Flex with Hibernate using HTTP
Hi All,
am new to Flex. Can any one post a simple code on Flex with
Hibernate using HTTP , i mean connecting to database using
Hibernate and invoking the hibernate by using the HTTP service.
can we have a sequence like
Flex(MXML)->JSP->Hibernate->Database .Is it possible?
Thanks in Advance
> can we have a sequence like
Flex(MXML)->JSP->Hibernate->Database .Is it possible?
That's exactly what you're going to have and it certainly is
possible. (Replace the JSP with Servlet, Struts Action, JSF or
whatever)
Usually you'll send data back -- output to JSP or write to
HttpServletResponse object -- in XML or JSON format. The data would
be delivered to the result event of the HTTService in Flex. If it
fails for some reason, the fault event of HTTService class would be
invoked.
The important thing to realize about Flex is that it cannot
directly connect to a DB; you need a server side action that would
get data from wherever write it to response. It's more like Ajax
calls to a JSP/Servlet.
ATTA
Similar Messages
-
XI message with Attachment using Http Adapter
Hi ,
We are using XI/PI 7.0 with Sp09 and Sender Application is SRM and Receiver is Ariba MarketPlace.
We are trying to Send PO with Attachments like Word, PDF etc from SRM to Ariba using Https adapter and from SRM we are using ABAP Proxy. When I did the testing with out any special config, I was able to send the attachments (I can see word doc as part of the payload-attachment) to XI from SRM but this attachment is not going through https adapter from XI to Ariba?
I have read some posts on this but I could not find the answer for my situation. One of the solution is that we can use SOAP adapter but we don't want to use Soap for some reasons.
Please give your thoughts.
Thanks in Advance.
-Laxman> Thanks for your replies, I am little confused, based
> on your references http can't support attachments.
That is true.
> Also sap help link says Http adapter doesn't support
> attachments and XI adapter also doesn't support.
That is not true. XI adapter (in fact we do not talk of an adapter) supports attachments.
> It means Proxy also shouldn't support because proxy is
> nothing but XI adapter.
This is true, ABAP or Java Proxy are like XI adapter. Therefore it supports attachments.
> But When I send PO with attachments from SRM using
> Proxy connection I was able to pass through XI. So
> how proxy was able to send the attachments and this
> is contradicts to the help documentation.
The online help is wrong.
> We don't want to use SOAP because we are already
> using https adapter and this scenario is in
> production also if we go with SOAP then we have to
> re-import the digital certificate in Java Engine for
> SSL. Attachments are the new enhancement only.
I do not see another solution besides using SOAP adapter in so-called non-SOAP mode. Yes you have to reimport the certificates to J2EE stack.
Regards
Stefan -
Load Balancing with ACE using HTTP Header information
Hello,
I am trying to setup a class-map using http loadbalance match-all.
What I want to do is check for the HTTP Host and if it doesnot match the http referer than go to server farm A. if it does match then go to server farm B.
My problem is the host can be serveral different values as well as the referer. Can you setup varibales in the ACE so I can store the value from http host and compare it against http referer?
Thanks
Mike C.It should be like this (If you want to use separate class maps for referrer & Host).
class-map type http loadbalance match-any site1-HostHDR
2 match http header Host header-value ".*site1.com"
class-map type http loadbalance match-any site1-Referer
2 match http header Referer header-value "http://site1.*"
class-map type http loadbalance match-any site2-HostHDR
2 match http header Host header-value ".*site2.com"
class-map type http loadbalance match-any site2-Referer
2 match http header Referer header-value "http://site2.*"
class-map type http loadbalance match-all Site1-policy
2 match class-map site1-HostHDR
3 match class-map site1-Referer
class-map type http loadbalance match-all Site2-policy
2 match class-map site2-HostHDR
3 match class-map site2-Referer
policy-map type loadbalance http first-match Site1
class Site1-policy
serverfarm SFarm-A
class Site2-policy
serverfarm SFarm-A
class class-default
serverfarm SFARm-B
Syed Iftekhar Ahmed -
Creating mysql schema from pojo with hibernate using netbeans
I have been fortunate in finding some good tutorials on how to create POJOs from database schema using hibernate (e.g. http://netbeans.org/kb/docs/web/hibernate-webapp.html).
Does anyone know of tutorials on creating database schemas from POJOs -- preferable using netbeans? Even the very smallest tutorial with one table or two related tables will do.961389 wrote:
I have been fortunateNot really, that is not rare information.
Does anyone know of tutorials on creating database schemas from POJOs -- preferable using netbeans? Even the very smallest tutorial with one table or two related tables will do.Netbeans has little to do with the creation of the schema, it's the container that's usually configured to do it. You can use the "hibernate.hbm2ddl.auto" property to control whether the DDL is created from the entities automatically. -
Is there any tutorial for integrating struts with hibernate using JDevelope
Hi Everybody
I am using Jdeveloper...and I want to know is there any tutorial available for usinfg struts and hibernate.
