Flex/Net Connection and the Proper way to do things

Hello, I just have a question regarding flex and FMS.
My application uses Chat, Video, and Image Sharing. (Over a Flash Media Streaming Server)
However, currently each of those little attributes uses a seperate "Net Connection": nc1, nc2, nc3.
Is this the best practice or should I consolidate it all into just "One" net connection? Maybe using a class to accomplish this. Or is it a good idea to keep them seperate?
Let me know you thoughts.

EMelville,
I know it has been a number of months... but did you ever get a reasonable answer?
I'm working thru a similar problem, and am trying to find out the best solution.
I'm no longer using the latst FLVPlayback Component, because i needed the flexibility of the NetStream.
Now I'm trying to conserve connections, by having a single NetConnection handle
Playing a live/recorded stream,
publishing a recorded stream,
and accessing a chat room.
thanks drew

Similar Messages

How to and the proper way of Scheduling

Hi Everyone,
I looking forward to put on scheduling for some files that I have uploaded and I wanted to confirm before doing if it is alright what I am planning to do.
I am basing my scheduling on: http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/Creat_Schedul_Scen/Creating_Scheduling_Scenario.htm
From one side I have an Excel and an Oracle table, and on the other side I do have an Oracle table, to another Oracle table. Two different scenarios.
I have already created two interfaces and executed, they are working :-)
The first one Excel to Oracle
The second one Oracle to Oracle
This is what i am doing to create the scheduling.
1. Go to the Topology Navigator > Physical Architecture > Agents > Local Agent
2. Expand the procedure and find the one that I want? and if do not have, i will create. As i did.
What is and how to create a procedure? A procedure is a way to define a sequence of codes executed in order. A procedure is designed to be reused.
As I do not have any, I assume that I should create it first, no? I do create it by right clicking procedures and then selecting inserting procedure, no?
I just want to confirm that, that is the correct way of doing it; I have gotten this info by looking at different OBEs posts.
On the name field just name it as I wanna.
On the source technology, depending on the source could be either Oracle, Excel, etc.
In my case I do need one for excel and one for Oracle, so that means that I should create as many procedures as I need? For example I am going to have four excel templates, so that means four procedures? Or could create instead four scheduling? And when I will be dealing with the Oracle tables, should I create as many procedures or a different procedure from the Excel’s one, as the source is going to be different and many schedules?
Should have a look on any other tab? In fact I have, but all the fields are kinda disabled for me? Could it be for some permission issues?
3. On the procedure that I have created so far, I have right clicked on it and select Generate scenario as the tell me on the OBE. And left by default the name and the version fields.
4. My agent is running as I am executing some Interfaces now.
5. When I expand my new scenario and get to the scheduling, I right click on it and I do not get new scheduling option. Could it be because of some right issue?
I do really appreciate your help, with this!!! I am trying to get a book about ODI as the course is very expensive, but the book isn’t released yet till the end of the month!!
Please do not hesitate to contact me if any further info is required.
Best regards.
Jaison
Edited by: Jaison on 13-ene-2012 5:27

Hi Alastair,
First of all, thank you so much for answering and helping me!!!
Determine if you want the interfaces to run as a workflow (Excel first, then the Oracle tables) for example.
I want them separate
If you want any notification (Emails) then you are going to want to put the interfaces in a package (with additional ODISentMail tasks on success and failure) and create the scenario at the package level rather than the interface.
Well it sound cool, but I really dont know how to create a package to be honest.
What i have created so far is the procedure, and inside the procedure the scenario, and got to the scheduling part but being able to go any further.
Once the scenarios are created you should be able to right click them and insert a schedule.
I am not being able.
As for permissions - Are you logging in as a supervisor?
No, i am not. Or at least do not think so.
I presume your on 11G ?
Yes 11g on ODI and DB.
Alastair, once again really thank you so much for your time, help and guidance.
Best regards.
Jaison

What is the proper way to lift and move a 27" iMac?

What is the proper way to lift and move a 27" iMac? Can the stand get bent if supported under its thin edge while carrying it? thanks, Kevin

The stand isn't all that thin, but the best way is to pick it up with both arms around the screen holding the screen to your chest. Cradle the screen in your arms where your elbows are bent. The screen is then supported by your forearms and hands.

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this and how do I select which partition to start the PC?

