Flex Time error: Too many disk I/) tasks (Elastic Audio)...

I've been using flex time to take a sample in straight time and make it swing, but I've been having playback issues. I get two different error windows 1) Extreme compress factor detected during playback (Elastic Audio) (-10025) and 2) Too many disk I/O tasks (Elastic Audio). Also, I occasionally get a loud static sound when playing the sample. I don't have this issue when in Flex mode if I only loop the sample twice, but if I try to loop it more than twice, I'll get the errors and/or the static sound. At no point do the stretches make the audio color red, so I don't think I'm over-stretching or over-compressing the audio Is there any way to solve this? Does flex time have limitations to the number of markers used?

Yeah, the I/O error is because you're basically pushing it too hard, it can't read what you're doing fast enough to process it. I got this the other day when I was trying to use flex within a take folder over multiple comped takes.
If you want to swing the audio, why don't you cut it into regions, send it to the EXS 24 and then quantise the samples with swing in the piano roll. That way you're not putting so much pressure on the processor.

Similar Messages

Too Many disk I/O tasks (-10022) error playing song after edits

I have been fighting Logic 9 throwing the "Too Many disk I/O tasks (Elastic Audio) (-10022)" error when playing back a song with 12 tracks of audio AFTER I cut across 8 tracks (of drums) and move regions around. The Disk I/O indicator never shows more than 1-2 bars, tops when this error is thrown. While writing this up and troubleshooting, the problem has seemed to sort itself out, but only after doing some peculiar steps.
*System is MacPro 2x2.26 Quad-Core, 8GB RAM, Mackie Onyx 1620 recording to 500GB WD MyBook Pro over FW800. I/O Buffer = 128.
1) Grouped the 8 tracks of drums (there are 3 takes on each track). Play back song. No problems.
2) Cut the drums at bars 73, 81, 105 and 109.
3) Drag-copied the regions from bars 105-109 to 73-81.
4) Playback song, error thrown at bar 70
5) Increase buffer size to 256.
6) Playback song, error thrown at bar 70
7) Increase buffer size to 512.
8) Playback song, error thrown at bar 70
- Thought this might be a disk problem.
9) I copied the project with all the files to the internal Seagate and open the project.
10) Playback song, error thrown at bar 70
- Thinking this is not a disk problem.
11) Open the project on the original WD external drive.
12) Mute all regions an all drum tracks except the kick.
13) The song plays back normally.
14) Un-mute regions on 1 track and playback and repeat for each track.
15) The song plays back normally until the 8th drum track is un-muted, then the error is thrown.
16) Mute and un-mute the regions on 8th drum track.
17) The song now plays back normally. Error no longer thrown.
Looks like after making the edits, muting all the regions and un-muting them 1 by one might have cleared this up right away.
Is anyone else is experiencing something similar? If so, how are you working around this?

No, didn't solve it yet, after I'm done completing work to meet a deadline, I will do some experimenting and see what I can figure out. But so far I've had this phasing issue occur in two different sessions on two different rigs (both Mac Pro dual-quad core with lotsa RAM)...
One test that anyone could try... to really max it out... take one single source and record it onto 20 tracks at once... or I guess you could just record one track and then duplicate it 19 times, whatever. Group all these tracks, keep `em all at the same level. Then take a listen to all tracks at once using some good headphones.
Then put all the tracks in flex mode and do some flexing, flex every single quarter note this way and that way for three full measures or so, whatever. Then play it back again with headphones. If you hear ANY hint of phase shifting, then you are experiencing what I am experiencing.
For anyone who might not be familiar with the "phase shifting" sound I speak of, it pretty much will sound as if you are running your tracks through a classic "phase shifter" effect pedal or whatever. If using headphones, it'll seem like the audio starts swirling around in your head like some wacky stereo effect, frequency response will change and shift, etc.
I've noted that I have not always heard phase issues when flexing, it seem to be a bit inconsistent. It may be because I've been working in some very large sessions, maybe in my situations Logic was already being heavily taxed and then the extra flexing just put it over the edge. Don't know. Will do some testing perhaps next week.
But, I'd say everyone should be careful about this before bouncing forever to disk and then maybe deleting all your old raw audio, because if you permanently write in some wacky phase shifting between your group of drum tracks and have no original raw files left, you'll be in very big trouble... I don't think there would be any way to fix that. In a professional level mix, that type of issue would stick out like a sore thumb. I guess one fix would be to apply a phase shifter effect across the entire drum bus... on purpose... as some sort of artistic statement... hey, it might sound cool!
This whole issue has made me realize how incredibly important it is for DAW tracks to remain truly phase locked at all times. Been working with DAWs for years now and never really thought about it. In one regard, this is a lot to ask... to make sure your 30-odd tracks or whatever are always dead in time with each other, to the sample. It's certainly of critical importance, at least for multiple tracks of the same exact source (like when you have 12 mics on a drum kit etc).
Actually, perfect time synch is just as critical for even a mere TWO mics on a given source... any stereo recording. Once one track goes out of "synch" with the other, even by a minute amount, just for a short amount of time, you will HEAR it.,.. and it won't be good... unless you desire a wacky phase shifting effect.