If anybody knows abt them...plz tell me the links.
Thanks and Regards
K SreenivasA tutorial about using hibernate in JDeveloper is here:
http://www.oracle.com/technology/pub/articles/vohra_hibernate.html
There are many papers and tutorials about Struts in JDeveloper - just go to the tutorials page and technical papers pages linked from the JDeveloper home-page. -
Integrating Flex with jpa using blazeds
Hello
I m using flex builder 4.5 standard version ,and i can not create the combined java/flex project,So i m craete the java class and palced it on the blazeds/WEB-INF/classes.But problem is where to put the persistence.xml file in my flex projectI am just starting to play with this myself.
Apparently the META-INF/persistence.xml has to reside in your WEB-INF/classes directory upon deployment.
Easiest way would be to put it directly into your source folder of your java codebase.
Hope this helps. -
How to use Flex with EJB3?
Anybody know how to integrate Flex with Java?
I have a EJB3 project with JPA etc...
Have to use Eclipse with Flex plugin or can i use Flex Builder and Eclipse only for java classes? (preferring the second option)
I'm getting crazy, because need this for my college work, too fast as possible.
Please any explanation or sample.
Thanks everyone.Matt you say, i do not need to write servlet, create wsdl...
But if i dont do this, my Java Business Rules will be visible to client ?
If yes...
1- I need to write Servlet to use HTTP protocol to connect with Flex, then create wsdl of my EJB3.
2- This wsdl will create client side of my application, then i create my Flex interface normally using HTTP Blaze DS ? -
Hi Friends
I'm developing Flex with java using Blaze-DS under the
Spring MVC. I've problem in using Jboss, Based on BlazeDS
Installation guide
http://opensource.adobe.com/wiki/display/blazeds/Installation+Guide
configure the jboss with Flex.There is no problem with Flex running
in Jboss but it couldn't establish connection and business logic
with java, The Jboss server couldn't through any errors. These same
war file run under the tomcat server. So please help me to solve
this problem.
Thanks&Regrads
PrakasamI don't have any experience with Spring MVC but I was using
JBoss with Blaze-DS without a problem.
so my next question is, can you make a echo to work??
eg, make a function that returns the input string back to the
flex client.
Ries -
can anyone tell me if flex can be integrated with jsp and if yes, can i get a small example of it... plz help.. its uugent
http://flex3.info/using-flex-with-javaserver-pages/
http://livedocs.adobe.com/flex/3/html/help.html?content=data_access_2.html
http://www.coderanch.com/t/478820/Flex/Application-Frameworks/Flex-recive-data-JSP-submitt ed
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com -
Can't use https and Marsedit to edit a user or group blog
Hello,
I wanted to use exclusively https to serve our blogs (group and users).
On Marsedit the following settings works:
Home URL = http://servername+/groups/+groupname/weblog/
RPC URL = http://servername/RPC2
Blog ID = groups/groupname/weblog
The following hhtpS settings do not work:
Home URL = https://servername+/groups/+groupname/weblog/
RPC URL = https://servername/RPC2
Blog ID = groups/groupname/weblog
The solution seems to serve the blogs on http (80) and https (443)
Regards,
ThibaultYou can serve blogs and wiki exclusively through SSL and use Marsedit.
If you have a proper certificate it will work "out of the box".
If you use a self-signed certificate you just need to make sure it has been added to your keychain.
Then Marsedit can initiate properly the encrypted communication.
To add a self-signed certificate, just access your page with Safari using https:// .
You will have a warning dialogue saying the certificate is not trusted blah blah..
Just make sure you add permanently this certificate in your keychain by trusting it.
Hope it helps. -
How to use https inside flex with 2-way authentication
I've got a Flex app which provides a front-end for doing basic CRUD db operations. The app is served up from a Tomcat/Blaze server using 2-way authentication and uses Java objects to do the server-side db work. Serving the app works fine. The problem arises when the data components in the app try to call back to the server to pull data from the db. The HttpService template needs to be https://... but the call cannot complete because Flex does not provide a certificate to the server as the browser does.
Using http://... works fine but then the db data is sent in the clear (which is very bad).
What is the standard way to solve this problem? Is there a way to get Flex to use the same cert that the browser provided?
Thanks for any assistance!
[ RHEL5, Apache Tomcat 5.5.23, JDK 1.5, IE/Firefox browsers]Nitin,
Kindly go through the below links ...
http://help.sap.com/saphelp_nw04/helpdata/en/1f/7e2441509fa831e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
Also, make a search on the SDN as this question has been answered many a times on the forum.
