FlexConnect (aka H-REAP) and Auto-Anchor functionality

Hi Board,
I never did H-REAP on my wireless deployments. Now, I have an H-REAP (FlexConnect) requirement for branch offices.
Also there is the requirement for guest access at the same time.
From my understanding those features (FlexConnect and Auto-Anchor) should work together.
Please refer to the following exibit:
There is a FlexConnect AP at my branch office. The traffic from internal users (SSID "Internal") should be switches locally at the LAP (Lightweight Access Point). At the same time the guest SSID (SSID "Guest") should be tunneled back via CAPWAP to the controller to which the LAP is associated ("Central Controller"). The guest traffic should not emerge (switched) at the "Central Controller", instead it should be tunneled to an anchor controller in a DMZ via an "Ethernet Over IP tunnel" (Auto-Anchor functionality).
First question: Does this work (FlexConnect in conjunction with Auto-Anchor functionality)?
If this works, where's the web portal for guest authentication hosted (if using the internal web auth on WLC)? On the "central controller" or the Anchor controller? (I guess at the Anchor Controller in the DMZ, right?)
Is it possible to leave the guest SSID "open" with no webauth and still using the Anchor Controller? This would be needed if I have an external web authentication service, which would be hosted by a provider.
Thanks in advance for all your replies!
Johannes

The Flex 7500 deployment guide ("
http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml
") states:
"The Cisco FlexConnect Solution also supports Central Client Data Traffic, but it should be limited to Guest data traffic only."
later in the document there is a section about Guest access that states "Flex 7500 will allow and continue to support creation of EoIP tunnel to your guest anchor controller in DMZ."
Hope that helps.

Similar Messages

The Versions and Auto Save functions do they work with Office 2011?

I recently installed LION on my Apple Pro. However the VERSIONS and AUTO SAVE functions do not seem to work with OFFICE 2011 Word and Excel. Does anyone know why?
Gabriel

Waiting for Microsoft to update them

"Auto stop" and "Auto Run" function exist?

"Auto stop" and "Auto Run" function exist?

many thanks...
full of ????
cracking this project issue...
Attachments:
AMK_solar monitoring system.vi ‏1451 KB
datalogger.vi ‏26 KB
Start.vi ‏22 KB

Click to continue and auto-forward functionality

I want to have slides in my captivate movie that have a
clickbox where if the user does not click to continue after a
certain period of time the movie continues to the next slide. Any
thoughtson how to do that?

Question is duplicated. Original thread is
here

Versions and Auto-save

I am a very new user to macbook. I purchased this for academic study and the "versions" and "auto save" functions sound just what I want. But I have no clue about how to "turn this on" and see the old saved versions of my documents. Any advice or help would be great

Plenty of discussions about this - see under "More like this" on the right.
Basically it's always on (you can't turn it off) *BUT* you have to have applications that specifically support this (i.e. TextEdit, Pages & Numbers).
MS Office 2011 doesn;t yet support it (MS says it will later), 2008 probably never will
regards,
Shawn

How to disable Google auto-complete and instant search functions

Until the last week, I have been successfully using http://www.google.com/webhp?complete=0 to disable Google's insistence on forcing users' searches to use the infuriating auto-complete and Instant Search functions (the option to disable the former was removed by Google from Preferences while the latter doesn't retain the disabling in Preferences).
However, Google now seems to have beaten my first choice workaround.
Before I switch to one last possible workaround, I wondered if Firefox users knew of any others?
Failures so far are: *http://www.google.com/webhp?complete=0 *www.google.co.uk/firefox *https://encrypted.google.com/

You can use:
* http://www.google.com/webhp?complete=0
* https://www.google.com/webhp?complete=0
Those two do not show suggestions, but also do not have autocomplete=off in case you are remembering form data
*Tools > Options > Privacy > History: "Remember search and form history"

Auto-Accounting Functions And Function Transaction scenarios

Hello Experts,
Do somebody have the complete information about the the list of Auto-accounting functions triggered @ time of events or functions like costing, revenu , billing etc?
Example - Expense Report Cost Account is fired when you run PRC:Distribute expense report cost ? sure ?? or when entered i-Expense? It will be gr8 to have some detail understanding on Auto-Accounting fucntions and their cause of origin.
Provider Cost Reclass Credit Account / Provider Cost Reclass Debit Account - Origin??
Thanks

