Flicker free screen / IFrames issue

Hi all!
We're using WAS 6.40 and NWDS 2.08 to build web dynpro applications. We want to use iFrames in order to show some BW reports, and this works nicely except for one detail (important one though). The iFrames reload on every single action made in the application, and we're looking for a solution for this. Apparantly, since SAP made the decision to go for Server Side Rendering, this seems to be an effect, because when we used the sneak preview (2.0.2 or something similar) all worked fine!
Does anyone know of a solution to this matter. As we present the WD apps in our EP 6.0 I guess we could construct pages with one WD iView and one Portal iView (showing the report/web page) but this wouldn't look as integrated and nice.
B.R
Andreas

Bad news Andreas -- it is a known issue with no resolution up to date (or up to the most resent SP10)
Search these forum and you'll see that this question arise for several times.
Also problem is described here /people/jochen.guertler/blog/2004/11/12/web-dynpro-best-practices-how-to-combine-your-web-dynpro-application-with-existing-non-web-dynpro-content
The only workaround is to place report outside WD Component and use 2 portal iViews to display WD content & BW report separately.
VS

Similar Messages

Screen Tearing Issues

As of today, my Mac Mini has experienced severe screen tearing issues, it generally happens on Chrome but has started to also happen on other applications such as Pages. My Mac Mini is virtually brand new and has been used for about 2 weeks. I am using an TV via an HDMI cable. It is the 2.3ghz model with 4gb RAM. The OS is Mavericks. I have tried restarting but that didn't help. Plus the Mac is now hot with very little apps open (Minecraft, Chrome (1tab)) and the fan is loud.

Doesn't sound good... You have 90 days free phone support and a one year warranty on your Mac Mini.
I would Contact Apple Support or the Apple Store where you made the purchased and have it checked out.
Additionally you might wat to get AppleCare, which extends the phone support and warranty to three full years.

Internet Explorer (6 and 7) screen refresh issue

Hi,
I am using Internet Explorer 6 with BI7. When performing any action with a web template displayed within IE6, a blank screen is temporarily shown between performing the action and the screen been re-drawn. For example, swapping characteristics. Or selecting the push-button 'Print Version'. This also happen with IE7 (installed on a test PC).
This behaviour does not happen with Firefox (also installed on a test PC) - Firefox smoothly replaces the current screen with the new navigation state.
Any ideas? Is there a setting in either IE or WAD to stop this happening? Or is this just one of those IE 'features' that have to be accepted? It is not a good user experience.
Thanks,
David
PS don't bother advising that Firefox should be always used - regretfully, that's just not going to happen at this site.
PPS - just tested with IE8 and that works fine, just like Firefox. But that' not going to be installed here for a very long time.....
Edited by: Dave Grundy on Feb 23, 2009 3:25 PM

Hi Dave,
Each time an action is performed in a web report, the whole page needs to be rendered. This is not different in Firefox or IE6, 7 or 8. The difference is how this rendering of the whole page is handled with the different browsers (or versions).
From an SAP point of view the functionality you are looking for is called 'flicker-free rendering'. This infrastructure makes it possible to refresh parts of an HTML-page without rendering the whole page. According to the functional
enhancement schedule the functionality is included in enhancement package 1. Please have a look at the Enhancement Schedule to find this information:
http://service.sap.com/bi
-> Functional Enhancements Schedule BI in NW 7.0 (2004s)

U430 Touch Screen Hinge Issue

Hi,
I have U430 Touch Screen Hinge issue, but lenovo service agents are not responding even if I give them the reference of below forum. Can you please help me resolve this issue as the laptop is under warranty (bought on december 2014)and it was not damaged. It was used last night and then just closed and kept on the bed. When I returned and tried opening it, I had this hinge issue. Please help me get this issue resolve at once.
https://forums.lenovo.com/t5/Lenovo-U-and-S-Series-Notebooks/U430-Touch-Screen-Hinge/td-p/1809492/highlight/false
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Hi, This is the third time I called them but they are persistent that it is not cover under warranty for U430T. I do understand that if it is an accidental damage then it will not be covered. But my point is, from my end, there was no damage on the laptop and simply closed it and tried opening it after a while caused it. Furthermore refering to the post link, it is mentioned by Amy Tuper that if it is under warranty and cause is not by damage contact support. It is also mentioned that Lenovo launched an investigation in which it was concluded that there was mount failure on this model. So, my question is, isn't there a possibility that this defect could have been the mount failure issue ? Last call, they state that it is just for U530T even when the post says it is for both U430T and U530T. People on the same post have posted that they got it repaired by Lenovo for free. I am not sure what to believe, the post posted by Lenovo or the support service ? Can you please escalate the issue as it is hampering my day to day work. Awaiting reply from your end.

