FlexComponent Kit for FlashBuilder

Hi at all
is there an updated version of Flex Component Kit for Flash CS3 for Flex4?
Thanks.
F.

There is an updated Flex Component Kit for Flex 4, but I believe it requires Flash CS4.  The latest MXP is available here: http://forums.adobe.com/message/2688608#2688608

Similar Messages

  • System Recovery Kit for dv7-3165dx fails to restore factory image to replacement hd

    I'm posting this wall of text here in case someone else has any suggestions before I contact HP Support to see what options they have.
    My attempt to recover the factory image to a replacement hard drive in an HP Pavilion dv7-3165dx notebook is failing. An error occurs when SM.exe is trying to merge the WIM files. The SSRD.Log shows an error:
    SM, 13, Set reference file fail
    after that, SM.exe displays this message when run from a command line:
    SM, Failure, Can not load imagex 1 from src WIM file
    The following are the symptoms that the Recovery Manager displays on the screen.
    The Recovery Manager reads the two DVDs and after a few seconds, it pops up an error message:
    Reducer
    C:\RM\Image\TempBASE.WIM was not found.
    The message has on "OK" button that when clicked on, closes the message window.
    After that, nothing happens. No disk or DVD activity for over an hour. The mouse moves, but no key presses have any effect, including CTRL-ALT-DEL. You can use the mouse to move the Recovery Manager window around, and there is nothing hidden behind it. Clicking on the Recovery Manager Back, Next, or Cancel buttons produce no response at all.
    The only option at this point is to hold down the power switch until it powers down.
    When the power is turned back on, the hard drive boots and Recovery Manager displays a message that incorrectly claims "Recovery is complete" and has a "Click Finish to restart" button. After clicking on "Finish", it reboots but since the System Recovery did not actually complete, all it does is display:
    BOOTMGR is missing
    Press CTRL+ALT+DEL to restart
    Before attempting the recovery, the notebook passed all diagnostic tests.
    The 2x2GB memory cards, which still have HP stickers on them, were tested with Memtest86+ V5.01 and completed over six passes in over seven hours with zero errors.
    The replacement 500GB HGST Travelstar Z5K500 drive was tested with gsmartcontrol. The SMART status showed no errors in the past with over 400 hours of power-on time. Both of the SMART short self-test and extended self-test tests were run, which it passed without any errors.
    The HP System Diagnostics from the Startup Menu were run on the memory and hard drive and they passed those tests without any errors.
    While waiting for the HP "System Recovery Kit for Consumer Notebook (3 Disks)" Software Part Number 599357-001 to arrive, both Fedora 21 64bit and Windows Vista 64bit were successfully installed on the harddrive.
    Both System Recovery DVDs were read on different machines without any errors. This System Recovery Kit supports the notebook's System Id which is 3638, so they appear to be the correct discs.
    Now a list of workaround attempts that were suggested.
    After the Recovery Manager failed a few times with the same error message, some googling came up with other users mentioning the "TempBASE.WIM was not found" error message. I tried these suggestions that I read about.
    Run KillDisk to fill the HD with zeros.
    Running Recovery Manager after that failed with the same error message.
    Run the CyberLink Recovery Discs Utility (sp44645.exe).
    Running Recovery Manager after that failed with the same error message.
    Installed Windows VISTA 64bit again and upgraded the BIOS from F10 to F13.
    Running Recovery Manager after that failed with the same error message.
    Try only using a single 2GB memory card to see if it was a 64bit problem.
    Running Recovery Manager after that failed with the same error message.
    The BIOS does not have an option to change from AHCI mode to IDE mode.
    I don't have a Windows 7 OEM install disc and am trying to avoid spending $100 to buy one.
    That is when I decided that it is not a PC hardware problem, but a problem with the HP System Recovery Kit. Here are the details of what I think the Kit is doing.
    After running Recovery Manager and getting the error message, instead of just re-booting and letting the "Recovery is complete" message appear, I re-booted with a Linux USB drive and inspected what was on the hard drive.
