FlexConnect support for AP 1600 an 2600?
Hi,
Does any body knows if the access point 1600 and 2600 support flexconnect mode?
thanks
Hello Alejandro,
As per your query i can suggest you the following solution-
Yes, the access-point 1600 and 2600 will support flex-connect.
You can refer the link to know how to configure flex-connect on these AP's
http://www.cisco.com/en/US/docs/wireless/controller/7.4/configuration/guides/flexconnect/config_flexconnect_chapter_01.html
Hope this will help you.
Similar Messages
-
Add support for SCXI-1600 in 64-bit Windows
Hello,
I recently discovered that the SCXI-1600 is not supported in 64-bit Windows. From what NI has told me, it is possible for the hardware to be supported, but NI has chosen not to create a device driver for it.
I'm a bit perplexed by this position, since I have become accustomed to my NI hardware just working. It's not like NI to just abandon support for a piece of hardware like this -- especially one that is still for sale on their website.
Please vote if you have an SCXI-1600 and might want to use it in a 64-bit OS at some time in the future.
Thanks,
Doug
Hi All. Just reading about the lack of support for the
SCXI-1600 and Windows 7 (64bit) It sounds like I am in the same boat as the
rest of you. I have 4 SCXI systems and IT head office is rolling out Windows 7
(64) across the board. (Worldwide). so now I have the choice of either
purchasing 4 new systems ($160K USD), Trying to just get the Windows 7 (32)
operating system (if possible) or start buying new hardware. Then I need to
justify why I am spending this money. Like you all, it has been just so easy to
use the NI stuff but when you are forced to upgrade and there is no support for
one party it does make our job so much harder. Yes I would like 64bit support
for the SCXI-1600 module. -
Truetone for nokia 1600 and 2600
can i put a truetone to my nokia 1600 and 2600??how?
The 1600 has not PC, Bluetooth or Infrared connectivity as far as I'm aware, so you cannot transfer files to/from other phones.
If the ringtone on the old phone was supplied with the phone, it may not be transferrable or downloadable anyway, because the standard tones are normally copy-protected and supplied exclusively with the phone. -
AVC support for 3500 Series AP on 5760 platform
Hi all,
The title says it all. According to the 5760 Configuring Application Visibility and Control guide only the following AP types are supported
Cisco Aironet 1600 Series Access Points
Cisco Aironet 2600 Series Wireless Access Points
Cisco Aironet 3600 Series Access Points
What about the 3500 Series? Is it not (yet) supported? They are still relatively new and AVC works on AireOS based WLCs.
Had not yet the chance to do a test myself, so I am asking here.
Regards,
PatrickHi Patrick,
Here is the latest AVC guide for 5760. Only addition was 3700 to the list of 1600,2600 & 3600.
http://www.cisco.com/en/US/customer/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/iosXE_3point3_AVC_DG.html
So no support for 3500.
I do not think Cisco will make it work as they want to discontinue 3500 series.
HTH
Rasika
**** Pls rate all useful responses **** -
I received the above error reinstalling SQL Server 2008. I have tried all suggestions. This error also appears when I install any version of SQL Server.
I have also installed;
Microsoft® .NET Framework Version 2.0.50727.4927
Microsoft® .NET Framework Version 4.0.31106.0
Microsoft® .NET Framework Version 3.0.6920.50
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052081
Exit facility code: 1212
Exit error code: 1935
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-23 19:17:20
End time: 2014-02-23 19:21:35
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: OHPC
Machine processor count: 2
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: H:\SQLServer2008R2_SP1\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: OHPC\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
SFC/ Scannow
2014-02-23 19:08:22, Info CSI 0000016f [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:08:22, Info CSI 00000170 [SR] Beginning Verify and Repair transaction
2014-02-23 19:08:23, Info CSI 00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:23, Info CSI 00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:08:26, Info CSI 00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:27, Info CSI 0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:08:27, Info CSI 00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 00000182 [SR] Verify complete
2014-02-23 19:12:33, Info CSI 00000326 [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:12:33, Info CSI 00000327 [SR] Beginning Verify and Repair transaction
2014-02-23 19:12:33, Info CSI 00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:12:35, Info CSI 0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:12:36, Info CSI 00000331 [SR] Verify complete
2014-02-23 19:13:14, Info CSI 0000035d [SR] Repairing 3 components
2014-02-23 19:13:14, Info CSI 0000035e [SR] Beginning Verify and Repair transaction
2014-02-23 19:13:14, Info CSI 00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:13:15, Info CSI 0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:13:15, Info CSI 0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:13:15, Info CSI 00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000377 [SR] Repair complete
2014-02-23 19:13:15, Info CSI 00000378 [SR] Committing transaction
2014-02-23 19:13:15, Info CSI 0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repairedSummary:
Attempted proposed solution. Error still appears.