Regards,
Neetesh -
Please help me, I need to use Flex with CF
Hi everyone,
I am starting to retract my brain from an intense 2 days to
figure out how to use Flex with Coldfusion. I am using Coldfusion 8
Beta (this part is good, don't need help for CF itself). I am also
using Flex Builder 2 (with chart but this not the topic). I
installed FDS 2.5 before to install ColdFusion 8 but I think CF8
have is own FDS or something like that... anyway, it might help to
mention it!
Well, I tried HTTPService, RemoteObject, WebSer vice -
NOTHING WORKS!!! Argh! Did I mention I spent 2 days? ;-)))
Well, I start with the basic: a login form with an email (as
a username) and a password to be validated. I have a CFC to do the
validation and return a simple message (string): "OK' when it is
valid and a custom message when it is not valid; depending if it is
the password and/or the email which is not valid.
I always got an error. Since the error is different depending
of the method I use, I will explain the latest method I used in
this message and try to concentrate on that method specifically!
The method is WebService and here is the error:
faultCode:Server.Error.Request
faultString:'HTTP request error'
faultDetail: 'Error: [IOErrorEvent type="ioError"
bubbles:false cancelable=false eventPhase=2
text="Error #2032: Stream Error .
URL=http://localhost:8501/iDashboard/login.cfc"].
URL: http://localhost:8501/iDashboard/login.cfc'
Any help will be very useful!!!
Thank'sCyber,
This may be what you are looking for. It worked well for me.
Flex is sweet, but with the number of people confused about setup
with CF they sure aren't making any friends.
Flex/ColdFusion
setup -
Using EJB with Hibernate on Weblogic Server ADF platform
Hi all,
We use Jdeveloper 11.1.1.4 and WLS 10.3
I tried to use Hibernate on my project according to this link well, EJB with Hibernate On Weblogic
I wanto use Hibernate tool because toplink and eclipselink can not achieve the issue about generating update* ddl on schema, they can just only re-create the tables -not real update.
Firstly i got the related jars from internet: http://www.2hotfile.com/di-LSBU.png
cglib-2.2
antlr-2.7.6
commons-collections-3.1
dom4j-1.6.1
hibernate3
hibernate-validator-4.1.0.Final
javassist-3.9.0.GA
jta-1.1
slf4j-api-1.5.11
slf4j-nop-1.5.11
Then i added to model project as library dependencies: http://www.2hotfile.com/di-GMSZ.png
configured persistence.xml as below:
<?xml version="1.0" encoding="windows-1252" ?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd"
version="1.0">
<persistence-unit name="VakkoEJBModel" transaction-type="RESOURCE_LOCAL">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>jdbc/VakkoDS</jta-data-source>
<properties>
<property name="hibernate.jndi.url" value="t3://127.0.0.1:7001" />
<property name="hibernate.connection.datasource" value="jdbc/VakkoDS" />
<property name="hibernate.transaction.manager_lookup_class" value="org.hibernate.transaction.WeblogicTransactionManagerLookup" />
<property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect" />
<property name="hibernate.hbm2ddl.auto" value="update" />
<property name="hibernate.current_session_context_class" value="jta" />
</properties>
</persistence-unit>
</persistence>
weblogic-application.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<weblogic-application>
<prefer-application-packages>
<package-name>antlr.*</package-name>
<package-name>org.hibernate.*</package-name>
<!-- package-name>org.apache.commons.logging.*</package-name -->
<!-- package-name>org.w3c.dom.*</package-name -->
</prefer-application-packages>
</weblogic-application>
weblogic-ejb-jar.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<weblogic-ejb-jar xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-ejb-jar http://www.bea.com/ns/weblogic/weblogic-ejb-jar/1.0/weblogic-ejb-jar.xsd"
xmlns="http://www.bea.com/ns/weblogic/weblogic-ejb-jar">
</weblogic-ejb-jar>
ejb-jar.xml
<?xml version="1.0" encoding="windows-1252" ?>
<ejb-jar/>
And i added to setDomainEnv.cmd that line:
set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
deployment profile could be seen by clicking those links:
http://www.2hotfile.com/di-XV68.png
http://www.2hotfile.com/di-8YC9.png
http://www.2hotfile.com/di-ADR4.png
And i tried to manipulate the ear file contents according to these informations: http://middlewaremagic.com/weblogic/wp-content/uploads/2010/06/EAR_Application_Diagram.jpg
