Flex time and fades at the same time?
I can't seem to use fades and flex pitch at the same time on an audio track? Is this a bug or is this the way it should be? Or am I missing something? Or is there a way to work around this?
You need to do the flexing, bounce in place and continue with fade work. Or vice versa. Only heaven knows, when this will be fixed.
DaCaptain
Similar Messages
-
Can you fade in and fade out the same layer in the same page state?
I am simulating a lot of touch interactions, and have a hand object that moves over the simllated screen. I want to add small "taps" under the hands to show touch; I can see how its easy to fade IN an object (say a small circle) that represents the touch; but how do I fade OUT that same object?
Any help appreciated!
RobHey Rob,
I think you can achieve the effect you're looking for by using 'on click' interactions in conjunction with action sequences.
I just made a simple example, here are the steps:
1) Select the component you'd like to react on 'tap'
2) In the Interactions panel, click 'Add Interaction', and select 'play action sequence'
3) The timelines panel should now be given focus, and display the new 'on click' action sequence
4) Select the "circle" you'd like to make the fade in followed by fade out effect. If their opacity is set to 0 at this point, use the layers panel to select them.
5) With the circle selected, in the timelines panel click 'add action', located at the bottom.
6) Select 'fade' from the options available.
7) In the properties panel, define the fade properties (for fade in, obviously set 'from' to be 0, and 'to' to be 100)
8) Repeat steps 5 through 7, but choose from=100 and to=0
9) Arrange the fade in, and fade out events on the timeline to get the timing choreography right.
10) If you haven't done so already, set the opacity of your circles to be 0.
Does this work for you?
Is this what you were looking for?
Let me know if you need clarification on any of the steps.
Thanks for posting, great question!
Tara -
I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But after I sync I only get 6 out of the 9 voice memos on my iPhone.
How do I get the rest (or all) of the memos from my iPhone copied to my computer?
Albro P Michell
[email protected]"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one. -
My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?
OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013 -
How do i start video and audio at the same time in ios
How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.
-
Recording Audio and Midi at the same time in Logic 7 Express Can it be done
I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor
I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL -
Can we use both INSERT and UPDATE at the same time in JDBC Receiver
Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,Hi ,
If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server. If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam -
I 'm getting message "Mozila Firefox not responding." It takes minutes to down load a site - some times just gets in a loop and never down loads. The little circle at top just keeps going round in circles .
Then when I try to click on the screen again the screen goes opaque and I get the same message re " Mozilla Firefox not responding" - and it is minutes before I can get back in to close down screen.
I have downloaded Fire fox version 4 and this is still happening.See:
* http://kb.mozillazine.org/Error_loading_websites -
when my lightroom opens up I keep getting an error message that states, "Lightroom encountered an error whne reading from its preview cache and needs to quit" I have relaunched it a number of times and keep getting the same message. Any thoughts on how to fix this?
You need to delete your preview cache and have Lightroom rebuild it. Cache location can be found here.
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic -
Can I use a camera for application in Labview and VBAI at the same time ?
Dear all,
I'm trying to save an AVI file with Labview and make an image process with VBAI at the same time, in one machine.
The error : "Camera already in use" displayed.
My Camera is a GIGE and I work with Imaqdx. I've test the multicast mode but it only operate with several machines.
How can I do this ?
Thank's to help me,
Yoann BI'm not necessarily saying that. It's been a while since I've used VBAI, so I don't remember all of the capabilities, but if VBAI can do the inspection and recording at the same time, you should be fine.
The trick is that only one program can access the camera at the same time. That application reserves the camera, thus making it unavailable to others.
Chris
Certified LabVIEW Architect
Certified TestStand Architect -
My SB Audigy 2 card can't use headset and musicamplifier at the same time
Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
MichaelIf you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM -
MY HUSBAND AND I SHARED THE SAME EMAIL ADDRESS, AT THAT TIME I HAD DOWNLOADED MUSIC TO MY PHONE. I GOT MY OWN EMAIL ADDRESS AND ADDED THAT EMAIL TO THE ORIGINAL ACCOUNT, WHICH ORIGINATED WITH MY HUSBANDS EMAIL.
HOW CAN I GET THE MUSIC DOWNLOADED TO MY IPHONE.nshepley wrote:
I GOT MY OWN EMAIL ADDRESS AND ADDED THAT EMAIL TO THE ORIGINAL ACCOUNT, WHICH ORIGINATED WITH MY HUSBANDS EMAIL.
Please turn off your CAPS LOCK!
How did you "add that email to the original account"?
You changed the AppleID to your new email address? -
My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?
Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/ -
my dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why? and how do i fix this
Settings > FaceTime > iPhone Cellular Calls > OFF
-
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!
Maybe you are looking for
-
How to set defalut value to DB current date time in EO using sql
HI, I am using below query to set default date time as DB current date select to_char(sysdate, 'DD-MM-YYYY HH24:MI:SS') from dual but it is throwing exception (oracle.jbo.AttributeLoadException) JBO-27021: Failed to load custom data type value at ind
-
WS Best Practice - Is Duplicating Operations in multiple WSDLs OK?
My company is providing Web Services to multiple business partners for B2B and A2A Integration. We have Data Sets (XSD files) that are common to multiple services. One such example is a Customer Profile that contains stuff like Name, Address, Employm
-
Unable to connect to internet through iphone
Hi all I have some trouble connecting to internet throught iphones or ipads using internet sharing. Ive tried both bluetooth and cable. Any ideas where to start?
-
I have used Illustrator CS3 on my two try or three previous computers. Now I try to install Illustrator CS3 on a my new (4 weeks old) computer. Adobe does not allow me, but demands me to proof myself being an owner of Illustrator CS2 or older. I don'
-
How do I disable sharpening during scan?
Hello, Is there a way to disable the sharpening filter that is happening by default? All I can find under "Image correction" are options to change Brightness/Tint/Temperature/Saturation. Im using MacOSX 10.8.5 and downloaded the latest HPUtility 5.10