Flexible width won't work at all. Windows 8 issue?

Hello,
Few months ago I've been playing with Muse on trial version on Win7 and everything was just fine.
Recently I bought Win8 and subscribed CC.
I just wanted to create some sites now, but can't even start.
The flexible browser width thing doesn't work at all.
Rectangles/textures don't stretch to the full width of the browser after doing Previews.
They just end up with the site content area...
And yes I have watched the tutorial below and I'm sure I did it correctly (many times)
But it just won't work on my computer/system.
http://tv.adobe.com/watch/muse-feature-tour/muse-design-for-flexible-browser-width/
Uninstalling and reinstalling Adobe Muse doesn't fix the problem.
Anybody with similar problem? Can it be a Win8 issue?
Please help
Regards,
AS

I can't understand why it's done this. After all, I'm always signed in as an administrator...
The main theory is that something has gone wrong with an access control list (ACL) either on some registry key or a file or folder. (Or possibly that there is a "deny" of some sort associated with a key, file or folder ACL.) Because permissions get applied on a file-by-file, folder-by-folder, key-by-key basis (roughly speaking), even if you're an administrator your particular user account account may still lack permissions on one or some of those items. When we do the "run as administrator" thing, that gets us back the missing permissions.
(I'm not sure of the fine details of the mechanism for granting explicit administrative rights via "run as administrator", but I figure I'm probably going to have to do some study on that pretty soon, given the efficacy of the "run as administrator" workaround in some of these user-specific QuickTime launch failures. A good metaphor for my current situation is that I know how to apply a bandage to a wound correctly in order to help wounds heal more quickly ... but I don't know precisely why applying the bandage makes the wound heal more quickly.)
The only problem there is that every time it runs now, I get asked if the program can make modifications to my PC!
That's interesting ... is it the same sort of message that you get from your User Account Control when you install new software?

Similar Messages

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify you have sufficient privileges to start system services. Now, iTunes won't work at all.

11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. Now, iTunes won't work at all.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

After installing Maverick my computer, when restarted, only a gray screen appeared. My computer won't work at all...what happened?

After installing Maverick my computer shut down and when it restarted I couldn't get to the home screen. The monitor was grey with some dark grey shapes, it sounded like it was constantly running a program. My computer is sick!! HELP

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

Well, yes, data does get corrupted sometimes.
The trick is finding what data.
By 'cleaned' are you therefor meaning that the drive has been erased and the system re-installed?
Because that's the quickest way to deal with such a situation.
Back up the system first of course,
Add back 3rd party apps one at a time in case one of them is causing the problem.

Which motherboard is the best for p4 and works with all windows fro

dear all
iam looking for a good motherboard for p4 processor but i have used gigabyte but with windows 98 it keeps freezing the system
so could some body give me an advise to a better motherboard to work with all windows (98 to xp)
thank you

Hi sha6sho6,
I dun really know if it will have mini errors with 98 as I didn't install any 98 on my system, but this board works perfectly fine with my 2000. 2000 is a more complex platform than 98 as it supports more than Windows with NT in it.
If it works well with my 2000 platform, then I think 98 shouldn't be a prob .
All the Best... :D!!!

The tools on Adobe Photoshop Elements 9 seemed to have frozen. The crop symbol is 3 of the symbols nest to each other. The hand move tool is not one hand but 3 next to each other. Other tools won't work at all. Really nice!

Ya, okay ! I use a number of PSE programs, one of which is PSE 9. The tools for some reason seem to have frozen. When I use the move tool I don't get just one hand but 3 hand symbols all next to each other. Same thing with the crop tool, I don't get one symbol but 3 all next to each other. There are a couple of tools that just don't work at all. It's like the PSE 9 got hit with some virus or sorts. Oh well, live and learn. Trying to get through to tech service is next to impossible.