under ear\META-INF\application.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd" version="5" xmlns="http://java.sun.com/xml/ns/javaee">
<display-name>ejb1</display-name>
<module>
<ejb>ejb1.jar</ejb>
</module>
</application>
under ear\META-INF\weblogic-application.xml
<?xml version = '1.0' encoding = 'windows-1254'?>
<weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd" xmlns="http://www.bea.com/ns/weblogic/weblogic-application">
<prefer-application-packages>
<package-name>org.hibernate.*</package-name>
<package-name>antlr.*</package-name>
<!-- package-name>org.apache.commons.logging.*</package-name -->
<!-- package-name>org.w3c.dom.*</package-name -->
</prefer-application-packages>
<listener>
<listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
</listener>
<listener>
<listener-class>oracle.mds.lcm.weblogic.WLLifecycleListener</listener-class>
</listener>
<library-ref>
<library-name>adf.oracle.domain</library-name>
</library-ref>
</weblogic-application>
The files which existed in ejb1.ear\ejb1.jar\META-INF\ directory same with source folder of model project (these were created by jdeveloper deployment process according to deployment profile which previously explaint)
ear contents shown that link : http://www.2hotfile.com/di-23X6.png
When i deploy the project to weblogic by using JDeveloper or http://127.0.0.1:7101/console/ method. But occured exception
<10-Dec-2012 16:31:54 o'clock EET> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=AppDeploymentsControlPage.>
<10-Dec-2012 16:32:45 o'clock EET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1355149965087' for task '2'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
Truncated. see log file for complete stacktrace
>
<10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'ejb1'.>
<10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
Truncated. see log file for complete stacktrace
>
<10-Dec-2012 16:32:45 o'clock EET> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
at weblogic.deployment.AbstractPersistenceUnitRegistry.storeDescriptors(AbstractPersistenceUnitRegistry.java:349)
at weblogic.deployment.AbstractPersistenceUnitRegistry.loadPersistenceDescriptor(AbstractPersistenceUnitRegistry.java:263)
at weblogic.deployment.ModulePersistenceUnitRegistry.<init>(ModulePersistenceUnitRegistry.java:69)
at weblogic.ejb.container.deployer.EJBModule.setupPersistenceUnitRegistry(EJBModule.java:223)
at weblogic.ejb.container.deployer.EJBModule$1.execute(EJBModule.java:324)
at weblogic.deployment.PersistenceUnitRegistryInitializer.setupPersistenceUnitRegistries(PersistenceUnitRegistryInitializer.java:62)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:393)
What are my mistake/s or incompletes?
Please help me and excuse my poor English. Thanks in advanceThanks again for your consideration.
I double checked CLASSPATH. And seen starting wls with classpath which i defined, but no change about ecxeption.
you can see wls starting classpath through the link: http://www.2hotfile.com/image.php?di=BQNE
setDomainEnv.cmd
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
@REM *************************************************************************
@REM This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
@REM
@REM This script initializes the following variables before calling commEnv to set other variables:
@REM
@REM WL_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
@REM this script to switch between Sun or BEA or just have the default be set.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server. Depends directly on which JAVA_VM value is set by default or by the environment.
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DOMAIN_PRODUCTION_MODE
@REM - The variable that determines whether the workshop related settings like the debugger,
@REM testconsole or iterativedev should be enabled. ONLY settable using the
@REM command-line parameter named production
@REM NOTE: Specifying the production command-line param will force
@REM the server to start in production mode.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
@REM *************************************************************************
set COMMON_COMPONENTS_HOME=C:\Oracle\Middleware_11.1.1.4\oracle_common
for %%i in ("%COMMON_COMPONENTS_HOME%") do set COMMON_COMPONENTS_HOME=%%~fsi
@REM C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
set CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;%CLASSPATH%;
set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set PORTLET_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set WL_HOME=C:\Oracle\Middleware_11.1.1.4\wlserver_10.3