This is installed:
Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
Microsoft Visual C++ 2005 Redistributable 8.0.56336
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
I reinstalled:
vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
Results:
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
Corporation. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
Reconfiguration success or error status: 0.
I installed SQLServer2008R2_SP1
Same error message came up;
SqlSupport_KatmaiRTM_Cpu64_1.log
MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
{837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files -- Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
Thanks, Ted U -
Support for C 'n' Q with CG-revision Athlon 64
Recently I bought a MSI K8T FSR motherboard and an Athlon 64 3000+, CG-revision. The new system is very stable and fast, the processor seems to be correctly identified, the only problem is Cool and Quiet isn't working.
I've installed clean copy's of Windows XP and Windows 2000, installed all latest software (corecenter etc), biosses and drivers, configured power management in Windows and enabled the feature in the bios, installed the special processor driver/software but still the clockspeed seems to be locked. The AMD cpuinfo tool and the msi corecenter both report a constant clockspeed of 2000 Mhz when run in Windows 2000 and a constant speed of 1600Mhz when run in XP. Heavy benchmarking or let the pc idling for 15 minutes, clockspeeds won't change. The constant 1600 Mhz reading in Xp is especially starnge, according the to AMD whitepaper this isn't a speedstepping for the processor, it should be switching between 1000/1800/2000Mhz. (see http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/30430.pdf , page 9, at column ADA3000AEP4AR)
In the release notes, it says support for the CG-revision of the processor is added in the last bios version, but C 'n' Q for Cg is still to come?
In a dutch forum, I'm not the only one encountering this problem, so I suspect it's not a standalone case.
The other hardware in my system, just for the reference: zalman 7000A cooler, nexus 3000 psu, 40 GB maxtor harddisk, geforce 2 MX, 512 MB PC3200 Kingston mem.Quote
Originally posted by IceOnFire
Ironic that we take so much effort in making our pc's slower :-). For me too the automatic clockdown was a major reason to buy the Athlon 64. The "special extentions" I referred to are the AMD processor driver (downloadable from amd.com)
That worked! I went to the AMD site you mentioned, more specifically, this page, and downloaded the last program on the bottom of the page. After a restart, vwaa-la! 800 MHz! Never thought I'd be so happy to see my new machine run slower than my old machine.
Anyway, it works now... thanks for the help ... hope you get yours working too. -
Revision: 1307
Author: [email protected]
Date: 2008-04-18 16:28:33 -0700 (Fri, 18 Apr 2008)
Log Message:
modules: added support for automatically adding "use namespace X", depending on the -target-player value
* similar to how we add "use namespace AS3"
* symmetric with ASC's -use feature, however we don't have equivalent commandline support yet
Bugs: n/a
QA: Nothing in particular, except for testing the new functionality of -target-player (email me about this)
Doc: Maybe: If we doc about "use namespace AS3" being added to all Flex compiles, we may want to talk about this.
Reviewers: Pete and Erik
Modified Paths:
flex/sdk/trunk/frameworks/flex-config.xml
flex/sdk/trunk/lib/asc.jar
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/BatchCompiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/Compiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/ScriptCompiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/Parser.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/ContextStatics.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/SymbolTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/MetaDataParser.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/Configuration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/DefaultsConfigurator.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleDef.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/TypeTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AtEmbed.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.javaThanks for your attention.