    fdisk -l shows this:
    Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: dos
    Disk identifier: 0xa5dddc41
    Device Boot Start End Sectors Size Id Type
    /dev/sda1 409600 143013887 142604288 68G 7 HPFS/NTFS/exFAT
    /dev/sda2 * 143013888 143833087 819200 400M c W95 FAT32 (LBA)
    fsarchiver probe shows this:
    [======DISK=] [=============NAME====] [====SIZE==] [MAJ] [MIN]
    [sda                     ] [HGST HTS545050A7                ]  [  465.76 GB] [     8] [     0]
    [=====DEVICE] [==FILESYS==] [=====LABEL=] [====SIZE==] [MAJ] [MIN]
    [sda1                 ] [ntfs                  ] [<unknown>      ] [     68.00 GB] [    8] [     1]
    [sda2                 ] [vfat                  ] [SDV                     ] [  400.00 MB] [   8] [     2]
    Running gparted shows about 200 MB of unallocated space before the sda1 NTFS partition. The rest of the disk is unallocated after the bootable sda2.
    The sda1 NTFS partition has a \SSRD.Log file and an empty \RM\Image directory.
    The sda2 FAT32 partition has the Recovery Manager application files in it:
    /mnt/sda2:
    total 400
    -rwxr-xr-x 1 root root 15 Apr 9 23:36 SDV.FLG
    drwxr-xr-x 4 root root 4096 Apr 9 23:36 SYSTEM.SAV
    drwxr-xr-x 3 root root 4096 Nov 1 2009 BOOT
    drwxr-xr-x 3 root root 4096 Nov 1 2009 EFI
    drwxr-xr-x 2 root root 4096 Nov 1 2009 SOURCES
    drwxr-xr-x 3 root root 4096 Jul 27 2009 TOOL
    -rwxr-xr-x 1 root root 383562 Jul 13 2009 bootmgr
    The SOURCES directory has boot.wim, and the TOOL directory has all the programs, like Reducer.exe and SM.exe, in it.
    After shutting down the Linux system and rebooting, the Recovery Manager then boots from sda2 and displays the "Recovery is complete" message and "Click Finish to restart" button. During this process, it removes the sda2 partition and marks the sda1 NTFS partition as the active bootable partition. When the PC restarts, all that is left is the sda1 NTFS partition with the empty C:\RM\Image directory and the SSRD.Log file, so there is no BOOTMGR to boot with.
    The SSRD.Log file logs the tasks that the Recovery Manager performs.
    The Recovery Manager runs some initialization tasks and then reads the two System Recovery DVDs. It then calls MergeWimFile which runs SM.exe and starts to merge BASE.WIM with the other BASE*.WIM files. SM.exe merges 20 WIM files with log entries like these:
    SM, Success, refName= C:\RM\IMAGE\BASE22.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE23.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE3.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE4.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE5.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE6.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE7.WIM
    Then, with only two WIM files left, BASE8.WIM and BASE9.WIM, the log shows:
    SM, 13, Set reference file fail
    This must be when Recovery Manager pops up the "Reducer C:\RM\Image\TempBASE.WIM was not found" error message.
    That narrowed down the problem.
    I copied all of the WIM files and the TOOLS directory to a Windows 8.1 system. The two DVDs did not have any errors while being read. Running SM.exe from an admin Command Prompt with the same parameters that were logged in the SSRD.Log produced the same error message. There was an additional error message that appeared in the Command Prompt window:
    SM, 13, Set reference file fail
    SM, Failure, Can not load imagex 1 from src WIM file
    and the TempBASE.WIM was not created.
    SM.exe /? did not provide a help message. I could not find any documentation on the SM.exe command.
    If I removed three of the WIM files, (BASE7.WIM BASE8.WIM BASE9.WIM) then SM.exe could create the TempBASE.WIM file, but it would fail while merging index 2 of 3 with this message:
    SM, 11%, Merge index 2 of 3 Processing
    SM, Failed, Export image failed
    The TempBASE.WIM is 3,421,518 KB in size after that.
    This is where I came to a dead end and cannot think of anything else that I can do. Maybe I'm missing something obvious, but it appears to me that there was some kind of error building this System Recovery Kit and it is not able to perform a factory install on this notebook.
    ps
    If I can figure out how to add an attachment, I will add the SSRD.Log file.  If not, then ask and I will post it as a followup.

