Flickering after adding Titles

Hi, I'm using Premiere Pro cs6 with mainly 1080i footage on iMac 10.8osx.
If I add a title the resulting file flickers on playback after exporting it.
This happens regardless of sequence settings, export settings and transcoding, (I've done many tests).
I have noticed the flicker disappears when viewed on a crappy Windows monitor but I guess that's not too surprising.
Would be grateful for any thoughts on this.
Cheers.

Welcome to the forum.
Also, some fonts can cause "flicker," such as ultra-thin fonts, or serif-fonts. Per Jeff's request above for a screen-cap, we should be able to see if you have chosen a font with potential problems in it, but you might also want to state the font used.
Good luck,
Hunt

Similar Messages

  • Laggy video after adding title...

    So, I completed a mini wedding movie with sound effects and titles. However, when playing back the movie, the video footage with titles become very laggy. It seems like it's a bit choppy... Video footage with only added audio/sound effects seem to run smooth... Why is this? and is there a fix for this?

    Just for an update, I just went ahead and exported the movie anyways... Guess what? It runs very smooth on QT and iTunes. I even burned a DVD and played on a regular DVD player, and it is also very smooth. So, I guess just because you have a laggy video in the iMovie preview, doesn't necessarily mean that it'll be like that after exporting... I am very happy!

  • Flickering after adding shadow and highlight effect

    I seem to be getting a flicker, in any shot that has had the shadow and highlight effect added. It is as if premiere flashes from an uneffected frame and to a frame after "correcting" with shadow and highlight. Sometimes hardly noticeable until I have "make movie" and play it as an avi.
    regards

    Bill Hunt wrote:
    Well, as with most of the "auto" Effects, things work well, only if everything stays the same, like lighting, etc.. If one has a Clip, where lighting, exposure, white-balance, etc. changes, then the auto Effects WILL "pulse," or "strobe." It's sort of like the old days, with auto-aperture, and "seeking" for exposure.
    Lock down the camera, and do not change the lighting, exposure, or white-balance, and the auto aspect of Highlight & Shadow (plus most other "auto" Effects), will work just fine.
    I use Highlight & Shadow fairly often, but seldom on its "auto" adjustment - I almost always manually set the parameters manually.
    Good luck,
    Hunt
    This thread isn't long, and clearly in the several posts above, we discuss that the bug (which Adobe refuses to fix after years of bug reports) occurs regardless of whether automatic or manual control is being used.  So you are not offering a solution; Adobe needs to do that.

  • After adding folders to iTunes library, now have duplicates of each song

    I store all my music on a separate drive, M:\
    I have a specific file structure setup that has worked for me for years, M:\Artist\Album
    I recently received an iPod for my birthday, and started using iTunes. After adding my music drive (M:\) for inclusion into the library (without "keep..." and "copy..." selected, as to keep my current file structure intact), when selecting "File->Display Duplicates" just about every song in the library has a duplicate, one in the original folder "M:\Artist\Album", and another in "M:\Playlists\..\Artist\Album". I understand that basically somehow iTunes glitched and started in the "M:\Playlist" directory when adding to the library at some point, however I am at a loss as to how. In my actual folders I only have 1 copy of each song, so basically iTunes is making a symbolic link to each song and adding it into the library as a separate song.
    I have over 9000 (must...resist...meme...) songs in my library, and removing and restoring takes quite a while. I'm pretty sure I'm going to have to do this at least once now, but any ideas as to why or advice on how to avoid this particular problem in the future?
    I am pretty set in my ways of my current file structure, since I don't use iTunes as my primary media software, so I would prefer to not have to resort to succumbing to just letting iTunes handle everything the way it wants (I pretty much hate that).
    Thank you for any suggestions you may have.
    EDIT: Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?
    Message was edited by: kaziekama

    If you have "Keep..." and "Copy..." unchecked, iTunes will simply reference the existing file, and will not change your file structure, as you correctly note.
    I'm fairly sure that some other program is operating on your files. The "Playlists" folder that you mention has nothing to do with iTunes. On my PC, only Windows Media and Roxio use it.
    To your question +"Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?"+ the answer is no. When iTunes rips a CD, it names the files as track number and title, with no option to do differently. And as far as placing the ripped files, they go in Artist/Album, with no option to do differently. As full-featured ripping programs go, iTunes is not even in the race.