In the above logs, higher resolutions seems to be detected on both screens, hence my surprise :
[ 391.631] (II) intel(0): Printing probed modes for output LVDS1
[ 391.631] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 391.897] (II) intel(0): Printing probed modes for output HDMI1
[ 391.897] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
If it can help here is also my current xrandr output (after having called it manually to use the preferred resolution of each screen)
itanguy ~ $ xrandr
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 434mm x 270mm
1680x1050 59.9*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
If needed, I may reboot and provide xrandr output after boot (it will be 1024x768), or could other logs help you ? Please ask... -
WLC 5760 centralized mode Flexconnect support?
Hi all,
I am currently digging through the documentation about the 5760 WLC and converged access mode and found one particular information, which I need more clarification for.
This is the link
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps12598/qa_c67-726507.html
And here the specific snippet:
Q. What deployment modes can the Cisco 5760 WLC and Cisco Catalyst 3850 support?
A. The Cisco 5760 WLC can operate in centralized mode (also known as local mode) as well as converged access mode, whereas the Cisco Catalyst 3850 operates in converged access mode. At this time, there is no support for office-extend access points, indoor or outdoor mesh, or FlexConnect access points on the Cisco 5760 WLC and Cisco Catalyst 3850.
Now my questions are:
Does this apply to the converged access mode only or also centralized mode?
Do 5508/WiSM2 WLCs still support APs in the specified modes even when using the new mobility architecture?
When is it planned to add support for the new platforms, if at all?
Hoping for some answers!
Regards,
PatrickHi Patrick,
Why not post your question here;
https://supportforums.cisco.com/thread/2220448
There's an open forum Converged Access Q&A session on the go direct with Cisco...
Richard -
Patch to add support for asynchronous validators in ValidatorGroup
I have uploaded to the bug system a patch that modifies ValidatorGroup to support asynchronous validators, that is, validators that communicate with the server to give an answer.
Feel free to comment, I am not an expert, so...
https://bugs.adobe.com/jira/browse/CGM-45Hi All. Just reading about the lack of support for the
SCXI-1600 and Windows 7 (64bit) It sounds like I am in the same boat as the
rest of you. I have 4 SCXI systems and IT head office is rolling out Windows 7
(64) across the board. (Worldwide). so now I have the choice of either
purchasing 4 new systems ($160K USD), Trying to just get the Windows 7 (32)
operating system (if possible) or start buying new hardware. Then I need to
justify why I am spending this money. Like you all, it has been just so easy to
use the NI stuff but when you are forced to upgrade and there is no support for
one party it does make our job so much harder. Yes I would like 64bit support
for the SCXI-1600 module. -
OEAP602 - Support for APs behind NAT
Support for APs behind NAT
In the 7.2.103.0 release, you can deploy up to 3 OfficeExtend access points (OEAPs) behind a NAT device. You can deploy up to 50 FlexConnect access points (with or without Data DTLS) behind a NAT device.
Source: http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html
I'm confused, does it mean I can't have more than 3 OEAP602s deployed in the same remote site (let say, a Hotel) with the same Public IP back to my OEAP-WLC ?I know on 7.0 MR1 only supports 1. I learned that the hard way doing a meeting at a hotel for our staff.
One thing we did was hook up a switch to port 4 and did HREAP with 2 other aps.. Not ideal but I like to test limits ..
Sent from Cisco Technical Support iPhone App -
Please Add LTE Band 12 Support for better connection
I was deeply disappointed to find the recent 5.1.1 release of Android didn't include adding Band 12 support to the Z3C! The Sony representative I spoke to in March said the phone had the radio to be able to connect via Band 12 and just needed to be enabled in the software. Recently you enabled Band 12 for the Z3 (http://www.androidpolice.com/2015/06/03/t-mobile-updates-its-xperia-z3-to-lollipop-throws-in-band-12-lte-support-for-good-measure/) so you clearly have the software to do this already, please please please add it to the Z3C software!!! For anyone on T-mobile it will equate to a substantial improvement in signal availability and strength, and everything else you do is much less important than that! Thanks.
