FlexPMD and FB 4.7, no results

Just installed FB 4.7 on mac OS X (10.8). Downloaded eclipse plugins and set up commandline paths.
FlexPMD shows as flexpmd.running, but no results show.
FlexCPD runs and returns results as expected.
Any pointers? Does 1.2 still require all paths to be without spaces?

Sorry that didn’t help. After looking at the FlexPMD forum some more (since I made the post you saw), I now believe that the admin/permissions change is just a symptom/work-around for the ‘real’ issue: a problem with Java not being able to write to ‘temporary’ folder(s). But please note that I haven’t confirmed that belief yet, on my own machine, so it is an unverified assumption! If you want to pursue that idea, I’d suggest trying the suggestion of “nephi.wright” (Post #8, Feb 16, 2012) et al., at this FlexPMD forum URL: http://forums.adobe.com/thread/765512?tstart=0  (Note: if you’re on OSX, the actual path string to enter is going to be quite different—hopefully you know what the OSX equivalent would be…)
Good luck,
Jim

Similar Messages

  • TS1702 i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

    i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

    The users guide says:
    Spotlight searches the following:
    Contacts—All content
    Apps—Titles
    Music—Names of songs, artists, and albums, and the titles of podcasts and videos
    Podcasts—Titles
    Videos—Titles
    Audiobooks—Titles
    Notes—Text of notes
    Calendar (Events)—Event titles, invitees, locations, and notes
    Mail—To, From, and Subject fields of all accounts (the text of messages isn’t searched)
    Reminders—Titles
    Messages—Names and text of messages
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsynce all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • "select count(*)" and "select single *" returns different result

    Good day!
    product version SAP ECC 6.0
    oracle10
    data transfers from external oracle db into customer tables using direct oracle db link
    sometimes I get case with different results from 2 statements
    *mytable has 10 rows
    *1st statement
    data: cnt type I value 0.
    select count( * ) into cnt from mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
    *cnt returns 10 - correct
    *2nd statement
    select single * from  mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
    *sy-dbcnt returns 0
    *sy-subrc returns 4 - incorrect, 10 rows are "invisible"
    but
    1. se16 shows correct row number
    2. I update just one row from "invisible" rows using se16 and 2nd statement returns correct result after that
    can not understand why
    thank you in advance.

    Thank you, Vishal
    but,
    general problem is that
    1. both statements have the same WHERE conditions
    2. 1st return resultset with data (sy-dbcnt=10), 2nd return empty dataset, but must return 1 in sy-dbcnt
    Yes, different meaning, you are right, but must 2nd must return 1, because of "select single *" construction, not 0.
    Dataset to process is the same, WHERE conditions are equal...
    I think the problem is that how ABAP interperets select count(*) and "select single *".
    Maybe "select count (*)" scans only PK from index page(s)? and "select single *" scans data pages? and something is wrong with that?
    I'm new in SAP and didn't find any SAP tool to trace dump of data and indexes pages with Native SQL.
    se16 shows all records.
    And why after simple manual update of just one record using se16 "select single *" returns 1?
    I've just marked one row to update, didn't change any data, then pressed "save".

  • I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won't launch apps. When asked say "launch Facebook" Siri responds with "it doesn't look like you have an app named Facebook" and I get the same results when trying to launch any

    I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won’t launch apps. When asked say “launch Facebook” Siri responds with “it doesn’t look like you have an app named Facebook” and I get the same results when trying to launch any app. Siri works for everything else it just won’t launch apps. Any ideas? Thanks.

    I have this same problem... Seems like nobody else does. Siri won't launch any apps for me, including native apps.

  • Issues with iCloud synchronisation and contacts over two or more devices.  iTouch and iPad2 sync with different results from iMac.  Thoughts?

    Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....

    To follow-up with this issue:
    I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
    I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
    I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
    Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
    Ian

  • TS3103 All of a sudden can't receive email on Mail client.  Sessions with service provider (Att/yahoo) and Apple have yielded no results!

    All of a sudden can't receive email on Mail client.  Sessions with service provider (att/yahoo) and Apple have yielded no results!  Recently upgraded to Lion, but have received email since.  Anyone having the same problem.  Apple says service provider problem, service provider say it's the mail client.  Anyone had this problem???

    No.  My frustration with the problem just led me to begin the process convert all my email to a gmail client.  However, after some time all my mail with att/yahoo has been coming through as before.  Go figure.  Still will convert to gmail.

  • Wenn I've made changes on my private home-page and want to see the result, how do I get my Mac to load the new side instead of the "old" one?

    When I've worked on my private home-page and want to controll the results, how do I get my Mac to take the new version instead of the old one? I tried cmd R without any change! Who knows? Nina

    Try clearing the cache - command-option-e in Safari.