Unable to load the following resource: Error: too many columns- form won't

Hi ..
Can you please suggest on the following error, which i am facing the issue while opening data form in Hyperion Planning 11.1.1.4 .
Unable to load the following resource: Error: too many columns- form won't
Regards,
Vasu

It is something around 256 if I am not mistaken, I dread to think what a form with 700 columns is like to work with.
Cheers
John
http://john-goodwin.blogspot.com/

OLE or COM Processing error : Too many fields defined

i have created a excel workbook format in data integrator and defined the fields in it, when i tried to run a simple job extracting data from spreadsheet , i am getting following error OLE or COM Processing error : <Too many fields defined>.
all i have in the spreadsheet is 18 rows and 35 columns of data, can any help how to solve this problem. i have used query transform for extracting and loading the data in to a table
Edited by: Rakesh Chittineni on Apr 1, 2010 3:45 AM

I have Solved the problem my friend suggestion.
The excel file i was trying to access is from WEBI report which was saved as .xls format and then then made some modifications to the spreadsheet.
What i did was i deleted the unused columns, i.e my spread sheet has data upto AQ column so i deleted remaining cells.
and while defining the excel file format i selected the option workbook and selected the proper sheet and in the other options i have chosen column range and also check the box ( extended range) now i could over come the error OLE or COM processing error
Edited by: Rakesh Chittineni on Apr 1, 2010 9:44 PM

[ASUS UX Series] *ERROR* too many voltage retries, give up

Hello,
I get the following errormessage when booting my UX32VD:
"[drm:intel_dp_start_link_train] *ERROR* too many voltage retries, give up"
What does this mean? Kernel: 3.14.1-1.
Last edited by Lax Lexis (2014-04-27 15:37:01)

I have the same issue, as do others; see https://bbs.archlinux.org/viewtopic.php?id=177595. But I haven't found any answers anywhere, nor any real cause for concern.

Too many disk I/O tasks. (Elastic Audio) (-10022)?

I'm also getting an error that says:
Extreme compress factor detected during playback. (Elastic Audio)(-10025)
The project I'm working on is actually quite basic and simple. Logic keeps stopping my sequencer and posting both the messages. What's up?
Thanks in advance!

Are you using Flex? It seems like you are using that, or a feature related to that. And wherever the problem is, you can probably get around it by using Bounce Regions in Place.
Is it always stopping at the same place? I hope so, because that will make is easier to figure out which track(s) is the culprit.