  • SOA Composites not getting deployed after adding AppsLoggerService

    Hi
    I am trying to enable logging for mediator components. I followed this kix page (Fusion Logging and Error Handling for SOA[https://kix.oraclecorp.com/KIX/display.php?labelId=1918&articleId=200788]) to enable the logging.
    After adding the service to use AppsLoggerService I am not able to deploy the composites to the SOA server. However deployment of composites without this change goes fine. To enable mediator level logging I created a ADF-BC service and provided the AppsLoggerService WSDL and in the mplan I craeted a xsl for transformation. I am getting this error on deployment :
    Deploying profile...
    [04:15:09 PM] Wrote Archive Module to /ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Deploying sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:09 PM] Processing sar=/ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Adding sar file - /ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Preparing to send HTTP request for deployment
    [04:15:09 PM] Creating HTTP connection to host:adc60091fems.us.oracle.com, port:6169
    [04:15:09 PM] Sending internal deployment descriptor
    [04:15:09 PM] Sending archive - sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:26 PM] Received HTTP response from the server, response code=500
    [04:15:26 PM] Error deploying archive sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:26 PM] HTTP error code returned [500]
    [04:15:26 PM] Error message from server:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
    <HTML>
    <HEAD>
    <TITLE>Error 500--Internal Server Error</TITLE>
    <META NAME="GENERATOR" CONTENT="WebLogic Server">
    </HEAD>
    <BODY bgcolor="white">
    <FONT FACE=Helvetica><BR CLEAR=all>
    <TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
    <FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 500--Internal Server Error</H2>
    </FONT></TD></TR>
    </TABLE>
    <TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><pre>javax.servlet.ServletException: java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/oxm/record/DOMReader
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:333)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/oxm/record/DOMReader
         at org.eclipse.persistence.internal.oxm.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:325)
         at org.eclipse.persistence.internal.oxm.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:424)
         at org.eclipse.persistence.oxm.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:532)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.getSchema(SDOTypesGenerator.java:2184)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.getSchema(SDOTypesGenerator.java:2165)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.define(SDOTypesGenerator.java:116)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.define(SDOTypesGenerator.java:112)
         at org.eclipse.persistence.sdo.helper.delegates.SDOXSDHelperDelegate.define(SDOXSDHelperDelegate.java:325)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOFromTypes(SDOUtils.java:332)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOs(SDOUtils.java:271)
         at oracle.integration.platform.blocks.sdox.SDOUtils.getPortMetaData(SDOUtils.java:256)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOs(SDOUtils.java:170)
         at oracle.integration.platform.blocks.sdox.SDOExternalBindingComponent.load(SDOExternalBindingComponent.java:258)
         at oracle.integration.platform.blocks.sdox.SDOExternalBindingComponent.load(SDOExternalBindingComponent.java:33)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:202)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:94)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:144)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:62)
         at sun.reflect.GeneratedMethodAccessor2555.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
         at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:69)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy199.load(Unknown Source)
         at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:32)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:352)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:217)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:159)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:108)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:96)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:77)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         ... 6 more
    </pre></FONT></TD></TR>
    </TABLE>
    </BODY>
    </HTML>
    [04:15:26 PM] Check server log for more details.
    [04:15:26 PM] Error deploying archive sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:26 PM] #### Deployment incomplete. ####
    [04:15:26 PM] Error deploying archive file:/ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    I have tried deploying the composites from the jdev and the terminal but in both the case I am getting the same error.
    Thanks,
    Rakesh

