Flickering Flash Logo in page header

Hey, I am pretty sure that I am not going to be able to
prevent this: anybody figured out yet how to keep a Flash log from
flickering and disappearing/reappearing when you pull down a drop
down menu?
Doesn't look like Adobe has, either, their nav bars all make
things shimmy very slightly.
Thanks for any help-
Lizzie

Hi,
Go through this link below:
http://www.sap-img.com/fu002.htm
Hope it helps
Regards
Mansi

Similar Messages

Error message "Page header or footer longer than a page"

Hi
Our application call crystal report to generate/display crystal report in PDF format. We have a dev system to test this, all looking good, however when we moved to production server, the attached error message is displayed when running crystal report.
Invoking method GENERATEREPORT returned error Page Header plus Page Footer is too large for the page.
Error in File C:\DOCUME~1\SERV
IC1.LIM\LOCALS1\Temp\temp coq new xxxx.rpt:
Page header or footer longer than a page.
Same report doesnu2019t get this error message if running it from crystal report developer.
Not all crystal reports got this error, but some of reports display strange view in PDF, the content of report are reduced in a paper size like label size, not A4 size. I have checked the default printer on the server, it points to a normal window printer, not a label printer. I have checked all possible settings on production server and compared with dev server, all looks same to me
I suspect the label printing size is used somehow when the report is previewed in pdf format, not normal A4 size although I have selected a normal window printer as a default printer on the window,what else should i check?
Could you please shed some light on this?
Thanks!
Li

I found the issue is from label printer that is setup on the production server. After I removed the label printer from the server, then error message is gone, all report running fine.
This label printer is not the default window printer, it is a network printer but is configured as a printer using local port on the server.
I think for some reasons, crystal report alway picks up the label printer page size, not the normla page size, I am not sure why and how crystal report do this, it should pick up the default printer, which is a normal printer.
There is no error when I run report within CR. The error happens only when I try to generate crystal report from our application.
I do have logo in page header/footer, subreports in report footer, but I don't think they cause the problem, because I can run same report without any problem in dev system.
Any idea what I should check next?
Thanks

Pages 5.2.2 - how to add a logo in the page header

Hi, how can I add a logo in the page header of each page?!
seems header and footer only supports text and automated page numbering only...
I need some advise on this one
thanks

Add an image to any page in the section, then drag it where you want it to appear on each page.
Reduce the opacity using the slider in the Style pane of the Format inspector to change the object’s transparency.
Choose Arrange > Section Masters > Move Object to Section Master (from the Arrange menu at the top of your computer screen).

How do I insert a logo into my header in the new Pages?

I need to paste a small company logo inside my header box so that it appears on every page of our company report and I can't figure out how!
After I updated Pages yesterday I have been having MANY problems. We are new to Mac and Pages.

Is this Pages for iOS (iPad/iPhone) or for OS X? If it is the former, you are in the wrong forum (https://discussions.apple.com/community/iwork/pages)

Flash logo

hey guys, i have a website that i need to add a flash logo
that i created, currently it has a gif logo, i tried changing it on
the css to swf and uploading both, swf and html to the directory
but it still doesn't work. Can someone help me please?
this is how it shows:
CODE ; #header{height: 93px; overflow: hidden; background:
#018CBB url(../images/
header-bg.gif);}
THANKS GUYS

On Wed, 13 Jun 2007 18:04:19 +0000 (UTC), "LuisDesigns"
<[email protected]> wrote:
>hey guys, i have a website that i need to add a flash
logo that i created,
>currently it has a gif logo, i tried changing it on the
css to swf and
>uploading both, swf and html to the directory but it
still doesn't work. Can
>someone help me please?
You cannot use Flash as a background. The only way to do it
would be to
insert the Flash movie into the HTML page, rather than as a
background.
Gary

Add a logo to the header definition of an Interactive Report

Hi Folks.
Using Apex 3.1 and BI Publisher.
I am enabling an Interactive Report region to output to PDF & Excel.
Has anyone managed to add a logo to the Header/footer definition in the Print Attributes section?
Is it possible? The region definition does not understand simple HTML syntax.
If anyone would let me know if a) They've done it or b) It ain't possible that would be great.
Many thanks.
Dogfighter.