LTE band 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 13(700), 17(700), 20(800) - D5803 1(2100), 3(1800), 5(850), 7(2600), 8(900), 28(700), 40(2300) - D5833 Or check the white paper, it is NOT supported, it's not software but hardware related. http://www-support-downloads.sonymobile.com/d5803/whitepaper_EN_d5803_d5833_xperia_z3_compact.pdf NetworksD5803UMTS HSPA+ 850 (Band V), 900 (Band VIII), 1700 (Band IV),1900 (Band II), 2100 (Band I) MHzGSM GPRS/EDGE 850, 900, 1800, 1900 MHzLTE (Bands 1, 2, 3, 4, 5, 7, 8, 13, 17, 20)D5833UMTS HSPA+ 850 (Band V), 900 (Band VIII), 1900 (Band II),2100 (Band I) MHzGSM GPRS/EDGE 850, 900, 1800, 1900 MHzLTE (Bands 1, 3, 5, 7, 8, 28)TD LTE Band 40 The link you've posted it's related to the Xperia Z3 T-mobile variant. LTE band 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 13(700), 17(700), 20(800) - D6603 (this is the SIM free US version) 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 17(700), 20(800) - D6643 1(2100), 3(1800), 5(850), 7(2600), 8(900), 28(700), 40(2300) - D6653 2(1900), 4(1700/2100), 12(700) - D6616 This is the T-mobile variant
-
Lte support for lumia 1520 model in india
hi,
am planning to buy the lumia 1520 here in india.
What is the model number [ rm 937 or rm 938 or rm 939 or rm 940 ] of the model sold officially in india ?
does this model have support for 4g/lte networks, irrespective of the fact that carriers in india currently do not offer 4g/lte networks ?
is it true that even if the model has 4g/lte support, it is disabled for sale in india ?
Thanks in advance
Solved!
Go to Solution.Hi hardisk88,
Welcome to the Nokia Support Discussions!
The RM model compatible with India is RM-937. The phone supports LTE frequency bands, however your network provider should also support this service to enjoy LTE connections using your Lumia 1520 in India. Here's the supported LTE frequency bands: LTE bands: 2100, 1800, 2600, 900, 200.
Hope this helps. -
What IOS to get support for IGRP
Hi
Have an 2600 router, with IOS IOS (tm) C2600 Software (C2600-I-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
I do not have support for the IGRP prot?
How do i get support for that, any ideas about what IOS i have to download?Access the software advisor tool on CCO at the following link and choose the option 'Find software with the features I need' and select IGRP and to find images that support IGRP.
http://cisco.com/en/US/support/tsd_most_requested_tools.html
I don't know what's the model of the 2600 you have. IGRP on 2611 is supported in 12.2(11)T7 or earlier versions. It appears you may have to downgrade the code to 12.2 or earlier version to enable IGRP. But, check the software advisor tool to pick the right image.
BTW, is there any specific reason why you want to run IGRP. You can consider EIGRP, successor to IGRP, and there are lot of similarities between them.
HTH
Sundar -
Photoshop has detected graphics hardware that is not officially supported for 3d
From what I've read I thought 512 MB or vRAM would work with 3d. It used to anyhow. I get the pop up that says it's not officially supported for 3d, and has temporarily disabled 3d functionality.
I've tried setting the prefences under graphics processor settings to Basic, Normal, and Adavanced with no luck getting the 3d to work again. It was working fine before the last update to 13.1
I'm using a Mac Pro with 8 GB RAM, NVIDIA GeForce 8800 GT 512 MB, System 10.8.2
Using PS CS6 extended
Adobe Photoshop Version: 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00) x64
Operating System: Mac OS 10.8.2
System architecture: Intel CPU Family:6, Model:23, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 8
Processor speed: 3200 MHz
Built-in memory: 8192 MB
Free memory: 4618 MB
Memory available to Photoshop: 7318 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Unavailable
OpenGL Version: 2.1
Video Rect Texture Size: 8192
OpenGL Memory: 444 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce 8800 GT OpenGL Engine
Display: 2
Display Depth: 32
Display Bounds: top=0, left=-2560, bottom=1600, right=0
Video Renderer ID: 16918024
Video Card Memory: 512 MB
Display: 1
Main Display
Display Depth: 32
Display Bounds: top=0, left=0, bottom=1600, right=2560
Video Renderer ID: 16918024
Video Card Memory: 512 MB
Serial number: Tryout Version
Application folder: /Applications/Adobe Photoshop CS6/
Photoshop scratch has async I/O enabled
Scratch volume(s):
Maczilla HD, 278.4G, 107.7G free
Required Plug-ins folder: /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Required/
Primary Plug-ins folder: /Applications/Adobe Photoshop CS6/Plug-ins/
Additional Plug-ins folder: not set
Anyone have any ideas, or maybe I'm missing something. Nothing like getting an update and it busting what used to work. Dang!I can get into the 3d pref area, but not the pull down menu area at all. It's grey'd out now that I did the update.