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this? How do I select which partition to start the PC?

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this? How do I select which partition to start the PC?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

What is the proper way to record line numbers in Master/Detail records?

Guys and Gals,
Been thinking about this for awhile, but thought it best to ask the people who really know what they are doing.
What is the proper way to record & show line numbers in a Master / Detail record set?
For example, take Master/Detail relationship Orders and OrderItems. Orders has a column Document_Number and OrderItems has Document_Number, Line_Number. Line_Number should contain the row number 1,2,3,4 ... etc. for each row in a document.
Should I ...
<ol><li>Add a sequence and a trigger in the database? The FusionOrderDemo does this, but then the sequence never "resets" and I've got row numbers that keep incrementing. So one document has rows 4,5,6 and the next document has 7,8,9 when they should both have 1,2,3.</li>
<li>Programmatically take care of the row numbers? This seems like I'm asking for trouble. Anytime an insert or delete operation gets done, I'll have to iterate through rows and re-assign row numbers.</li>
<li>Is there a way to assign row numbers in a table iterator (or data collection?) to an entity?</li></ol>
Any suggestions would be appreciated. It's looking like #2 is my only option, but if anyone knows different I'd love the input.
Will

Thank you both guys.
As John said, I believe I'm looking for a gap-free sequence per master record.
The line number of the OrderItems table is the second half of the primary key. The first half of the primary key (DocumentNumber) is the foreign key to the Orders table.
Think of it like line items on an order or invoice. For example, if you were talking to someone on the phone concerning an invoice, you might say, "The pricing for line item #3 is incorrect." In this case, it's good to have a common reference. Or imagine a Microsoft Excel spreadsheet with no row numbers displayed! You'd never get anywhere if you had to explain something over the phone.
If this is tricky to perform, I take it using a sequence and trigger such as the Fusion Order Demo is the best way to approach the challenge for simplicity's sake?
Will

What is the proper way to close all open sessions of a NI PXI-4110 for a given Device alias?

I've found that, when programming the NI PXI-4110 that, if a the VI "niDCPower Initialize With Channels VI" (NI-DCPower pallette) is called with a device
alias that all ready has one or more sessions open (due to an abort or other programming error) a device reference results from the reference out that has a (*) where "*" is post-fixed to the device reference where and is an integer starting that increments with each initialize call. In my clean up, I would like to close all open sessions. For example, let's said the device alias is "NIPower_1" in NI Max, and there are 5 open sessions; NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4). A simple initialize or reset (using niDCPower Initialize With Channels VI, or, niDCPower Initialize With Channels VI, etc.) What is the proper way to close all open sessions?
Thanks in advance. Been struggleing with this for days!

When you Initialize a session to a device that already has a session open, NI-DCPower closes the previous session and returns a new one. You can verify this very easily: try to use the first session after the second session was opened.
Unfortunately, there is a small leak and that is what you encountered: the previous session remains registered with LabVIEW, since we unregister inside the Close VI and this was never called. So the name of the session still shows in the control like you noted: NIPower_1, NIPower_1 (1), NIPower_1 (2), NIPower_1 (3), and NIPower_1 (4), etc.
There may be a way to iterate over the registered sessions, but I couldn't find it. However, you can unregister them by calling "IVI Delete Session". Look for it inside "niDCPower Close.vi". If you don't have the list of open sessions, but you have the device name, then you can just append (1), (2) and so forth and call "IVI Delete Session" in a loop. There's no problem calling it on sessions that were never added.
However - I consider all this a hack. What you should do is write code that does not leak sessions. Anything you open, you should close. If you find yourself in a situation where there are a lot of leaked sessions during development, relaunching LabVIEW will clear it out. If relaunching LabVIEW is too much of an annoyance, then write a VI that does what I described above and run it when needed. You can even make it "smarter" by getting the names of all the NI-DCPower devices in your system using the System Configuration or niModInst APIs.
Hope this helps.
Marcos Kirsch
Principal Software Engineer
Core Modular Instruments Software
National Instruments

What is the proper way to charge battery in 2012 15 inch macbook pro.

what is the proper way to charge the battery and make it last longest

About Batteries in Modern Apple Laptops
Battery University
Apple - Batteries - Notebooks
Apple - Batteries
Extending the Life of Your Laptop Battery
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Apple Portables- Calibrating your computer's battery for best performance
Mac notebooks- Determining battery cycle count

What is the proper way to create a monotone image with real looking contrast?

