Flex with WDA
Hi Experts,
We have a NW 7(2004s) SP 9 installation. Can I run Flex in WDA or should we upgrade to Ehp1?
Is there a license attached to the Flex Plugin for NWDS? Where can I donwload this plugin?
Regards,
Thanu.
1) Yes, you just upgrade to enhancement pack 1, in order to use Flash Islands. 2) yes, there is a separate license for Flex Builder, whether it is standalone or the NWDS plug-in. You must obtain your copy of the same from Adobe.
Regards,
Rich Heilman
Similar Messages
-
Please help me, I need to use Flex with CF
Hi everyone,
I am starting to retract my brain from an intense 2 days to
figure out how to use Flex with Coldfusion. I am using Coldfusion 8
Beta (this part is good, don't need help for CF itself). I am also
using Flex Builder 2 (with chart but this not the topic). I
installed FDS 2.5 before to install ColdFusion 8 but I think CF8
have is own FDS or something like that... anyway, it might help to
mention it!
Well, I tried HTTPService, RemoteObject, WebSer vice -
NOTHING WORKS!!! Argh! Did I mention I spent 2 days? ;-)))
Well, I start with the basic: a login form with an email (as
a username) and a password to be validated. I have a CFC to do the
validation and return a simple message (string): "OK' when it is
valid and a custom message when it is not valid; depending if it is
the password and/or the email which is not valid.
I always got an error. Since the error is different depending
of the method I use, I will explain the latest method I used in
this message and try to concentrate on that method specifically!
The method is WebService and here is the error:
faultCode:Server.Error.Request
faultString:'HTTP request error'
faultDetail: 'Error: [IOErrorEvent type="ioError"
bubbles:false cancelable=false eventPhase=2
text="Error #2032: Stream Error .
URL=http://localhost:8501/iDashboard/login.cfc"].
URL: http://localhost:8501/iDashboard/login.cfc'
Any help will be very useful!!!
Thank'sCyber,
This may be what you are looking for. It worked well for me.
Flex is sweet, but with the number of people confused about setup
with CF they sure aren't making any friends.
Flex/ColdFusion
setup -
Integration of Adobe Flex with SAP Web Dynpro ABAP
I am new to adobe flex development. i am following a tutorial prepared by
Mr. Karthikeyan Venkatesan (Infosys Technologies Limited) Integration of Adobe Flex with SAP Web Dynpro ABAP-for ABAPers
He used flex 3 to develop the flex application. i am using flex 4 downloaded from adobe(At a time Build release I used low version only 3.5). I followed all the steps. At a time of Run the data was not came.
How to fetch the data?
Please Guide how to proceed.Hi Laxmikanth,
For Adebo Flex help..
Please go through Thomas tutorial..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163&overridelayout=true
and ...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480?quicklink=index&overridelayout=true
Hope it might helps you
Thanks,
Kris. -
Hi
I am new to flex and i have a knowledge on jsf .We got a requriment to integrate the flex with jsf .
I googled and i developed the sample application using the fiji (Exadel ) .
When i an running the application in the jboss I GOT EMPTY page then after deselecting the check box of 'blockjavascript' in the browser
am able to see the swf file in the page
can any one help me..
My Project
The mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="1024" height="715" xmlns:ns1="*">
<mx:Form x="22" y="47" width="1200" height="680">
</mx:Form>
<mx:Button x="22" y="5" label="This is Prapansolution" width="280"/>
</mx:Application>
The .jsp
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:fiji="http://exadel.com/fiji"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:rich="http://richfaces.org/rich"
xmlns:ui="http://java.sun.com/jsf/facelets"
version="2.0">
<f:view><h:form id="myForm">
<fiji:swf src="/faces/FirstFlexApp.swf" id="demonew" bgcolor="#FFFFFF" width="820" height="480">
<f:param name="text1" value="Hello" />
</fiji:swf> </h:form></f:view>"vikbar" <[email protected]> wrote in
message
news:gb0tug$7je$[email protected]..
> Hi Amy,
>
> Isnt the HistoryManager approach more specific to Flex
application i.e if
> user
> is just navigating with in the flex application? In my
case the user will
> navigate between a JSF page which does not have any SWF
file and the
> another
> one which has swf file embedded. Now everytime when the
suer moves to the
> flex
> embedded JSF page from the Non Flex JSF page these are
the steps which are
> always going to happen :
>
> 1.) System Manager will get initialized and will create
PreLoader
> instance.
