Flex supported data types - Does Flex support MSSQL geometry data type. I use WSDL connection.

I looked at the AMF 3 document but did not find anything there. Connection to the MSSQL database is through WSDL.

PUSH...

Similar Messages

Device type does not support page format

Hi All,
There is one issue when I print a sapscript. I get an error message as follows:
Device type EPESCP9 does not support page format ZSG02
Could someone advise?
Thanks
Alice

Hi,
The page format ZSG02 is not present in Device type EPESCP9.
in SPAD t.code add the page format in that device type.
Better inform to BASIS people they will add page format in that device type.
Refer the link Device type does not support page format
Regards,
Dhina..

What does your account type does not support the view account feature mean?

What does your account type does not support the view account feature mean?

In reference to what? Where are you seeing this message - iTunes? Do you use a credit card for purchases in iTunes or do you download only free content?

Target data source does not support the AGO operation

Hi,
In BI Admin Tool, I join Essbase cube and relational source. Then I apply Ago function to Essbase measures. In BI Answer, I try to run query that includes Essbase Ago measures and relational columns(non measures), error message shows the following detail:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22001] Target data source does not support the AGO operation. (HY000)
When I remove the relational columns or run Essbase current-date messures, the result is fine.
So, what's exact meaning of this error message? and does the relational columns (non-measure) support Essbase measures' Ago function?

to clarify:
fail case:
criteria
YEAR | YTD,gen03 | MONTH_NAME | SALES(YEAR_AGO)
cube dimension: year, ytd,gen03
relational source: month_name
cube measure using AGO(): sales(year_ago)
result: error messageSuccess case:
criteria
YEAR | YTD,gen03 | SALES(YEAR_AGO)
cube dimension: year, ytd,gen03
cube measure using AGO(): sales(year_ago)
result: success~! how can i solve it? thx

OB048 - ED Status from valuation type does not match ED Status handling type TE

Hi,
Good day!
We have experienced an error message (# OB048) indicating that ED Status from valuation type does not match ED Status handling type TE. I have already checked configuration under Tariffs, Duties, and Permits of the Industry Solution Oil & Gas (Downstream) and the following were in order:
1. Excise Duty Group
2. Excise Duty Status
3. Set Handling Type
4. Set Pricing Indicator
5. Maintain excise duty/tax status/account determination
6. Maintain handling type/tax status
May I know what can be the solution to this error message considering that the above configurations were already accomplished.
Thanks in advance.
Regards,
Vensim
Note: Attached is the file with screenshots of the error message. FYR.

EdStevens wrote:
856483 wrote:
<snip>
can i have you mobile contact phone number if possible?
I have seen some pretty astonishing requests on this board, but this one really raises (or lowers) the bar. Just what is it your boss is paying you to do?
Some listserves have lots of people giving their number. I find it odd that people would, but not astonishing for someone to ask. Outside the norm here, but how would someone know ahead of time? It's a bravely connected new world.

Envy 17-j141na SD card reader - what card types does it support

As in the title really - what card types does the SD reader on the Envy 17-j141na support? I can't find this actually documented anywhere.
I know it supports up to SDHC, does it support the SDXC standard ?
Mike

Good Morning mykejb,
As I stated your specifications do not state the exact cards it supports. I regret that I am unable to give you a yes or no answer.
If you check around the card reader itself, sometimes on the bottom of the notebook, it will list the supported card types. If not all I can suggest is try and see. If it seems if the card is too small for the slot, you may need an adapter for an SDXC card.
Here is a link to SD/SDHC/SDXC Specifications and Compatibility( from scan disk support). Please note this quote"NOTE: Internal card readers on laptops from 2008 and prior may NOT support SDXC cards. SDXC cards will work in SDHC compatible readers (not SD readers) if the computer OS supports exFAT. For more information on exFat see: Operating Systems that support the exFAT File System"
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Data Refesh does not support script only queries

