Flex with webdynpro for java using Flex Island

Hi Friends,
I am on Netweaver/SAP Enterprise Portal 7.0 SPstack12, I am developing UI for BI reports using VC, I am interested in developing UI using flex and want to integrate those apps with EP, I came to know flux Island supports flux with webdynpro java, basically I am a webdynpro for java developer, I want to develop flux applications with webdynpro for java in NWDS. And i want to know how to use Flex Island with webdynpro for java. So could u please post some useful links.
Thank in advance
Regards
samba

Hi
If you want to try out using ADOBE Flash Islands with WDJ, you would need to download SAP CE 7.1 EhP1 trial version, if not done so already.
The following link may help you in building the WDJ component with Flash Islands..
The specified item was not found.
If you donot want to develop the Flex project you can download the .swf file provided by the SAP mentors:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163
Thanks.
Chitrali

Similar Messages

Charts creation with Webdynpro for Java

Hello everyone,
I am really new to SAP technologies and I have to create charts showing statistics for an application based on CE 7.1 and Webdynpro for Java.
I would like to have some inputs about the best way to achieve this, I saw it exists a business graphics UI and flash islands to use flex with webdynpro.
Thank you for your opinions
Regards,
Joh

Hi Johann,
Please refer to this link might help for your requirement:
[Click Here|http://wiki.sdn.sap.com/wiki/display/WDJava/WebDynproforJavaDemo+Kit]
Hope it helps
Regards
Arun

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Dynamic table data isn't transfered to the context, with webdynpro for java

Hi,
I'm using LifeCycle designer 7.1 and Adobe reader 7.0.5.
I'm trying to make a dynamic table in a PDF form, that will be related to a table in the context.
I've designed the context like it says here: Dynamic Table - same data repeating in all rows
I made a dynamic table and related the cells on the row to the context, by dragging the variables from the DataView into them.
The table is related to TableList, the row to TableWrapper[], and the cells are related like this: TableData[].ItemName
And there's a button which adds a row to the table.
And for some reason, that's not working; When hitting the Submit to SAP button, it doesn't appear as though the data was transferred to the WebDynpro context.
Can anyone help me with it please..?
By the way - I tried using the SAP standard subform controls, the 'Insert Remove Move' control.
When trying it through the PDF preview, it doesn't work - whatever I click displays an error message, and when it runs from the browser - It automatically searches for an update for Adove Reader (I use 7.0.5).
Is it supposed to work only with version 8 of the Adobe Reader?

Well, I reinstalled ACF, and now the Submit button works, and the Insert Remove Move buttons work as well.
But the table context still doesn't work.
I had put some values in the context, in DoInit, and they appeared in the table in the form, but when I changed them in the form it didn't affect the context at all.
There's a simple attribute value related to a text field, which IS affected when changed in the form, and the Submit button is clicked. Only the table doesn't work.
How can I make it work?
Thanks,
Udi Dekel

Open PFD from R/3 with WebDynpro for Java

Hi All,
Could any one of you please suggest on how to open a pdf from R/3 with a WebDynpro (JAVA) application. For example I was trying to display one PDF-Document from Records Management in my Web Dynpro.
Does anyone have a good idea how to solve this problem? Thanks.
regards
Sharam

Hi,
Elobarate your question once again.
your plannig to open the PDF in Webdynpro getting From r/3 system.
Or you are getting the data from R/3 that data wanted to put in PDF.
Let know clearly such we can go ahead.
Thanks,
Lohi.

How to create an xml structure in webdynpro for java using NWDS?

Hi Experts,
I need to call an webservice by passing an xml structure to the webservice.I have the input values loaded on the context,which are basically tied to an Form UI element.Is there anyway in webdynpro to build an xml structure. ,
or do i need to use any open source like JAAS or DOM parser in the webdynpro project.?
Thanks
Aravind

hi,
I was working on exporting table data from wd to Excel sheet. There, i had to create an XML representaion of the context.
Please refer to link, and go through page, 10 and 11 and see id you find anything useful.
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20archive/exporting%20context%20data%20into%20excel%20using%20the%20web%20dynpro%20binary%20cache.pdf]

App page link to "federated portal" menu with webdynpro for JAVA

Hi experts,
we have completed the federated portal configuration from EP to CE7.1
Clients just log in EP, see both EP and CE content.
Now, clients want to make a index page with some link and fashion pictures pointed to exact EP or CE page.
I found a method "WDPortalNavigation.navigateAbsolute" which can do this in EP.
but when i change content path to my CE content, the method failed.
WDPortalNavigation.navigateAbsolute(
               "ROLES://NetWeaver_content_producers/<my CE producer's name>/portal_content/...<my path>",
                         WDPortalNavigationMode.SHOW_INPLACE,
                         null,
                         null,
                         WDPortalNavigationHistoryMode.ALLOW_DUPLICATIONS,
                         null,
                         null,
is there something wrong calling the method? or anything else?
Thanks in advanced!
Fishy

any idea?
thanks.

