Flex3 and MS SQL 2k5
Hey guys;
Just got the FLEX3 and want to connect to SQL2k5, looks like
it always fails to connect to my database.
Any specific steps i need to do using the database Accessor?
thanks;
Mike
Hi Mike,
Flex Builder connects to SQL Server through a TCP/IP
connection. This type of connection it might not be enabled for
your server. Please check if this is the case for you (the default
port is 1433).
Regards,
Miti
Similar Messages
-
CF8 ODBC performance issues w/ SQL 2K5
Problem: A basic "select *" query returning 5 rows is taking
a little over 5000ms.
Platform: Vista Business, CF8 Developer, MS SQL 2K5 Developer
SP2, ODBC Socket using trusted connection
I ran a query against cfartgallery without any performance
problems. Leads me to believe this is an ODBC issue.
(Server monitor memory tracking is off.)
Does anybody have any suggested fixes? Thank you.gdemaria -
I reverted back to using MX7 rather than 8.
I tried using the JDBC driver, which is the default driver on
the first screen--where you have to specify a username and password
and you connect over port 1433-- but I couldn't get that to work.
(This is probably a problem with my SQL server configuration.)
My plan is to play around some more with the JDBC driver. Or,
wait and see if I get an ODBC solution from the forum here. For now
I will develop on MX7 and use CF8 in the live hosting
environment---not an ideal situation, but it's workable. -
Gateway elements and a SQL database connection
Hello,
I've been running into some rather strange activity with a process I created. My process has multiple gateway elements in it, to allow for multiple people to review and comment on a form throughout the process. I have run this process through on my own machine (this has your normal turnkey install on it), a Development server (set up on a VM), and a Production server (server 2003). Both the dev and production servers are set up to point to a SQL database. My turnkey install points to mysql that was installed as part of the turnkey installation. The process runs correctly on my turnkey install, but not on either of the two server installs. On the two servers where the process fails the process will do one of two things when it gets to a gateway. First it may run through all the branches as expected. Or it may decide not to run through a single or multiple branches. The process itself does not stall, nor does any single task show as stalled. When I review the process in the process management module in adminui, the process seems to be missing tasks when the process fails to execute properly. When I review the jBoss logs, I receive TransactionRolledbackLocalException errors and locking errors when LiveCycle tries to connect with the SQL database. It almost seems like something with the SQL database conncetion isn't allowing for the gateway to function properly. I only seem to be able to reproduce this with the servers that point to a SQL database. Has anyone else experienced anything like this? If so how did you resolve it?I am using a WAMP server and Flex3 and I have the same problem.
I have a table called "reservations" in the MySQL database, with the following fields:
reserv_id - int(10)
date - date
begin_time - time
end_time - time
hours - int(10)
price - int(10)
court_id - int(10)
user_id - int(10)
When I "create application from database" I also get the message "Table does not contain any columns.".
why is it so? I was trying to find some solution in Internet, but didn't found nothing .. -
Microsoft SQL 2k5 / full text indexing
I'm pretty sure I know the answer to this but would like to get some confirmation. I have Stellent 7.5.1; Microsoft SQL 2k5 server and Verity. Should full text indexing be checked or unchecked in Sql?
ThanksThe following thread is on the topic of SQL Azure full text indexing not being available:
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/aefcea67-4c9b-4dff-b480-925a32431bcc/sql-azure-fulltext-indexes?forum=ssdsgetstarted
Workaround solution:
How to Use Lucene.NET with Windows Azure SQL Database
QUOTE: "Summary
Lucene.NET is a .NET implementation of the Lucene full-text search engine. This article describes how you can use Lucene.NET to index text data stored in Windows Azure SQL Database, and then perform searches against that data.
NOTE: This does not provide an integrated full-text search experience like the full-text search in SQL Server. Lucene.NET is an external process that is queried separately from SQL Database.
NOTE: This article relies on the Azure Library for Lucene.NET (https://azuredirectory.codeplex.com/
) to store the Lucene.NET catalog in
a Windows Azure storage blob.