    Hi
    I am trying to enable logging for mediator components. I followed this kix page (Fusion Logging and Error Handling for SOA[https://kix.oraclecorp.com/KIX/display.php?labelId=1918&articleId=200788]) to enable the logging.
    After adding the service to use AppsLoggerService I am not able to deploy the composites to the SOA server. However deployment of composites without this change goes fine. To enable mediator level logging I created a ADF-BC service and provided the AppsLoggerService WSDL and in the mplan I craeted a xsl for transformation. I am getting this error on deployment :
    Deploying profile...
    [04:15:09 PM] Wrote Archive Module to /ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Deploying sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:09 PM] Processing sar=/ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Adding sar file - /ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Preparing to send HTTP request for deployment
    [04:15:09 PM] Creating HTTP connection to host:adc60091fems.us.oracle.com, port:6169
    [04:15:09 PM] Sending internal deployment descriptor
    [04:15:09 PM] Sending archive - sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:26 PM] Received HTTP response from the server, response code=500
    [04:15:26 PM] Error deploying archive sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:26 PM] HTTP error code returned [500]
    [04:15:26 PM] Error message from server:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
    <HTML>
    <HEAD>
    <TITLE>Error 500--Internal Server Error</TITLE>
    <META NAME="GENERATOR" CONTENT="WebLogic Server">
    </HEAD>
    <BODY bgcolor="white">
    <FONT FACE=Helvetica><BR CLEAR=all>
    <TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
    <FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 500--Internal Server Error</H2>
    </FONT></TD></TR>
    </TABLE>
    <TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><pre>javax.servlet.ServletException: java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/oxm/record/DOMReader
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:333)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/oxm/record/DOMReader
         at org.eclipse.persistence.internal.oxm.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:325)
         at org.eclipse.persistence.internal.oxm.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:424)
         at org.eclipse.persistence.oxm.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:532)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.getSchema(SDOTypesGenerator.java:2184)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.getSchema(SDOTypesGenerator.java:2165)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.define(SDOTypesGenerator.java:116)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.define(SDOTypesGenerator.java:112)
         at org.eclipse.persistence.sdo.helper.delegates.SDOXSDHelperDelegate.define(SDOXSDHelperDelegate.java:325)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOFromTypes(SDOUtils.java:332)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOs(SDOUtils.java:271)
         at oracle.integration.platform.blocks.sdox.SDOUtils.getPortMetaData(SDOUtils.java:256)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOs(SDOUtils.java:170)
         at oracle.integration.platform.blocks.sdox.SDOExternalBindingComponent.load(SDOExternalBindingComponent.java:258)
         at oracle.integration.platform.blocks.sdox.SDOExternalBindingComponent.load(SDOExternalBindingComponent.java:33)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:202)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:94)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:144)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:62)
         at sun.reflect.GeneratedMethodAccessor2555.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
         at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:69)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy199.load(Unknown Source)
         at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:32)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:352)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:217)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:159)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:108)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:96)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:77)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         ... 6 more
    </pre></FONT></TD></TR>
    </TABLE>
    </BODY>
    </HTML>
    [04:15:26 PM] Check server log for more details.
    [04:15:26 PM] Error deploying archive sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:26 PM] #### Deployment incomplete. ####
    [04:15:26 PM] Error deploying archive file:/ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    I have tried deploying the composites from the jdev and the terminal but in both the case I am getting the same error.
    Thanks,
    Rakesh

  • Old accounts disappeared after adding google account

    I have similar problem, after adding new Google account on BB, old account disappeared and all infos are taken from Google and not anymore from Outlook. Then re-created previous account and deleted Google one: no solution, re-installed BB-DTop Mng: managed to retrieve mail, notes, etc. from Outlook but the address book remains only Google one!
    How to ERASE Google presence totally?
    knottyrope wrote:
    there might be a service book that is remaining on device.
    Also you can connect to desktop manager and change default address book.
    Subject Title edited to reflect new topic.

    Did you eerase and re-install, then migrate?
    s2kip wrote:
    However, when I boot with Windows, I can see the directories of my accounts.
    Where in the directory structure are they?
    Have you looked in /Users to see if a new account was created there?