Hello Experts,
Do somebody have the complete information about the the list of Auto-accounting functions triggered @ time of events or functions like costing, revenu , billing etc?
Example - Expense Report Cost Account is fired when you run PRC:Distribute expense report cost ? sure ?? or when entered i-Expense? It will be gr8 to have some detail understanding on Auto-Accounting fucntions and their cause of origin.
Provider Cost Reclass Credit Account / Provider Cost Reclass Debit Account - Origin??
Thanks

Text - Auto Scroll Function

Does my iPad have an Auto Scroll for Safari?
Is there a "hidden" feature that I can use for reading a text with Safari?
An automatic scroll (activated by an command) would be a comfortable function.
I don´t want to use an App.
Thanks

Tap and slide up to scroll. Tap and flick up to move faster.
There is no way I know off to have the screen automatically scroll.
The iPad has many security features to prevent malware attacks. One of these is called Sandboxing. This keeps each app in its place and prevents apps from altering the system resources or other apps. So no other app will provide the auto scroll functionality to Safari.
You can make suggestions to Apple here:
http://www.apple.com/feedback/

Text-input component with auto-complete functionality for mobile

Hey guys,
I wonder if there is a text-input component with auto-complete functionality optimized for mobile development with AIR like the one that Android provides natively as you can see here http://developer.android.com/reference/android/widget/AutoCompleteTextView.html and here http://developer.android.com/resources/tutorials/views/hello-autocomplete.html.
At least I didn't find it in the latest SDK and I think such a component is pretty standard nowadays. Or did I simply overlook it?
Thank you guys for any advice.
Regards,
Thilo

Hi relaxtraja,
thanks for your reply!
I knew that there are a lot of auto-complete scripts on the web. What I was hoping was, that Adobe provides an officially supported auto-complete component optimized for mobile as part of the SDK (like in the Android SDK as I pointed out), but that doesn't seem to be the case. It's sad, because it's an essential part of modern UIs in mobile applications.
I've already created an auto-complete component by myself based on Spark components and I will end up using it. But I will have to optimize it for mobile applications beforehands. I just think something this essential should be provided by the SDK.
However, thanks for posting!
Regards,
Thilo

I have a site I do business with. They do not authorize passwords unless a dealer. I do no have on an auto save function, as I want to type my passwords in ea

I have a site I do business with. They do not authorize passwords unless you are a dealer. I do not have passwords on an auto save function, as I want to type my passwords in each time for security. My password for this site will only work a short WHILE, AND THEN it will not be recognized by the site and I cannot get in.
Then I must contact the company to reset or clear it manually on their end so it can be reset. They always give me the SAME SETUP PASSWORD to use. I use it, then I RESET PASSWORD on my end. The computer seems to remember my user NAME AT least on my computer as it comes up once I start typing the username in. They SAY IT is a settings issue on my end. I do not have this problem on any other site even THOSE WITH higher SECURITY. I need to FIX the issue OR may LOSE ACCESS To the site as is very aggravating for them and they say other have had the problem but usually with chrome but never constantly.I am not that computer literate ,but my husband is an IT Security professor and textbook writer but says doesn't really know Firefox. I do not really want to store passwords on computer as have been hacked several times. He and I do not understand some of the terms mentioned. since it is not a problem with other sites it should be fixable. Please me help using terms I or my husband can understand without having to give Firefox all my passwords. I would be happy to set up something different just for this one site if I need to but need easy instructions. Have cleared the cookies before but it still happens. What setting do I need to change or set to fix this? the other questions that come up seem very different and do not apply. FF 22 now but happened w other FF versions.