TS3232 I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have screen flickering issues

I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have massive screen flickering issues on a Mac Mini 2012.
I am using a Dell 30" monitor (it's the Samsung screen just rebranded) connected to a WD 4TB Thunderbolt drive connected to the Mac Mini.
The screen is usable for the most part when I've just started the computer (although today I started having issues after a fresh restart) but if even just the screen goes to sleep, or the computer goes to sleep and I wake it later, I start to have massive flickering to black and occasionally to snow.
The effect seems to be more likely to arise when I'm on heavy graphics-intensive websites or programs (eg, Tumblr feed with lots of GIF images or working in Adobe Premiere), but once it starts shutting down those programs has no effect, the screen keeps flickering wildly.
The problem improved after the 1.03 firmware upgrade (for a while it was flickering uncontrollably ALL the time and was virtually unusable) but it has not gone away.
Any suggestions would be very welcome, either for how to fix this issue or how to get Apple to, you know, let me TELL THEM that their adapter firmware fix has NOT solved the issue, since my phone support has expired. :/

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. This may be a separate issue, so I'll also post it standalone...

Mac Pro Screen Freezing Issue with NVIDIA 8800 GT too

There were lots of entry in threads, where the screen freezing issue was described (disorted screen with strange lines, only reboot helps). Nearly all cases seem to be related to the ATI 2600 card.
http://discussions.apple.com/thread.jspa?threadID=1358062&tstart=30
http://discussions.apple.com/thread.jspa?threadID=1365277&tstart=0
I opened this new thread to show, that this problems occurs not only for the ATI card but for the NVIDIA 8800 card, too.
My MacPro was delivered 8 days ago and was running without any problems. But all of a sudden, I got that screen freeze. And it wasn't the first time, I was heavely working 2-3 hours with that computer.
In total, 2 screen freezes showed on my computer. The first one during working with the computer. The second one during booting into MacOS X. The screen freeze occured during the boot phase with the grey screen and the spinning wheel.
My configuration:
MacPro 2.8, Dual Quad Core
6 GB RAM
3 harddisks, 1 standard from Apple, 2 Samsung with 750GB
MacOS 10.5.2
Formac 20" Monitor
Perhaps others have this problem, too? Than we should emphasize, that this is not an ATI related problem.

I've actually been having the freezing issue for a while now but I didn't have the know-how to troubleshoot it (PC tech trying to support the only Mac lab in the building).
MacPro will freeze randomly (no trend in time, system strain, or open programs). The mouse will operate but will not interact with anything.
Specs:
MacPro - Model 1,1
Dual Core Xeon 2.66
2gb RAM
nVidia GeForce 7300 GT
Mac OS 10.4.11
The machine always has 2 displays connected to it so the workaround that was discussed for the ATI 2600 doesn't apply. I had 1 display connected here in my shop and it froze for that as well.
Message was edited by: DocturKnowles

How to fix iframe issue that displays XML values instead of formatted XML in IE11

The following sub.jsp file shows the formatted XML properly as expected when is opened directly:
<% response.setContentType("text/xml"); %>
<book>
<chapter1>chapter 1</chapter1>
<chapter2>chapter 2</chapter2>
</book>
IE11 shows the result as below which are colored and can be collapsed or un-collapsed:
<book><chapter1>chapter 1</chapter1><chapter2>chapter 2</chapter2></book>
But if the sub.jsp is opened in an iframe from the below main.html, it only shows the values of the XML in the iframe:
<!DOCTYPE html>
<html>
<head>
<meta charset="ISO-8859-1">
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
<iframe src="sub.jsp"></iframe>
</body>
</html>
The iframe shows only the XML values, i.e., chapter 1 chapter 2 in IE11. This issue does not happen in IE8.
I appreciate to your if you know how to address this issue.
Regards, Amir