WL10 Compiler executable.exec error "too many open files" deploying ear

When I try to deploy an ear containing a web module and some ejb modules, I obtain this error:
<Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, MB-ADM_EAR [archive: /wl/wlments/MB-ADM_EAR/MB-ADM_EAR.ear], to Cluster1 .>
Task 1 initiated: [Deployer:149026]deploy application MB-ADM_EAR on Cluster1.
Task 1 failed: [Deployer:149026]deploy application MB-ADM_EAR on Cluster1.
Target state: deploy failed on Cluster Cluster1
java.io.IOException: Compiler failed executable.exec:
/wl/servers/MS1/cache/EJBCompilerCache/-1dj0waj53cbu8/it/apps/ejbs/core/ExSvc_167qnt_Impl.java:17: error while writing it.apps.ejbs.core.ExSvc_167qnt_Impl: /wl/servers/MS1/cache/EJBCompilerCache/-1dj0waj53cbu8/it/apps/ejbs/core/ExSvc_167qnt_Impl.class (Too many open files)If i split the ear in two parts, web in one ear and ejbs in another ear, deploy is succesfull.
Do you have any idea of what is happening?
Below the environment specifications:
JVM Version: jrockit_150_11
JVM Heap: 512
Web Logic: 10.0.1.0
Server: Hewlett Packard DL585 G2
OS: Linux / 2.6.5-7.287.3.PTF.345489.1-smp
Thank you, bye,
Marco

Hello Marco.
When you try to deploy an EAR weblogic server at the time of deployment unjar's it and compiles the files and so on. Every Operating system has a limit on how many number of files can be opened by a process. If your EAR is big then the number of files which WLS will unjar will also be large hence you hit the limit. By splitting your ear into 2, you are splitting wls task into smaller parts, which means the number of files it unjars at a time is less.
The following note tells what needs to be done to avert this issue.
http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14772/weblogic_server_issues.htm#CHDGFFHD

Function error: Too many records

I have writing a function that needs to return the total count of a sql statement. It will divide two calculated columns to get an average. I have two versions. Version 1 compiled successfully and I am trying to either run it in Reports or in the database and call it. I get an error stating that the function returns too many records. I understand that is a rule for stored functions but how can I modify the code to get it return one value for each time it is called?
Here is the main calculation. SUM(date1-date2) / (date1-date2) = Avg of Days
version1:
create or replace FUNCTION CALC_OVER_AGE
RETURN NUMBER IS
days_between NUMBER;
days_over NUMBER;
begin
select (determination_dt - Filed_dt), SUM(determination_dt - Filed_dt) into days_between, days_over
from w_all_cases_mv
where (determination_dt - Filed_dt) > 60
and ;
return (days_between/days_over);
END CALC_OVER_AGE;
version2:
CREATE OR REPLACE FUNCTION CALC_OVER_AGE (pCaseType VARCHAR2)
RETURN PLS_INTEGER IS
v_days_between W_ALL_CASES_MV.DAYS_BETWEEN%TYPE;
v_total NUMBER;
days_over NUMBER;
i PLS_INTEGER;
BEGIN
SELECT COUNT(*)
INTO i
FROM tab
WHERE case_type_cd = pCaseType
AND determination_dt - Filed_dt > 60;
IF i <> 0 THEN
select SUM(determination_dt-Filed_dt), days_between
into v_total, v_days_between
from tab
where determination_dt - Filed_dt > 60;
RETURN v_total/v_days_between;
ELSE
RETURN 0;
END IF;
EXCEPTION
WHEN OTHERS THEN
RETURN 0;
END CALC_OVER_AGE;

Table Structure:
WB_CASE_NR NUMBER(10)
RESPONDENT_TYPE_CD VARCHAR2(10)
INV_LOCAL_CASE_NR VARCHAR2(14)
CASE_TYPE_CD VARCHAR2(10)
FILED_DT DATE
FINAL_DTRMNTN_DT DATE
REPORTING_NR VARCHAR2(7)
INVESTIGATOR_NAME VARCHAR2(22)
OSHA_CD VARCHAR2(5)
FEDERAL_STATE VARCHAR2(1)
RESPONDENT_NM VARCHAR2(100)
DAYS_BETWEEN NUMBER
LAST_NM VARCHAR2(20)
FIRST_NM VARCHAR2(20)
DETERMINATION_DT DATE
DETERMINATION_TYPE_CD VARCHAR2(2)
FINAL_IND_CD VARCHAR2(1)
DESCRIPTION VARCHAR2(400)
DETERMINATION_ID NUMBER(10)
ALLEGATION_CD VARCHAR2(1)
ALGDESCRIPTION VARCHAR2(50)
Output is for Reports, I am trying to get the last calculation, which is the Average Days. The reports is grouped on Case Types and has several bucket counts for each like this.
Case Type Count All Completed Pending Over Age Avg Days
A 5 3 4 2 15
Z 10 7 6 3 30
4 8 3 5 4 22
To get the Avg Days, the Over Age calculation is used as well as the Days Between (Determination_Dt - Filed_Dt). That is the (date1-date2) example that I gave in my first post. So the calcuation would be the SUM(Days_Between) / Days_Between.