for %%i in ("%WL_HOME%") do set WL_HOME=%%~fsi
set BEA_JAVA_HOME=
set SUN_JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
if "%JAVA_VENDOR%"=="Oracle" (
set JAVA_HOME=%BEA_JAVA_HOME%
) else (
if "%JAVA_VENDOR%"=="Sun" (
set JAVA_HOME=%SUN_JAVA_HOME%
) else (
set JAVA_VENDOR=Sun
set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
@REM set JAVA_HOME=C:\Oracle\Middleware_11.1.1.4\jdk160_21
@REM We need to reset the value of JAVA_HOME to get it shortened AND
@REM we can not shorten it above because immediate variable expansion will blank it
set JAVA_HOME=%JAVA_HOME%
for %%i in ("%JAVA_HOME%") do set JAVA_HOME=%%~fsi
set SAMPLES_HOME=%WL_HOME%\samples
set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
set LONG_DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
if "%DEBUG_PORT%"=="" (
set DEBUG_PORT=8453
if "%SERVER_NAME%"=="" (
set SERVER_NAME=DefaultServer
set DERBY_FLAG=false
set enableHotswapFlag=
set PRODUCTION_MODE=
set doExitFlag=false
set verboseLoggingFlag=false
for %%p in (%*) do call :SET_PARAM %%p
GOTO :CMD_LINE_DONE
:SET_PARAM
for %%q in (%1) do set noQuotesParam=%%~q
if /i "%noQuotesParam%" == "nodebug" (
set debugFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "production" (
set DOMAIN_PRODUCTION_MODE=true
GOTO :EOF
if /i "%noQuotesParam%" == "notestconsole" (
set testConsoleFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noiterativedev" (
set iterativeDevFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noLogErrorsToConsole" (
set logErrorsToConsoleFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noderby" (
set DERBY_FLAG=false
GOTO :EOF
if /i "%noQuotesParam%" == "doExit" (
set doExitFlag=true
GOTO :EOF
if /i "%noQuotesParam%" == "noExit" (
set doExitFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "verbose" (
set verboseLoggingFlag=true
GOTO :EOF
if /i "%noQuotesParam%" == "enableHotswap" (
set enableHotswapFlag=-javaagent:%WL_HOME%\server\lib\diagnostics-agent.jar
GOTO :EOF
) else (
set PROXY_SETTINGS=%PROXY_SETTINGS% %1
GOTO :EOF
:CMD_LINE_DONE
set MEM_DEV_ARGS=
if "%DOMAIN_PRODUCTION_MODE%"=="true" (
set PRODUCTION_MODE=%DOMAIN_PRODUCTION_MODE%
if "%PRODUCTION_MODE%"=="true" (
set debugFlag=false
set testConsoleFlag=false
set iterativeDevFlag=false
set logErrorsToConsoleFlag=false
@REM If you want to override the default Patch Classpath, Library Path and Path for this domain,
@REM Please uncomment the following lines and add a valid value for the environment variables
@REM set PATCH_CLASSPATH=[myPatchClasspath] (windows)
@REM set PATCH_LIBPATH=[myPatchLibpath] (windows)
@REM set PATCH_PATH=[myPatchPath] (windows)
@REM PATCH_CLASSPATH=[myPatchClasspath] (unix)
@REM PATCH_LIBPATH=[myPatchLibpath] (unix)
@REM PATCH_PATH=[myPatchPath] (unix)
call "%WL_HOME%\common\bin\commEnv.cmd"
set WLS_HOME=%WL_HOME%\server
set XMS_SUN_64BIT=256
set XMS_SUN_32BIT=256
set XMX_SUN_64BIT=512
set XMX_SUN_32BIT=512
set XMS_JROCKIT_64BIT=256
set XMS_JROCKIT_32BIT=256
set XMX_JROCKIT_64BIT=512
set XMX_JROCKIT_32BIT=512
if "%JAVA_VENDOR%"=="Sun" (
set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
echo this is suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuun
) else (
set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
echo this is noooooooooooooooooooooooooooooooooooooooooooooooot sun
if "%JAVA_VENDOR%"=="Oracle" (
set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_JROCKIT_64BIT%m -Xmx%XMX_JROCKIT_64BIT%m
set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_JROCKIT_32BIT%m -Xmx%XMX_JROCKIT_32BIT%m
) else (
set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_SUN_64BIT%m -Xmx%XMX_SUN_64BIT%m
set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_SUN_32BIT%m -Xmx%XMX_SUN_32BIT%m
set MEM_ARGS_64BIT=%CUSTOM_MEM_ARGS_64BIT%
set MEM_ARGS_32BIT=%CUSTOM_MEM_ARGS_32BIT%
if "%JAVA_USE_64BIT%"=="true" (
set MEM_ARGS=%MEM_ARGS_64BIT%
) else (
set MEM_ARGS=%MEM_ARGS_32BIT%
set MEM_PERM_SIZE_64BIT=-XX:PermSize=128m
set MEM_PERM_SIZE_32BIT=-XX:PermSize=128m
if "%JAVA_USE_64BIT%"=="true" (
set MEM_PERM_SIZE=%MEM_PERM_SIZE_64BIT%
) else (
set MEM_PERM_SIZE=%MEM_PERM_SIZE_32BIT%
set MEM_MAX_PERM_SIZE_64BIT=-XX:MaxPermSize=512m
set MEM_MAX_PERM_SIZE_32BIT=-XX:MaxPermSize=512m
if "%JAVA_USE_64BIT%"=="true" (
set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_64BIT%
) else (
set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_32BIT%
if "%JAVA_VENDOR%"=="Sun" (
if "%PRODUCTION_MODE%"=="" (