  • I buy new iPhone5s befor 11day but. Now don't work    I tried restore but same result I went to the nearest repairer and replace the battery and the charging port and the monitor but same result, I failed, said mother Bord (Raja solution)

    I buy new iPhone5s befor 11day but. Now don't work    I tried restore but same result I went to the nearest repairer and replace the battery and the charging port and the monitor but same result, I failed, said mother Bord (Raja solution)

    If you bought the iPhone from an authorized store/vendor, you should have taken the iPhone to them or any other Apple Store for evaluation under warranty.
    Once it has been opened by non-Apple entity, Apple will not do anything for this.

  • HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • I am unable to make or receive calls after the 6.1 update.  I have restarted, restored and reprogrammed without any positive results.

    I am unable to make or receive calls since I completed the 6.1 Apple update.  I have restarted, restored and reprogrammed without any positive results.  I hope that someone can assist me.
    Thank you in advance!  I appreciate your help!

    Thank you!  I went to the Verizon Wireless Store and everything is okay with regard to my carrier.

  • Minimum on rows  and sums/ Summation on overral result required

    Dear All,
    If I have three shipments with three line items then I want to see the minimum for each key figure (in this case distance). This is becasue each shipment will not have an overall sum, but a number of shipments will have an overall total
    I am trying to achieve the following result:
    Shipment     Item                Distance
    1001           10                    3 miles
    1001           20                    3 miles
    1001           subtotal            3 miles (both items go to same customer)
    1002           10                    5 miles
    1002           subtotal            5 miles
    Overall result                        8 miles (this is the total distance)
    I am currently using exception aggregation (set to minimum on item) and this produces the following results:
    Shipment     Item                Distance
    1001           10                    3 miles
    1001           20                    3 miles
    1001           subtotal            3 miles
    1002           10                    5 miles
    1002           subtotal            5 miles
    Overall result                        3 miles
    This means that the overall result is wrong in the second case (I have tried playing with the aggregation by shipment number - but this was not successful).
    Would be really grateful if somebody could give me some ideas with this one,
    Thanks,
    Ron

    Since you didn’t upload your excel file, I’m not quite sure what’s your source data looks like.
    I don’t think this issue is caused by your formula, but I guess you really need use number 3 instead of 103 in your SUBTOTAL formula.
    Anyway, please try below possible solutions for this issue.
    1. Set up your formula firstly, then filter data. Rather than the other way around.
    2. Select the filter range before filter. Or use advanced filter(except  the row which including your  formula)
    3. Copy the formula to the next row, then delete the pervious formula row.
    If it didn’t bring any joy. It’ll be better if you can share your workbook with us.

  • How can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

    how can i do with labview program,when i have   20 different values,and 1 want to add it with constant value.and how to get the results?

    Why do the 20 values have to be different? The same code should work even if some are equal.
    What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
    What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
    LabVIEW Champion . Do more with less code and in less time .

  • HT3204 Having purchased a Bluray of Les Mis with a digital download, I am unable to download the film through iTunes with each time I try it stops at 1.43GBytes.  I have attempted both Win8 PC and iPad with the same result.  Any ideas?

    Having purchased a Bluray of Les Mis with a digital download, I am unable to download the film through iTunes with each time I try it stops at 1.43GBytes.  I have attempted both Win8 PC and iPad with the same result.  Any ideas?

    Hello there, TindyBobbin.
    Just to make sure, here is a Knowledge Base article that reviews the process for downloading a digital copy:
    Transferring or downloading an iTunes Digital Copy
    http://support.apple.com/kb/ht1539
    If all of the steps still do not help with the download, you may want to follow what is mentioned at the bottom of all instructions:
    If you are experiencing issues downloading your iTunes Digital Copy, please contact iTunes Store Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Inspect and Inspected field in Record Results:Characteristic overview

    hi,
          Can any one explain me the Inspect and Inspected field in Record Results:Characteristic overview screen. How the sample size is determined in Inspected field during lot creation.
    Muthamil

    Dear Muthamil
    This fully depends on the sampling procedure you choose. for eg if you choose 100% sampling procedure and you have lot quantity of 10 items
    Then inspect will be 10 and inspected will be 10.
    SAP gives the definition for INSPECT as  - Predefined sample size that has to be inspected for an inspection characteristic or a partial sample.
    For each inspection plan characteristic you define the amount by which the inspected sample size in the 'Insp.ed' field can deviate from the to-be-inspected sample size in the 'Inspect' field. If a characteristic (partial sample ) is closed the system checks whether the required sample size is adhered to. The characteristic (partial sample) can only be closed if this is the case.
    But for Scope not fixed, larger , smaller scope the inspected field chages based on the result recording
    SAP gives the definition for INSPECTED as   - Number of sample units that have been inspected for a characteristic or a partial sample.
    Hope this explains
    Regards
    Gajesh

  • Ipod touch will not restore, only gives the apple logo...i have tried every trouble shot i can.. and keep getting the sme results.

    ipod touch will not restore, only gives the apple logo....i have tried every trouble shot... and keep getting the same results.

    Maybe here:
    http://www.windowserrorhelps.com/itunes-error-11-how-can-i-fix-itunes-error-11-i nstantly
    Is the iPod jailbroken?

Maybe you are looking for