How to start to work on MDM JAVA API by using webdynpro for java

Hi all
I have basic idea on MDM business package thru portal by using standard iViews.
now i am planning to work on MDM JAVA APIs by using Webdynpro for Java as UI.
1) can you please share the required documents on the same. how to start working on this by using MDM JAVA APIs in webdynpro for java
2) what are the JARs files are required and how to integrate those jar files into webdynpro for java application.
3) is there any SDN help on MDM JAVA API with webdynpro for java? . can you please send the link on the same.
4) can you please help by providing sample code on how to use JAVA APIs for retrieving,deleting,inserting and Updating the data in the database.
if anybody helps on the same then it is the great help to me.
points are always rewardable...
Regards
Suresh babu

Hi Suresh,
You can have the MDM JAVA API javadocs from the link
http://help.sap.com/javadocs/MDM/SP06P2/index.html
There you can see a package named com.sap.mdm.examples.The classes in it contains some examples using which you can start understanding the code.
You need to have MDM JAR files for it. And these JAR files to be used at build time can be added to the project thru :-
Right click on project-> properties->Java Build Path - > Add external JARs
At run time you can add them the reference in
Right click on project-> properties->web dynpro references->library reference.
Thanks
Namrata

Problem in connecting to database from webdynpro for java

Hi
I have a problem in connecting to database from webdynpro application
I am using oracle 10 express edition as database and was able to connect to database from a java application.But was unable to connect from a webdynpro for java.
<b>I guess webdynpro for java uses open sql instead of vendor sql(I looked in the visual admin ,DB is using open sql) so unable to connect to database.Am i right.?</b>
Do i need to make any settings in the visual admin to make it work?
How to solve this problem.Please give me pointers
Thanks
Bala

Hi,
For connecting to Oracle, either you can use the normal JDBC connectivty code directly which is given below :
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@Oracle_server_ip:Oracle port:SID of the Database","user_name","password");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("your query");
In case you want to fetch data through ejbs, these are the steps to be followed :
1) Open the J2EE perspective
2) Create an EJB Module project
3) Right click on ejbModule, create a new EJB (select your EJB type)
4) While creating the ejb itself, you can add business methods by clicking Next in the UI. Another option is after creating the ejb, write the method in the bean, then select the method from ejb-jar.xml -> <bean name> ->method. Right click and select propogate to local & remote.
5) Double click on ejb-j2ee-engine.xml. select your bean and specify a Jndi name for eg: MyJndi.
6) Right click on the EJB project and add classes12.zip file (provided by Oracle) to its build path. (under libraries tab). Also check the same file under Order & Export.
7) Create an Enterprise Application project.
8) Right click on the EJB module project and select add to EAR project, then select the created EAR project.
9) Right click on the EJB project, select Build EJB Archive
10) Right click on the EAR project, select Build Application Archive
11) Open the WebDynpro perspective, open a new project, right click on the project ->properties. Do the following configurations :-
Java Build path - select the EJB project from projects , check the selected project under Order & Export
Project references select the EAR project
WebDynpro references select sharing references tab, click add & make an entry as : <vendor>/<EAR project name without .ear extension>
You can find the vendor name under application-j2ee-engine.xml file of the EAR project. By default it is sap.com. So if my EAR projects name is ABC, my entry would look like sap.com/ABC
12) Now the configurations are over and the EJB can be invoked by writing the client code inside the webdynpro component. Like:
InitialContext context = new InitialContext();
Object obj = context.lookup("MyJndi");
MyEJBHome home = MyEJBHome)PortableRemoteObject.narrow(obj,MyEJBHome.class);
MyEJB mybean = home.create();
int a = 0;
a= mybean.add(10,15);
wdContext.currentContextElement().setSum(a);
where MyEJB is my EJB name and MyJndi is my JNDI name
To connect to Oracle , you can write the usual Java code (given below) as a business methos of the ejb (similar to add() method in the example). And access it like mybean.<businessMethodName>().
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@Oracle_server_ip:Oracle port:SID of the Database","user_name","password");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("your query");
Extracted from Re: Webdynpro and Oracle
http://help.sap.com/saphelp_webas630/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
May be of use to understand the VA Conf /people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
Regards
Ayyapparaj

Instalation to try webdynpro for java

Hi Experts,
I'm trying to perform an instalation to make some tests with webdynpros for java.
In our office we have a 2003 Server Standard edition, but I don't know if I have to install the programs on the Server or on a Personal Computer. I don't know anything about sistem managing or administration
We have downloaded this tryal versions:
- SAP NetWeaver 2004 SP16 --> version java+webdynpro
- SAP NetWeaver 7.0 (2004s) SP9 --> version JavawebdynproComposite Application Framework
A workmate of mane have tryed to install them but he says that he can't complete the installation c'ause an error is recieved at the middle of the instalation.
Does anybode please can give me a clue about how do I have to instal it, where; and wich version? The tests i want to make are about creating webdynpro applications with netweaver developer studio.
Thank-you very much.
Artur.

Hi,
You can get installation guides for every installation you require in service market place.
Try refering this link
https://service.sap.com/instguides.
Hope it helps..
Regards,
Srujana.