  • IMovie quits when adding titles

    iMovie (9.0.8) quits when adding titles (and sometimes just randomly although it seems to be related to adding titles).
    I have repaired permissions and deleted com.apple.iMovieApp.plist from library to no avail.
    It is not related to a corrupt project as it happens to all my current projects.
    This is the first part of the crash report:
    Process:         iMovie [16194]
    Path:            /Applications/iMovie.app/Contents/MacOS/iMovie
    Identifier:      com.apple.iMovieApp
    Version:         9.0.8 (1778)
    Build Info:      iMovieApp-1778000000000000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [148]
    User ID:         501
    Date/Time:       2012-10-21 10:49:22.738 +0800
    OS Version:      Mac OS X 10.8.2 (12C60)
    Report Version:  10
    Interval Since Last Report:          316922 sec
    Crashes Since Last Report:           21480
    Per-App Interval Since Last Report:  216105 sec
    Per-App Crashes Since Last Report:   7
    Anonymous UUID:                      41763BF4-5BD1-26E5-4614-F60738A1FE56
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000025d
    VM Regions Near 0x25d:
    --> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL  /Applications/iMovie.app/Contents/MacOS/iMovie
        VM_ALLOCATE            0000000000001000-00000000000e2000 [  900K] ---/--- SM=NUL 

    Hi
    I doubt - BUG - I guess corrupted iMovie pref file (to get this You only need to Force/Panic Halt the program and errors are entered in it)
    See if this helps
    When iMovie doesn't work as intended this can be due to a lot of reasons
    • iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    • Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
    • Event or Project got corrupted - try to make a copy and repair
    • a codec is used that doesn't work
    • problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    • version miss match of QuickTime Player / iMovie / iDVD
    • preferences are wrong - Repair Preferences
    • other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    • External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    • USB-flash-memories do not work
    • Net-work connected hard disks - do not work
    • iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
    This You do by
    _ close iPhoto
    _ on start up of iPhoto - Keep {cmd and alt-keys down}
    _ now select all five options presented
    _ WAIT a long long time
    • free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    • external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    • GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    • Screen must be set to million-colors
    • Third-party plug-ins doesn't work OK
    • Run "Cache Out X", clear out all caches and restarts the Mac
    • Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    • Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    • In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • Lock Durations After Added?

    Ok, I am a new Mac owner, and I must say that I love it. I previously had terrible fits with Windows Movie Maker. Crashes, transitions not working, freezing up, etc. IMovie is 100% better then WMM, but I am still running into a major problem. I am working on a rather big project, around 57 minutes long on WMM. The problem is on IMovie, I can't for the life of me get the durations to lock. I have the transition set to a 2sec duration automatically, those work fine. I have troubleshooted this problem for nearly 3 days now with no luck. When I add a picture, or a scrolling credit or something like that, it either adds sec. to previously added titles or clips, or subtracts them. Sometimes it will do this to some of my very first additions to the project which is now only 6 min long, but it is going to prove to be menacing as the project becomes longer. I hope there is just something I am missing that's right in front of my face. I really like IMovie, so if there is anyone who can help a Mac Noob it would be much appreciated.

    When you add a transition, it takes half the length of the transition from the clip or still in front of the transition, and half the length of the transition from the clip or still after the transition. This means that a transition can be no longer than half the length of the shortest clip or still around it. For more details on how this works...
    NTSC = 30 frames per second
    PAL = 25 frames per second
    I ran an experiment on NTSC, and here is how it works. First with stills, then with video clips.
    First do the math in Frame mode.
    NTSC clip 3:00>transition 1:00 >clip 3:00
    convert to frames
    clip 90 frames > transition 30 frames > clip 90 frames
    This implies that originally you had stills that were 3:15 (=105 frAMES) long with no transitions.
    Two clips each 105 frames long. Put a transition between of 30 frames. Divide by two to get 15 frames subtracted from each side. Now you have 3:00 (=90 frames), transition of 30 frames, next still of 90 frames. Total frames still equals 210.
    Now change transition to 1:15 (=45 frames). Divide by 2 and round down = 22 frames subtracted from each side. Now you have still of 105-23 = 82 frames, transition of 44 frames, still of 82 frames. The overall total is still 210.
    Now let's look at a different case. Delete the transition, and set the length of the photos with no transitions to 3:15 (105 frames).
    Now, go into File/Project Properties/Timing, and put a check next to Photo Duration:Applies to all photos.
    Now, the photos will stay the same even when you add transitions, but the project gets longer.
    Original still of 105, still of 105 = 210
    Insert transition of 30 frames
    Now we have still of 105, transition of 30, still of 105, and the total = 240. The project got longer by 30 frames, but the photos kept their original length.
    For Video, start with 2 clips of 4 seconds each (= 120 frames each)
    Add 1 second transition. Clips are now 105 frames then 30 frame transistion. Total frames still 240.
    Change transition to 45 frames. Clips are now 98 frames plus 44 second transition. Total frames still 240.
    In iMovie 08 (version 7) you could select whether transitions for video would make the movie longer or would keep the same length. It was confusing, and when you make the movie longer, you pick up video frames that you had previously edited out, so the results were randomly bad. So I think in iMovie 09 (version 8), they decided that transitions for video would keep the total project length the same.
    Another point...
    50+ minutes is a very long movie for iMovie. If it is photos only it might work, but if it includes a lot of high-def video, it probably will not work. iMovie 09 has some great ease of use features and lets you see your edits in real time, but this becomes a constraint as the movie gets longer and virtual memory fills up. You may want to split your movie into shorter movies, or you may want to try Final Cut Express, which is fine for long movies (but harder to learn) because it has a more traditional architecture.