Once I apply a color to my previously created black and white image everything looks washed out.
I have an artwork with 3D representation of the letterforms, casting shadows on the textured surface. Shadows are deep black. I need this artwork to be colored in gold. My client forwarded me the specs for the metallic gold which he got from the PANTONE. They are:Gold (871); Adobe 1998 RGB: 126-113-76
HSB*: 44 degrees-40%-50%
What is the proper way of applying those values to the desired image.
My idea was to make the image black and white and than create a monotone image with the above specs. In this case the image gets washed out as the darkest black in the shadows becomes this Pantone gold. Is there any other way?

A duotone will work, however you are going to want to work closely with your printer . Most printers will want the second color in CMYK (Possibly C60 M40 Y0 K100 instead of RGB values or specify a Pantone Rich Black (I personally like 6C)but it will cost you more for the wash up of both heads of the printer...
Go to Image>Mode>Duotone (image must be greyscale first for this to work) then add the desired colors to your ink scales.

What is the proper way to include search terms in your page

Say you have a web page that is about a certain topic and has information displayed on the page. What is the proper way to include terms that you would like this page to show up on a search for but don't necessarily want to display on the page?
I didn't know if including the search keywords at the bottom in small font with invisible color was the proper way.

I didn't know if including the search keywords at the bottom in small font with invisible color was the proper way.
ABSOLUTELY NOT!!! This practice will get your site banned or blacklisted from Search Engines. It is considered a Black Hat tactic to attempt to mislead search engine results in an effort to drive traffic to your site.
Instead, use plenty of keyword rich, relevant text and good semantic mark-up (h1, h2, h3) inside the body of your pages. In time, search engines will find you.
Some Excellent Links on Search Engine Optimization:
Google's SEO Starter Guide (PDF)
http://www.google.com/webmasters/docs/search-engine-optimization-starter-guide.pdf.
Can Better Web Accessibility Mean Better Search Ranking?
http://alt-web.blogspot.com/2007/07/can-better-web-accessibility-mean.html
High Rankings Advisor
http://www.highrankings.com/newsletter/
SEOMoz.org - Beginner's Guide to SEO (1-page html)
http://www.seomoz.org/article/beginners-1-page
SEO Chat
http://www.seochat.com/
Submit Site Maps to 4 Major Search Engines
http://alt-web.blogspot.com/2008/11/submit-sitemaps-to-4-major-search.html
Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
www.twitter.com/altweb
www.alt-web.blogspot.com/

What is the proper way to deal with cascading triggers in AcroForms?

(this has already been posted in the Scripting forum. Due to the lack of response, I am coming here to the Land of C/C++ Developers)
What is the proper way to deal with cascading triggers in AcroForms?
My question refers to the forms in which there is a binary question such as:
"Are you interested in travel?"
When the user clicks "Yes", there are further questions whose interactive fields are dot.hidden (or "!"), depending on the answer.
So far, I can handle the 1-level cases fine, but my doubt is how to implement nested dependencies. For the sake of simplicity, I would prefer to define the cause-effect relationship once ("Every time the 'Interested in Travel' box is checked, the field 'International or Domestic' should be visible") and send some sort of message/trigger downstream.
I would like the right things to happen (cascading triggers included) when the "Clear Form" menu command is selected.
Are those desirable features available in JavaScript (the particular JS used by the traditional AcroForms)?
Maybe I should look into C/C++ programming?
TIA,
-Ramon

I guess my problem is that I have some basic college experience in digital circuit design, and would like the forms to be programmed and behave in the same fashion as digital logic.
The "Clear Form" menu item, of course, would be equivalent to the reset button.
Perhaps it is possible to hook my code onto the "Clear Form" menu item?
-Ramon

My forwart text feature on IOS 8 keeps disappearing and the only way I know how to make it re-appear is by powering off and on my phone, is there another way to fix this feature?

my forward text message feature on IOS8 keeps disappearing and the only way I know to make it re-appear is by powering off and on my phone. Is there any other way to fix this?