Just reading through this thread. So perhaps a few comments might be helpful:
- Interactive report regions do currently not support Report Layouts, you're limited to the built-in generic layout and won't be able to include images
- You can add a button to your interactive report region page which could initiate the download of a report query, when doing this, you would get the result set of your report query not the interactive report region, so even if the queries are the same, you might have different filters applied to your interactive report
- You can in fact include static images in your RTF report layouts using the BI Publisher Desktop Word Plug-In and MS Word, so you can have logos etc in your PDF documents. But report layouts currently only work with report queries and classic report regions
- You can also include dynamic images in your PDF, e.g. based on images stored in a BLOB column, there's currently a character escaping issue causing some trouble with this, which will be fixed in 3.1.1, more on that once 3.1.1 is out (soon)
- the print server overwrite is designed to point to a different print server than the one configured for your APEX instance, not to point to a specific report. So if your instance has BI Publisher configured, but for a specific report you want to do some special rendering using your own code, you can write e.g. a JSP, Servlet, etc that's doing the rendering, and then point yout report to that URL
Hope this helps, we do plan to add support for report layout to interactive report regions in the next full release of Application Express
Regards,
Marc

How can I put an image in the page header so that it will be repeated on every page?

Hi to everyone!
I want to create a Pages template with the logo of our company in the page header.
I'd like to put that image (logo) in the page header so that it will be repeated on every page but it will not modify the content of the page.
Anyone know how to achive this, or something similar without have to copy-paste that image every time we add a page to the document?
Thanks in advance

Takashi,
Turn off the Page Headers (not absolutely necessary, but since you don't need it, why not)
Put your Graphic on the page and make the following settings:
Then Insert > Text Box and make the same settings as for the graphic.
Place your "Header text" in the text box and arrange the box and graphic as you want them. Move both to Section Master using the Arrange menu.
Jerry

How to change the page header?

Hi,
I just installed and started using Plumtree 6.0 a month ago, and we are still in a trial phase for our company's portal.
I want to change the default page header to replace Plumtree logo to my company's logo. I thought I can change it in the style sheet, but I didn't find where to change in the cssmill folder. I found an artical in edocs.bea.com saying I can modify the header by using ALI Publisher, but I don't know what's the right way to do it and faster.
Can someone guide me how to change the page header?
Thank you. (if this is not the correct forum to post the question, please let me know which forum should I go)

Depends on what you want to do. Personally, I'd do a header portlet and not touch the Plumtree/BEA logos. They're likely to be overwritten when the product receives updates.
This may seem like a lot of steps, but really - it goes quickly
** Think through what you want to display. If all you want to do is replace the image, but you wan to keep the overall layout style then you can create a simple replacement header
Step 1 - create a header portlet
=======================
If you're using Publisher...
=====
* Create a new portlet - choose the Header portlet template
* Upload your image / change the header in the rich text editor
If you're not using Publisher
=====
* Personally, static HTML will do just fine - create a folder and html file called something like "mybanner/mybanner.htm" on your remote portlet server
* Plop in an image (you'll want to swipe some adaptive tags for community and page name - can always stick those in later)
* Create a new remote portlet web service that references this HTML page
* Create a portlet from the web service - make sure the type is "header"
Step 2 - turn it on
=======================
* Create a new experience definition (or modify default - I usually create a new one so you can move it between environments)
* In the experience definition's "header / footer" settings area, tell the header to load from the new header portlet you created
* If you created a custom experience definition, modify your experience rules to load this experience defiintion according to whatever parameters you think make sense (just be careful you don't knock out your login page - we usually use security groups to just say "hey - the user is logged in and is, in fact, a member of this portal - that'll still let your login pages load)
Done
May seem like a lot of work, but really it's just a series of simple steps. Advantage here is you can vary things as you see fit and also just feel safe that the next time Plumtree/BEA updates those imageserver files you'll be good to go. From there you can get as fancy schmancy as you like using adaptive tags, etc. Heck - make it a .NET app if you want and do some crazy personalization or something. Embed stock tickers, important news alerts, whatever.
That help at all?
Thanks,
Eric

Different Page Header

Hi,
I am working in AR Invoice Report. The requirement is to print the invoice along with terms and condition, which is the last page. We don't require the logo and company information to appear on the terms and condition page. For this we have used page header in invoice page. But how can I remove the page header in the last page. Or can use a different page header in the last page.
We tried <?start@last-page:body?><?end body?> and section break before that in the last page. But the problem is when the invoice information overflows, it appears in the terms and condition page. and the header information is lost for that. and a page break before <?start@last-page:body?><?end body?> raises an error.
Any help will be apprciated.
Satyajit

Nice little guide to "different first page", vetsrini. Do you know if this is supported with RTF output? I have no problem getting a different header, when the output is in pdf, but when I try to output in RTF, the first header is repeated on the following pages. Is this not supported for RTF?