Have you seen this other thread you started about this problem?
Photoshop Elements 9 is messed up.
Did you use Barbara's fix?
It would be less confusing if you only posted this question once, not three times:
HOW DO I RESET ALL THE TOOLS IN PSE 9 ? THE CURSOR IS REALLY MESSED UP AND DOES NOT WORK WITH THE TOOLS. I TOUCH THE HAND AND I GET 3 HANDS, I TRY TO USE THE CROP AND I GET 3 SMALL CIRCLES. THE CURSOR IS REALLY MESSED UP. DO I HAVE TO GET ANOTHER PSE 9 ?
Photoshop Elements 9 is messed up.
The tools on Adobe Photoshop Elements 9 seemed to have frozen. The crop symbol is 3 of the symbols nest to each other. The hand move tool is not one hand but 3 next to each other. Other tools won't work at all. Really nice!

Color replacement tool won't work at all

Hi, I am using photoshop CS3 in 10.6.2. The color replacement tool is not a tool I have much experience with, but am wondering why it won't work at all. I have reset the tool to its default preferences and tried using it on multiple documents and with different users and it just won't work. Nothing happens at all. I have watched some tutorials on using the tool and it looks easy enough and quite straight forward to use. I have tried every setting for the tool and still nothing happens. I am working on the top layer and have not selected anything. I have tried merging all the layers onto one layer incase the tool wasn't working because it would only replace the color of what is on a layer.
Thanks for your help.

The mode is color. The sampling is continuous and the limits are contiguous. These are the default settings for the tool.
I am noticing that the tool does work a little. I created a new document with 3 layers. The bottom layer is a white background. The middle layer has a blue square on it and the top layer is blank.
I notice that the color replacement tool won't work on the white background layer or the top blank layer, but only works on the middle layer. Does the tool only work on the same layer that has a color you are trying to replace?
When I hit the command option shift E keys to merge the layers into a copy, the tool only worked on the part of that layer that had the rectangle drawn on it and ignored the white part of the image.

Photoshop won't work in stupid windows 8:1

I really need my photoshop but it won't work properly in windows 8:1, it keeps freezing or hides half the image? can anyone help?

Have you asked for advice in that forum? Photoshop General Discussion

Sync with .mac never seemed to work great, now won't work at all

sync never seemed to work that well for me, now it won't work at all. I get the following message now:
.Mac Sync Error
A failure occurred while synchronizing the .Mac Sync Client.
I've tried reseting all the .mac stuff, but nothing seems to work now. Its pretty frustrating. Plus, while mac support in the store and over the phone is superb, .mac support online is a joke. Doesn't anyone have any suggestions?

With the exception of a framework reset, iSync no longer has anything to do with .Mac synchronization, which is instead handled exclusively by .Mac Sync.
I would start with a search of this forum for the error messages you describe:
http://discussions.apple.com/forum.jspa?forumID=957
Some of the same users who answer questions here regarding iSync, also do that there for users of .Mac Sync.

Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

The screen repair was botched. Take iPhone back to place of screen repair, and have them get the home button working again.

Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
so there's a faulty component or connection
from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look

I can call and text normally but my 3g won't work at all.

I'm using an iPhone 4S and although I can call and text normally, my phone's 3G won't work at all. My wifi sometimes also gets those little errors too from time to time. Is it possible to have that kind of problem in the iPhone 4S?

You need to restore your iPad using recovery mode and the process is covered in this article.
iPad: Unable to update or restore.
http://support.apple.com/kb/ht4097

HT201269 My Iphone 4 is water damaged and won't work at all so I've bought a new Iphone 5c - can I get my messages and whats app chats from my old to my new phone - they have different sized sims?

My Iphone 4 is water damaged and won't work at all so I've bought a new Iphone 5c - can I get my messages and whats app chats from my old to my new phone - they have different sized sims?

There is nothing saved on the SIm card in an iphone. If you have a backup of the old phone restore that to the new phone

Front Row won't work at all

Before the latest update of "Keychain and Login" my Front Row app would work partially
with blanking out in the slideshows and movies, However now it won't work at all.
Is there a fix in the works for this problem?
Dave

Figured it out...
The "Front Row" settings were set for a screensaver, That's why the monitor kept blanking out,
I've turned off the screensaver in the settings and "Front Row" works fine now.
There is no screensaver image chosen, That's why the screen kept going blank or even off.
Dave

Flexible width won't work at all. Windows 8 issue?

Similar Messages

Maybe you are looking for