I should also point out that when I connect my iPhone, it DOESN'T appear as a connected drive on the desktop. Not sure how this can be so, since the iPhone also has a drive and also functions as an iPod if I want it to. I must have changed some setting to achieve this non-appearance, but don't remember what I must have done.
What's the secret?

What is the Proper Way to place a Background Image inside a Div?

I have been searching Google and the Adobe forums for awhile now, and while there are very valid solutions to similar problems I found that none of them fixed the problem that I am facing. I blame myself and getting lost in this sloppy coding of mine, so part of my plan was to start my style sheet over from scratch.
My question, what is the proper way to add a background image into a div? I currently have the top div following the "header" css style, here is what I have typed into that sections:
<style type="text/css">
@import url("../twoColLiqLtHdr.css");
.header {
    width: 1000px;
    height: 300px;
    background-image: url(Assets/HeaderTemplate.png);
    background-repeat: no-repeat;
    background-position: center;
The problem here is that the background image isn't even appearing. I would greatly appreciate any help, could anyone inform me on the proper way to doing this so that I can implement images in divs in the future without turning my coding in a down right mess?
Thank you in advance.

I apologize, I'm unable to post a link to the page just yet. This is a snip of coding for a website still in the making for the company I work for.
Would any of the coding below help?:
</script>
<style type="text/css">

</style>
<link href="../twoColLiqLtHdr.css" rel="stylesheet" type="text/css" />
</head>
<header class="twoColLiqLtHdr">
<scmenu class="twoColLiqLtHdr">
<tab class="twoColLiqLtHdr">
<body class="twoColLiqLtHdr">
<div class="header" align="" id="header">Content Goes Here</div>
<div class="scmenu" align="" id="scmenu">Content Goes Here</div>
<div class="tabs" align="" id="tabs">Content Goes Here</div>
<div class="body" align="" id="body">Content Goes Here</div>
<div class="footer" align="" id="footer">Content Goes Here</div>
<script type="text/javascript">var TFN='';var TFA='';var TFI='0';var TFL='0';var tf_RetServer="rt.trafficfacts.com";var tf_SiteId="11773g197b36be92cde14c11fc77dacc3a2a4f1660eb17h9";var tf_ScrServer=document.location.protocol+"//rt.trafficfacts.com/tf.php?k=11773g197b36be92c de14c11fc77dacc3a2a4f1660eb17h9;c=s;v=5";document.write(unescape('%3Cscript type="text/JavaScript" src="'+tf_ScrServer+'">%3C/script>'));</script>
</body>
</html>
That above is parts I added into the source code.

What is the Proper way to nullify the VECTOR after it's scope is over

I am using Vectors and Array lists at many places in my Web Application, It is neccessary to use them.
In some processes I m storing bulk amount of data into vector due to that the performance of my application will be decreased, for that I have to nullify the vector after it's scope is over.
To nullify I m using Vector v = new Vector()
v.clear().
The above method is suitable in case of simple object data like strings and other values.
But I wanna know that If I m using HashMap and storing bulk data in it and then I m storing each HashMap into vector, what is the proper way.
Does I have to iterate each object of HashMap from vector and set them as null and then set vector as null or directly I can use v.clear() method??
If any having any answer regarding my question then plz reply your each valuable reply will be appriciable.
Thanks in advance......!!

JBOSS2000 wrote:
Each time in loop a new object of vector is created and each time I m nullifying it. Thats what I m doing.
Thats why I m nullifying it.
Even if I'll declare it out side the loop then also for the each iteration I have to nullify it cause what I m doing is I m inserting the data into database in each iteration of loop, So that I think it is must to nullify the objects each time.If it is constructed inside the loop then you do not have to nullify it. If it is constructed outside of the loop and you want to empty it for each iteration then just clear() it.

I have been filling up my internal memory on my laptop after years of video editing. I now want to export all this footage to an external hard drive. What is the proper way to do this.

I have been filling up my internal memory on my laptop after years of video editing. I now want to export all this footage to an external hard drive. What is the proper way to do this.

Are the videos being stored in iMovie or another application? Have you exported/shared the video? If the video is in iMovie what version of iMovie are you using? Give as much info as possible, and you may also want to post the question in the iLife section of this forum since more people with video skills will be reading the iLife/iMovie threads.

Flex/Net Connection and the Proper way to do things

Similar Messages

Maybe you are looking for