The following sub.jsp file shows the formatted XML properly as expected when is opened directly:
<% response.setContentType("text/xml"); %>
<book>
<chapter1>chapter 1</chapter1>
<chapter2>chapter 2</chapter2>
</book>
IE11 shows the result as below which are colored and can be collapsed or un-collapsed:
<book><chapter1>chapter 1</chapter1><chapter2>chapter 2</chapter2></book>
But if the sub.jsp is opened in an iframe from the below main.html, it only shows the values of the XML in the iframe:
<!DOCTYPE html>
<html>
<head>
<meta charset="ISO-8859-1">
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
<iframe src="sub.jsp"></iframe>
</body>
</html>
The iframe shows only the XML values, i.e., chapter 1 chapter 2 in IE11. This issue does not happen in IE8.
I appreciate to your if you know how to address this issue.
This issue is also posted at below link:
https://social.msdn.microsoft.com/Forums/en-US/5b0692b4-d312-4797-9089-42c1029ac059/how-to-fix-iframe-issue-that-displays-xml-values-instead-of-formatted-xml-in-ie11?forum=iewebdevelopment
Regards, Amir

Flicker free page updates with JSF?

My JSF app is running but there's flicker when I click the update button to get my search results. I basically forward my page to its self in the faces config file, so I figured this would happen.
<navigation-rule>
   <from-view-id>/Inputname.jsp</from-view-id>
    <navigation-case>
     <from-outcome>greeting</from-outcome>
     <to-view-id>/Inputname.jsp</to-view-id>
   </navigation-case>
</navigation-rule>ICEsoft offers extensions to solve this by using AJAX, is that the only way to achieve flicker free operation?

Hi,
I'm doing that using the same config and it works fine.
Ajax is a brand new solution. MyFaces provides tag to use it easily.
Greads,
Sebastien Degardin.

Any Fix / Update For Microsoft Office 2013 Free/Busy Information Issue

Any official update / fix regarding the Microsoft Office 2013 Free/Busy Information Issue? (not the workaround I found to uninstall KB2837618
and re-create profile).
Reference: http://helpdesk.missouristate.edu/news/two-microsoft-updates-cause-problems-with-outlook-2013
Thanks a lot,
Moshe

Refer to the solution which delivery by Hypocrit from another thread with the same topic.
http://social.technet.microsoft.com/Forums/en-US/827a12f0-c785-43df-a71f-0b21aeffa176/outlook-2013-freebusy-fails-after-updates?forum=officeitpro
I've copied the replies below:
"With mfcmapi open your Profile under the Profile->Show Profile
then double-click "Outlook" or how your Profile is named
then double-click "Microsoft Exchange"
then double-click your mailaddress (both) and remove PR_DELETED_FOLDERCOUNT with value SMTP: or correct them"
http://mfcmapi.codeplex.com/releases/view/101020
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
More reference post:
http://social.technet.microsoft.com/Forums/en-US/a926f0b5-0e66-4f43-8ac3-50791df16154/microsoft-office-2013-freebusy-information-issue?forum=officeitp
Tony Chen
TechNet Community Support

Screen redraw issues

Hi everyone
My new Macbook appears to have screen redraw issues (as I've mentioned in other posts). It often does not redraw the screen quickly or smoothly. It may redraw the screen in bands from the top, or the Dock may come up in jerks. Also, the cursor often freezes, especially when switching from one app. to another, or after performing a function in an app (e.g. Save, or Delete in Finder). Messing around with the keyboard or trying another function often unfreezes the cursor again. It's frustrating.
I think it's probably a compatibility issue, since quite a few of the applications I transferred over from my iBook are not yet available as fat binaries ("universal" binaries). Yet they seem to work OK. I'll post about that separately.
If anyone else has experienced screen redraw issues, I'd be interested to hear about them. This machine should run much faster than my iBook, not much more slowly.