Final cut x 10.0.5 sqlite error too many sql variables

Hi,
We have a 463MB final cut project that can´t load.
If we see console out, it says:
Final Cut Pro     CoreData: error: (1) I/O error for database at /Volumes/HD Pro RAID/Final Cut Projects/Teaser/CurrentVersion.fcpproject. SQLite error code:1, 'too many SQL variables'
Final Cut Pro    Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Volumes/HD Pro RAID/Final Cut Projects/Teaser/CurrentVersion.fcpproject. SQLite error code:1, 'too many SQL variables' with userInfo = {
     NSFilePath = "/Volumes/HD Pro RAID/Final Cut Projects/Teaser/Teaser con Burgos/CurrentVersion.fcpproject";
     NSSQLiteErrorDomain = 1;
It seems that the project cames to big. I´m not the editor, so i can´t imagine how it could go that way and hao can we open it now.
Thanks.

Hi Jon.
Thanks for your help. I´ve seen a post telling the same thing. I finally let Final cut pro X about 8 hours and it finally opened the project, but i couldn´t make anything with it. Tried to export xml and import it to another project without success. The problem persists. So i also tried to cut some parts from the project and is still the same. For each test we must wait 8 hours and it´s not reasonable time to test things. I just sent the project to apple engineers, so if is there any solution i will post in here.
Thanks.

IDVD false error "too many menus"

When I attempt to copy and paste a large menu tree, iDVD reports a false error message as below:
Too many menus
The maximum number of menus in an iDVD project is 99. No more menus can be created.
However, I have < 20 menus, and I'm copying a tree with ~ 6 + 5 small movies.
After I've generated this error, it will sometimes prevent me from creating submenus normally (Project->Create Submenu) until I restart iDVD, issuing the same error message when I attempt to create the submenu.
My end result will be a DVD with about 30 submenus, each containing some text and a short video.
I appreciate any advice on how to work around or fix this problem. . thanks!
Peter

Hi Peter
Just a wild guess
Can it be so that You included SlideShows - as I get it they can cont. 99 photos each and that this no. has some relation to Chapter handling.
May be there is some problem related to this
• max 99 Photos per SlideShow
• max 99 Chapters per DVD ?
• max 99 Menus per DVD
I would try - Rebuilding a new project and see when or what makes it to react with this Error message.
Yours just thinking - Bengt W

ALE settings error "Too many recipients found for message type" urgent

Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

Hi,
Try to redefine your distribution model to have both receivers of your message type ORDERS in one "model view".
Regards,
Jakub

ALE error "Too many recipients "

Hi all ,
please help me to solve this issue !!!!!!!!
i done with ale settings .
in the bd64 , orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

Hi,
Please refer the link below:
http://www.jt77.com/CRM/related-discussion-6255.html
Thanks,
Sriram Ponna.