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

How can I continuously auto-save and auto-name the JPEG files with a controlled time interval

Hi,
I am newly involved in some Labview projects that out of my knowledge. I am trying to save multiple JPEG images from a live imaging task to a folder in the computer hard disk every certain minutes. I'd like to name these files with the date and time (eg. Img_06012011_1635. jpg).Then, after hours long image capturing, I can have all the image files in a neat order.
My goal is to have the jpg files auto saved and auto-named with the data and time at that moment. I also need to control this waiting time between each savings.
Could you please show me some hints about this? See the vi attached, I know I need to do something on the "write path" part on the up right corner. Thanks!
Solved!
Go to Solution.
Attachments:
capture.vi ‏28 KB

Thanks, Steve. When I built up a path with the date and time info and send them to the WriteJPEG File.vi like you mentioned, it stopped saving any files into the folder. Do you think this is the problem from my while loop?Could you show me if there is any other secret functions that restrains the file saving?
I am planning to save the image files every 30 secs,for example, and then I can have a bunch of jpg files with their unique names after hours long image acquisition.
I appreciate you kindly help!
Attachments:
capture(updated).vi ‏29 KB

N95 & Auto-Rotate Function in V21.0.016

Wife & I both have new N95's RM-159 from 3.
Firmware Version is V21.0.016 as mentioned in subject line.
What neither phone seems to have is the auto-rotate function. After hours of searcing I've been unbale to find out why with this version of the firmware this isn't supported on these phones. Under Display settings no mention of auto-rotate. I've checked software updater & am told the FW is the latest revision.
Do I need to install the accelerometer plugin to get this function to work as you have to do with rotateMe(c)Samir?
Any help would be appreciated before I ring 3 customer services and ask them why it isn't supported.
TIA.

Your phones are normal.
The N95 doesn't have that function as part of it's firmware. Only the N95 8GB has had this feature added in the v20 firmware.
The firmware on the N95 is not the same as the firmware on the N95 8GB.
It is rumoured that the feature will be in the next firmware release for the N95 which is due in the next few months.
So the only way to get auto rotate on the old N95 is to install a program like rotateme.

JS CS3 How can I find -and delete- anchored empty images frames

I have a script that works fine with text,
I need the same function, but find and remove anchored empty image frames
thx
var myDoc = app.activeDocument
for(var myCounter = myDoc.textFrames.length-1; myCounter>=0; myCounter--)
var myFrames = myDoc.textFrames[myCounter]
if (myDoc.textFrames[myCounter].contents == ""){
myDoc.textFrames[myCounter].remove()

I'd do it this way:
1. Grab the document's allPageItems.
2. Iterate over it, ignoring text frames.
3. Check to see: (a) if the parent is a character and (b) if the graphics collection of the page item is empty. If so, delete it.
Dave

Pop up window, and window.opener function using workshop?

hi,
pop up window, and window.opener function using workshop?
hi,
i am having two folders.
one folder having
abc.jpf file,
test1.jsp
second folder having
xyz.jpf
test2.jsp
i am using weblogic workshop8.1
i need to call test2.jsp as pop up window
from test1.jsp.
i need to pass value from test1.jsp to test2.jsp
again i need pass value from test2.jsp to test1.jap
normal jsp programming we can use window opener
javascipt function to do above.
same thing how to us in weblogic workshop?
any can help?
thanks,
jp reddy

Hi,
assuming action.do is the action method of ....../folder1/abc.jpf you can try out this in the test1.jsp,
function openNameHistory(url) {
var args = "<%= request.getContextPath() %>/folder1/"+url;
window.showModalDialog(args,'','dialogHeight:320px;dialogWidth:600px;scroll:yes;status:no');
<netui:anchor href="javascript:openNameHistory('action.do')">Name History</netui:anchor>
u need not specify the abc.jpf in the url because , workshop allows only one jpf per folder
hope this helps...
regards
shakan

Disable auto import function?

I want to disable the auto import function in iTunes, but can not find the setting.
My problem is I download a new song into a temp directory, immediately iTunes opens and imports the song into the iTunes library. I DO NOT want iTunes to import the song at this time. I want to move the song to my MP3 folder first.
This is a real pain because I have to first delete the song from iTunes then move the song file, then import the song again from the MP3 folder. If anyone knows a way around this please let me know.
Thanks!
na Windows XP
na Windows XP

Edit/preferences/import uncheck "show import dialog when..."
Charlie...
http://www.chocphoto.com

FlexConnect (aka H-REAP) and Auto-Anchor functionality

Similar Messages

Maybe you are looking for