Thanks again, Shawn. I wasn't sure whether to post all the problems as one mess, or separately so people could search for them separately. I decided on separately, in case they weren't related, but mentioned the other bits in each post in case they were.
I myself searched under all these problems, but had little success. I don't know if that's an artefact of the Search or not. I suppose it depends on things like using "frozen cursor" or "freezing cursor". I certainly found more posts related to my problems when I read all the forum posts for MacBook Users. It took quite a while, but was more productive than searching. I'd rather not have to spend quite as much time on finding data, though.
Thanks again.
from Clytie

What Free Screen Recorder Should I Use To Record My Minecraft

Hello, I've been recently posting videos on youtube. I just upgraded my RAM from 2GB to 8GB and I need a good, lag free, screen recorder to capture minecraft. I'm running on OS X Mountain Lion late 2009 13-inch white MacBook. Any suggestions?

Cleaning is covered in the basics section of the manual:
iPod touch User Guide (For iOS 5.1 Software)

Windows 2008 R2 Screen Lock Issue (GPO)

Scenario: We will be deploying POS machines at our stores that will have Windows 2008 R2 as the preferred OS. The function of this POS machine is for POS administration and not for ringing up sales. The machines have been configured to autologin a specific
user via GPO for POS functions. Also, a specific POS desktop environment shell has been configured to launch instead of Explorer (explorer.exe) shell environment at autologon.
Everything seems to be working as expected except for the session of the user locking. Since the POS environment needs to be up at all times with the specific user profile, we do not want the OS to lock the user session. I've timed it and it seems to lock
the screen (not log off) at approximately 15 minutes of inactivity, we do not want this.
So far, these are the GPOs I have configured that have not fixed the issue:
Computer Configuration>Policies>Windows Settings>Security Settings>Local Policies>Security Options>Microsoft Network Server: Amount of idle time required before suspending session = 99999 minutes
Computer Configuration>Policies>Administrative Templates>System>Power Management>Sleep Settings>Allow applications to prevent automatic sleep (plugged in) = Enabled
Computer Configuration>Policies>Administrative Templates>System>Power Management>Sleep Settings>Require a password when a computer wakes (plugged in) = Disabled
Computer Configuration>Policies>Administrative Templates>System>Power Management>Sleep Settings>Turn off hybrid sleep (plugged in) = Enabled
Computer Configuration>Policies>Administrative Templates>System>Power Management>Sleep Settings>Turn on the ability for applications to prevent sleep transitions (plugged in) = Enabled
Computer Configuration>Policies>Administrative Templates>System>Power Management>Video and Display Settings>Turn off the display (plugged in) = Enabled = 99999 seconds
User Configuration>Policies>Administrative Templates>Control Panel>Personalization>Enable screen saver = Disabled
User Configuration>Policies>Administrative Templates>Control Panel>Personalization>Password protect the screen saver = Disabled
User Configuration>Policies>Administrative Templates>System>Ctrl+Alt+Del Options>Remove Lock Computer = Enabled
User Configuration>Preferences>Windows Settings>Registry>HKCU>Control Panel>Desktop>ScreenSaveActive = 0
What are we doing wrong? How do I configure the OS to not lock the user session but keep it active at all times?
As a side note: We have Windows 7 POS machines also that will be ringing up sales that we do not have the screen lock issue.

Hi,
>>Please see my setting indicated in my original post. We have Turn Off the Display set to 99999 seconds.
I understand that we have set the Turn Off the Display for this amount of time. However, just for double check, we can go to the power plan we are using to check if the setting has been applied successfully. If the setting has been applied successfully,
it should be grayed out. Or, we can run command gpresult/h gpreport.html
with admin privileges to collect group policy result report to check this.
Besides, do we use other third party software to protect our computer? We can try to clean boot the server to see if the situation persists.
Regarding how to perform a clean boot, the following article can be referred to for more information.
How to perform a clean boot in Windows
http://support.microsoft.com/KB/929135
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Firefox version 22 screen tearing issue with video