I just find it weird that the card is on the approved list, and meets the requirments and used to work. But yeah this mac is a few years old at this point. I'm just hoping that someone at Adobe reads this and can shed some light. I'm hoping maybe there's a button I need to click on, or something cheaper then buying an entire new computer when I really don't think I need to. Photoshop has really bloated up! -
LTE Band 12 Support for better connection
I was deeply disappointed to find the recent 5.1.1 release of Android didn't include adding Band 12 support to the Z3C! The Sony representative I spoke to in March said the phone had the radio to be able to connect via Band 12 and just needed to be enabled in the software. Recently they enabled Band 12 for the Z3 (http://www.androidpolice.com/2015/06/03/t-mobile-updates-its-xperia-z3-to-lollipop-throws-in-band-12-lte-support-for-good-measure/) so they clearly have the software to do this already, anyone know if they're going to add it to the Z3C? For anyone on T-mobile it will equate to a substantial improvement in signal availability and strength (further reach, better building penetration), and everything else you do is much less important than that! I'd definitely have prioritized this over LinkedIn integration... Anyone else agree? Heard if/when band 12 will be added? If you have more information or just want want to note that you want this too please respond.
LTE band 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 13(700), 17(700), 20(800) - D5803 1(2100), 3(1800), 5(850), 7(2600), 8(900), 28(700), 40(2300) - D5833 Or check the white paper, it is NOT supported, it's not software but hardware related. http://www-support-downloads.sonymobile.com/d5803/whitepaper_EN_d5803_d5833_xperia_z3_compact.pdf NetworksD5803UMTS HSPA+ 850 (Band V), 900 (Band VIII), 1700 (Band IV),1900 (Band II), 2100 (Band I) MHzGSM GPRS/EDGE 850, 900, 1800, 1900 MHzLTE (Bands 1, 2, 3, 4, 5, 7, 8, 13, 17, 20)D5833UMTS HSPA+ 850 (Band V), 900 (Band VIII), 1900 (Band II),2100 (Band I) MHzGSM GPRS/EDGE 850, 900, 1800, 1900 MHzLTE (Bands 1, 3, 5, 7, 8, 28)TD LTE Band 40 The link you've posted it's related to the Xperia Z3 T-mobile variant. LTE band 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 13(700), 17(700), 20(800) - D6603 (this is the SIM free US version) 1(2100), 2(1900), 3(1800), 4(1700/2100), 5(850), 7(2600), 8(900), 17(700), 20(800) - D6643 1(2100), 3(1800), 5(850), 7(2600), 8(900), 28(700), 40(2300) - D6653 2(1900), 4(1700/2100), 12(700) - D6616 This is the T-mobile variant
Maybe you are looking for
-
After updating my iPhone 6 to 8.1.1 the suggestion bar across the top of the keyboard is no longer there. How do I get it back? I had it before the update and loved using it. Thanks
-
I just want to know that how to change the font color, font size, and forgr
i just want to know that how to change the font color, font size, and forground color in JTextPane for the Selected text. i try diffrerent menthod like setFont and setColor, these methods change the fonts of the whole textpane. so please reply me as
-
Will there performance improvement over separate tables vs single table with multiple partitions?
Will there performance improvement over separate tables vs single table with multiple partitions? Is advisable to have separate tables than having a single big table with partitions? Can we expect same performance having single big table with partiti
-
Having trouble importing .MOV files
I have a Canon EOS 60D which shoots video clips with a file extension of .MOV. I have Premier Elements Vers.8.0 and when I try to import the clips, it errors out and says it doesn't support .MOV files or Codec is missing...I'm not even sure what tha
-
Bonjour, tout les gens. Here's the solution. I've experienced the problems myself and I've solved them myself. I hope it also works for all you out there having problems with the most recent grand update. :!: The update I wrote this how-to for was th