> 2.) The preLoader will then try to download the swf
file. Now since this
> is
> the second time the user is coming back to the flex page
so the broswer
> would
> have already cached this swf, so Preloader will skip the
downloading
> swf/RSl
> step and hence you wont see any initialization progress
bar.
>
> 3.) New Application object will get instantiated and
will go through its
> whole
> lifecycle.
>
> So, I guess historyManager approach will work only if
the user stays on
> the
> flex application only and navigates with in flex
application itself(so in
> that
> case if the user clicks back then it knows which flex
component or view to
> display), but in my case user will completely move away
from flex page to
> a
> JSF page and then will try to come back.
>
You'd need to put the right stuff in the url to make it work,
just like if
you were calling a page that's expecting GET params. I don't
really use the
HistoryManager, so you'll need to either look into this
yourself or ask
someone who knows more about it.
HTH;
Amy -
Hi I'am new to Flex, I like to get started using Flex,
ActionScript3 using Eclipse IDE.. Iam looking for some tutorial or
workshop article how to get Flex with Eclipse IDE.Hi,
Are you talking about using the Flex Plugin or the Flex_SDK?
Not sure about the plugin but you can check out my post on
what I had to do to get the sdk to work with Eclipse 3.3 at
http://www.plentifuldesigns.com/?p=13
Hope this helps
- Keith -
Hi Friends
I'm developing Flex with java using Blaze-DS under the
Spring MVC. I've problem in using Jboss, Based on BlazeDS
Installation guide
http://opensource.adobe.com/wiki/display/blazeds/Installation+Guide
configure the jboss with Flex.There is no problem with Flex running
in Jboss but it couldn't establish connection and business logic
with java, The Jboss server couldn't through any errors. These same
war file run under the tomcat server. So please help me to solve
this problem.
Thanks&Regrads
PrakasamI don't have any experience with Spring MVC but I was using
JBoss with Blaze-DS without a problem.
so my next question is, can you make a echo to work??
eg, make a function that returns the input string back to the
flex client.
Ries -
Hi,
Can we develop a JSPDynPage component, using Adobe Flex as the UI instead of using HTMLB? (by embedding flex components in the jsp file). Is it possible to call methods in other java files from a flex application?
Did anyone try to develop a JSPDynPage component this way?
Regards,
SudhirHi,
Pls check out these links below for this info -
Adobe Flex with RFC -
Binding Data through function module in adobe to display charts
How to connect to SAP Database from a Adobe flex application?
Adobe flex and Sap
Adobe Flex within SAP NetWeaver Developer
Regards
Lekha -
Using Flex with Microsoft Project
I am absolutely brand new to FLEX. What I saw on the Adobe
site was a data chart that could be drilled down to expose
additional layers of "contriburory detail" for the master graph.
What I am wondering is if it is possible to do something
similar using Micrsoft Project Data as the basis. MS Project will
allow users to save the file as XML. So, all the data should be
available in a form understandable to FLEX.
Here's the tricky part (and I can add more detail if needed).
Project will create a summary line (at some level of indentue) and
show you a calculated %Complete such as 47%. So, level of indenture
1 I have the major summary tasks of the project at various status
of %Complete. I believe FLEX can make some type of bar or pie chart
out of that for me. What I want to do is click on a "Level1"
indenture and have it expose the Level2 indure that contributes to
that 47%. Then drill on one of the Level2's to Level3 .... to Level
"n".
This needs to be accomplished in "stand alone" fashion so the
ultimate user can launch a desktop application and tell the
application the name of the Microsoft Project XML file. We will not
be able to use Client/Server ... client side only with the file
located either locally or at least on a network drive.
Can this be done? Has anyone looked at a MS Project XML
schema to see if there is sufficeint information available?
OK, now the blunt truth. It ain't %Complete that I care
about. What I care about is BCWS, BCWP, ACWP, %Complete, and a few
other parameters. These are the "Earned Value Fields". If you do
not know what they are, don't worry about it just now .... it is
really all just time phased data.
Can anyone give me some advice or an opinion? TIA.
JimHi,
Pls check out these links below for this info -
Adobe Flex with RFC -
Binding Data through function module in adobe to display charts
How to connect to SAP Database from a Adobe flex application?
Adobe flex and Sap
Adobe Flex within SAP NetWeaver Developer
Regards
Lekha -
Hi all,
Can anybody provide me with any document that involves integration of Adobe Flex with R/3 RFCs. I have tried SAP Integration woth Adobe Flex in form of Web Services, and it is working fine. Please help.