  • BUG: Search not avail after adding song to playlist (after creating folder for playlists) - iPad app

    So this sounds like an unlikely bug, but I can duplicate it again and again.Starting point: Lots of playlists, no folders. I have the latest iOS version on my iPad and the latest Spotify update.Used PC client to create a folder and moved some playlists to that folder.Back on iPad, search for song and then add it to any playlist. (It doesn't matter which playlist, whether it's in a folder or not.)Here's where the problem occurs: After adding a song to a playlist, it is no longer possible to search for other songs. The search function simply fails to respond. I can listen to songs on playlists but can't use the search. If I want to search, I have to restart the app. Annoying!  

    If you have "Keep..." and "Copy..." unchecked, iTunes will simply reference the existing file, and will not change your file structure, as you correctly note.
    I'm fairly sure that some other program is operating on your files. The "Playlists" folder that you mention has nothing to do with iTunes. On my PC, only Windows Media and Roxio use it.
    To your question +"Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?"+ the answer is no. When iTunes rips a CD, it names the files as track number and title, with no option to do differently. And as far as placing the ripped files, they go in Artist/Album, with no option to do differently. As full-featured ripping programs go, iTunes is not even in the race.

  • Display flickering after switching laptop on, display flickering after switching laptop on

    after switching on my laptop the screen starts flickering.

    after switching on my laptop the screen starts flickering.

  • How do I set up my Imac after adding a SSD along with my existing HD

    How do I set up my Imac after adding a SSD so that my system and apps are on the SSD and everything else is on the HD?  I am using mountain Lion.  I want to make sure I can still do Time Machine backups. 
    I was planning on first formatting the SSD and then using Migration Assistant to copy the System and the Library and the Apps over.  Where it gets confusing is the User account where some of the items will be on the SSD but I want all my folders to be on the HD.  Do I just not copy over that other stuff and once I restart from the SSD it will know where all the folders are?  Is there anything I need to know about setting up a time machine backup after that?  Will the backup I had from the one drive have to be erased and start a whole new backup?
    I just want to do this right so I don't have some major problems.
    Thanks for any help.
    Michael

    time machine backed up your whole system data/everything in time machine hdd.
    you want to use ssd over hdd so you need to put new mac os x in ssd.
    then copy all the stuff that you want to put in ssd.
    from my point of view put the mac os x and other application in ssd and leave other data in hdd.(music,movies,etc....)
    more info about time machine : http://support.apple.com/kb/ht1427

  • What is the expected behavior in a zone after adding a new static route in Solaris 10....