    Downloaded Windows Assessment and Deployment Kit which contains the latest imagex program.
    Running imagex.exe on the BASE7.WIM file on the second System Recovery DVD:
    imagex.exe /info K:\PRELOAD\BASE7.WIM
    ImageX Tool for Windows
    Version: 6.2.9200.16384
    Error opening file [K:\PRELOAD\BASE7.WIM].
    The data is invalid.
    The same error message is shown for BASE7.WIM, BASE8.WIM, and BASE9.WIM.
    The other WIM files in the PRELOAD directory, BASE5.WIM, BASE6.WIM, BASE10.WIM, BASE13.WIM, BASE15.WIM, BASE17.WIM and BASE23.WIM, could be read by imagex without any errors.

  • HT4106 I have a camera connection kit for my ipad 2. Can this kit be used with my new ipad air?... If so what adapter is required please

    Camera connection kit for ipad 2. Can this kit be used with ipad air and if so what adapter(s) are required please

    You can try the 30 pin to lightning adapter but I'm not sure if that'll work. So if you get it to experiment, make sure you can return it. Apple does sell a SD to lightning adapter for the newer devices. So that should be a sure bet. The main downside is that your 30 pin camera kit came with both USB and SD for 29 and now the USB adapter is 19 and the SD adapter 29, so more expensive.
    You may want to look into third party adapters, but make sure you use a reputable manufacturer (ie not a cheap no-name off amazon) because iOS7 brought with it software that looks for a signed chip in the adapter. And a chip is 'signed' when a company gets apple's permission to make accessories. I would suggest sticking with companies like Belkin, Kensington and Targus. They seem to be of a better reputation when making things and would have a signed chip.

  • How to add License Key For Integration Tool kit For SAP in Linux Server

    Dear Experts,
    We are Using BO XI R3.1 SP3 Enterprise Version ,Integration Tool Kit For SAP,Live Office.
    The Server is Linux Server.
    But while generating reports in Infoview it is giving error like ""_check that you are licensed to access SAP Data Source_".
    So we came to know that license Key might Expire for Integraton Tool Kit For SAP in Bo Server.
    So can you tell me how to add the license key For BO XI R3.1 SP3 Integration Tool Kit For SAP in Linux Server.
    Thanks & Regards,
    Venkat

    On Unix / Linux you should be able to leverage the response from Raphael and change:
    Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
    For more information verify the below link
    [How do you update the SAP Integration Kit license?;
    Regrads
    Pardhu

  • HT1665 I have a World Travel Adapter Kit for use with my iPad. can the plug adapters also be used on the Mac Pro charger to charge up my laptop when travelling or is a special converter needed.M

    I have a World Travel Adapter Kit for use with my iPad when traveling abroad. I know this charger can be used on an iPhone, can the plug adapters also be used with the charger of a Mac Book Pro or is a special converter required?

    Is there any concern about the type of travel adapter kit? For instance, some instructions indicate they are for heat creating appliances (hairdryers, curling irons, etc.). I bought such a set, but do they present any issues if used with more delicate electronic circuitry (for iPads, iPods, or with camera battery chargers). I am leaving for the UK on Monday and need to get it right - are they too strong for the Apple products if they are not to be used with computers? What other options are out there?

  • SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

    Hello Team,
    We are in a little fix.
    We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
    We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
    Is such a thing available, If yes can someone send a link to that.
    Regards
    Lalan Kanade

    Hi,
    Thanks for the quick reply
    I could trace this document.  "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
    I checked in "Supported Data Sources for Crystal Rep" section, extract below
    SAP BW Server 3.0b SAP GUI 620 or 640
    SAP BW Server 3.1c SAP GUI 620 or 640
    SAP BW Server 3.5 SAP GUI 640.
    But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
    But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
    So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
    Any suggestions on that
    Regards
    Lalan

  • I just purchased a lightning sd card reader for my iPad, but it does not fit..it's for fourth gen...opps..I've now had to order the camera kit for third gen model...will I need both or do I return the first one

    Hi i just purchased an sd card reader but it's for fourth gen iPad...pops. I've now ordered the camera kit for the third gen ....do I need both somehow or do I just return the lightening ad reader I purchased first. I rang apple support and swear I was told keep both, but if the camera kit is all I need...I don't see the point in keeping the fourth gen one, since it won't fit? Confused...ita a fourteen day refund so I need to act fast...any help?