Internal error: Too many points in plot

Labview keeps crashing and upon relaunch I get a message saying "... an internal error or crash occurred at plotsupp.cpp, line 4049"
The failure log generated is:
#Date: Thu, Sep 13, 2007 3:37:07 PM
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 8.5
#AppKind: FDS
#AppModDate: 07/25/2007 00:07 GMT
c:\builds\penguin\labview\branches\Jupiter\dev\source\panel\plotsupp.cpp(4049) : DWarn: too many points in plot
$Id: //labview/branches/Jupiter/dev/source/panel/plotsupp.cpp#52 $
0x007D3BDF - LabVIEW <unknown> + 0
0x007D60B2 - LabVIEW <unknown> + 0
0x0130124B - LabVIEW <unknown> + 0
0x011DE932 - LabVIEW <unknown> + 0
0x0123B148 - LabVIEW <unknown> + 0
0x011DE932 - LabVIEW <unknown> + 0
0x0067001A - LabVIEW <unknown> + 0
0x007C379B - LabVIEW <unknown> + 0
0x00B185C9 - LabVIEW <unknown> + 0
0x00B188DA - LabVIEW <unknown> + 0
0x00B18C4D - LabVIEW <unknown> + 0
0x005E1855 - LabVIEW <unknown> + 0
0x0049C139 - LabVIEW <unknown> + 0
0x0049A981 - LabVIEW <unknown> + 0
0x0049C1EC - LabVIEW <unknown> + 0
0x00405678 - LabVIEW <unknown> + 0
0x0040599B - LabVIEW <unknown> + 0
0x0045CFF6 - LabVIEW <unknown> + 0
0x00505D85 - LabVIEW <unknown> + 0
0x00505FAB - LabVIEW <unknown> + 0
0x00505FF0 - LabVIEW <unknown> + 0
0x0149415F - LabVIEW <unknown> + 0
0x7C816FD7 - kernel32 <unknown> + 0
0x00000000 - LabVIEW <unknown> + 0

Yes, while the program is running and consistently it seems to happen shortly after selecting the "ECG Chart" tab, I get the Microsoft error message (Error1.png attached) and after acknowledging the error Labview goes bye bye.
Upon restarting Labview I get the "previous internal error" message (Error2.png attached) and the error log file is generated (lvlog10-04-07-13-48-17.txt attached).
I don't know if it will help since you probably can't run the VI's without the ECG monitoring hardware (a device manufactured by Active Corp. communicating with my PC serially via a COM port), but I will go ahead and attach all of the related subVI's in the ensuing post.
msavina
Attachments:
lvlog10-04-07-13-48-17.txt ‏3 KB
Error1.png ‏10 KB
Error2.png ‏6 KB

Custom Office 2007 Doc Service Errors: Too many, ignored; Filtering Failed

Hi...
We are running SES 10.1.8.4 with the MS Office 2007 workaround outlined at: http://blogs.oracle.com/searchtech/
While indexing production files, a number of the following errors were logged (cleansed to hide actual paths, files names, servers, etc.):
ERROR crawler_5 1114 files inside zip file, Too many, ignored: /.../46629_bin
ERROR crawler_5 EQG-30123: Filtering failed for "http://someserver/somefile.docx&lang=en"; trace information:
1114 files inside zip file, Too many, ignored: /.../46629_bin
It appears like all these errors are for docx files. This could just be a coincidence. We have very limited access to the files themselves due to confidentiality.
In reading the README file for the MS Office 2007 document service, ZIP is one of the required document types for this workaround. Specifically,
the OfficeX files are XML packaged in zip format, so you must tell SES to index zip files
Is the custom MS Office 2007 document service not able to index certain docx files?
Are these files too large and/or complex for indexing?
Any guidance is appreciated.
Thanks!

More information. All the documents that throw this error are between 9.5 - 13.5 MB in size.

0ASSET_AFAB Errors - too many error records update terminated

too many error records update terminated -
It says too many error records as I have set an allowance of 10000 erroneous records in an attempt to get the transactional loads to work as they are dependant on this extracting successfully. This brought through over 10000 erroneous records.
Regards
Helpful answeres are surely rewarded

Hi Voodi / Sorabh,
Message Text: Too many error records - update Terminated
ID: RSM2
NO: 706
Message Text: Error in the update
ID: RSAR
ID: 119
Thanks in advance.

Flex Time error: Too many disk I/) tasks (Elastic Audio)...

Similar Messages

Maybe you are looking for