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
What is the diffrence between package javax.sql and java.sql
Is javax designed for J2EE?
And when to use package javax?Hi,
What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
1.The java.sql package and
2.The javax.sql package.
java.sql provides features mostly related to client
side database functionalities where as the javax.sql
package, which adds server-side capabilities.
You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Systems
http://www.sun.com/developers/support/ -
Difference between Static SQL Query and Dynamic SQL Query.
Hi,
Please explain the basic difference between static and dynamic sql queries. Please explain with example.Static: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/static.htm
Dynamic: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/dynamic.htm -
Hi Team,
I need to write a SQL to cater the requirements. Below is my requirements:
pagename fieldname fieldvalue account_number consumerID
AFAccountUpdate ArrangementsBroken dfsdff 1234 1234
AFAccountUpdate ArrangementsBroken1 dfsdff 1234 1234
AFAccountUpdate ArrangementsBroken2 dfsdff 1234 1234
AFAccountUpdate ArrangementsBroken2 dfsdff 12345 12345
AFAccountUpdate ArrangementsBroken1 addf 12345 12345
Create table test_pivot_dynamic
pagename varchar(200),
fieldname Varchar(200),
fieldvalue varchar(500),
N9_Router_Account_Number bigint,
TC_Debt_Item_Reference bigint
--Input
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken','addf',1234,1234)
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken1','dfsdff',1234,1234)
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken2','fder',1234,1234)
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken2','dfdfs',12345,12345)
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken1','dfdwe',12345,12345)
insert into test_pivot_dynamic Values('AFAccountUpdate1','Arrangements','addf',1234,1234)
insert into test_pivot_dynamic Values('AFAccountUpdate1','Test1','dfsdff',1234,1234)
--Expected output:
Select 1234,1234,'AFAccountUpdate','ArrangementsBroken','addf','ArrangementsBroken1','dfsdff','ArrangementsBroken2','fder','ArrangementsBroken2','fder'
Select 12345,12345,'AFAccountUpdate','ArrangementsBroken','addf','ArrangementsBroken1','dfdwe','ArrangementsBroken2','dfdfs'
Select 1234,1234,'AFAccountUpdate1','Arrangements','addf','Test1','dfsdff'
so basically we have to pivot and dynamic sql and insert the expected output to a common table which will have all the required fields
Thanks,Ram.
Please don't forget to Marked as Answer if my post solved your problem and use Vote As Helpful if a post was useful. It will helpful to other users.This should give you what you're looking for
SELECT N9_Router_Account_Number,TC_Debt_Item_Reference,PageName,
MAX(CASE WHEN SEQ = 1 THEN fieldname END) AS fieldname1,
MAX(CASE WHEN SEQ = 1 THEN fieldvalue END) AS fieldvalue1,
MAX(CASE WHEN SEQ = 2 THEN fieldname END) AS fieldname2,
MAX(CASE WHEN SEQ = 2 THEN fieldvalue END) AS fieldvalue2,
MAX(CASE WHEN SEQ = 3 THEN fieldname END) AS fieldname3,
MAX(CASE WHEN SEQ = 3 THEN fieldvalue END) AS fieldvalue3,
MAX(CASE WHEN SEQ = 4 THEN fieldname END) AS fieldname4,
MAX(CASE WHEN SEQ = 4 THEN fieldvalue END) AS fieldvalue4
FROM
SELECT *,ROW_NUMBER() OVER (PARTITION BY N9_Router_Account_Number,TC_Debt_Item_Reference,PageName ORDER BY PageName) AS SEQ,*
FROM test_pivot_dynamic
)t
GROUP BY N9_Router_Account_Number,TC_Debt_Item_Reference,PageName
To make it dynamic see
http://www.beyondrelational.com/modules/2/blogs/70/posts/10791/dynamic-crosstab-with-multiple-pivot-columns.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Problem with provisioning and external SQL server connection
I am configuring IPAM 2012 R2 on a our management server. Completed the first step by enabling the feature. No issues.
Now I am on the Provisioning IPAM step. I get to the Configure Database step...