    There's no reaso to keep the Lightning version if your iPad can't support it. Unless you have some other devcie that can use it, like an iPad Mini or an iPhone 5.
    Otherwise return it.

  • GeForce 7300 GT Upgrade Kit for Mac Pro?? G5?

    Hi,
    Just found this on the apple store:
    http://store.apple.com/Apple/WebObjects/ukstore.woa/wa/RSLID?mco=1643C421&nplm=M A567
    "NVIDIA GeForce 7300 GT Graphics Upgrade Kit for Mac Pro"
    Why is it only for mac pro? its PCI express & my g5 is one of the late 2005 models and it has PCI Express so am i wrong in thinking that this should work fine or is it something to do with the new intel architecture?
    If i remember correctly i could have chosen this card or a very similar one when i configured my G5.
    Thanks

    That card is only for the Mac Pro, as it says.
    When you ordered your G5, you had the choice of the nVidia 6600 (or 6600LE), nVidia 7800GT, or the Quadro FX 4500.
    The 7800GT that you could have ordered with your G5 is close in performance to the ATi X1900XT that is an option on the Mac Pro. The 7300GT that you're looking at is an entry level card, which the 7800GT definitely is not.
    The 7300GT and the X1900XT are both Mac Pro only due to the ROM on the card, which is designed to work with the EFI booting hardware that the Mac Pro uses. The G5s used Open Firmware, which requires a different ROM on the video card. So, even though both your G5 and the Mac Pro are PCI-Express based, these video cards are not compatible.
    Now, most PCI-Express cards that you look at for, say, external SATA, will probably work in both the G5 and the Mac Pro. You'd still want to check the specs to be sure, however.
    If you're looking for a new video card to replace your (presumably) nVidia 6600, your only real option is the ATi X1900 G5 edition. This is a different card than the X1900XT that's offered for the Mac Pro.

  • Reviews for ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro?

    There's no review at the Apple Store on this [ATI Radeon HD 4870 Graphics Upgrade Kit for Mac Pro (Early 2009 or Early 2008)|http://store.apple.com/us/product/MB999ZM/A?fnode=MTY1NDA5OQ&mco=NDE4NDMx OA]. Googled and found nothing related to the Mac kit. Mostly PC based.
    Should I consider this card? I need a spare/replacement graphics card for my Mac Pro (early 2008). The NVIDIA GeForce 8800 GT card has failed me twice.

    Just came out on barefeats:
    http://www.barefeats.com/nehal14.html
    Shows new drivers with 285, also compares 4870.
    If you play a lot of games on the windows side, you might also want to consider the 4890. I has recently became flashable (if you're into that kinda thing). It has a lot more leeway to be overclocked. Close to (or if your lucky) hitting the 1 Ghz core clock speed, gives very close comp to the 285, and at fraction of the price. You can get an XFX 4890 on newegg for $195.

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • Anychart 5 integration kit for APEX

    Hello,
    Just wanted to write a quick post to tell everybody we released the Anychart 5 integration kit for APEX a couple of days ago.
    I know a lot of you already tried to integrate a later version of Anychart, the kit (which is free - but you need an Anychart 5 license) should make this more easy for you.
    You can find more information about the kit at http://dgielis.blogspot.com/2008/11/anychart-5-integration-kit-for-apex.html or see the examples at http://anychart.apex-evangelists.com
    Hope you all like it.
    Regards,
    Dimitri
    http://dgielis.blogspot.com/
    http://www.apex-evangelists.com/
    http://www.apexblogs.info/