    Hi Folks,
    I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
    Routing Table: IPv4
    Destination Gateway Flags Ref Use Interface
    172.23.248.0 172.23.248.24 U 1 6794 bge1
    204.154.126.0 172.23.248.100 UG 1 0
    204.154.127.0 172.23.248.100 UG 1 0
    204.154.134.0 172.23.248.100 UG 1 0
    204.154.135.0 172.23.248.100 UG 1 0
    204.154.132.0 172.23.248.100 UG 1 0
    204.154.133.0 172.23.248.100 UG 1 0
    204.154.130.0 172.23.248.100 UG 1 0
    204.154.131.0 172.23.248.100 UG 1 0
    204.154.128.0 172.23.248.100 UG 1 0
    204.154.129.0 204.154.129.74 U 1 7980 bge0
    204.68.180.0 172.23.248.100 UG 1 0
    204.68.181.0 172.23.248.100 UG 1 0
    192.168.0.0 172.23.248.100 UG 1 34
    172.28.0.0 172.23.248.100 UG 1 9
    172.29.0.0 172.23.248.100 UG 1 0
    172.30.0.0 172.23.248.100 UG 1 0
    172.31.0.0 172.23.248.100 UG 1 0
    172.24.0.0 172.23.248.100 UG 1 0
    172.25.0.0 172.23.248.100 UG 1 44
    172.26.0.0 172.23.248.100 UG 1 934
    172.27.0.0 172.23.248.100 UG 1 0
    172.20.0.0 172.23.248.100 UG 1 0
    172.21.0.0 172.23.248.100 UG 1 0
    172.22.0.0 172.23.248.100 UG 1 82
    172.23.0.0 172.23.248.100 UG 1 161975
    172.16.0.0 172.23.248.100 UG 1 0
    172.17.0.0 172.23.248.100 UG 1 0
    172.18.0.0 172.23.248.100 UG 1 0
    172.19.0.0 172.23.248.100 UG 1 82
    10.0.0.0 172.23.248.100 UG 1 1766
    224.0.0.0 204.154.129.74 U 1 0 bge0
    default 204.154.129.1 UG 1 8411
    127.0.0.1 127.0.0.1 UH 225713773 lo0
    Here is the route table after I added my one additional route (note the top line):
    Routing Table: IPv4
    Destination Gateway Flags Ref Use Interface
    204.154.129.209 172.23.248.100 UGH 1 5
    172.23.248.0 172.23.248.28 U 1 5757 bge1:3
    204.154.126.0 172.23.248.100 UG 1 0
    204.154.127.0 172.23.248.100 UG 1 0
    204.154.134.0 172.23.248.100 UG 1 0
    204.154.135.0 172.23.248.100 UG 1 0
    204.154.132.0 172.23.248.100 UG 1 0
    204.154.133.0 172.23.248.100 UG 1 0
    204.154.130.0 172.23.248.100 UG 1 0
    204.154.131.0 172.23.248.100 UG 1 0
    204.154.128.0 172.23.248.100 UG 1 0
    204.154.129.0 204.154.129.86 U 1 484 bge0:2
    204.68.180.0 172.23.248.100 UG 1 0
    204.68.181.0 172.23.248.100 UG 1 0
    192.168.0.0 172.23.248.100 UG 1 114
    172.28.0.0 172.23.248.100 UG 1 2
    172.29.0.0 172.23.248.100 UG 1 0
    172.30.0.0 172.23.248.100 UG 1 0
    172.31.0.0 172.23.248.100 UG 1 0
    172.24.0.0 172.23.248.100 UG 1 0
    172.25.0.0 172.23.248.100 UG 1 43
    172.26.0.0 172.23.248.100 UG 1 944
    172.27.0.0 172.23.248.100 UG 1 0
    172.20.0.0 172.23.248.100 UG 1 0
    172.21.0.0 172.23.248.100 UG 1 0
    172.22.0.0 172.23.248.100 UG 1 77
    172.23.0.0 172.23.248.100 UG 1 160823
    172.16.0.0 172.23.248.100 UG 1 0
    172.17.0.0 172.23.248.100 UG 1 0
    172.18.0.0 172.23.248.100 UG 1 0
    172.19.0.0 172.23.248.100 UG 1 0
    10.0.0.0 172.23.248.100 UG 1 183
    224.0.0.0 204.154.129.86 U 1 0 bge0:2
    default 204.154.129.1 UG 1 1850
    127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
    My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
    Thanks,
    Tom Gellert
    tom.gellert&#64;tellabs.com

    Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered.  You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

