
</b>
Maybe you are looking for
-
Mini DVI to external monitor (VGA) problem/firmware update does nothing
Hi, Four months ago I bought a new white 13-inch Macbook (2006 model I believe) along with a handy mini-DVI - VGA adapter. I used a Hanns-G HU196D external monitor which worked fine for a couple of months but then stopped, and had the same problem wi
-
PSE-10 import directories in invalid format
Unfortuantely, I recently imported a large number of files from my wifes device using organizer, but unfortunately I set the directory structure to an incorrect format to that what was used before. Previously the format was /Adobe/My Photos/yyyy mm d
-
2 MP4 Videos one plays one does not
I have two MP4 Videos one playes and one does not. Both are h.264 Baseline profile, Level 3, AAC 2 channel audio Every transcode of the movie that will not play fails also. Any help on h.264 setting that Media Manager will take.
-
Automatic insertion of comments in ABAP code
Hello Experts, Is there any tool or report, that will automatically add comments to existing custom codes. TABLES: KNA1. will be changed to : TABLES: KNA1. "Customer Master Regards, Anubhab
-
Hi All, I ahve configured a release startegy for PR with 3 characteristics for Plant,Purchasing Org and Purchasing Grp.These i have assigned to a class and created a release code. But now when I create a PR with these 3 characteristics with values as