set MEM_DEV_ARGS=-XX:CompileThreshold=8000 %MEM_PERM_SIZE%
@REM Had to have a separate test here BECAUSE of immediate variable expansion on windows
if "%JAVA_VENDOR%"=="Sun" (
set MEM_ARGS=%MEM_ARGS% %MEM_DEV_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="HP" (
set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="Apple" (
set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
@REM IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
set USER_MEM_ARGS=-Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
if NOT "%USER_MEM_ARGS%"=="" (
set MEM_ARGS=%USER_MEM_ARGS%
set ORACLE_DOMAIN_CONFIG_DIR=%DOMAIN_HOME%\config\fmwconfig
for %%i in ("%ORACLE_DOMAIN_CONFIG_DIR%") do set ORACLE_DOMAIN_CONFIG_DIR=%%~fsi
set WLS_JDBC_REMOTE_ENABLED=-Dweblogic.jdbc.remoteEnabled=false
if "%WC_OHOME_ARGUMENT%"=="" (
set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
if "%PORTLET_OHOME_ARGUMENT%"=="" (
set PORTLET_OHOME_ARGUMENT=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
if "%WC_OHOME_ARGUMENT%"=="" (
set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=-Dplatform.home=%WL_HOME% -Dwls.home=%WLS_HOME% -Dweblogic.home=%WLS_HOME%
set ALT_TYPES_DIR=%COMMON_COMPONENTS_HOME%\modules\oracle.ossoiap_11.1.1,%COMMON_COMPONENTS_HOME%\modules\oracle.oamprovider_11.1.1
set PROTOCOL_HANDLERS=oracle.mds.net.protocol
if "%JAVA_VENDOR%"=="Sun" (
set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
) else (
if "%JAVA_VENDOR%"=="Oracle" (
set EXTRA_JAVA_PROPERTIES=-Djrockit.codegen.newlockmatching=true %EXTRA_JAVA_PROPERTIES%
) else (
set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
set PROTOCOL_HANDLERS=%PROTOCOL_HANDLERS:;="|"%
@REM To use Java Authorization Contract for Containers (JACC) in this domain,
@REM please uncomment the following section. If there are multiple machines in
@REM your domain, be sure to edit the setDomainEnv in the associated domain on
@REM each machine.
@REM
@REM -Djava.security.manager
@REM -Djava.security.policy=location of weblogic.policy
@REM -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
@REM -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
@REM -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.tagging.scopeTags=false %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.analytics.disable-native-partitioning=false %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -noverify %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Dwsm.repository.path=%DOMAIN_HOME%\oracle\store\gmds %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Dcommon.components.home=%COMMON_COMPONENTS_HOME% -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=%DOMAIN_HOME% -Djrockit.optfile=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=%ORACLE_DOMAIN_CONFIG_DIR%\servers\%SERVER_NAME% -Doracle.domain.config.dir=%ORACLE_DOMAIN_CONFIG_DIR% -Digf.arisidbeans.carmlloc=%ORACLE_DOMAIN_CONFIG_DIR%\carml -Digf.arisidstack.home=%ORACLE_DOMAIN_CONFIG_DIR%\arisidprovider -Doracle.security.jps.config=%DOMAIN_HOME%\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=%DOMAIN_HOME%\servers\%SERVER_NAME%\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=%ALT_TYPES_DIR% -Djava.protocol.handler.pkgs=%PROTOCOL_HANDLERS% %WLS_JDBC_REMOTE_ENABLED% %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Djps.app.credential.overwrite.allowed=true %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %EXTRA_JAVA_PROPERTIES%
set ARDIR=%WL_HOME%\server\lib
pushd %LONG_DOMAIN_HOME%
@REM Clustering support (edit for your cluster!)
if "%ADMIN_URL%"=="" (
@REM The then part of this block is telling us we are either starting an admin server OR we are non-clustered
set CLUSTER_PROPERTIES=-Dweblogic.management.discover=true
) else (
set CLUSTER_PROPERTIES=-Dweblogic.management.discover=false -Dweblogic.management.server=%ADMIN_URL%
if NOT "%LOG4J_CONFIG_FILE%"=="" (
set JAVA_PROPERTIES=%JAVA_PROPERTIES% -Dlog4j.configuration=file:%LOG4J_CONFIG_FILE%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %CLUSTER_PROPERTIES%
set JAVA_DEBUG=
if "%debugFlag%"=="true" (
set JAVA_DEBUG=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE
set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole...
) else (
set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -da
if NOT exist %JAVA_HOME%\lib (
echo The JRE was not found in directory %JAVA_HOME%. ^(JAVA_HOME^)
echo Please edit your environment and set the JAVA_HOME
echo variable to point to the root directory of your Java installation.