Print PDF - Add image to page header

Using APEX 3.2.1.00
Oracle 11g
FOP printing support
I need to include a logo on my PDF reports. I know I can put text on the heading of the report but how do I add a logo or image to the report header?
Thank you in advance!

In the page header section of the Print Setup, can I just reference a loaded work space item. Something like: #WORKSPACE_IMAGES#Shield1inch.JPG
If so, what is the syntax to it. I know I can reference application items like &APEX_USER.
Thank you
--rolf

How to hide Application page header depending on REQUEST value

Hi All:
APEX 4.0
I have created an APEX application (authentication is public) using Theme 20. This application has Page Header section. Below is the body definition from "One Level Tabs" page template used for this applicaiton.
<div id="t20PageHeader"">
<table border="0" cellpadding="0" cellspacing="0" summary="">
<tr>
<td id="t20Logo" valign="top">#LOGO#<br />#REGION_POSITION_06#</td>
<td id="t20HeaderMiddle" valign="top" width="100%">#REGION_POSITION_07#<br /></td>
<td id="t20NavBar" valign="top">Welcome &APP_USER. #NAVIGATION_BAR#<br />#REGION_POSITION_08#</td>
</tr>
</table>
<div id="t20Tabs" class="tablight">#TAB_CELLS#</div>
</div>
<div id="t20BreadCrumbsLeft">#REGION_POSITION_01#</div>
In our CRM application, we have create an iframe to show this apex application using this URL:
http://ke4000dev.xxx.com:8040/pls/apex/f?p=BIEXPRESS:1::*CRM*
As you can see the REQUEST = CRM
I need implement the following in this APEX:
If Request = 'CRM' then
hide Page header
else
show Page header
end if;
Can you suggest a solution for doing this?
Basically when this APEX application is displayed in our CRM iframe, we want to get rid of logo (part of page header) to save some space.
Thanks in advance!
Edited by: Kevin Zhang on Oct 4, 2012 11:41 AM
Edited by: Kevin Zhang on Oct 4, 2012 11:59 AM

Create a Dynamic Action:
When
Event: Page Load
Condition: -No Condition -
True Actions
Action: Hide
Selection Type: jQuery Selector
Affected Elements: #t20PageHeader
Condition
Condition Type: Request = Expression 1
Expression 1: CRM

HT201412 my phone goes in to recovery mode and flash logo connect to itune, when i connect to itune the msg disply update software and i click that than dwnld software to itune, when software dwnld and installing to my phone after smtime msg disply "error

my phone goes in to recovery mode and flash logo connect to itune, when i connect to itune the msg disply update software and i click that than dwnld software to itune, when software dwnld and installing to my phone after sometime msg disply "errore no. 21" and software not install to my phone

From TS3694:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Flash Logo and General Flash in Iweb 09

Help
Does any know how to insert Flash Logo's or general flash into Iweb.
I have been on all the relevant sites and tutorials, trying every which way, but none works.
It still keeps asking for AC_RunActiveContent.js which is there.
So i am confused and still no further forward
Is there a flash guru in these disussions that does this all the time and will tell me Exaclty how to do it.
Thanks very much
Hutchy
www.thickskinnedband.com
www.thickskinnedband.com/forum

The page for the forum link below is missing the following file:
http://www.thickskinnedband.com/forum/styles/twilightBB/template/styleswitcher.j s
While viewing the page in Safari type CommandOptionA to bring up the Activity window for it which lists all files.
It evidently didn't get uploaded.
OT

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....

Master Page Header and Footer in Page Viewer Web Part

Hi.
I created a View in Pages Library to view specific folders.
After that i added one Page Viewer web part to one of the aspx page.
There in the Page Viewer web part properties Link i have provided the url of the view.
It is displaying the folders but at the same time it is displaying the master page header and footer inside the web part.
Now i need to display the folders alone inside the Page Viewer web part.
Please let me know how to exclude the master page header and footer inside the Page Viewer web part?
Regards,
Sudheer
Thanks & Regards, Sudheer

I think that is the default behavior of the page viewer webpart.
In the page viewer web part,your just enter the url of the website.So that is treated as webpage and it is displaying as per page.
http://meritsolutions.com/meritmatters/archives/576-Displaying-a-File,-Folder-or-Web-Page-in-the-Page-Viewer-Web-Part.html
If you want to display a folder, type in a network path to that folder under Link and the folder content will be displayed.
Find the more details about page viewer webpart in msdn
http://office.microsoft.com/en-in/sharepoint-server-help/page-viewer-web-part-HA010024045.aspx

Flickering Flash Logo in page header

Similar Messages

Maybe you are looking for