I created a Power Query transformation that does not contain any data source because it generates a fixed table (imagine a Date Table, with certain columns marked based on current day value). I receive this alert trying to create the data source:
Discover data sources - You can only use a connection string that has SQL Server or Oracle data sources. Also, the data sources cannot include native queries. Tracing ID: 040eda49-bcf9-4c82-af1c-69f6efb26cd0 - ‎07‎.‎55‎.‎44
The refresh fails with this error:
Failure
Correlation ID:
10225488-17be-4256-b03e-be975b87a281
OnPremise error: Sorry, we can't refresh connections to this kind of data source in Power Query yet.
I am wondering whether I can workaround the check by creating a SQL Query that returns an empty table that will be ignored in a following join, but is that really necessary? Why not refreshing a transformation that doesn't access to any data source?
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

I tried to workaround the issue using the script below. However, even if creating the Data Source in Data Management Gateway worked well, without raising any error, I had this error (script follows).
Is the Table.Combine limited? Or what is the issue in this case?
Thanks!
Marco
Scheduled start time: 5/3/2014 1:58 PM
Actual start time: 5/3/2014 2:31 PM
Failure time: 5/3/2014 2:31 PM
Status:
Failure
Correlation ID: 3abb39be-05df-40e5-8366-45bdf58ccdc3
Data connections status:
Power Query - DimProductCategory
OnPremise error: Sorry, we can't refresh connections to this kind of data source in Power Query yet.
Report owner: Marco Russo
let
Tab1 = #table( {"Number"}, { {1}, {2}, {3}, {4}, {5} } ),
Source = Sql.Database("servername", "AdventureWorksDW2012"),
dbo_DimProductCategory = Source{[Schema="dbo",Item="DimProductCategory"]}[Data],
FilteredRows = Table.SelectRows(dbo_DimProductCategory, each [ProductCategoryKey] = 0),
InsertedCustom = Table.AddColumn(FilteredRows, "Number", each 0),
RemovedColumns = Table.RemoveColumns(InsertedCustom,{"ProductCategoryKey", "ProductCategoryAlternateKey", "EnglishProductCategoryName", "SpanishProductCategoryName", "FrenchProductCategoryName", "DimProductSubcategory"}),
Append = Table.Combine({RemovedColumns,Tab1 })
in
Append
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

HBR sequence on data form does not execute when Planning data form is saved

Has anyone experienced this issue before in Planning? Below I have included the scenario and what has been attempted to correct the situation.
We are using Hyperion Planning/Essbase 9.3.1, sequence contains 3 business rules - 2 executed on the Workforce Cube and 1 transfers totals from Workforce Cube to Main cube. 2 of the BR's contain run-time prompts - 1st BR in the sequence (calculation in Workforce) and 3rd BR in the sequence (transfer of Workforce totals to Main). We are using Projects to assign access priviledges to the BR's and sequences. All 3 business rules, as well as the sequence itself, validate successfully in the admin services console.
In Planning the data form contains BR Properties to "Save on Exit", "Use members on data form" and "Hide prompt". Have tried removing BR from data form, then put BR back on data form. Also tried building a new sequence in EAS console and attaching that BR to the existing data form. Neither of these attempts were successful. Tried building an entirely new data form with the newly created sequence, still unsuccessful. Was able to execute the sequence successfully when processed from the Tools -> Business Rules menu. Sequence was once again successful when I tried modifying the data form to remove property "Hide prompt". Problem with leaving the form in that state is, our users would not know which Planning server they were on as they access the Planning application through Workspace and we currently have 2 application servers in this environment - so essentially they have a 50/50 chance of selecting the correct server.
We have this same setup in another environment where the execution of the sequence on the data form works successfully. We have compared everything that I can think of and it all appears the same in both environments - in fact this used to be successful in this environment, but all of a sudden stopped working earlier this year - we have not applied any patches or upgrades to either environment. Do not know if this is relevant or not, but we do currently utilize Netscaler in both of these environments.
Any experiences with this type of situation or suggestions at this point would be greatly appreciated.

I don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

File Data Source: does not support any other host except LOCALHOST?