popd
pause
GOTO :EOF
if "%DERBY_FLAG%"=="true" (
set DATABASE_CLASSPATH=%DERBY_CLASSPATH%
) else (
set DATABASE_CLASSPATH=%DERBY_CLIENT_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar;%POST_CLASSPATH%
) else (
set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar
if NOT "%PRE_CLASSPATH%"=="" (
set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;%PRE_CLASSPATH%
) else (
set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar
if "%PORTLET_ORACLE_HOME%"=="" (
set POST_CLASSPATH=%WC_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar;%POST_CLASSPATH%
) else (
set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar
set POST_CLASSPATH=%PORTLET_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
set POST_CLASSPATH=%DOMAIN_HOME%\wcps-lib\derby-10.6.1.0.jar;%DOMAIN_HOME%\wcps-lib\derbytools-10.6.1.0.jar;%POST_CLASSPATH%
if NOT "%DATABASE_CLASSPATH%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%DATABASE_CLASSPATH%
) else (
set POST_CLASSPATH=%DATABASE_CLASSPATH%
if NOT "%ARDIR%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%ARDIR%\xqrl.jar
) else (
set POST_CLASSPATH=%ARDIR%\xqrl.jar
@REM PROFILING SUPPORT
set JAVA_PROFILE=
set SERVER_CLASS=weblogic.Server
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %WLP_JAVA_PROPERTIES%
set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -Dwlw.iterativeDev=%iterativeDevFlag% -Dwlw.testConsole=%testConsoleFlag% -Dwlw.logErrorsToConsole=%logErrorsToConsoleFlag%
if "%PRODUCTION_MODE%"=="true" (
set JAVA_OPTIONS= -Dweblogic.ProductionModeEnabled=true %JAVA_OPTIONS%
@REM -- Setup properties so that we can save stdout and stderr to files
if NOT "%WLS_STDOUT_LOG%"=="" (
echo Logging WLS stdout to %WLS_STDOUT_LOG%
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stdout=%WLS_STDOUT_LOG%
if NOT "%WLS_STDERR_LOG%"=="" (
echo Logging WLS stderr to %WLS_STDERR_LOG%
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stderr=%WLS_STDERR_LOG%
@REM ADD EXTENSIONS TO CLASSPATHS
@REM set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
if NOT "%EXT_PRE_CLASSPATH%"=="" (
if NOT "%PRE_CLASSPATH%"=="" (
set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%;%PRE_CLASSPATH%
) else (
set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%
if NOT "%EXT_POST_CLASSPATH%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%EXT_POST_CLASSPATH%
) else (
set POST_CLASSPATH=%EXT_POST_CLASSPATH%
if NOT "%WEBLOGIC_EXTENSION_DIRS%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.ext.dirs=%WEBLOGIC_EXTENSION_DIRS%
set JAVA_OPTIONS=%JAVA_OPTIONS%
@REM SET THE CLASSPATH
if NOT "%WLP_POST_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%WLP_POST_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%WLP_POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%POST_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%POST_CLASSPATH%
if NOT "%WEBLOGIC_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%WEBLOGIC_CLASSPATH%
if NOT "%PRE_CLASSPATH%"=="" (
set CLASSPATH=%PRE_CLASSPATH%;%CLASSPATH%
if NOT "%JAVA_VENDOR%"=="BEA" (
set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
) else (
set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
startWebLogic.cmd
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
SETLOCAL
@REM --- Start Functions ---
@REM set JAVA_OPTIONS=-javaagent:C:\jarlar\jrebel\jrebel.jar %JAVA_OPTIONS%
@REM set CLASS_CACHE=false
GOTO :ENDFUNCTIONS
:stopAll
@REM We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if NOT "X%ALREADY_STOPPED%"=="X" (
GOTO :EOF
@REM STOP DERBY (only if we started it)
if "%DERBY_FLAG%"=="true" (
echo Stopping Derby server...
call "%WL_HOME%\common\derby\bin\stopNetworkServer.cmd" >"%DOMAIN_HOME%\derbyShutdown.log" 2>&1
echo Derby server stopped.
set ALREADY_STOPPED=true
GOTO :EOF
:classCaching
echo Class caching enabled...
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dlaunch.main.class=%SERVER_CLASS% -Dlaunch.class.path="%CLASSPATH%" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp %WL_HOME%\server\lib\pcl2.jar
set SERVER_CLASS=com.oracle.classloader.launch.Launcher
GOTO :EOF
:ENDFUNCTIONS
@REM --- End Functions ---
@REM *************************************************************************
@REM This script is used to start WebLogic Server for this domain.
@REM
@REM To create your own start script for your domain, you can initialize the
@REM environment by calling @USERDOMAINHOME\setDomainEnv.
@REM
@REM setDomainEnv initializes or calls commEnv to initialize the following variables:
@REM
@REM BEA_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server.
@REM JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
@REM PATH - JDK and WebLogic directories are added to system path.
@REM WEBLOGIC_CLASSPATH
@REM - Classpath needed to start WebLogic Server.
@REM PATCH_CLASSPATH - Classpath used for patches
@REM PATCH_LIBPATH - Library path used for patches
@REM PATCH_PATH - Path used for patches
@REM WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
@REM JAVA_VM - The java arg specifying the VM to run. (i.e.
@REM - server, -hotspot, etc.)
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DERBY_HOME - Derby home directory.
@REM DERBY_CLASSPATH
@REM - Classpath needed to start Derby.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM CLASS_CACHE - Enable class caching of system classpath.