  • Usertable error after adding a udf

    I have a UI add-on that assigns values ​​to a UDT by usertable object of the DI API, the problem is generated after adding a UDF from SAP menu and try to assign a value from the DI. The error is Invalida Field Name
    My question is, is necessary to wait a while until SAP records the new field to be accessible by usertable?
    Any suggestions?
    oUserTable.UserFields.Fields.Item("U_" + colName).Value = respuesta;

    Hi Ricardo,
    As far as I know, you can use this field as soon as it is added to the usertable. But please make sure that this has been added successfully in your table and also make sure that ("U_" + colName ) is the same as it appears in SQL Server. Make sure that you are providing the right field name.
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • A/P Invoice Vendor Ref Number Field updating after adding the Invoice Copy

    Hi All,
                  I am able to change the Vendor Reference number in A/P Invoice Document after adding the Document.  I want to restrict this to happen. Plzz help how to do this????
    Regards,
    Sree.

    1.The Modify Posted A/P Documents authorization refers to some fields only, e.g. the Due Date or Pay to address.
    2. Additional authorization can be defined only for full forms, not for fields.
    3. The SP Joseph suggests will refuse those modifications when the Vendor ref is empty.
    To avoid modifying the Vendor ref you can use this code:
    IF @Object_type = N'18' and @transaction_type = N'U'
    BEGIN
    declare @li int
    set @li=
    (select max(t.LogInstanc)
       from ADOC t
       where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
    IF
       (select isnull(t.NumAtCard,'')
        from ADOC t
        where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
          and t.LogInstanc=@li-1)
    !=(select isnull(t.NumAtCard,'')
       from OPCH t
       where t.DocEntry=@list_of_cols_val_tab_del)
    begin
      Set @error = 10
      Set @error_message = N'Vendor refernce not modifiable !'
    end
    END
    Or if you want to allow modifying an unfilled reference, then this:
    IF @Object_type = N'18' and @transaction_type = N'U'
    BEGIN
    declare @li int
    declare @pref nvarchar(100)
    set @li=
    (select max(t.LogInstanc)
       from ADOC t
       where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
    set @pref=
    (select isnull(t.NumAtCard,'')
        from ADOC t
        where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
          and t.LogInstanc=@li-1)
    If @pref !='' and @pref !=
    (select isnull(t.NumAtCard,'')
       from OPCH t
       where t.DocEntry=@list_of_cols_val_tab_del)
    begin
      Set @error = 10
      Set @error_message = N'Filled vendor refernce not modifiable !'
    end
    END

  • Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

    I added a dataset to an existing report and broke an aggregation.  In the old (i.e. single dataset) report, this expression below worked fine.  I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
    = CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
    After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset".  Having done some research online, I found that I
    needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
    = CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
    Am I missing something?  Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me. 
    Thanks in advance!
    Brian

    I found the answer.  Apparently, my expression syntax was off.  This expression does the trick...
    = CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
    I just happened upon this particular syntax searching online.  I was trying to specify the dataset name after each .value, but I never got that to work.   This is the only time I have found this particular syntax online. 

Maybe you are looking for

  • Problem in batches

    Hi, "Invalid batch according to selection criteria in batch determination". This is problem while selecting batch in goods issue. Can anyone explain to how solve this. thanks/regards vish

  • Why won't my mac internal microphone work?

    Why won't my mac internal microphone work?

  • Oracle 10G AS, Batch Update doesn't commit.

    Hello, We are using Batch uptdate to commit a set of records, but to our surprise one of the batches commits in DB and the other doesnt. The below pseudo code explains our scenario : String str1="INSERT INTO TBL1 (COL1,COL2) VALUES (?,?) "; String st

  • T-23 needing to get xp pro re installed

    My tennant asked me to fix her father's t-23  that she inherited. Her "geek" nephew, wiped the drive with a botched linux install, so I can't use the convenient (thinkpad) button for restoring windows xp. From what I've learned from reading the Lenov

  • I can install Photoshop Elements 12 but why can I not open the Editor?

    I have opened the Installer and found the following error and comments. What is the problem? Extracting to "C:\Program Files (x86)\Common Files\Adobe\Installers\" Use Path: yes   Overlay Files: no Error: Åtkomst nekad. Cannot create C:\Program Files