I am using US 1.0.3.
This exercpt is from the OTN iLearn Subscribed course titled "Oracle9i UltraSearch New Features" on operating system file access:
"The file protocol is used only for the machine that launches the crawler. You can not specify any other host for this kind of URL, except LOCALHOST."
Does it mean that US 1.0.3 can not be used to search other file servers on the network? For example, we have US 1.0.3 installed on a server S1 which is on a network with other servers (e.g. S2). I want to use US to search files in the folder myDir on server S2. So I tried to create a file data source with this URL:
file://\\s2\myDir\
But I got this error:
Invalid file protocol URL: file//\\s2\myDir\
Hostname of the file URL "file://\\s2\myDir\ is not "localhost".
My question:
(1) Can US 1.0.3 search files on a different server than the one US is running on?
(2) If so, how to specify the URL using the above example for it to work?
(3) If not, how about the newer version of US, 9.2 or 9.02? Can they be used to search files on other network servers/drives?
(4) If no to question (3), is there any plan to support this in the future version of US?
My comment: Not able to search other servers really limits the userfulness of US. I really hope Oracle will consider adding this capability.
Thanks!

More on my previous questions:
Since I posted my previous question, I have read on the 1.0.3 online help that we can define remote crawlers to crawl "on a remote machine other than the Oracle Ultra Search database". So I assume this is how to make US to search on other servers. In the online documentation it also includes the following paragraph on "Remote Crawler Profiles Page":
"Use this page to view and edit remote crawler profiles. A remote crawler profile consists of all parameters needed to run the Ultra Search crawler on a remote machine other than the Oracle Ultra Search database. A remote crawler profile is identified by the hostname. The profile includes the cache, log, and mail directories that the remote crawler shares with the database machine. "
The Remote Crawler Profiles Page, however, displays only remote crawlers already defined and the page seems to be used just for editing the porfiles of these defined remote crawlers.
My questions:
(1) How do I create the remote crawlers and defines the profiles in the first place?
(2) Where can I find more documentation on remote crawlers?
(3) Once the remote crawlers are set up, how do I specify the file URLs for each remote crawler?
(4) With US9.02 or 9.2, does remote crawler work the same as in 1.0.3, or are there any enhancements?
Thanks!

What is native Sql data types and does oracle support this?

what is native Sql data types
Does oracle support this?

http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/datatype.htm#g31099

Getting error when view - Requested data type does not match with existing

I have the siebel web service
In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
BI can recognize the 'Web service' and methods.
I have created the paramters. The data type is 'String'
When I try to view the report using the BI publisher, I am getting teh following error in th UI
"Requested data type does not match with existing data type"
This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
I don't know whether any log file generated wit the details of this erro message
Any help is much appriciated
Thanks,
Kavitha

Hi all,
have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
Any idea?
Thanks a lot, regards
Nestor

Siri does not support Vietnamese

I am using Ipad air. I'm in Vietnam. Why Siri only supports English that does not support Vietnamese

Nobody here can tell you why Apple has not added some feature you want, but you can ask for it via
http://www.apple.com/feedback

Does Verizon support J2ME?

We are developing J2ME cell phone based applications for mobile learning and test preparation See
PowerVocabForGRE2006 at http://www.applimobile.com/
We are running into problems with deploying them on phones from Verizon. I noted that Verizon supports BREW. Does it mean that they have NO SUPPORT for J2ME? Is there an alternate way to get J2ME apps to run on their phones?
Please help! We also have a trial download on our website, so if you wan to try it out on your Verizon phone before replying, that would be awesome. Thanks.

If it support BREW, it does not support J2me! Solution would be:
1. to port the J2me code to brew
2. to make BREW wrappers for the J2me code stuff.
And you don't need to spam to aks questions. It works well without all the crap around it ;)

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

ORA-29829: implementation type does not exist

Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
Tim

ORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type.

Flex supported data types - Does Flex support MSSQL geometry data type. I use WSDL connection.

Similar Messages

Maybe you are looking for