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
@REM *************************************************************************
@REM Call setDomainEnv here.
set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
@REM Start Derby
set DERBY_DEBUG_LEVEL=0
if "%DERBY_FLAG%"=="true" (
call "%WL_HOME%\common\derby\bin\startNetworkServer.cmd" >"%DOMAIN_HOME%\derby.log" 2>&1
set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS%
set SAVE_JAVA_OPTIONS=
set CLASSPATH=%SAVE_CLASSPATH%
set SAVE_CLASSPATH=
if "%PRODUCTION_MODE%"=="true" (
set WLS_DISPLAY_MODE=Production
) else (
set WLS_DISPLAY_MODE=Development
if NOT "%WLS_USER%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.username=%WLS_USER%
if NOT "%WLS_PW%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.password=%WLS_PW%
if NOT "%MEDREC_WEBLOGIC_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%CLASSPATH%;%MEDREC_WEBLOGIC_CLASSPATH%
) else (
set CLASSPATH=%MEDREC_WEBLOGIC_CLASSPATH%
echo .
echo .
echo JAVA Memory arguments: %MEM_ARGS%
echo .
echo WLS Start Mode=%WLS_DISPLAY_MODE%
echo .
echo CLASSPATH=%CLASSPATH%
echo .
echo PATH=%PATH%
echo .
echo ***************************************************
echo * To start WebLogic Server, use a username and *
echo * password assigned to an admin-level user. For *
echo * server administration, use the WebLogic Server *
echo * console at http:\\hostname:port\console *
echo ***************************************************
@REM CLASS CACHING
if "%CLASS_CACHE%"=="true" (
CALL :classCaching
@REM START WEBLOGIC
echo starting weblogic with Java version:
%JAVA_HOME%\bin\java %JAVA_VM% -version
if "%WLS_REDIRECT_LOG%"=="" (
echo Starting WLS with line:
echo %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
) else (
echo Redirecting output from WLS window to %WLS_REDIRECT_LOG%
%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS% >"%WLS_REDIRECT_LOG%" 2>&1
CALL :stopAll
popd
@REM Exit this script only if we have been told to exit.
if "%doExitFlag%"=="true" (
exit
ENDLOCAL
Edited by: webyildirim on 11.Ara.2012 02:38 -
Revision: 10655
Author: [email protected]
Date: 2009-09-28 13:52:01 -0700 (Mon, 28 Sep 2009)
Log Message:
Removing the hack we came up with for using the MAST plugin in the Flex unit tests.
Modified Paths:
osmf/trunk/framework/MediaFrameworkFlexTest/.actionScriptProperties
osmf/trunk/framework/MediaFrameworkFlexTest/org/openvideoplayer/MediaFrameworkTests.as
Removed Paths:
osmf/trunk/framework/MediaFrameworkFlexTest/org/openvideoplayer/mast/
osmf/trunk/plugins/MASTLib/Hi OMAW8,
It would be better if you could share us the detailed error message in English.
Do you mean that you could run your test in your build agent machine? If so, I doubt that it would be related to the TFS build. I mean that maybe it is not the test issue.
Please share the detailed error in English, and then post this issue to the TFS-build forum would be better for this issue since it works well in build agent machine.
Form link:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsbuild
Reference:
https://msdn.microsoft.com/en-us/library/hh691189.aspx
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do I use HTTPS with iMQ 2.0?
Our business requirement mandates that we have to use tunneling in a SECURE way, i.e. we have to use HTTPS tunneling.
Certainly this requires JMQ client code to open SSL socket instead of plain socket and also requires Web server to be configured and provides some management function to deal with
I like to believe that we are not the only one asking such a feature. Is it doable with JMQ? Is this in the work?Deploying the JMQ2.0 HTTP Tunneling servlet on an https url will enable a
secure connection from the client to the webserver. However, the tunneling
servlet connection to the broker in JMQ2.0 is via a regular TCP connection and
not via SSL.
In our next major release we are adding the feature that provides a secure
connection right from the client through the tunneling servlet (https) and on
to the broker via SSL.
We will (soon) have a beta version available.
Maybe you are looking for
-
Can we email more than one photo at once from the iPad?
It is easy to email a photo from the iPad, one photo at a time, but is it possible to send multiple photos attached to one email from the iPad?
-
Within the last hour, I noticed that my older MacBook Pro, while I was using iTunes, lost contrast on the screen. I am sorry, but I did not take exact notes on this event. Around the same time, I did do a back up, uploaded Apple software, etc. I'm
-
Default value in selection screen in display mode
Hai Friends, In my selection screen i have a parameter PA_LEVEL, this should have a default value as 10 but it should not be in the change mode. i want that to be in the display mode as in FAGLL03 ( Ledger value ). how can i do this. Moderator messag
-
I have a Tiger Server that hosts portable home directories for my Leopard Clients. I cannot get a portable home directory to sync with my Snow Leopard client. Is this possible?
-
Bootcamp doesn't create correctly formatted NTSF partition
I used bootcamp to install partition to install Windows 8 Pro. When installing it gives me an error message stating that the partition must be formatted as NTFS.