I choose Microsoft SQL server,
What should those values be in the Server name and Database name fields. Instructions show fqdn or ip address but that doesnt seem to be working for me.
I get the following error at the end of the Provisioning IPAM wizard,
IPAM Deployment failed with the following error.
Failed to connect to database server. Check the database name, connectivity and remote access.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
You can restart this provisioning wizard from the IPAM overview page.
From the management server I have tested the SQL Connection with a udl file. I used myServer\myInstance and it works. It reports that I have made the Connection to the server and database with the sql credentials i have provided.
ThanksRan
into a problem with connecting to the DB on the SQL server from the IPAM server. The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port. SQL server was set to use port 1443 for incoming connections.
IPAM was set by default to use 1433.
Also used
netstat-n to identify issue and verified 1443 on SQL server was
being used. Made the correction under the IPAM provisioning wizard and connected to the database. Fixed.
Important note I was able to connect to the database with a .udlfile
without any issues
Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise. Why? -
Difference in behavior of sql and pl/sql after migrating from 9i to 11g
after migrating our database from oracle 9i to oracle11g, the developpers are worry that the behavior of the queries and pl/sql procedures/functions will change
example :
in 9i, select salary,count(*) from emp group by salary, it will display the rows sorted by salary
in 11gi, select salary,count(*) from emp group by salary, it will display the rows not sorted by default, we have to add the clause order by salary.
somebody could give the list of other difference in behavior (SQL and PL/SQL) agter migrating from 9i to 11g
Thanks a lot.Tell your developers: garbage in - garbage out. In relational databases only ORDER BY ensures row order. If your developers relied on GROUP BY implemented by SORT and therefore returning ordered rows they had to realize code they wrote is Oracle release dependent and sooner or later code would require changes. And that "sooner or later" is now reality. In newer versions ORACLE can do GROUP BY via SORT or via HASH. And if it is done via HASH - don't expect ordered results. So tell your developers "payback time".
SY. -
Query Engine report error with Crystal Report 9 And MS SQL SErver 2000
Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...
Refer the above statement highlighted in BOLD. That statement is WRONG. Select what ???? Try any one of the below statement,
select ''
--or
select 0
--or
select null
Regards, RSingh -
Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al BalushiHi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said
-
Hi All,
I have started receiving this error in the logs for the last 10 days and the Schedules Jobs for the database have stopped running. My MS CRM application is working fine.
Can anyone guide me what could be the problem.
Date 17/4/2014 2:04:20 PM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
Date 17/4/2014 2:11:55 PM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]
Date 7/4/2014 11:00:31 AM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]Check this link
http://social.msdn.microsoft.com/Forums/en-US/906da9b5-2482-468c-a424-ae099da2d96b/sql-server-agent-service-account-error?forum=sqlsetupandupgrade
Regards, RSingh -
hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample> -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence
Maybe you are looking for
-
Mandrake 8.0 & Oracle 8.1.7 install - seems OK
After much pains I seemed to have been able to install Oracle 8.1.7 and create a database. Have not tested anything else. 1- I have a fresh install of Mandrake 8.0 2- I follow instruction at http://www.linux-mandrake.com/en/updates/2001/MDKA-2001-006
-
ITunes library incomplete from external Hard Drive
Hey! I just bought an iMac an was trying to make iTunes use a hard drive I already had with music from another mac. My music folder in the external drive says I have over 90gb of music, but when I pass it to iTunes, iTunes says I have les than 80gb.
-
My iphone is smashed at the bottom and i cant slide to unlock what do i do
my iphone is smashed at the bottom and i cant slide to unlock what do i do
-
PM Notification - Item level user-exit
Hello there! I'm trying to use QQMA0008 user-exit (User Subscreen for Additional Data on Notification Item) in order to add new fields to my notification item, but system is just trying to hinder my purposes... And it's at its best! I've already cust
-
I want to install Photoshop elements 11 onto a new computer but have lost my activation code
I have a new pc and want to install my photoshop elemets onto it but have lost my activation code. Tried searching on Adobe, but I did not register the product. How can I retrieve it?