So I've updated to Firefox 22 and have recently started noticing this really annoying screen tearing issue when scrolling. its only when i use Firefox sometimes it happens when I'm watching videos sometimes it just happens on normal every day pages. I've tried to duplicate this issue in other browsers (Chrome) and it just only seems to happen with Firefox. anyone else experienced this and knows how to stop it? kinda annoying

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Flicker free or de-interlace filter

I can't seem to find a flicker free or de-interlace filter?

moze, that's correct.... the project (timeline) needs to remain interlaced. I've placed a few lower thirds which were created in PS and imported as png.
Doing this in FCP 7 I'd then add the "Flicker Filter MAX" filter which eliminated flickering when played back on a interlaced TV.
hafken - Thanks for that advice, I've only just bought the Ripple Traning Motion 5: Rigging & Publishing Titles, Transition, Effects & Generators for Final Cut Pro X, so I'll go through that and try work this out.
Cheers to all once again.

Duke Pt avail. 2nd time askin, (Flicker-free background) Simple Animation

2nd time askin, since didn't get sufficient help. Duke Pts available! I am trying to create simple animation on a solid constant background. I used double buffering for moving the object and it works fine. But the problem is with the background image. The image seems to flicker while the object is moving. Here's my code:
import java.awt.*;
import java.applet.Applet;
public class changed extends Applet implements Runnable{
Image buffer;
Graphics bufferg;
Thread main;
int x=0;
boolean flag=false;
public void init(){
setSize(500,500);
main=new Thread(this);
main.start();
buffer=createImage(getSize().width,getSize().height);
bufferg=buffer.getGraphics();
public void run(){
while(main!=null){
try     {
main.sleep(50);
catch(Exception e){}
repaint();
public void stop(){
if(main!=null){main.stop();}
public void paint(Graphics g){
update(g);
public void update(Graphics g){
Dimension d=getSize();
bufferg.setColor(getBackground());
bufferg.fillRect(0,0,d.width,d.height);
bufferg.setColor(Color.red);
Image img = getImage(getCodeBase(),"bliss.jpg");
if((x<500)&(!flag))
bufferg.fillRect(x+=5,10,25,25);
else
flag=true;
bufferg.fillRect(x-=5,10,25,25);
if(x==0)
flag=false;
g.drawImage(img,50,50,this);
g.drawImage(buffer,0,0,this);
Please help me with this minor problem. I think what's happening is that the background is been drawn over and over again. I don't know how to make it constant and flicker-free.

Possible 2 things:
1. You're reloading the image on each repaint:
Image img = getImage(getCodeBase(),"bliss.jpg");You shouldn't do that, you should just load it in init.
2. You're drawing the image with the non-buffer Graphics "g" instead of "bufferg." You should use bufferg and draw it before anything else.
I've modified the code for you, it should work but I can't test it because I don't have bliss.jpg. Let me know if it doesn't work.
Here's the modified code:
import java.awt.*;
import java.applet.Applet;
public class changed extends Applet implements Runnable {
     Image buffer,img;
     Graphics bufferg;
     Thread main;
     int x = 0;
     boolean flag = false;
     public void init() {
          setSize(500, 500);
          img = getImage(getCodeBase(), "bliss.jpg");
          main = new Thread(this);
          main.start();
          buffer = createImage(getSize().width, getSize().height);
          bufferg = buffer.getGraphics();
     public void run() {
          while (main != null) {
               try {
                    main.sleep(50);
               } catch (Exception e) {}
               repaint();
     public void stop() {
          if (main != null) {
               main.stop();
     public void paint(Graphics g) {
          update(g);
     public void update(Graphics g) {
          Dimension d = getSize();
          bufferg.drawImage(img, 50, 50, this);
          bufferg.setColor(getBackground());
          bufferg.fillRect(0, 0, d.width, d.height);
          bufferg.setColor(Color.red);
          if ((x < 500) & (!flag)) {
               bufferg.fillRect(x += 5, 10, 25, 25);
          } else {
               flag = true;
               bufferg.fillRect(x -= 5, 10, 25, 25);
               if (x == 0)
                    flag = false;
          g.drawImage(buffer, 0, 0, this);
}

Flicker free screen / IFrames issue

Similar Messages

Maybe you are looking for