Flex with WebDynPro

hi all.
can anyone tell me ..if we can use Flex with WebDynPro.....?
can we develop flex in NWDS....?
Regards,
Sudheer

Well you can use Flex inside plain HTML pages. It isn't really much different when using them inside JSP. I'm really just talking about embedding and hosting the flash player. If you want greater interactivity between the Flex portions and the JSP I suggest that you search on the internet for FABridge (Flex Ajax Bridge). This allows you to use JavaScript to interactive with the flex component. I've used this technology within BSP quite a bit:
[/people/thomas.jung/blog/2007/11/14/an-introduction-to-flob-flex-on-bsp|/people/thomas.jung/blog/2007/11/14/an-introduction-to-flob-flex-on-bsp]
Since BSP and JSP are so similar, the same concepts could easily be applied in JSP.
As to the Web Dynpro Islands - the development of the first version is complete and will start to ship in a controlled rollout with Web Dynpro ABAP in NetWeaver Enhancement Package 1 (Q3 2008). I believe that at first we plan to only have SAP delivered components, but will eventually open it up so that anyone can create components that run within the Islands.

Reading/Writing .xlsx files using Webdynpro for Java

Dear All
I have a requirement to read/write excel files in .xlsx format. I am good in doing it with .xls format using jxl.jar. The jxl.jar doesn't support .xlsx format. Kindly help me in understanding how do I need to proceed on reading/writing .xlsx files using Webdynpro for Java.
Thanks and Regards
Ramamoorthy D

i am using jdk 1.6.22 and IBM WebSphere
when i use poi-3.6-20091214.jar and poi-ooxml-3.6-20091214.jar to read .xlsx file. but i am getting following errors
The project was not built since its classpath is incomplete. Cannot find the class
file for java.lang.Iterable. Fix the classpath then try rebuilding this project.
This compilation unit indirectly references the missing type java.lang.Iterable
(typically some required class file is referencing a type outside the classpath)
how can i resolve it
here is the code that i have used
public class HomeAction extends DispatchAction {
     public ActionForward addpage(
                         ActionMapping mapping,
                         ActionForm form,
                         HttpServletRequest request,
                         HttpServletResponse response)
                         throws Exception {
                         String name = "C:/Documents and Settings/bharath/Desktop/Book1.xlsx";
           FileInputStream fis = null;
           try {
               Object workbook = null;
                fis = new FileInputStream(name);
                XSSFWorkbook wb = new XSSFWorkbook(fis);
                XSSFSheet sheet = (XSSFSheet) wb.getSheetAt(0);
                Iterator rows = sheet.rowIterator();
                int number=sheet.getLastRowNum();
                System.out.println(" number of rows"+ number);
                while (rows.hasNext())
                    XSSFRow row = ((XSSFRow) rows.next());
                    Iterator cells = row.cellIterator();
                    while(cells.hasNext())
                XSSFCell cell = (XSSFCell) cells.next();
                String Value=cell.getStringCellValue();
                System.out.println(Value);
           } catch (IOException e) {
                e.printStackTrace();
           } finally {
                if (fis != null) {
                     fis.close();
            return mapping.findForward("returnjsp");

Offline Interactive PDF Forms Using EMail with WebDynpro for ABAP

These is a tutorial on implementing Offline Interactive PDF Forms using Email to both send out and receive the form back using WebDynpro for Java.
Is it possible to implement the same using WebDynpro for ABAP, specifically receiving the forms via email server.
Regards,
Mark

Hi Mark,
Check this out :
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
Go to section :
Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
and for the ABAP WebDynpro :
SAP Interactive Forms by Adobe in Web Dynpro for ABAP (Session 3A) .
I managed to make it work in my internal sytem.
Goodluck.
Cheers,
Danny

Adobe Interactive forms & WebDynpro for java problem with IE7 and IE8

I have Interactive form ui-element in WebDynpro for java (ver. 7 SP 10) application. It works fine with IE6, but in IE7 (or IE8) it doesn't show that ui-element at all. We have tried to change IE7 security & advanced settings, but we have not made any progress. We have also tried to install/uninstall different Adobe reader versions etc.

I know a little more about the problem now. After viewing the XML source I change the property of the inputfield.
It was like this:
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="ReadOnly">
but i changed the access to be nonInteractive
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="nonInteractive">
now view2 shows the linebreak as in view1... Buut! when im going back to view1 from view2, the linebreaks gets converted into spaces
thats pretty wierd, aint it?

Problem in Uploading excel file using WebDynpro for Java

Hi All
I have followed for Uploading excel file using WebDynpro for Java added by Tulasi Palnati
I done all, but I'm getting 500 Exception please contact u r system admin meag at run time also Jxl/Workbook class not found msag but i downloaded Jxl.jar file and there is no error signals in coding part. How can I solve the Problem.
Thanks
Polaka

Please ask the people in the Web Dynpro Java forum for a solution.

Flex with webdynpro for java using Flex Island

Similar Messages

Maybe you are looking for