    Hello Chris,
    I'll try to do that in the next days or early next week. I'm creating another example of such a map.
    In the meantime you can have a look here: http://anychart.apex-evangelists.com/pls/apex/f?p=454:13:0
    Look at the region source. You basically create a 2D Column chart and change the select like I did:
    select null link, REGION label, SALES "{n:Sales;tr:t1}"
    from STATE_SALESFor the region source you can change it to the new Anychart 5:
    <anychart>
        <charts>
            <chart plot_type="Map" use_anychart3_data_model="true" use_sets_colors="false">
    <thresholds>
                            <threshold name="T1" palette="P1" range_count="3" type="EqualSteps"
                                            auto_value="{%Value}"/>
                    </thresholds>
                    <palettes>
                      <palette name="P1">
                        <item color="#E06232" />
                        <item color="#E0D231" />
                        <item color="#6CAC32" />
                      </palette>
                    </palettes>
                <data_plot_settings>
                    <map_series source="states.amap">
                        <defined_map_region>
                            <label_settings enabled="true">
                                <format><![CDATA[{%Name}]]></format>
                                <background enabled="false"/>
                                <font size="9" color="#292929"/>
                            </label_settings>
                            <tooltip_settings enabled="true">
                                <format><![CDATA[{%REGION_NAME} ({%Name}) - ${%Value}
    {numDecimals:0}]]></format>
                            </tooltip_settings>
                        </defined_map_region>
                        <grid>
                            <parallels enabled="false"/>
                            <meridians enabled="false"/>
                            <background enabled="false"/>
                        </grid>
                    </map_series>
                </data_plot_settings>
                <chart_settings>
                    <title>
                        <text>USA Sales Map</text>
                    </title>
                </chart_settings>
        #DATA#
            </chart>
        </charts>
    </anychart>Regards,
    Dimitri
    http://dgielis.blogspot.com/
    http://www.apex-evangelists.com/
    http://www.apexblogs.info/
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

  • How to use the camera connection kit for iPad 3rd generation?

    Hi I just bought a new camera connection kit for my iPad 3rd generation. Does anyone have any experience or knows how to use it? I tried to connect a USB to it and nothing happened. Please help...

    This is how you use it.

  • Cleaning kit for Macbook Pro?

    Hello, I have recently purchased the Macbook Pro. But, as the screen and the exterior parts of the Macbook Pro were getting dirty, I am currently trying to find a cleaning kit for the Macbook Pro and for other electronic devices.
    I hear products like iKlear but I don't know if it is safe.
    I can't find a reliable cleaning kit. Some say it leaves streak and it worries me if it will damage my Macbook Pro and my other electronic devices.
    If possible, please recommend me a kit that can clean the screen, keyboard, and the exterior part (aluminum). Thanks!

    rainequalsteve wrote:
    I already read it, but their description was not clear enough..
    MacBook, MacBook Pro, and MacBook Air
    When cleaning the outside of your MacBook, MacBook Pro, or MacBook Air, first shut down your computer and unplug the power adapter. Then use a damp, soft, lint-free cloth to clean the computer's exterior. Avoid getting moisture in any openings. Do not spray liquid directly on the computer. Do not use aerosol sprays, solvents, or abrasives that might damage the finish.
    To clean the screen on your MacBook, MacBook Pro, or MacBook Air, first shut down the computer and unplug the power adapter. Dampen the included cleaning cloth with just water and wipe the screen. Do not spray liquid directly onto the screen.

  • I just purchased the Apple MB974ZM/B World Travel Adapter Kit for my iphone 5. It says it works for the 4.  Does anyone know if this will work for my iphone 5?

    I just purchased the Apple MB974ZM/B World Travel Adapter Kit for my iphone 5. It says it works for the 4.  Does anyone know if this will work for my iphone 5?

    here is the link to Apples compatibility guide for it.
    http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit

  • Rack mount kit for SRW208P?

    Hello all -- anybody with 2 x rack mount kits for a SRW208P that they don't want? I need to rack mount these devices but my predecessor very wisely decided to throw them out and Cisco does not sell the racks as a separate SKU. Thanks.
    Victor

    Hi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
    -Tom
    Please mark answered for helpful posts

Maybe you are looking for