Regards,
GitaHI,
U can try this code using Adobe Flex 2. BAPI_FLIGHT_GETLIST is used as example.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
<![CDATA[
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
import mx.controls.Alert;
public function fault_getAll(event:FaultEvent):void
Alert.show(event.fault.faultString);
public function result_getAll(event:ResultEvent):void
Alert.show(dsCol.toString());
public function Test():void
ws.BAPI_FLIGHT_GETLIST.send();
]]>
</mx:Script>
<mx:XMLListCollection id="dsCol" source="{ws.BAPI_FLIGHT_GETLIST.lastResult.FLIGHT_LIST.item}"/>
<mx:WebService id="ws" useProxy="false" showBusyCursor="true"
wsdl="http://XXX.XX.XX.XX:8080/sap/bc/soap/wsdl11?services=BAPI_FLIGHT_GETLIST&style=rpc_enc" >
Here XXX.XX.XX.XX - is nothing but Ip address and 8080 is port Number.
<mx:operation name="BAPI_FLIGHT_GETLIST"
resultFormat="e4x" result="result_getAll(event)" fault="fault_getAll(event)" >
<mx:request>
<AIRLINE>AIR</AIRLINE>
<DESTINATION_FROM></DESTINATION_FROM>
<DESTINATION_TO></DESTINATION_TO>
<MAX_ROWS>10</MAX_ROWS>
<DATE_RANGE>
<item>
<SIGN>I</SIGN>
<OPTION>GT</OPTION>
<LOW>20000101</LOW>
<HIGH></HIGH>
</item>
</DATE_RANGE>
<EXTENSION_IN></EXTENSION_IN>
<FLIGHT_LIST></FLIGHT_LIST>
<EXTENSION_OUT></EXTENSION_OUT>
<RETURN></RETURN>
</mx:request>
</mx:operation>
</mx:WebService>
<mx:Button x="116" y="146" label="Button" click="Test()"/>
<mx:DataGrid x="52" y="176" width="601" height="135" dataProvider="">
<mx:columns>
<mx:DataGridColumn headerText="AIRLINEID" dataField="AIRLINEID"/>
<mx:DataGridColumn headerText="AIRLINE" dataField="AIRLINE"/>
<mx:DataGridColumn headerText="CONNECTID" dataField="CONNECTID"/>
<mx:DataGridColumn headerText="FLIGHTDATE" dataField="FLIGHTDATE"/>
</mx:columns>
</mx:DataGrid>
</mx:Application> -
Hi,
I'm new to both flex and adf technologies. It would be helpful if anyone brief the possibility of using flex with ADF.
And also it'll be helpful if someone helps out with any links of tutorials or documentation regarding to use flex with ADF.
Thanks in advance,
Parameswari
Edited by: user12952392 on May 24, 2010 6:13 AMHi Shay,
Thanks for the reply.
In our case we will be getting pre-designed Flex UI pages with separate components. We have to logic in Business Layer to do the CRUD operations with displaying of Graphs.
Just read Edwin Biemond [http://biemond.blogspot.com/2008/07/crud-operations-in-flex-with-adf-bc.html] posts on the same. (integration using Adobe livecycle or blazeDS).
But still not sure how to manage and maintain this whole stack for an application having 50+ pages.
So bit curious how to start the same.
I have posted the same in [http://forums.adobe.com/thread/646720?tstart=0] Flex forum also. Hope to get the reply soon
Thanks. -
Flex with Hibernate using HTTP
Hi All,
am new to Flex. Can any one post a simple code on Flex with
Hibernate using HTTP , i mean connecting to database using
Hibernate and invoking the hibernate by using the HTTP service.
can we have a sequence like
Flex(MXML)->JSP->Hibernate->Database .Is it possible?
Thanks in Advance> can we have a sequence like
Flex(MXML)->JSP->Hibernate->Database .Is it possible?
That's exactly what you're going to have and it certainly is
possible. (Replace the JSP with Servlet, Struts Action, JSF or
whatever)
Usually you'll send data back -- output to JSP or write to
HttpServletResponse object -- in XML or JSON format. The data would
be delivered to the result event of the HTTService in Flex. If it
fails for some reason, the fault event of HTTService class would be
invoked.
The important thing to realize about Flex is that it cannot
directly connect to a DB; you need a server side action that would
get data from wherever write it to response. It's more like Ajax
calls to a JSP/Servlet.
ATTA -
Does anyone have any pointers on how I can integrate Flex with Drools. I want to build a sample app (for my own learning experience) that will integrate Flex with this Open Source Rule Engine. Can anyone point me to a website or book?
Thanks!I don't have any experience with Spring MVC but I was using
JBoss with Blaze-DS without a problem.
so my next question is, can you make a echo to work??
eg, make a function that returns the input string back to the
flex client.
Ries -
hi all.
can anyone tell me ..if we can use Flex with WebDynPro.....?
can we develop flex in NWDS....?
Regards,
SudheerWell you can use Flex inside plain HTML pages. It isn't really much different when using them inside JSP. I'm really just talking about embedding and hosting the flash player. If you want greater interactivity between the Flex portions and the JSP I suggest that you search on the internet for FABridge (Flex Ajax Bridge). This allows you to use JavaScript to interactive with the flex component. I've used this technology within BSP quite a bit:
[/people/thomas.jung/blog/2007/11/14/an-introduction-to-flob-flex-on-bsp|/people/thomas.jung/blog/2007/11/14/an-introduction-to-flob-flex-on-bsp]
Since BSP and JSP are so similar, the same concepts could easily be applied in JSP.
As to the Web Dynpro Islands - the development of the first version is complete and will start to ship in a controlled rollout with Web Dynpro ABAP in NetWeaver Enhancement Package 1 (Q3 2008). I believe that at first we plan to only have SAP delivered components, but will eventually open it up so that anyone can create components that run within the Islands. -
Hi
I am new to flex and i have a knowledge on jsf .We got a requriment to integrate the flex with jsf .
I googled and i developed the sample application using the fiji (Exadel ) .
When i an running the application in the jboss I GOT EMPTY page then after deselecting the check box of 'blockjavascript' in the browser
am able to see the swf file in the page
can any one help me..
My Project
The mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="1024" height="715" xmlns:ns1="*">
<mx:Form x="22" y="47" width="1200" height="680">
</mx:Form>
<mx:Button x="22" y="5" label="This is Prapansolution" width="280"/>
</mx:Application>
The .jsp
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:fiji="http://exadel.com/fiji"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:rich="http://richfaces.org/rich"
xmlns:ui="http://java.sun.com/jsf/facelets"
version="2.0">
<f:view><h:form id="myForm">
<fiji:swf src="/faces/FirstFlexApp.swf" id="demonew" bgcolor="#FFFFFF" width="820" height="480">
<f:param name="text1" value="Hello" />
</fiji:swf> </h:form></f:view>The imageicon only be supported JMenuItem.
how to dispose the case of sub-menu.
JMenu mainMenu = new JMenu("main");
JMenuItem miNew = new JMenu("New", new ImageIcon("..."));
JMenu mnuOpenHistory = new JMenu("Open List"); /// <<<----------------- this item can not support Icon
JMenuItem open1 = new JMenuItem("", new ImageIcon());
mainMenu.add(miNew);
mainMenu.add(mnuOpenHistory); -
can anyone tell me if flex can be integrated with jsp and if yes, can i get a small example of it... plz help.. its uugent
http://flex3.info/using-flex-with-javaserver-pages/
http://livedocs.adobe.com/flex/3/html/help.html?content=data_access_2.html
http://www.coderanch.com/t/478820/Flex/Application-Frameworks/Flex-recive-data-JSP-submitt ed
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Maybe you are looking for
-
Dear All; I currently have a issue with my iPhoto & iPhone, i apologize if this is the incorrect area for assistance. My iPhoto library has been synced with my iphone all my images/photos are saved onto the phone, but i want to put them back onto my
-
HT1620 Should I download the iOS 6.1 or will my iPhone 4 crash?
Should I download iOS 6.1 on my iPhone 4? Or will it crash and I loose data like when I down loaded iOS 6?
-
Hi my itune on my PC has stopped working and every time i try to reinstall it it doesn't work properly and asks me if i want to totally remove itunes or replace/repair. I choose replace/repair but it just closes immediately and says it was interrupt
-
Flash 8 Video Encoder-Optimizing Conversion Speed
'm using the Flash 8 Video Encoder to convert .mov files to flv files. On my station I have the following: Hardware Overview: Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 2.66 GHz Number Of Pro
-
After the latest update it took literally 2 days to put my music back on my iPod Touch (4th Gen) once I hooked it up to my computer. Yesterday I had to interrupt mid-sync because it looked like it was going to take too long and I didn't have the time